Changing From date and To date for an Event in iMovie
I have digitized old home movies [16mm and 8mm] and then imported them into iMovie. These movies are from the 1940s through 1990s. I want to change the dates of From and To, but cannot. I am able to go into the routine, but it won't let me change the From date and won't accept the To date as, e.g. 1948 [which is understandable since it would read 2009 to 1948].
Is there a way to change the From date?
Larry
The From date is the date of the first clip in the event. The To date is the date of the last clip in the event.
You can change the date of the individual clips by Right/Click/Adjust Date.
You can also set the date of a clip be renaming it in the following format:
clip-yyyy-mm-dd hh;mm;ss.ext where hh is hours in 24 hour clock format and ext is the existing extension (e.g. MOV, DV, m4v, etc.)
Similar Messages
-
I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
How to set a default start and/or end date for New Events based on trigger date.
I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}* -
IDOC BOMMAT: Wrong validity-from dates for components
Hi all,
I am currently loading BOMs via IDOC BOMMAT for a data migration project. Unfortunately I am having problems to load the BOMs with the correct validity-from date for components. The data is correct when I check in LSMW, but after the load of the IDOCs the validity-from date of each component is the same as the validity date of the BOM header!
System Version is SAP 4.7.
Thanks for your help and Best Regards
H.Has anybody any ideas?
Thanks a lot! -
Block change on dates for Approved Purchase Request
Hi expert,
I'm new to SAP Business One.
I required to block change on dates for approved Purchase Request.
What will be the best solution and how-to achieve this objective?
Thank you.Hi,
My company currently using SAP B1 version 9 PL05.
I have already applied approval procedure that it will always launch approval procedure for Purchase Request document (attached screenshots for setup approval procedure).
With above setup, Purchase Request document can only added after it has been approved (an [Approved] text has been shown on document view window and status is 'Open' as per attached below)
The dates have not disabled for editing although it has go through approval process.
The dates also not disabled for editing (Status is 'Closed' as per attached screenshot below) after it has been drawn to Purchase Order document.
Is anyone encounter this issue?
I know that SP_TN can prevent update but it is just a workaround method, not a best solution that I'm looking at. -
How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.
Hi,
Sorry, we do not support a matrix-question field. Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
Thanks,
Lucia -
Function Module/Document to change Reversal date for FI document.
Can anyone please provide me with the Function Module/Document to change Reversal date for FI document.
Hi Vikram,
Normally, you post a reversing document in the same period you posted the original document. The period of the original document must be open to post a reversing document. If the period is not open, you can overwrite the posting date field with a date in an open period, such as the current period.
Regards,
Manoj. -
I am not getting the verification email ... i changed from yahoo to a gmail for apple id...have sent it several times and I'm not receiving in gmail
Did you check your gmail account to see if it is working OK?
Are you sure you didn't make a typo when you entered the gmail address as a change? -
I accidentally changed all dates of all events, how do I correct it?
Hi,
I accidentally changed all dates of all events, now my entire library of 17000 pics is messed up. Fortunately I have the luxury of two backups: time machine and old Toad's iPhoto dB Backup. Which one should I use, to get back were I was?
Thank youIf you trust the TM version, delete the current library and then restore the TM version. Or, get an external HD or connect to another Mac to temporarily store the current version.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Lost my contacts list and try to restore from backup and it ask for my password to unlock my iphone backup. I don't remember creating a password for it. Can anyone help? Thanks.
If you encrypted the backup, there is no way around it. You will need to configure your iPhone as a new device.
From iTunes: About iOS backups:
In the iTunes Summary screen, select "Encrypt iPhone backup" if you want to encrypt the information stored on your computer when iTunes makes a backup. Encrypted backups are indicated by a padlock icon, and a password is required to restore the information to iPhone. You may want to write down the password for your backup and store it in a safe place. If you use a Mac, when you set a password you can select to store the password in the keychain. With iOS 4 and later, you can transfer the iOS keychain backup to a new device if you encrypt the backup.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device. -
Question
Just today web-sites I frequent like reddit, oregonlive and even FB started taking forever to load. I've made no changes from yesterday and today. Any thoughts? editasdfjava-er wrote:
The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
asdfjava-er wrote:
Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
"Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help. -
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
I have a lock rotation next ti my battery on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?
With Settings > General > Use Side Switch To set to 'Lock Rotation' have you then moved the switch on the right-hand side of the iPad above the volume control 'off' ?
Or with the switch set to control 'notification mute' you should be able to unlock rotation via the far left of the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't being controlled by the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
Hello, I have changed my location and credit card for my apple id. All purchased apps I had before are lost. How can I get back my purchased apps? Thanks.
If you are referring to an iDevice, sign out of your new Apple ID and sign back in with your old one - they should all be there.
-
I want to pay 4.99 for my game, however, it shows "your purchase could not be completes." I have no idea how to solve it. btw I just changed my location and payment option for my APPLE ID.
If you are getting a message to contact iTunes Support then to do so (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption
Maybe you are looking for
-
I need help in typing text along a curved path in PS CS6. I have watched and read several on-line tutorials and they all seem to say about the same thing and seem pretty simple. I create a path using the pen tool. Next I select the Type tool. I
-
I'm trying to create a podcast, but the blog summary isn't working. All that displays is the text "Blog Summary Widget". I'm using Fetch to upload my files manually to a university server, and I've checked that all files are there and permissions are
-
Problem after upgrade the Dreamweaver to version 8.02.
As you know Dreamweaver can generate a code for User Login, but I found that the code for the two versions are difference. 8.01 is like that: $LoginRS__query=sprintf("SELECT SF_id, Loginid, Loginpwd, Role, CN_id FROM tbl_staff WHERE Loginid='%s' AND
-
Problem with setting Item level permissions lists
Hello! I have SPS 2013 on-premised environment with AD authentication. At some moment I've noticed that we have a problem with setting the item level permissions on any lists except the document libraries. When I click the "shared with" button I see
-
Hi All, We are using project server 2013. We set SAR as symbol but its appear in Arabic (ر.س) in all cost fields. I heared there is some script to update the currency symbol as SAR instead in arabic. Could you please help me to update this. Thanks in