Changing Fonts in Master Templates

I apologize in advance, this is pretty basic stuff and I'm sure its covered in the manual but I am up against a deadline and I normally never deal with Motion or Master Templates in FCP but its a client thing
I just want to change the font of a Motion Template. I laid the template into my Timeline and did the open as copy thing which got me into Motion. I'm stumped there. There must be an easy way to change that default font. I've tried changing the font of the "Title Info" I've tried creating a whole new title but I can't seem to erase the default and get my own, or I can only change the fault of one of the titles
Any help would be greatly appreciated

In the Layers tab, select the text layer you want to change. In the HUD, change the font.

Similar Messages

  • Change Font in Master pages so that it changes the rest of the template?

    I cannot change my font in the Master pages so that it effect the rest of the template. I would have to go through each of the page and change the font. I just want the body paragraph a certain font and I don't know how to do that. I don't know if I explained my question well enough.

    Ok,
    go to page panel, and select all page that you want to apply a mater page items, mouse right click select Apply Master to Pages
    Next select the Master page to apply

  • Change font of blog templates

    Hi there
    This might be a bit of stupid question, but I simply can't figure out how I can change the font size of my blog page.
    I can change the font and size in the blog entries page, but it does not reflect on the Blog page itself.
    Thanks

    Fonts in blog main/summary page is set in the .css file, you can only change it there, see this thread:
    http://discussions.apple.com/message.jspa?messageID=3885865#3885865

  • Changing Font in SlideShow Template

    Good morning,
    In creating an iWeb page I have chosen the Black>Photos theme. After clicking on one of the photos in my album I am taken to an enlargement of said photo with buttons from 'Back to Album', 'Previous' and 'Next'. I would like to change the font and color of these buttons. Is this possible?
    Thanks for you time,
    John

    Thanks you very much for your detailed help. It seems I will have a lot to learn before I attempt any of your 3 suggestions. What is a CSS file and how might I go about learning to make one?
    CSS controls style sheets on the page: http://www.w3.org/Style/CSS/
    Photos page CSS file is in your photosPage_files folder, but as I mentioned you need to know iweb widgets also.
    By default, photos page has three widget: header controls, detail view and footer controls widgets, but depend on if and how many other widgets such as nav bar, HTML Snippets... iweb build CSS files accordingly.
    CSS and iweb widgets (javascript) are difficult to understand, because of the abstract nature. A lot reading and asking questions, W3.org is a good place to start.

  • Changing Font Colors on Master Slides

    I really like Keynote compared to Powerpoint, but I am having a problem making one change to the master theme slides. I am able to change the look, font, etc. on the master slides of a theme, but I cannot figure out how to change the font color in the master slides. Which means that when I am using Portfolio, for instance, which I like, I have to change each slide's font color from gray to black, which is easier to read. I would rather do that on the master slides, but have been unsuccessful thus far.
    Any help would be appreciated. it doesn't make sense that you could revise the masters in just about any way EXCEPT font color. So I must be missing something.

    You change the font color on the master slide, the same way you change it on any other slide. Click view, then Show Master Slides, then select the slide and change it the way you do a regular slide.

  • Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

    So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
    Thanks in advance!!!

    Hi Miro,
    I was just experiencing a similar problem today.  In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
    It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences.  I think this is what was creating the problem.
    The trim unused media box  (or whatever the check box says) was greyed out.
    My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
    Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines.  I unchecked the "rename media" option, not sure if that was necessary part of the solution.
    This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
    Hope that helps! 
    I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
    Gerry

  • I am having issues placing digital pictures in master templates in FCP 6

    Hello everyone, this is my first post but I have been using Mac's for some time now with basically no issues.
    I have two major issues:
    First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
    Anyway, after doing this I have imported this QuickTime movie into Final Cut Pro and then I cut it up and placed little clips into each drop box. This makes it so I can see the whole picture now, but it still is not as high quality as the original pictures.
    So, I have tried many times to export this master template with the pictures in the drop boxes and the finished QuickTime file looks terrible. I have not changed anything in the settings and when I export the quicktime movie I keep all the settings the same.
    What do I need to do to get this to look better? Any ideas?
    The other thing is that I have noticed a big reduction in quality from when I have the unrendered master template with the digital images in the drop boxes to when it autorenders after I have been away from the computer since I am stressing from this.
    I am trying to take these pictures of high school basketball players and use the master template to have all the players pics and names come flying on the screen before the game comes on.
    Any ideas? Why is the quality so bad? Am I doing something wrong? I have searched throughout the forums and found little information for digital images being imported into master templates, and I do not know if I am using a lossy format or something?
    Any help is extremely appreciated!

    First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
    Digital pictures are no different than any other still images, or movies, for that matter, as fas as Motion or FCP are concerned, they're just pixels.
    Your image are way too big for video. Even if you're doing high def, you're scaling them down to fit many on the screen. Thye don't need to be an larger than, say, 1k on the long side.
    You blew them up by a factor of 300% to get them out at 3240 x 2430 so now you've made all the pixels bigger than they used to be, you haven't added any pixels. Now you're biring that huge movie into FCVP and scaling it down by a factor of about 90%, wasting huge processing time and muscle and tons of disk space, totally wasted, and every scaling operation has introduced tons of artifacts.
    Throw it all ways. Batch your photos through Photoshop to change them all into 1k jpegs and start over.
    The templates are fun places to start but the mattes are (mostly) designed to crop and scale. so if you have images that are huge, they just get scaled to fit. You want to start with an image that requires the least amount of scaling.
    Welcome to the family. Video is hard.
    bogiesan

  • App. Express -- Change font size in the item label.

    I would like to size the item label so I did this and it did not work
    in the label I put <span style="font-size:12px;">ITEM 1</span> and
    <span style="font-weight:bold;">ITEM 1</span>
    What wrong?

    Hello,
    The basic “trick” here is to duplicate the proper label template (you can of course change the original label template, but that’s less advisable) in order to add an ID to the text/link part.
    In my example, the template is base on the “Optional Label with Help” template, and the “Before Label” field contains the following:
    <label for="#CURRENT_ITEM_NAME#" tabindex="999"><a class="t2OptionalwithHelp" id="L_#CURRENT_ITEM_NAME#" href="javascript:popupFieldHelp('#CURRENT_ITEM_ID#','&SESSION.')" tabindex="999">In order to maintain ID uniqueness, the new ID just adds “L_” to the item name.
    Now I have direct access to the text/link, and I can manipulate it using JavaScript. In the example, I added the following to the region footer:
    <script type="text/javascript">
    $x('L_P160_ITEM2').style.fontSize = '20px';
    $x('L_P160_ITEM3').style.fontSize = '30px';
    $x('L_P160_ITEM3').style.color = 'green';
    </script>Regards,
    Arie.
    Hi Carl,
    As usual I was busy typing and didn’t see your reply. I agree that a specific example would be the best and easiest way to help.
    Message was edited by:
    ageller1

  • How to apply a master template in a built webI report

    Hi Experts,
    I have around 60 webI reports already built in WebI (BO 4.0 with BICS conection). Now, my client wish to change the lay out in order to adapt to new visual requirements.
    I was wondering if is there any way to apply a master template and minimize the effort because for while the unique solution for this is change the xml file.
    Any ideas?
    thanks in advance, 
    Eduardo Moreno

    Hi Eduardo,
    Master template or Template is npt possible for Webi reports in BO 4.0..

  • Can DW apply a 'master' template ACROSS sites?

    Hi,
    I'm using DW8.02 to manage several sites.
    While each site does have its own 'local' template in the
    Templates directory, I want to implement the idea of a 'master'
    template that applies to ALL sites. This master template will
    contain stuff common to ALL my sites, and each individual site's
    template will be nested within this master template.
    What I'd really like to be able to do is to define this
    'master' template once only (in one of my sites) and have it update
    ALL sites (not just the one I've defined it in) when I change it. I
    can't find a way of doing this -- does anyone know how to, please?
    The problem I seem to be having is that DW seems to treat different
    sites completely separately, and that there seems to be no notion
    of considering other sites during template updates.
    (I know I could have a duplicate copy of the 'master'
    template for EACH site, but then I would have to update it in
    several places whenever there are changes!)
    Many thanks in advance, and I hope someone has an idea about
    how to do this!
    Kind regards,
    Nick

    > What I'd really like to be able to do is to define this
    'master' template
    > once
    > only (in one of my sites) and have it update ALL sites
    (not just the one
    > I've
    > defined it in) when I change it.
    You cannot.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "nheaps" <[email protected]> wrote in
    message
    news:ecvca4$19m$[email protected]..
    > Hi,
    >
    > I'm using DW8.02 to manage several sites.
    >
    > While each site does have its own 'local' template in
    the Templates
    > directory,
    > I want to implement the idea of a 'master' template that
    applies to ALL
    > sites.
    > This master template will contain stuff common to ALL my
    sites, and each
    > individual site's template will be nested within this
    master template.
    >
    > What I'd really like to be able to do is to define this
    'master' template
    > once
    > only (in one of my sites) and have it update ALL sites
    (not just the one
    > I've
    > defined it in) when I change it. I can't find a way of
    doing this -- does
    > anyone know how to, please? The problem I seem to be
    having is that DW
    > seems
    > to treat different sites completely separately, and that
    there seems to be
    > no
    > notion of considering other sites during template
    updates.
    >
    > (I know I could have a duplicate copy of the 'master'
    template for EACH
    > site,
    > but then I would have to update it in several places
    whenever there are
    > changes!)
    >
    > Many thanks in advance, and I hope someone has an idea
    about how to do
    > this!
    >
    > Kind regards,
    >
    > Nick
    >

  • Auto Page Number Change Font or Delete?

    After translation from Word to Pages, the auto page number font causes the third digit of the page number to appear outside margin of header.  How can I change font or delete and put in new page number?

    Usually the page numbering from Word are have objects that are not selectable. That is until you have made them selectable by going  Arrange > Make background object selectable. You might need to go Format > Advanced > Make Master object selectable  too.
    Delete them and use Pages version instead, Insert > Page Number

  • Retaining master template without reimporting

    Hi,
        I have a Master Report which is used as a template. Using template wizard i am assigning master template to Other reports.My requirement  is: After incorporating the Master template into other reports, i am modifying the master report. To get the change on effect again i had to re-import the reports. Is there any method to avoid that? ie, Any change in master report it should automatically take effect in other reports.
    Regards,
    Sathish

    Nothing in CR

  • Programmatically changing objects in Master Layout

    Is there any way to access and modify objects in the master template of a child report through the script?

    Hi Punkmonkey,
    I just tried it, and the VBScript doesn't even see the master layout objects.  You could probably load the master layout first, make a few changes, save it, clear the REPORT panel, then load your regular layout(s) with the checkbox set to automatically update the master layout elements.  But if you want to execute object customizations on a page-by-page basis, then it looks like those objects need to be in the regular layout.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • One Master Template for Mulitple InDesign Documents?

    For example, say I have a change to a character style, or a page template.  I want this change to be reflected in multiple documents that all have the same look.
    Right now I'm working on a template for a client that has 8 datasheets.  Each time they want a change to the look and feel of their template, I have to make it 8 times, to each InDesign file.  Is it possible to have some sort of master template?  I'm looking for the print equivalent of CSS files of the web design world.
    I thought about having all 8 datasheets on one indesign file, but it seems it would be a pain being forced to choose which page I want to export every time for pdfs, and also a hassle with page numbering.
    Is it possible to have one master template sync up for multiple InDesign documents?

    I do the same. But one thing to add:
    If these documents should have independent numbering than you should take care in the page panel's section & numbering options to restart each document with 1 (or whatever you want to start with.)

  • Changing Default & System Master Pages In SharePoint 2013

    I want to change the system master page & default master page of a SharePoint 2013 site collection. In Site Settings in the Look & Feel section Master Page is not at there. But there is Design Manager. In the design manager where can I change the
    above mentioned Master Pages.

    Hello,
    If publishing is activated you can use the page /_layouts/15/ChangeSiteMasterPage.aspx
    You can also use the Design Manager. Choose a theme and then you'll be asked for fonts, colors and...master page. 
    Hope this helps.

Maybe you are looking for