Changing a timeline from 24fps to 30 fps after project started

HELP! I've somehow started a project with a 24 fps timeline when it should have 30fps. I just recently noticed my 1080/60i footage was playing back with a bit of a judder and then saw that the timeline had the wrong frame rate.
Anyway I can correct this without losing what I've done? Or start a new project and copy over what I've done?

You may wish to use MPEG Streamclip to convert 24fps to 29.97fps. It seems to work rather well.
look at www.squared5.com for the most recent mac compatible version: 19.9.3b4 beta. You'll also need to look at the instructions for any additional plug-ins.

Similar Messages

Changing stage timeline from inside a movieclip button

I create a movieclip button, and I want to change main timeline from it. what should I do ?
Is it useful to use MovieClip(root).gotoAndPlay(...) ; ?
Is there any other way to change main timeline?

Example:
Add something to trigger the event in the child:
dispatchEvent(new Event("eventTriggered"));
In your parent swf, listen for the event using a listener for the child with a corresponding event handler...
childName.addEventListener("eventTriggered", eventHandler).
function eventHandler(event:Event):void {
trace("child dispatched an event");
// gotoAndPlay(etc);

How can I automatically change my edited timeline from 24fps into 25fps?

Hello everyone,
I have a timeline in 24fps with 24fps footage. I have to convert it (the timeline and the footage) into 25fps, so I can put a 25fps Timecode in it (it was a 24fps 16mm film material and it has to be rescan in 25fps...). Is there a way to do that? I mean beside of reedit everything in a 25fps timeline. The footage was quicktime prores 4444, I made merged clips of it and edited it then, so I have only merged clips on the timeline.
I would be very thankful for any suggestions!

Hi Richard, unfortunately I need to burn in Timecode from the source clips, so this won`t help me:/ but thanks for your answer! I think the only possibility for me is to create a new timeline in 25fps, modify the source footage from 24 into 25fps and reedit it. Is there any way to use command match frame (and reversed match frame) from merged clips in a timeline to source material from which I created the merged clips? so the source footage and not the used merged clip will be loaded into the source monitor? it would make a reedit much much faster...

Change encore timeline from premiere pro cs5 via dynamic link?

I'm sure this has been covered before, but I can't find
anything on dynamic link in this forum.
I created my video in encore, and exported the sequence to encore via dynamic link.
I then created all my menus etc. in Encore, after which I noticed a couple of glitches I wanted to change, so I went back to premiere and edited the changes.
How do I get encore to pick up on these changes? It didn't happen automatically as I had hoped, and I don't want to have to recreate my menu structure again in Encore.
So, basically, how do I make a change in Premiere, and have it reflected in my Encore project without creating a new project?
thanks,
Andy

I have a similar problem:
I created a project in PremPro CS5, then used Adobe Dynamic Link which loaded into Encore
where I created menus then saved off both PremPro and Encore.
Today I opened each to make add some titles in PremPro, however, Dyn Link did not send them to Encore
as I assumed it would. How do I get link to do what I have been lead to believe it will do, that is, carry
over changes from PremPro to Encore?
(I tried "Revert to Original" botton suggestion but Encore does not give me this option.
Seems like a strange suggestion since I want to update not revert.)
Details would be helpful.
Thx

Weather Career Change is advisable from Non IT to SAP after 10 years of experience in Construction Industry

Hi,
I have 10 years of experience in construction industry.My area of expertise is in project management.I before 5 years I have a strong desire to work in IT industry. But not able to get a chance.But I need a career profile change to IT industry. So I choose to do SAp ps leaning *** certification from authorised training partner. module.please suggest
1. whether this is advisable.
2. Whether I need to resign from my current job.
3. What salary I can expect from SAP job profile, as my current salary is 7 to 8 lacs.
4. Whether I will get a job immediately after certification.
5. Howmuch SAP PS certification Job requirement in market.
Please advise.
Thanks,
Priyadarshan

Hi Sama,
Kindly go through below link and all you questions will be answered.
Career Center
Regards
D.Singh

Each clip is precomposed when dynamic linking a timeline from Premier

When I'm sending a timeline from Premier Pro CC to After Effects CC all of my video clips are being pre composed individually in the after effects composition.
The last project I worked on had the same workflow except when they came into after effects the videos were not pre composed.
From the PP timeline, I'm selecting all the timeline media and choosing 'replace with AFX comp!
Is there a way to choose to precomp everything or not from a Premier timeline? I don't want each media to be precomposed!

Thanks Todd,
I can see that's the case as I went from a 1080 timeline down to 720P and used 'Scale to Comp'
Causes havic in AFX if you have used different sections of the same clip in your edit.
So I guess the work around would be to manuelly scale everything in the clip settings.

Change a text field on the timeline from a class

Hi,
I need some help in changing the content of text fields that are on the stage of the main timeline from within an external class. I have created a countdown timer which is called from the Document Class. I think it is a problem with the scope of the variable but I can't work it out.
Main Document Class:
package
    import flash.display.*;
    import flash.events.*;
    import count_timer;
    import RectangleButton;
    public class main extends MovieClip
        public function main()
          [create a Start Btn]
            var startBtn_mc:MovieClip = new MovieClip ;
            addChild(startBtn_mc);
            var startBtn:RectangleButton = new RectangleButton("Start",90,25,18,0xCC0000,0x000000);
            startBtn_mc.x = 105;
            startBtn_mc.y = 200;
            startBtn_mc.addChild(startBtn);
            startBtn_mc.addEventListener(MouseEvent.CLICK,onClickStartBtn);
            function onClickStartBtn(event:MouseEvent):void
                var inputDay1:String = dayInputtxt.text;[these are input fields on the stage]
                var inputHr1:String = hrInputtxt.text;
                var inputMin1:String = minInputtxt.text;
                var inputSec1:String = secInputtxt.text;
                var counter:count_timer = new count_timer(inputDay1,inputHr1,inputMin1,inputSec1);
Countdown Timer:
package
    import flash.display.*;
    import flash.utils.Timer;
    import flash.events.*;
    import flash.text.*;
    import RectangleButton;
    public class count_timer extends MovieClip
//not sure this is correct
public var daytxt:TextField;
public var hrtxt:TextField;
public var mintxt:TextField;
public var sectxt:TextField;
        public function count_timer(inputDay1,inputHr1,inputMin1,inputSec1)
            var inputDay = inputDay1;
            var inputHr = inputHr1;
            var inputMin = inputMin1;
            var inputSec = inputSec1;
            var msinputDay:Number = Number(inputDay);
            var msinputHr:Number = Number(inputHr);
            var msinputMin:Number = Number(inputMin);
            var msinputSec:Number = Number(inputSec);
            var ms:Number = Number(msinputDay);
//convert input to milliseconds
            ms = ms + msinputDay * 24 * 60 * 60 * 1000;
            ms = ms + msinputHr * 60 * 60 * 1000;
            ms = ms + msinputMin * 60 * 1000;
            ms = ms + msinputSec * 1000;
            addEventListener(Event.ENTER_FRAME, loop);
            function loop(e:Event):void
                ms = ms - 1000;
                var sec:Number = Math.floor(ms / 1000);
                var min:Number = Math.floor(sec / 60);
                var hr:Number = Math.floor(min / 60);
                var day:Number = Math.floor(hr / 24);
                sec = sec % 60;
                min = min % 60;
                hr = hr % 24;
                daytxt.text = day.toString();[everything appears to work to these variables. I think it should be root.]
                hrtxt.text=(hr<10)?"0"+hr.toString():hr.toString();
                mintxt.text=(min<10)?"0"+min.toString():min.toString();
                sectxt.text=(sec<10)?"0"+sec.toString():sec.toString();
           if (ms <= 0)
                    removeEventListener(Event.ENTER_FRAME, loop);
                    gotoAndPlay("TimesUp");
Many thanks in advance.

Your code is not going to work as you show it. First, you should not be putting your class methods inside the constructors... And yes - scope. You make your new count_timer as a local variable inside a function that is called on click. Essentially, the timer is gone just as fast as it's created. If you want the timer available to the other methods in the class it should be declared as a private var in the class definition.
And I agree with kokorito - have your timer extend EventDispatcher and then it can do like: dispatchEvent(new Event("myTimerEvent")); and you can then add an eventListener to it when you create it in your main class. You just listen for "myTimerEvent" or whatever string you use, and call whatever function you want - just like using any other listener.

25fps timeline in 24fps convertion

Hi there,
I have a 25fps timeline with 25 fps footage. I need to export this timeline in 24fps, so I chaged the sequence settings from 25fps to 24 fps. Now I have to interpret the footage from 25 to 24, when I do this, the footage on the timeline changes , but the edit points don`t, which means I have to make every clip on the timeline a little bit longer, which of course takes much time and I also have some subtitles (as titles) in the timeline and I`m not sure how to do it, so they will move with the video footage to the new location on the timeline after interprating to 24fps...

Sorry but I don't know correctly, but I suposs if you work in a sequence 24@25 it's possible allow this operation... if you need a sequences 24fps to export a 25 videotape you need make a quicktime movie, and then open it in after effects and change the main properties... I hope to help you.

Simple Change Parent Timeline AS3 problem

I am just trying to use actionscript 3.0 (Flash CS4) to change the 'Parent' timeline from a button in the 'Child' timeline
root/
parent_mc/
child_mc (button called btn is there)
This code is in the child_mc timeline above the button
btn.addEventListener(MouseEvent.CLICK, changeParentTimeline);
function changeParentTimeline(event:MouseEvent):void
this.parent_mc.gotoAndStop(10);
The above produces this error:
TypeError: Error #1010: A term is undefined and has no properties.
at Untitled_fla::child_2/changeParentTimeline()
Any help would be much appreciated.
Kind regards
Richard

Try:
btn.addEventListener(MouseEvent.CLICK, changeParentTimeline);
function changeParentTimeline(event:MouseEvent):void
MovieClip(this.parent).gotoAndStop(10);

BUG: Changing "alpha" with AS breaks other property changes on timeline

I've discovered a bug in AS3 where a Movie Clip that spans 2 different frames, but its properties are different in each frame (i.e. it has been repositioned on the 2nd frame but the instance name is the same), and the MC's alpha is changed using ActionScript prior to moving the timeline from one frame to the other, the timeline moves, but the MC does NOT actually move.
I'm experiencing this error in a professional project that I'm working on so I cannot post the actual FLA, but here is a little mock up that I made:
stop()
currentFrameTxt.text = currentLabel
var alphaChange:Number = .1
var alphaMax:Number = 1
var alphaMin:Number = 0
alphaUpBtn.addEventListener(MouseEvent.CLICK, alphaUp)
function alphaUp(evt:MouseEvent) {
    box.alpha += alphaChange
    if (box.alpha > alphaMax) {
        box.alpha = alphaMax
alphaDownBtn.addEventListener(MouseEvent.CLICK, alphaDown)
function alphaDown(evt:MouseEvent) {
    box.alpha -= alphaChange
    if (box.alpha < alphaMin) {
        box.alpha = alphaMin
leftBtn.addEventListener(MouseEvent.CLICK, gotoLeft)
function gotoLeft(evt:MouseEvent) {
    if (currentLabel != "left") {
        gotoAndStop("left")
    currentFrameTxt.text = currentLabel
rightBtn.addEventListener(MouseEvent.CLICK, gotoRight)
function gotoRight(evt:MouseEvent) {
    if (currentLabel != "right") {
        gotoAndStop("right")
    currentFrameTxt.text = currentLabel
On Frame 1 (labeled "left") is an MC with the instance name "box" and the box's position is on the left side of the stage. On Frame 11 (labeled "right") is the same instance "box", but its position has been moved to the right side of the stage.
I have a pair of buttons ('leftBtn" and "rightBtn") that toggle the timeline between the "left" frame and the "right" frame.
I also have a pair of buttons ("alphaUpBtn" and "alphaDownBtn") that change the box's "alpha" property.
If you click "leftBtn" or "rightBtn" before you click the "alphaUp" or "alphaDown" buttons, the box moves left or right as one would expect. BUT if you click either "alphaUpBtn" or "alphaDownBtn", the box does NOT move if you then click "leftBtn" or "rightBtn" even though the timeline is indeed moving (which I am confirming using the "currentFrameTxt" dynamic text box).
I have tried this example by changing other properties on the 2 frames and they too stop working once you change the "alpha" using AS. I have also tried change other propeties using AS, but alpha is the only property to breaks the other properties changed by moving the timeline.
Why would changing the "alpha" property suddenly break all other property changes on the timeline?
Now I know that one work-around for this bug is to simply change the box's position dynamically by setting the x and y positions, but this is NOT an option for this project because it is very important that the client be able to manually position the artwork on each frame by hand.
This is a serious bug and I'm wondering if anyone else has encountered it before and if they know of a viable workaround.

I did some more testing by changing other properties of the box with AS and it appears that for most properties, like alpha, x, y, rotation, width, height, etc, if they are changed with AS, then the properties of the MC can no longer be changed by the timeline settings. Changing the "visible" property has no effect, however.
It seems that this "bug" is not really bug so much as it is a fundamental misunderstanding on my part about the fact that you CANNOT change the properties of a symbol using BOTH ActionScript and timeline properties. I can only change the properties of using either the timeline OR ActionScript because as soon as I change the properties using AS, the MC becomes an AS-controlled object and can no longer be controlled via the timeline. I guess that makes sense, but it is frustrating nonetheless.
Colin, your suggestion to nest the MC inside another MC is indeed a successful workaround, at least for this little box example (see fixed FLA attached with the "left" and "right" timeline property changes nested inside the box itself) and I will see if it is a viable solution for my actual application. I'm guessing it will not be a problem for my client to simply navigate inside a parent MC in order to adjust the positions of the now-nested MC in question.
Thanks for the help.

Exporting Timeline from Speedgrade

I am working with Premiere Pro and Speedgrade CC. I find using the direct-link is fine but a bit limiting in terms of the full potential of Speedgrade. The direct-link from Premiere Pro also seems to slow up my system and grading becomes very clunky despite my 3.5Ghz i7, 3Tb fusion drive, 4gb graphics card, 32gb ram brand new iMac27 !
So I have exported my timeline from Premiere pro as an EDL and imported the clips natively into Speedgrade. I can now add grading layers etc and the processor seems to deal with this much better. Grading is fast and efficient working with the clips this way. The problem i have now is exporting from Speedgrade and getting my timeline back into Premiere Pro for finishing , titling etc and final export.
I have managed by default i think to export my timeline as individual clips using the PathElement-0 option from the Render panel ( i found this on a tutorial ) and the clips are saved in a folder as .mov files. When I import these back into Premiere Pro they are in a random order and not in sequence.
How can i now re-form my timeline from these clips in Premiere ?
I have tried saving an EDL from the Timeline tab in Speedgrade but this just refers back to the imported non-graded clips NOT the new graded clips in my Speedgrade timeline ?
Does anyone have a good Premiere Pro / Speedgrade roundtrip that excludes the Direct-Link to Speedgrade ???
Thanks
Best
Mark

Sorry to be so long in replying ... but here's my bit. Adobe's staffers have indicated they are moving from the "old" EDL process to the direct-link, and so ... it's not a heavily supported nor even considered part of the internal thinking process ... I think that's fair to say. Still available but not emphasized? I've noted the staffers don't tend to work here so much with internal-Adobe EDL questions, mostly for those who are clearly working with timelines from other sources and therefore MUST use EDL & XML importing.
I'm wondering if part of your slow-down issues are waiting until your editing is finished to edit-lock & THEN only taking a "final" timeline into Sg? Prior to the CC-model with the Direct Link so heavily incorporated, that was the ONLY thing that made sense. Now, it's so fast to buzz forth & back that working sub-sequences is becoming common and "standard" ... if for no other reason than Sg is faster in d-l mode with shorter sequences, rather than say working a single 87 minute sequence. My personal model is to take sequences over for basic correction early on, pretty much as soon as I've got them mostly sorted. Especially if I've got b-roll the quality or "feel" of which I'm not sure. (Some of my b-roll is provided by others ...) After seeing the way the look can be worked with each, I may even change some of my sequence editing choices. And playing back the full Master sequence in the Program Monitor I can see if I need to adjust any sub-sequences to better match.
As to using the old way ... I think using proxies might work better, but I don't have much experience with that. I know that was standard and most colorists knew how to do that sleeping. I did it a few times, and once or twice even got it right first off without futzing. Other times I was on here for questions, which got some raised eye-brow comments back & forth between the Experienced Masters ... "geez, dumb noob's anywayz ... "
SpeedGrade can do this, the controls are still there and pretty much unchanged if I never learned to decipher the Gobbledeegook Speak. Check out some of the tutorials for CS6 days, as that was still heavily used at that time.
Neil

My daughter has just changed her phone from an iphone to a nokia but when i send her a message it still comes up as an i message and she doesnt receive it?

my daughter has changed her phone from an iphone to a nokia but kept the same number but when i send her a message from my iphone it still comes up as an i messsage and she doesnt receive it can anybody tell me how to fix this please

She needs to remove that device from the iMessage database, or if she still has the phone, she can go into Settings, Messages and turn off iMessage. If she still has the phone, she just needs to put the SIM back in for a couple of minutes to turn that off.
If she does not have the phone any more, she will need to go to her Support Profile, if she registered the phone and delete the phone from the profile.

Why am I unable to change text color from black in LR5 book module?

Why am I unable to change text color from black in LR5 Book Module?

I'm assuming you clicked on the color patch besides the word <Character> to open the color picker window.
At the right side of this window there is a vertical bar that has 2 horizontal black lines at the bottom.
This is actually a slider. Pull it upwards with the color picker and color will appear in the window.

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

Not able to change sales stage from requirtement to reqmt analysis

in opportunity Not able to change sales stage from requirtement to reqmt analysis
Error Message:SBL-DAT-00284
Details error msg is:
Unable to evaluate workflow rule for foll reason
Update probability between 0 & 100%(SBL-ODS-00500)
Edited by: user1074008 on Sep 22, 2010 10:17 PM
Edited by: user1074008 on Sep 22, 2010 10:18 PM

Looks like a bug...
Previos Post Activity Status = Submitted - Access Denied

Changing a timeline from 24fps to 30 fps after project started

Similar Messages

Maybe you are looking for