Changing Entry point programmatically

Hai,
Is it possible to change the attributes "Entry Point" of a role through codes.
We have a requirement in which during night time some of the roles attached to the user should be shown. So I thought if if change the "Entry Point" of the roles to no then the contents of the roles will not be shown. Whether this approach will work or is there anyother way to do this.
Please let me know.
Thank & Regards,
H.K.Hayath Basha.

Hi,
Check out the following blogs for assigning and unassigning roles dynamically:
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3365">Restricting usage of iViews and Pages</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4164">Dynamic portal role assignment</a>
Best regards,
Avishai Zamir

Similar Messages

Changing the icon for Entry Points

Hi Everybody,
There are some default Entry Points for Pesonal Documents, Public documents, Recently used, Favourites etc. All these Entry points are being displayed with the default icon image. I want to replace these default images with custom images but couldnt see any property where i can change the image path for these folders. I checked the details of all these folders and even went through the properties but there it shows only the default image name speciefied for that folder and no active settings where i can change the image path for custom icon. Kindly suggest how to implement custom image for KM folder icons.
Regards,
Venkatesh. K

Hi Venkatesh,
check out this SAP Help page that describes how to use a new symbol for an entry point:
http://help.sap.com/saphelp_nw2004s/helpdata/en/36/8b6b4066d9bf49e10000000a1550b0/content.htm
Hope this helps,
Robert

Change icons for entry points under Documents.

Hi all,
I am working on EP 7.0.
I want to change the images for the entry points like Public docs, Private Docs, Favorites under Documents.
I have uploaded the images under Content Admin->KM Content->root > etc > public > mimes > images > entrypoints but the images that i have uploaded are of .jpg format.
I have been through a couple of threads and found that it has to a .img format if the logo has to reflect and also the names displayed in the portal and that of the logo has to be the same.
1. Is it mandatory that the image to be in .img format?
2. If so how can I make a .jpg to .img.
I tried uploading a .jpg and changed the name of favorites but the image is not reflected.
Any help in this regard will be appreciated.
Regards,
Sandeep

Hi Sandeep,
Please see following, you might find it useful:
http://help.sap.com/saphelp_nw04/helpdata/en/36/8b6b4066d9bf49e10000000a1550b0/frameset.htm
You could try to save your images to .jpg save them as .gif and after that rename the file to .img..
Kind regards,
Ville

Programmatically selecting Test UUT as entry point from LabVIEW

Hi,
Anne here. I am currently develping a user interface in LabVIEW that call the TestStand sequence. Is there a way for me to programaticallys set the entry point to be Test UUT? I used the Run method from the IseequenceFileViewMgr class but it says there that it runs the sequence without a process model entry point. My sequence will always run as Test UUT mode. Is there a way for me to do this? I saw in the help files that there is a EntryPoint Class in Teststand with a Run Method, but I can't seem to find this method in LabVIEW.
How can I automatically execute my sequence to run in Test UUT once I call and run the sequence in LabVIEW?
Thanks for the help!
Cheers!
Anne
Solved!
Go to Solution.

Hi Roderic,
Thanks so much for the help! It worked.
Cheers!
Anne

Pass Parameter To Configuration Entry Point

In TestStand 2010 I have added a configuration entry point to select a configuration file. (Configure\Select Config File). I'm displaying a LabVIEW GUI which basically prompts the user to select a file. The file path needs to be stored in "FilePath" variable in TestStand.
Problem statement:
1. I'm trying to modularize this configuration entry point. Hence, I would write to "Parameters.FilePath" variable of configuration entry point stored in process model. This variable would be of "pass by reference" type and should eventually update the caller sequence.
However, I don't know how to pass the value from "Parameters.FilePath" to the caller sequence. I'm currently updating the station global variable directly which I think is not the correct method if I think of modularity.
2. I want the configuration entry point that was created ("Select Config File") to be enabled only when testing has not started (I'm just using single pass for my project).
Which variable in TestStand would tell me if the execution entry point "Single Pass" is called or not?

hi bce,
[ If I used a station global, how would my changes be saved? Can you do this programmatically? Is there a better way? ]
When Teststand closes, it automatically saves the StationGlobals. You would use PropertyObjectFile.SaveFileIfModified if you needed to force the save. But you shouldn't really need to do this as the latest value is available to all sequences and sequence files.
Regards
Ray Farmer
Regards
Ray Farmer

Pass data from configuration entry point

I have a need to post data from a Configuration Entry Point during a Test UUTs execution. I would like to update a parameter in my test sequence, using the configuration entrypoint if the test sequence is actively running in Test UUts. If it's not active, I would update a .ini file which gets read by the process model when a new Test UUTs entrypoint is started.
My first guess has been to determine if the TestUUTs sequence is active, and I have tried using the PropertyObject RunState.ProcessModelClient.IsExecuting, but I just realized the Configuration Entry Point is always running in the process model.
Everything I have read indicates that most Configuration Entry Points just write data to a file. Am I doing something fundamentally wrong?
How do i determine if my sequence file is being executed with TestUUts?
Thanks for your help. Woefully confused,
Brian

hi bce,
[ If I used a station global, how would my changes be saved? Can you do this programmatically? Is there a better way? ]
When Teststand closes, it automatically saves the StationGlobals. You would use PropertyObjectFile.SaveFileIfModified if you needed to force the save. But you shouldn't really need to do this as the latest value is available to all sequences and sequence files.
Regards
Ray Farmer
Regards
Ray Farmer

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Projectname.exe' does not contain a static 'Main' method suitable for an entry point .

Hi,
I'm developing a blog reader for windows 8 store app. It was perfectly worked before. But because of some miss behave my coding i get below error. No other errors there.
Error 1 Program 'c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main' method suitable for an entry point C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC
Blog_Reader
Please help me to figure this.
Thank You!

Go to your App.Xaml and R-Click Go to Properties
Check whether the Build Action is ApplicationDefinition
If not change it to ApplicationDefinition. Clean the code (solution ) and Deploy..
Chears....

Solution for Windows Store app "projectname.exe" does not contain a static 'Main' method suitable for an entry point . Error.

Hi,
I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
error. No other errors were there other than that.
Error
Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
method suitable for an entry point.
C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC Blog_Reader
But I found the solution while I fixing it.
Solution for that is like below.
Go to your App.Xaml and Right-Click thenGo to Properties
Check whether the Build Action is
ApplicationDefinition
If not change it to ApplicationDefinition.
Clean the code (solution) and Deploy
Now the error is fiexed.

Hi Robana,
Good sharing on the Technet.
This will definitely benefit other who may encounter the same issue as yours.
Thanks for your sharing again.
Kate Li
TechNet Community Support

Apple Software Update error- "Entry Point not found"

I have had Apple Software Update/ iTunes on my PC for over 4 years. Today, randomly, when I went to update iTunes to the new 10.5 version, Software Update did not prompt me to update. That was odd, but I didn't realize anything was amiss yet at this point.
In iTunes, I went Help > Check for Updates which indicated the new version was downloaded. When promted whether I'd like to update, I hit yes, which even more oddly took me to apple.com to download iTunes all over again. (Normally, updates download from within iTunes and it's an update, not a full hour-long re-download.)
I didn't want to redownload iTunes (what would happen to all of my previously downloaded apps and music, set playlists?) so I opened Software Update, and got the following error message:
SoftwareUpdate.exe - Entry Point Not Found
The procedure entry point ?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@ZOIV?@CStringT@WV?$StrT raitMFC@WV?ChTraitsCRT@W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll
Strange, right?
So my questions.
1.) Does anyone know why Apple Software Update would suddenly get errors? I've used it recently (this past weekend?) and everything was fine.
2.) Is there a way to fix Software Update, since I'll surely need it in the future.
3.) In the meantime, should I proceed with re-downloading the full version of iTunes again, and will it mess up anything I currently have in my iTunes library? Would I need to back it up or do anything to help ensure there are no further problems?
Thanks for your help. To say I'm confused is an understatement!

Well... after I posted this, some info from other posts came up and I found the answer!
In case anyone has the same issue that runs across this... this worked for me perfectly.
Correct Answer by Sposivo on Aug 19, 2011 5:23 PM
"Start, Control Panel, Add & Remove Programs, Apple Software Update, Change, Repair" - this fixed it for me.
See the answer in context

OutlookSyncClient.exe - Entry Point Not Found

I'm at wit's end with this. I've spent most of last night, and this morning trying to track this down. It all started with the iTunes 7.7 update, but it didn't happen until I started syncing Outlook with MobileMe. I get two error messages, about every 15-20 minutes. MobileMe is set to sync "automatically." At one point, I was getting and error message stating that MobileMe couldn't sync and to check my settings. The settings were right, and apparently in my troubleshooting steps I've made that error go away.
OutlookSyncClient.exe - Entry Point Not Found
The procedure entry point MAPIInitialize could not be located in dynamic link library MAPI32.DLL
It has nothing but an OK box, I hit that, and directly after I get another one with the exact same message.
The best part is, the syncing is working fine with MobileMe. These error messages are driving me nuts.
I uninstalled my Nokia's syncing software BEFORE I attempted to even setup with MobileMe (the Nokia was my pre-iPhone-phone). I've uninstalled/reinstalled iTunes. I've uninstalled/reinstalled Office 2003 and its service pack. I've completed all critical updates to Office. I'm running XP Pro SP3 with all critical updates completed. I've also manually deleted the MAPI32.DLL file and ran FIXMAPI to replace it with a good copy.
UPDATE: When I previously stated that I got rid of the MobileMe Sync error message, I apparently have not. It pops up randomly and says:
The sync failed because MobileMe is not property configured on your computer.
Make sure your settings are correct under the Sync tab in the MobileMe preferences on this computer.
They are correct. If I hit the Sync Now button, everything goes smoothly.
Any ideas before I just set fire to this thing?
Thanks in advance for any assistance.
Message was edited by: supradave

UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

Error: iTunes.exe Entry Point Not Found

I recently upgraded my iTunes to the latest version and am now receiving the following error when I try to open it:
"iTunes.exe - Entry Point Not Found
The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
and when I click ok it then gives me this error message
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
I have tried the following several times:
reinstalled/repaired iTunes
reinstalled/repaired QuickTime
reinstalled/repaired Apple Software Update
reinstalled/repaired Apple Application Support
none of which have worked. I get the error each time i try to open iTunes and then it just shuts down.
I have also tried to open iTunes in safe mode - per a recommended solution on another thread - which does not work. And I changed my control panel/quicktime/audio settings to safe mode - per a recommended solution on another thread - which does not work.
I have not added any other new software
I am on an old lenovo T61 laptop with Windows XP
Any and all suggestions would be greatly appreciated.
Thanks in advance!
Charles

This thread has a solved star:
http://discussions.apple.com/thread.jspa?messageID=3918542

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

HT1688 I have a PC computer and an I-phone 4s. I set up an i-tunes acct online w/ icloud. after a recent update my computer started receiving an error message on start up. it says "AppleSyncNotifier.exe - Entry Point Not Found". I click OK and it move

I have a PC computer and an i-phone 4S. I set up an i-tunes acct online w/ icloud. After a recent update my PC started receiving an error message on start up. It says "AppleSyncNotifier.exe - Entry Point Not Found". It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll". I click on OK and it moves on. It doesn't seem to affect my computer, but it's annoying. Any ideas on correcting this?

UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

Changing Entry point programmatically

Similar Messages

Maybe you are looking for