Changing off Work Provided plan...

Hello, I have a cell phone that I use for work/personal use which is part of the company's corporate cell plan. I've had this for about 3 years now. I am wondering, if I move off my work plan, and onto a personal plan, will I lose my current phone number? Thanks in advance for any comments. Have great day!

As mdram said, its basically up to your company. It sounds like they currently own your line and your number, but if they are willing to give you permission to take over the line/number you could then transfer it to your own Verizon account.

Similar Messages

I just changed my Internet provider and my Apple TV is not working. It is showing a blank screen - tv is on the correct setting...cannot even see access any Apple TV screens to update my internet?? Help?

I have just changed mt internet provider and cannot get my apple tv to work now!

Welcome to the Apple Community.
Changing your ISP may cause some issues but not so far as I am aware a problem with it connecting to your TV.
Have you changed anything else, what troubleshooting steps have you taken so far.

How does changing an internet provider affect the wireless network

If I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?

It affects your network setting, I changed the provider, now is AT&T, they "don't support 3rd party routers".
I followed their instructions to change their modem settings to "bridge", the router still doesn't work, have turned off modem and router, still doesn't work.
Had to return to the other modem since I have not disconnected it yet.
Already checked that the IP address of the computer and new modem are similar as recommeded by AT& T, still can't make things work.Frustrating !!

I've recently changed my network provider. iTunes recognized the new number and amended it in iTunes. My original number is now available but iTunes won't accept it or allow me to change the number on the device. How can I resolve this?

Hi Guys
I have just changed my telophone provider in the UK from )2. To transfer the number, which I wanted to retain, took 24 hours and I was given a new number by the new provider Virgin Mobile. To unblock my iPhone I had to connect it to iTunes, which recognised my device and changed the telephone number. 24 hours later, my old number returned but iTunes won't recognise the device or allow me to change the number back to the original. How do I reslove this?
Many thanks ;-)

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

Is Verizon trimming $10 off most data plans -- or not?

Read today 2/4 that Verizon is trimming $10 off most data plans--but no sign of it on My Verizon.

The changes aren't effective until tomorrow (Feb. 5):
Some Changes coming to More Everthing.!

No data on BlackBerry 10 even with a working data plan

Hi,
Q10, unlocked, 10.1.0.4181, Estonian SIM card with a working data plan, correctly set APN, a bunch of restarts, etc - still no data connectivity. With WiFi on, data works, BBM works, everything except for the App World (which is n/a here) works.
Now. Where is the problem, and how do we solve it? I'm not going to be very keep on accepting answers like "lol you've just spent 650 EUR on a phone and a 10EUR/mo data plan with a 12 months contract which you can throw out of the window."
Thank you kindly for your answers and suggestions.

So, have you specifically asked your carrier about any of this, or are you operating purely on assumption? You see, it's entirely possible that your carrier has erroneously mis-provisioned something about your plan, and that's what is causing you to not have any services. It's also possible that you simply cannot have the services you desire on this carrier. But, as has been from the start here, only your carrier can answer these questions, for we have no visibility into anything beyond the words you provide us here -- and so far, all of those words indicate that you must have a discussion with your carrier, but for some reason you are refusing to do so...I really don't understand why you are so reluctant...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mass change of work center in production order

Dear All,
Is it possible to mass change work center in production order, i.e. i have around 100 production order of which i have to change the work ceter assigned in particular operation .
Thanks and regards
Manish

Hi Manish,
If you have not posted any activity or goods to the production order, then in header click on Functions -> Read PP Master Data.
The order will now read the routing with the new work centers, provided the same has been changed.
If you have posted some activities or goods movement done, then its a manual process.
Hope the above answers your query.
Regards,
Vivek
Added
If in case you have posted some goods or confirmed some activity, check if you can reverse the same, re-read the routing & then post back the goods.
Edited by: Vivek on Feb 24, 2009 12:22 PM

Work provided, pre-configured, Linksys router

Couldn't figure out how to get the mac to work with my secure wifi network so we just opened it up. 9 months later, work provided me a mandatory router to use with my intel work laptop. Not real interested in using 2 routers at the house.
Here's the config that work provided on this router:
Configuration and profile contain the following:
Time Zone changed to “Central”
Router address changed to 192.168.10.1
Router password changed to h3lpd3sk
SSID name changed to LS54gJFG
SSID broadcasting: Disabled
WEP 128bit Encryption Enabled, Key 1: 661799CE0CD0CA8F8FAC40CD48
Passphrase SPEK4LS54gJFG
How do I configure this on the Mac. I tried the wizard and tried dumping the web and the passphrase into different fields but the DANG thing will not connect to the network. There are instructions for employee's to connect intel personal computers to this wifi device so it's not an issue of only allowing corp PC's to the router, but rather just need to know how to do this w/ a mac.

In as much as the SSID Broadcast has been disabled you will need to select "Other" in the drop down Airport status in the menu. Then type in " LS54gJFG". Then you will need to put in the password "661799CE0CD0CA8F8FAC40CD48". Sometimes a $ sign in front of the password may be required to get in. Your other option is to reconfigure the router. In a browser type in the router's address. You have the router password. Then open it up to what you want. Your other option is to reset the router to factory default by pressing in and holding the reset button.

Unauthorized Change to TV Service Plans

There have been unauthorized changes to my TV service plans twice in the last billing cycles and I'm clearly agitated. The facts:a. On June 19th, I received a Verion email notification stating that my TV plan was changed from Prime to Extreme HD. I know none from our household initiated this change. I called a Verizon rep and wanted an explanation and resolution of this issue. Verizon was able to prove on their part that no call was made that authorized any changes. BUT, Verizon intimated that the change might have been done remotely. I asked them to prove to me how that was possible since none from my household how this is even done. Verizon promised to change back my plan to Prime. My issue with this sequence of events is that Verizon is throwing the burden to the customers to provide proof that the change was not initiated by the latter. b. On July 16th, I received an email bill notifying me that my bill increased by almost $70 from $321 to $385 because of a change in TV service plan from Prime to Extreme HD (again!!!). It is now apparent that Verizon never change back my plan to Prime. I called Verizon rep (Jane) and complained about this incident. I asked them to retroact the changes as I do not (and will not) give Verizon the satisfaction of benefiting from their own mistake and inadequacy. They kept on implying that maybe somebody did the change remotely. How can I prove a negative. When someone buys from Apple Store or Apple iTunes, one needs to put in their password everytime. There is no such thing with Verizon with respect to change in TV service plans according to them. Yes, with respect to buying movies on Fios, one needs to authenticate. But it seems, Verizon, through, utter corporate or institutional laziness, did not care to put the same authentication process and is asking the customers to prove otherwise. I can firmly say that none from my housefhold made any changes remotely, online to our TV service plans. Something is wrong with the Verizon system. But Verizon is totally screwing its customers by not correcting their system or by denying that such a problem exists. If Verizon wants to do right by its customers, then an easy fix can be made by requiring authentication for any change in rate or package plans done remotely or online. Bottom line: No one verbally or remotely authorized a change in my TV plans from Prime HD to Extreme HD. None. The Verizon rep (Jane) who I spoke to promise to escalate and stated that they will correct my current bill. My trust with Verizon is broken. I have wasted three hours resolving the issued outlined in a and b above. My blood pressure is up and am clearly agitated at this point. I need someone Verizon to step up and resolve this situation not only on my behalf but all other customers who might be encountering the same problems as I have. Please help.

You are talking to peers not Verizon. Call them or chat. 1-800-Verizon or use chat which is one of the options on the contact us options on every page http://www.verizon.com/support/residential/contact-us/index.htm .

Change component quantity in planned order

Hi,
Is there any FM or BAPI for changing component quantity in planned order?
Regards,
Archna
Edited by: Archna Raja on Sep 22, 2010 12:17 PM

Hi Srinivas,
I assume, you try to change Manfacturing Order ( Like Process Order, Planned Order etc). If so, the mentioned bapis will work perfectly. However, you have to send right data to bapi BAPI_MOSRVAPS_SAVEMULTI3. Send to bapi,only what is needed, because if there is any mis-match,system will not update the order.
Few insights from my side are,
1) Check "ORDER_TYPE" Input Parameter.
- 5 Planned Order
- 6 Production Order
2) Fill Only ORDID, ORDER_NUMBER and MASTER_ORDER_QUANTITY in the structure ORDER_HEAD.
3) Also, fill the same in the structure ORDER_HEAD_X. Put 'X' only for MASTER_ORDER_QUANTITY.
Hope this will help you.
Thank you,
Santosh KB.

I recently changed my internet provider and now I can't access any files on my time capsule.

I recently changed my internet provider from Bell to Rogers and now I can't access my files on my Time Capsule.
When I click on Finder, it shows up as a Shared Drive. Unfortunately, when I select it, the folder shows up blank. I know the "Data" folder I'd created is there since Time Capsule is able to backup to it and iTunes is still downloading my music to that folder. How do I fix this?
The wireless network works too since all my devices are able to connect to it.
Help, please!

NVM: Found out all I had to do was reboot my Macbook Pro.

HT6084 Since upgrading to OS X Mavericks I have not been able to work on any MS Word tracked changes documents (works fine if no tracked changes), as every time upon opening such a word file the word processor closes / crashes. What can be done in this ca

Since upgrading to OS X Mavericks I have not been able to work on any MS Word tracked changes documents (works fine if no tracked changes or comments in the doc). Every time upon opening such a word file with tr.changes the word processor closes / crashes.
What can be done in this case?

I just discovered that by turning off in tracked changes balloons in Word preferences prevents the software from crashing, but from then on I need to use only the review pane.

I want to cancel my subscription and change to the photographer plan, how do I do this? I tried to call you but it is impossible, chat is impossible as well . If I would not obtain answer for you, I will have no choice to cancell my suscription

I want to cancel my subscription and change to the photographer plan, how do I do this?
I tried to call you but it is impossible, chat is impossible as well . If I would not obtain answer for you, I will have no choice to cancell my suscription.
Thanks in advance

You need to cancel the present CC (in case of repurchase the cancellation fee can be waived off) & repurchase the plan that you want.
Please let me know if you would like to go for cancellation of the present CC via personal messaging.
Regards
Rajshree

I use trial version CC 2014 rite now.. but i found that some of my brushes didnt support..can i change my trial version plan to trial CC? (not CC 2014)

i use trial version CC 2014 rite now.. but i found that some of my brushes didnt support..can i change my trial version plan to trial CC? (not CC 2014)

Hi scarabs55,
Are you working with Acrobat or Photosohp? (You mention both PDF files and photos, so it's not clear.)
Let us know what software you're thinking about upgrading and we can point you in the right direction.
Best,
Sara

CWS with multiple domain users sharing a computer off work

Hi,
I need to know if this is an expected behaviour and if there is a workaround to this. I have AnyConnect Web Security (3.1.04063) installed on Windows 7 Enterprise computer that is part of a Windows domain. Two domain users login to the computer at work. When User1 logs in and visits "whoami.scansafe.net", his relevant user/group info is displayed in the browser. When User1 logs off and User2 logs in, the page correctly displays info for User2 in the browser.
However, if at this point the computer is then taken off the work network say a home/public network where AD domain servers are not available. Both User1 and User2 can still logon to Windows but for both of them the "whoami.scansafe.net" page display the info for User2 only. It doesn't change even if the computer is restarted and User1 logs in - still User2 scansafe info is displayed. This happens to User1 untill the PC is brough up on Work network where Windows Logon service is available and User1 can now correctly see his scansafe info in the browser.
Shouldn't Web Security client app be pulling the info relevant to the logged on user for both on and off work networks ? If this is expected, is there a docu reference to this ?
Thanks,
Rick.

Hi Rick,
That is the expected behaviour of AnyConnect Web Security (ACWS).
Reason is when you are off the network, ACWS will use the cached credential of the user who last login. In your example, if user2 is the last to login when he/she is connected to the work network, then his/her user credential will be cached.
It uses the information from the output of gpresult/r.
Regards, Jen

Changing off Work Provided plan...

Similar Messages

Maybe you are looking for