Changing a software into a Labview Programme

Hi all,
I am new to LabView and would like some help in changing a software into a Labview Programme. 
The PC software is a platform that enables a PC to control a R/C transmitter. It is written in C# therefore I need to change it into LabView for my project.
For more information about the software you can download it from the following link: (http://www.min.at/prinz/?x=entry:entry130721-182227) 
It is under the PC control software section.
Thanks for all the help!!! 
Attachments:
TX Control.png ‏128 KB

Welcome to my world.
I have been working on a project (not a school project, a work project) for a while now to emulate a set of C/LabWindows programs to LabVIEW.
"Why?" RavensFan asks. Because the software on the instruments we build needs rapid updating as the instruments are updated, doing this in C is always a major task (it is thought that using LabVIEW should [eventually] be quicker and less prone to error), and we are a small company which cannot afford the luxury of a staff of C and/or LabWindows programmers.
But what RavensFan says is true. You have to figure out exactly what the C# program does and how to do the same thing in LabVIEW. You cannot do a transliteration by any means, it will come out like some of those old Japanese instrument manuals transliterated into English, and have just about as much use (i.e., none). But you have at least one thing in your favor, quite a bit of the C# code functionality can be replaced with very simple LabVIEW code.
As to understanding the C# code, well, you just might have to grab one of your buddies and bribe him with pizza (the Universal Currency for students) to walk through it with you until you can understand the flow of the program. This may take more than one pizza and/or night.
One thing, remember to make your LabVIEW code modular (i.e., using subVIs for common tasks) so you can (1) fix one bug and have it corrected in many places at once, and (2) build VIs which don't take up acres of screen real estate - there is little that is so frustrating (to me, anyway) as having to skip back and forth over a 9000x2600 pixel screen to troubleshoot code.
Best of luck,
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

Similar Messages

  • Can I integrate my exe program into my LabView software?

    I developed a LabView software. Can I integrate my old xx.exe program into this LabView software? Any information on this point would be appreciated.
    Yun

    The way to do this is to redirect the text output from the program to a file, and then read the file into LV. I unfortunately don't have all the information with me, but do a search in the archives here. The way I learned about is was a discussion a couple years ago. You can also check online for information related to writing DOS batch files--which is how you actually run the DOS program--that should get you pointed in the right direction.
    So it is possible, messy, but possible.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • LabVIEW programmer for Sound Measurement & Analysis software

    Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 10 years and our continued growth has created an opportunity for a LabVIEW programmer to join our programming team.
    This position reports to the Software Manager. Duties include, but are not limited to:
    • Designing and coding new Sound Measurement and Analysis software
    • Improving, reviewing and de-bugging existing code
    • Preparing internal and user technical documentation
    • Testing code
    • Interfacing with management, sales teams and customers to define tasks
    Required skills / education
    • Strong background (3+ years) in large-scale LabVIEW programming
    • Bachelor’s degree (Masters preferred) in engineering, computer science or similar subject
    • A methodical, user interface-intensive approach to coding, testing and documentation
    • Competency in Visual Studio, .NET and database programs is an advantage
    • The ability to work to tight deadlines
    • The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
    • Previous experience or an interest in acoustics or sound and vibration engineering is an advantage.
    • Minimum 2+ years in a similar technical position (5+ years preferred).
    Listen is a small, dynamic, and growing company, located in Boston’s historic South End. We offer all the benefits of a small company, combined with the security and stability of a software company that has been in business for over 10 years and sells to most of the world’s major loudspeaker manufacturers. Our customer list includes many of the world’s major loudspeaker and telecommunications manufacturers. Please visit our website, www.Listeninc.com, for more information about our products and markets.
    Benefits include a competitive salary, healthcare, paid vacation and a retirement plan.
    Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.
    To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Labview Programmer Position (NI Board).

    Are you open to consultants? I'm currently in Northern NJ and I could work on-site in Boston, MA 3 days a week / 30-35 hrs a week. I have a BSEE, I'm a US Citizen with an Active Secret Clearance. I have over 10 years of experience with LabVIEW and 5 years of experience with TestStand. I'm also very comfortable working with Test and Measurements Instruments.

  • Now that i have installed the software how do i change a pdf into a word doc

    now that i have installed the software how can i change a pdf into a word doc

    Hi patm23422687,
    I hope by saying 'installed the software', you mean that Acrobat XI is now installed on your computer.
    Now, open the PDF in Adobe Acrobat and choose "File> Save as Other> Microsoft Word"
    This is all you need to do
    Please try and let me know if you need further assistance.
    Regards,
    Anubha

  • HT6030 Since I did the update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Since I did the Mavericks-update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Hey Lukas Schmid,
    The following resource may provide more help in troubleshooting Mail for OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    For more information, you can also visit http://www.apple.com/support/mail/
    Thanks,
    Matt M.

  • Labview Programmer Job Opening - Santa Clara, CA

    Software
    Engineer/LabView Programmer
    OptiMedica
    is looking for an experienced Software Engineer/LabVIEW Programmer to support
    the development and production of its expanding line of innovative ophthalmic
    instruments.  Candidate must be familiar with LabView programming and Software
    best practices, be familiar with medical device environment and its
    regulations, and have the ability to quickly solve challenging problems.  Candidate will function as a key software architect
    for complex medical systems. 
    Strong skills and
    experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
    level applications on Windows operating systems are required in order to develop
    automated test, measurement, data acquisition, and control systems.  Must be able to work with limited
    guidance/supervision and be able to test, evaluate, document, qualify and
    release designs for complex projects involving medical laser equipment in a
    focused, highly collaborative multidisciplinary environment.
    Skills/Experience
    Requirements:
    o   
    Highly
    developed problem solving, communication and collaborative skills.
    o   
    At
    least five years experience developing automated test, measurement, data acquisition,
    and control systems using LabVIEW.  Experience
    developing OEM products a plus.
    o   
    At
    least five years experience working with product development team to transfer new
    products into production for commercial sale. 
    o   
    Key
    participation in the test and integration of successfully shipped medical
    products is strongly preferred.
    o   
    Successful
    track record delivering innovative software solutions to complex problems.
    o    Familiar with
    Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
    Medical Equipment.
    o   
    Fast
    and eager at learning and applying new technology.
    o   
    Familiarity
    and experience with verification and validation phases for medical device
    software.
    o    Knowledge, experience
    and understanding of software development standards.
    o   
    Experience
    with lasers, optics, motion control, and image processing.
    o   
    Experience
    with National Instruments hardware (especially FPGA); experience with a variety
    of programmable instruments a plus. 
    o   
    Experience
    using structured, specification driven, requirements-based approach to software
    design and development.
    o    Must be well
    organized and enjoy working in a dynamic environment.
    o    Facility with Qt, MATLAB and C++ beneficial.
    Responsibilities:
    o   
    Design,
    develop, qualify, implement and release designs for FDA-approved medical laser
    equipment using LabVIEW.
    o   
    Support
    R&D, Production, and Field Service of FDA-approved medical products in the form of
    automated tests and control systems using LabVIEW.
    o   
    Participate
    in design review and hazard/risk analysis meetings.
    o   
    Create
    test procedures to verify the safe and proper software operation of FDA-approved
    medical products.
    o   
    Pursue
    continuing education and certifications, including NI Certified LabVIEW
    Developer and Architect.
    o   
    Work
    in a team environment with other engineers (of varied disciplines) as well as executives
    and manufacturing personnel to sustain existing products and deliver new
    products to market.
    o   
    Apply
    software principles and concepts to evaluate new designs for function and
    performance.  System integration of new
    components and designs into high performance optical and opto-mechanical systems
    and sub-systems.
    o   
    Collect/
    review data and communicate both status and recommendation on technical issues
    by preparing technical reports and presentations.
    o   
    Initiate,
    execute & review product changes via OptiMedica’s ECO process.
    o   
    Provide
    continuous support for manufacturing and resolve complex manufacturing issues.
    o   
    Develop
    test methods, system test procedures and create test and qualification reports
    for new product introduction.
    o   
    Reports
    to Director of Product Development.
    Education Requirements:
    o   
    Bachelor’s
    degree in Computer Science, Electrical Engineering or equivalent strongly
    preferred.
    Site Location/Contact
    Information:
    o   
    Santa
    Clara, California
    Note:
    Candidates must be legally authorized to work in the United States.
    NOTE:  This job description is not intended to be
    all-inclusive.  Employee may perform
    other related duties as negotiated to meet the ongoing needs of the
    organization. 
    Contact:
    Debbie Goedicke - 650-585-6784
    [email protected]

    Labview Programmer

  • How can i change analog waves into digital waves?

    we had labview lab last week.. were doing fine if we have instructions unfortunately the professor will give us an exercise regarding baseband signals spectra.. were trying to download a trial software but we dont have any luck. the question asks for us to change analog waves into digital waves, measure the amplitude of the 5-th harmonic using spectrum analyzer.. i hope you can help me thnx..

    After you are successful getting LabVIEW on your computer, put together something to at least show us you're up for learning.  Then we can guide you to a solution that you've developed (mostly) on your own. 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • LabVIEW programmer with modular instrumentation experience (short term) in NYC area

        We have a requirement
    for a short term (3-12 months) contract to develop LabVIEW based software
    around modular Instruments (e.g. laser, APD, photon counting) hardware. The
    work can be done part time or full time, but the person must be able to come to
    the lab in NYC. The candidate should have significant  knowledge and
    experience.  Send resume and contact information to [email protected]

    Hi Mr Weaver
    I found this message posted in March , I sincerelly hope you satisfied your needs for a labview programmer / analyst.
    We are a group of three engineers dedicarted to the mechnical and electrical design of industriy solutions. Currently full time employed as a Sr test engineer with a firm in the Chicago suburbs, I develop applications in labview to automate testing for design validation which range from mechanical, electrical, functional, regulatory , environmental and RF including sound and vibration testing. I have been writing atomated test cases for the last 15 years in environments, using tools like high level text programming languages and Labview to integrate test equipment into automated test systems using RS232,USB,GPIB ports for high volume manufacturing testing of subassemblies and finish goods.
    Our experienced electrical engineeer develops process control solutions around PLC, DCs and SCADA tools for the farmaceutical, food and beverage industries with proven record of oversees experience for the last 10 years. 
    Mechanical Engineer also currently employed as design engineer in the Chicago area with experience in design tools like Pro E, participate in the mechanical design of the integrated systems, drawings and schematics.
    We can offer an integral solution to your current and future needs for engineering services.
    Martin Ayala
    [email protected]
    (630) 596 3929

  • I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

    HI All
    I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
    I used IMAQ AVI Read Frame VI
    for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

    Hi abdelhady,
    I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
    There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
    Thank you,
    Emily C
    Applications Engineer
    National Instruments

  • Upgrade from sqlserver 2008 to sqlserver 2014, can I put software into different drive other than C: ?

    Originally my sqlserver 2008 software was installed into E:, but I didn't see any drive selection options available during the upgrade steps, so now my sqlserver 2014 is installed into default C: drive.
    If there are any ways to specify different drive ?
    Thanks
    Sophia Su

    “Upon doing the initial upgrade, can I designate the target drive/letter”? 
    I didn’t see  a place to change it in the upgrade process.
    I don't want to uninstall sqlserver 2008, I just want to upgrade from 2008 to 2014 and be able to put the sqlserver 2014 software into the same drive (not C:) as my sqlserver 2008 is.
    If previous version was on E drive upgraded version should remain on E drive as well. AFAIK there does not comes an option to specify different drive letter when doing in place upgrade how ever if you do side by side upgrade you can install new instance
    of 2014 on what ever drive you like
    In side by side upgrade you have to first install SQL Server 2014 and then move databases using backup and restore then migrate logins and jobs using scripting method.
    After you are sure your upgrade process is complete you can uninstall 2008 instance.
    How do you check your SQL Server 2014 is installed on C drive. Please  note even if you install SQL server on some other drive(like D,E..) some binaries always go on C drive thet nature is by default , if you are looking at binaries then its wrong to
    deduce that your SQL Server is on C drive.
    Can you go to E drive can you see program files..Microsoft SQL Server ?
    Please also read file location of Installed SQL server Instance
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • LabVIEW Programmer Full Time Position, Livonia, Michigan - Join are team of programmers

    LabVIEW Programmer POSITION
    Revolutionary Engineering, Inc. is dynamometer testing systems integrator and services company.  We provide systems and services for the automotive industry as well as in-house dynamometer testing.  We currently have a position open for a LabVIEW Programmer.  A brief description of the positions responsibilities and benefits are summarized below.  If you are interested please e-mail me at [email protected]
    Position Available
    Full Time LabVIEW Programmer
    Requirements
    Bachelors Degree
    LABVIEW programming experience, CLD a plus
    AutoCAD Experience a plus
    Experience with Microsoft Office Software
    Ability to work with other technicians, engineers, and customers
    Ability to communicate technical information both verbal and written
    Responsibilities Include (but not limited too)
    LabVIEW Programming
    Control System programming and interfacing
    Design and build assistance on dynamometer systems
    Electrical and mechanical print review
    Benefits
    Paid Vacations
    Full Medical
    Paid Sick Days
    Competitive Salaries
    Please check out our website at www.revoleng.com
    regards,
    Daniel E. White
    Revolutionary Engineering, Inc
    36865 Schoolcraft Rd
    Livonia, MI48150

    Dear Sir,
    I learnt about your need for LabVIEW Programmer from your company’s website. I am interested in this job profile which is mentioned in your website. Moreover I aspire to work in a technical company of my field.
    I believe that my LabVIEW knowledge and my education background are appropriate for your requirement , I am attaching my resume for your consideration.
    Thanks in advance.
    Regards,
    Devi S.
    Programmer analyst trainee,
    Cognizant technology solutions,
    Chennai.
    PH: 91-09789069507
    Attachments:
    Devi_Sadasivam.doc ‏48 KB

  • LabVIEW programmer needed for full time position, Orange County CA

    Anaheim CA 92801
    [email protected]
    Job Title: Project Manager
    Job Type: Permanent
    Job Location: Anaheim CA
    Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)  
    Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
    Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
    40 hrs/wk at our Orange County facility.
    What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
    Salary Offered: $60K-80K based on experience and qualifications  
    The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
    Attachments:
    ETU and Staff.jpg ‏186 KB

        Bill,
    We are able to offer you the help you need on
    this.  I work for a LabVIEW/test-system consulting group based here out
    of Salt Lake City...not too far if a quick trip is needed.  Among the
    six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
    contract work, local and remote.  This sounds interesting and right up
    our alley as far as experience goes.  I'd refer you to our website for
    further info about different projects that we've done for many
    clients.  www.mooregoodideas.com.
    If this seems workable for
    you, feel free to shoot me a note at [email protected]  I'd be
    curious to know more about what you're after and how we can help you
    out. 
    Thanks,
    Jim

  • LabVIEW Programmer – Enable Integration

    Enable Integration (a division of Enable Training and Consulting, Inc.) is seeking a LabVIEW programmer to join our integration team and immediately be a core part of several projects.  Today, we are a team of 20 employees and have a diverse range of clients: Bosch-Rexroth, FIRST Robotics, University of Waterloo, LEGO Education, National Instruments, and Solid Works. 
    We are a dynamic employer with a flexible working environment and atmosphere.  Our integration team specializes in consulting and providing custom hardware and software solutions for test, measurement & automation applications for worldwide clients in a variety of industries.  Our team has over 65 years combined programming experience and have worked on projects both large and small, and have recently been recognized as a National Instruments Alliance Partner with exceptional technical resources at NIWeek 2013.   Please visit www.enabletc.com for more information about the company.
    Duties & Responsibilities:
    We are looking for a self-motivated LabVIEW programmer who will excel in a fast-paced consulting environment, will excel to meet deadlines and ensure the success of our customers.  We are looking for someone who has recent experience developing application using LabVIEW.
    Your primary efforts will encompass all stages of software engineering application design, including:
    Requirement definition and gathering, Specification writing
    Systems Design & Architecture
    Algorithm development
    Documentation (Code and Project Management)
    Unit, Functional, Validation & Verification Test
    Deployment & Application Support
    This is a full-time position and candidates will be expected to work out of our Milton, Ontario head office.
    Desired Skills & Experience
    4-year technical degree, or 3-year technical diploma from accredited colleges or universities
    Experience programming hardware and/or software applications using LabVIEW
    CLAD/CLD/CLA certifications are an asset
    Discipline and organization with respect to software maintenance and version management
    Experience with source code control & source configuration management tools a plus (TortoiseSVN ideal, however will consider applicants with working knowledge of Perforce, ClearCase etc.)
    Strong troubleshooting and debugging skills
    Understanding of basic signals and systems concepts
    Sensors and actuators
    Analog and digital signals
    Data acquisition concepts and hardware
     Communication protocols
    Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
    Self-motivated team player
    Effective time management
    Strong written skills in English
    Code documentation, Project management & Progress Reports
    Team communication/updates
    Immediately eligible to work in Canada at time of application
    Pay is commensurate with skills and qualifications of the applicant.

    Kindly specify the email address to apply to for the mentioned job

  • LabVIEW Programmer​s needed in Detroit

    Greening is looking for multiple LabVIEW programmers with some experience.  Below is our job description.  You can contact me directly at [email protected]
    LabVIEW Developer / Design Engineer
    Job Description
    The LabVIEW developers at Greening work in a cross functional team environment under multiple Certified LabVIEW Architects that guide and train the developers.  Developers spend the majority of their time programming Test and Automation applications in LabVIEW™.  Developers also participate in the system design including the selection of sensors and data acquisition hardware.  Developers are required to travel for the commissioning or startup of their projects.
    The successful candidate will be a motivated fast learner as this is a fast paced and growing group.  Developers will be tutored through the National Instruments certifications for LabVIEW.  This is an ideal position for a programmer or engineer that is seeking to become an expert LabVIEW programmer.
    Education Preferences:  BSEE, BSCE, or BSME
    Experience in the any of the following technologies is helpful:
    Hardware: National Instruments PC Based DAQ, FieldPoint, PXI, IOTech DAQ, Embedded Controls, Industrial Computers, sensors, and wiring
    Software: LabVIEW, TestStand, Visual Basic, CAD programs (AutoCAD, TurboCAD)
    Integration: Data Collection, Motion Control, Real-Time Embedded Systems, Machine Vision, Industrial Automation, Distributed Control Systems, Database Design, SCADA Systems, Sensor Selection, Signal Wiring Methods

    Dear Sir/Madam,
    This is in reference to your mail regarding job vacancy at your esteemed organization. This kind of opportunity, which I am eagerly waiting for. I am very confident that I can prove my excellence if I get an opportunity in your organization. Being an enthusiastic engineer, I look forward to working with your organization, where in I undertake to put my abilities, skill set and experience as an input and the growth of my career and company name and profits as my output.
    I have a sound and 4+ years of constant exposure towards Software Development in LabVIEW and TestStand.
    I am a Masters graduate in Electrical Engineering and I am Certified LabVIEW Associate Developer (CLAD). Expertise programming with hardware interfaces like VISA, GPIB, PXI, USB...etc and I offer myself with flexibility in working and relocation is not a constraint for me.
    Presently I located in Germany and working with National Instruments selective Partner company. I am very much enthusiastic to relocate to USA.
    My resume is available upon request. Please mail me at [email protected] I will be at your convenience.
    Thanking you Sir/Madam,
    With Kind Regards,
    Sashidher Gundogi

  • Experience​d Labview Programmer Needing Job in US

    Hello,
    My name is Rollin, I have been working in for a European research facility in
    Grenoble, France as an Electronics Engineering Technician for 8 years.
    I have 3 years Hands on experience with Labview, for instrument control and
    data acquisition through serial, Hpib and Daqcards. I' m in Atlanta, but I will
    relocate anywhere in the US If someone hires me. I have enclosed my resume here
    after.
    Thank you for your time and consideration.
    INSTRUMENTATION LABVIEW SPECIALIST
    Mr. Rollin S. McCarty
    4941 Central Drive, Apt. 705,
    Stone Mountain, Georgia 30083
    Phone: 770-413-4092
    E-mail: [email protected]
    PROFILE
    Broad knowledge of control systems, electronics and instrumentation.
    Labview Programming Expert (3 years hands on experience).
    Excellent Documentation skills.
    Bilingual French-English. US Citizen.
    DETAILS
    Hardware:
    Design, development, installation and maintenance of PC based automation
    solutions used in the fields of data acquisition, motion, process and
    instrument control. Includes analog & digital circuit design, use of
    electronics CAD simulation tool (SPICE), together with general purpose
    electronic test equipment.
    Software:
    Design, development of Labview software, including low level instrument drivers
    - using serial and HPIB protocols, plus various I/O analog and digital
    interfaces - data processing and program logic, as well as menu driven user
    friendly GUI.
    Documentation:
    Production of comprehensive yet attractive and understandable documentation.
    HTML skills. MSOffice.
    EXPERIENCE
    European Synchrotron Radiation Facility, FRANCE
    Computer & Electronics Engineering Specialist,
    1991- 1999
    Provided scientific research institute survey team using a large variety of
    state of the art survey equipment with turn-key automation solutions, leading
    to an increase in quality as well as in quantity of the production.
    Caterpillar, FRANCE
    Mechanical Methods Specialist,
    1989- 1991
    Training and support of fifteen mechanical computer draftsmen for their
    corporate CAD tool. Provided manufacturing shop information regarding new
    technologies.
    Caterpillar, FRANCE
    Electrical & Mechanical Technician,
    1988- 1989
    Preventive and break down maintenance of bulldozer girder welding robots and
    associated machinery.
    EDUCATION
    Cuefa & Learn. Tree, France - Java bases & Networking, 80 hour training, 1999.
    Esrf, Grenoble, France - Labview, 40 hour training, 1996.
    French equiv. to AS/BS, Grenoble, France - Computer Programming, 1992.
    French equiv. to AS/BS, Grenoble, France - Electronics, 1988.

    You probably already have a job, since this was posted in 1999.. But if you don't, we are looking for a labview programmer at Brown University in Providence, RI. It is a part-time position for data acquisition/analysis. we study sensory processing in the brain.. let me know if you are interested: [email protected]

Maybe you are looking for