Changing DB Polling Frequencies

Hi there,
is it possible to change polling frequency for DB Adapter without reploying the application? is it parameter configurable and can be changed at will?
Please let me know
KS

Hi,
The ActivationSpec properties will help in configuring the same...
<binding name="OracleInbound_binding" type="tns:OracleInbound_ptt">
<pc:inbound_binding/>
<operation name="receive">
<jca:operation
ActivationSpec="oracle.tip.adapter.db.DBActivationSpec"
DescriptorName="OracleInbound.CustomersUsecase"
QueryName="OracleInbound"
PollingStrategyName="DeletePollingStrategy"
SequencingFieldName="CUST_ID"
MaxRaiseSize="1"
MaxTransactionSize="unlimited"
PollingInterval="1"
NumberOfThreads="1"
UseBatchDestroy="false"
ReturnSingleResultSet="true"
MappingsMetaDataURL="OracleInbound_toplink_mappings.xml" />
<input/>
</operation>
</binding>
Use these properties for customise your requirement..
MaxRaiseSize="1"
MaxTransactionSize="unlimited"
PollingInterval="1"
NumberOfThreads="1"
Thanks

Similar Messages

Can i change snmp poll time in PI 2.0 and how to ?

Can i change snmp poll time in PI 2.0 and how to ?
Thanks
Keith Chan

Hi Keith ,
yes it is 5 min by default .
You would need to create a new Monitoring template for this and deploy on the
devices on which you would like to change the polling frequency.
Go to Design --> Monitor Configuration --> Metrics
Choose the type of polling template i.e. Interface health or Device Health etc
Change the values and save it as a new template and deploy.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Update dynamically Polling Frequency

Hi
Can any one help me how to update dynamically the polling frequency for the adapters(database,file) without redeploying the code again.
Thanks in Advance

No issues with my adapter the changes are reflecting only when i restart the server.
we are on SOA 10.1.3.3 with MLR#7.
My question is can we change the polling frequency value dynamically without restart of the server and without redeploying the process in to the server.
But after setting the activationAgent property also we need to restart the server to apply the changes.
Is there any alternative to update the polling frequency dynamically without restart the server and redeploy the code
Thanks

How can I change WebLogic MDB polling frequency?

I have MDB deployed to WebLogic and listening on AQ. Because of SLA, I would like the MDB to poll every 5 seconds or less no matter what. From WebLogic log I could see that the polling frequency varies depending on the load on the queue. The following shows what happens when the MDB is deployed and finds no message in the queue.
5-Feb-2014 4:11:09                    - checks when first deployed
5-Feb-2014 4:11:10        +1        - checks again after on seecond
5-Feb-2014 4:11:12        +2        - checks after two seconds
5-Feb-2014 4:11:16        +4
5-Feb-2014 4:11:24        +8
5-Feb-2014 4:11:39        +15
5-Feb-2014 4:11:54        +15
Every 15 seconds from this on. Once it fetches a message it goes back to every second, two second, four second ...
What can I do to get the desired behavior? I understand what WebLogic is doing but it does not meet the SLA requirement. This is the code for my MDB. Thanks.
public class SlowMDB implements MessageListener {
    @Resource
    private MessageDrivenContext messageContext;
    @TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED)
    public void onMessage(Message message) {
      try {
        System.out.println("SlowMDB: Message was received " + message.toString());
      } catch (JMSException e) {
          e.printStackTrace();

weblogic-ejb-jar.xml. Note that I added <use81-style-polling>true</use81-style-polling> as per Rosario's suggestion, but I get the same behavior with or without it.
<weblogic-enterprise-bean>
    <ejb-name>SlowMDB</ejb-name>
    <message-driven-descriptor>
      <pool>
        <max-beans-in-free-pool>1</max-beans-in-free-pool>
        <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
      </pool>
      <use81-style-polling>true</use81-style-polling>
    </message-driven-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
Also, if I remove TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED) from the onMessage method, then I could see that WebLogic (or AQ??) polls every two seconds and it uses a different deque stored procesdure:
Transactional:
     dequeue(ZYGT.MS_MSGREQ_INQ, oracle.jdbc.aq.AQDequeueOptions@1a019d2f, SYS.AQ$_JMS_TEXT_MESSAGE)>
Non transactional:
dbms_aqin.aq$_dequeue_in(queue_name       => ?, subscriber        => ?, msgid             => ?, correlation       => ?, dequeue_mode      => ?, navigation        => ?,
visibility        => ?, wait              => ?, enqueue_time      => ?, state             => ?, out_msgid         => ?, out_correlation   => ?, priority          => ?,
delay             => ?, expiration        => ?, attempts          => ?, exception_queue   => ?, remote_recipients => ?, sender_name       => ?, sender_addr       => ?,
sender_protocol   => ?, original_msgid    => ?, payload_type      => ?, raw_user_data     => ?, object_user_data => ?, deq_cond          => ?, signature         => ?,
out_sign          => ?, transformation    => ?, delivery_mode     => ?, out_delivery_mode => ?); end; )
with the following parameters
setString(1, MYSCHEMA.MY_QUEUE)
setString(2, null)
setNull(3, -2)
setString(4, null)
setString(26, null)
setObject(5, 3, 4)
setObject(6, 1, 4)
setObject(7, 2, 4)
setLong(8, 120)
registerOutParameter(9, 93)
registerOutParameter(10, 4)
registerOutParameter(11, -2)
registerOutParameter(12, 12)
registerOutParameter(13, 4)
registerOutParameter(14, 4)
registerOutParameter(15, 4)
registerOutParameter(16, 4)
registerOutParameter(17, 12)
registerOutParameter(18, 2003, SYS.AQ$_RECIPIENTS)
registerOutParameter(19, 12)
registerOutParameter(20, 12)
registerOutParameter(21, 4)
registerOutParameter(22, -2)
setObject(23, 1, 4)
registerOutParameter(24, -2)
registerOutParameter(25, 2002, SYS.AQ$_JMS_TEXT_MESSAGE)
setNull(27, 2002, SYS.AQ$_SIG_PROP)
registerOutParameter(28, 2002, SYS.AQ$_SIG_PROP)
setString(29, null)
setObject(30, 1, 4)
registerOutParameter(31, 4)
setLong(8, 0)

Can I use polling frequency for Database Adapter

I need to use Database Adapter that acts like FileAdapter. Can I set polling frequency for my Database Adapter, so that the adapter can query every 5 secs?

You can use polling feature when you configure your DB adapter Operation Type as "Poll for New or Changed Records in Table"
If you use Adapter configuration wizard it will promot for "Pollling Options" and Polling Frequency is the option which you can configure in seconds, mins or hrs

DB polling Frequency Configuration

Hi All,
I have a requirement to make the Database polling frequency and the number of records being picked up in that interval to be configurable. If we change the DB Adapter polling configuration every time, we have to re-deploy the code. I want to know how it can be done from the console so that it allows us to both configure the DB Adapter polling configuration as well as not to re-deploy the code every time we change the configuration based on load.
The version of SOA Suite being used is Oracle SOA Suite 11g.
Any inputs on this would be of real great help.
Thanks,
Vishwanath

Yes. Above answer works on ESB too. I mean ESB initiating with requried configs and routing to BPEL process.
In BPEL, I have seen 'Deployment Descriptor' which is meant for run-time variables. I don't think these can be used for configuring the adapter itself.
Regards,
Rev

File adapter polling frequency is not consistent in SOA 10g!

Friends,
I have used file adapter for polling files in a service in SOA 10G env. with polling frequency 3600 secs. However, i have noticed file polling is not happening at 60 mins interval, instead some times files getting polled in less than 30 mins but again after sometime its polling correctly in 60 mins interval. I am not sure what could be the reason but i need a solution urgently. Please help!

Could be the managed servers in the cluster are not in sync.
I faced DB JCA adapter sync issues because of Oracle soa suite bug.
You could check whether any sync issues are there with File adapters.

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

FTP Adapter restrict polling frequency active time frame in a day

Hi All,
Is there anyway I can restrict FTP adapter polling frequency to be active during a particular time frame of the day. Say, my service should poll the incoming location for Sales order data for every hour during business hours of the day.
Thanks,
AG

Hi
SOA Suite 12c will expose Oracle ESS as the scheduler.
ESS will allow you to schedule soa composites / OSB services etcand allow you to enable / disable them based on jobs, which is what you desire.
12c SOA Suite is expected later this Summer.
Cheers
iain

Can i keep configuration settings (polling frequency...) outside BPEL

Dear All,
Can i keep configuration settings (polling frequency and other which are typically set in BPEL adapter outside BPEL
so that at runtime BPEL will look at this configuration file instead of settings inside BPEL.
Regards
Arc

I think you can. If you define them as properties in the Adapter wsdl (by prepending a $), then you can set their values in bpel.xml. And the values in bpel.xml are exposed in the bpel console under the descriptors link. so you can modify these values at runtime, without having to undeploy the bpel process.
--Amit

Polling frequency of AQ adapter

Can we set the polling frequency for AQ adapter during Enqueue operation in 10g?
Regards
Ayush

We are facing a similar issue but a slightly different scenario. Following is the setup:
- Oracle SOA Suite 11.1.1.3.
- BPEL process (within a Composite App) using AQ Adapter reading messages from a AQ queue (corresponding to a subscription to a Business Event) in Oracle EBS.
- Huge number of messages backed up in the queue: delay of between 10 secs to 1 min between consecutive dequeue logs noticed in the BPEL process.
The 'DequeueTimeOut' parameter is explained as "It is the interval after which the dequeue() API will time out if no message is received on the inbound queue.".
But what if there a lot of messages in the queue waiting to be processed? How can we increase the polling frequency so that messages are drained immediately, or is this the default behavior?
Any response is appreciated.
Thanks,
- Hari Nadathur

Change 5622 sampling frequency

Hi,
I am working on a PXI project to generate a single tone frequency signal, (which will be modulated by vital signs) and then demodulate the signal and view the time domain demodulated signal and its spectrum. I am able to generate the signal and view the demodulated wave but the problem is I am using PXI 5663 for the receiver (and 56773 to transmit the single tone signal) and the 5622 digitizer has a very high sampling rate(150MS/s) which is too high for vital signs (whose frequency is not more than 10-12Hz).
I want to change the sampling rate of 5622 and I read a couple of sites (http://zone.ni.com/reference/en-XX/help/370592P-01/digitizers/5622_clocking/) and documents on
I am using PXI Clock as the Reference Clock Source to synchronize the 5673 and 5663 so how can I change the clock frequency of 5622?
I tried using the Decimate and Resample vi s to change the sampling frequency of the received waveform but I did not get any output.(Please find attached the vi and the front panel description of the demodulate vi;the transmission vi is the default RFSG Single Tone Generation).
I am stuck at this point and don't know how to proceed.
Could someone please help me out?
Thanks so much,
Sharmi
Attachments:
MT niRFSA Demodulate AM.vi ‏1590 KB
frontpanel.png ‏196 KB

Hi Sharmi,
Since you already have a service request open with NI Tech Support regarding this issue, I just wanted to let you know that we will be focusing our efforts on helping you out under your support ticket.
Regards,
Jason L.
Product Support Engineer
National Instruments

Schedule BPEL with polling frequency

Hi All -
I have a BPEL process which receives the file from file adapter and has polling frequency of 5 minutes.
But my process starts after 12.00 midnight. so I want to schedule the BPEL process after 11.30PM to 1.00AM and in between only it should poll.
Can it is possible? I just want to avoid polling all the 24hrs.
I am usning SOA 10.1.3.4.0. Can I use the below in this version, where I have to use te below, if it is correct?
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent"
partnerLink="FileFtpInboundPL" heartBeatInterval="10">
<property name="schedulerCallout">DefaultSchedulerCalloutImpl</property>
<property name="endpointScheduleOn">*0 6 1 ? * **</property>
<property name="endpointScheduleOff">*0 8 1 ? * **</property>
</activationAgent>
</activationAgents>
Regards,
Sreejit

Hi James,
Let me explain my process:
1. First process:
I have BPEL process which starts with recieve activity on database adapter. Database adapter has a polling on database table inserts or updates.
So whenever there are inserts and updates this BPEL process get starts. My business process say the table insert and update is going to happen in between 23:00 PM and 01:00AM. So I want to know how BPEL do polling? When I say database polling it must be looking for 24X7, and when i t gets the file it picks, so is there any way I can say the BPEL to do polling only withing the time frame.
So what ever solution we were discussed of activation agent till now in mail thread applicable on this or not?
2. Second Process.
I have asynchronus BPEL process which starts with wsdl client getting some input as payload, and I want to start this process at 23:00PM, is it possible with activation agent. The client partner link is not an adapter.
Regards,
Sreejit

Run-time Polling Frequency Control

We would like to use our bpel process in two ways:
1. Batch Update type transmissions (freq = nightly)
2. Immediate transmissions
Is there a way to control at run-time the polling frequency? Ie, is there a way to pass the value to the db adapter?
Thank you.

Hi.
For ur last point, u can take a look to the API: http://docs.oracle.com/cd/E21764_01/integration.1111/e10226/soaadmin_apimanage.htm#SOAAG97341
hope this helps
best

Best recommendation: polling frequency for imap/pop

I need some advice about the polling frequency recommendation for Applications that will use imap/pop connexion to servers. What should be the best recommendation about it?

For your best long-term interests, your best recommendation for applications is to use EWS and not these light clients. And keep in mind that these older versions of Exchange are not going to get support in the near future (in fact Exchange 2003 is
probably out of support already).
That being said, if the application is polling, it's up to them to determine how often in order for their application to be both responsive for end users and not cause extreme server issues. You can (of course) keep the latter from being an issue with
throttling.

Changing DB Polling Frequencies

Similar Messages

Maybe you are looking for