Changing Picklist for Activity Status

Does anybody has an idea, how to change the values of the Activity Status Picklist? We would need just "open" and "closed".
thx, martin

Thanks Bob, I already assumed this.
I thought about using a second picklist and updating the standard status with a workflow. But this would require a default value in the standard status field.
The second problem is, that we are using Email Integration which I think is only updating the standard status. To solve this we need to have a default value in our second picklist of "closed".

Similar Messages

  • Massupdate for Activity Status

    Hi all,
    Do somebody know how I can massupdate the status of activities in CRM 4.0?
    We need to change the status of approx. 2000 activities and search for a possibility to do that with a massupdate trx like in SAP R3.
    Thanks for help.

    Hi Volker,
    You may use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' to update all the activities as per your requirement.
    You can update status detail in parameter : STATUS
    Setting of the user and system status of an activity. With this parameter, you can influence the user and system status of an activity. To do this, the following alternatives are available:
    1. Direct setting of the user status
    Fill the field STATUS with the key of the user status, and the field USER_STAT_PROC with the status profile. The dependent system status are determined automatically.
    2. Setting of the status by means of a process
    Fill the field PROCESS and, via the field ACTIVATE, control whether the status should be set or undone. The user and system status are determined automatically.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • E Recruitment : Report/Query for Activity Status

    Hi,
    Is there a standard report/query which shows all the activities with their corresponding status and due dates.
    If not, can someone guide me how to capture this data, in terms of tables which store this details.
    Any inputs on this please....
    Thanks
    MM
    Edited by: abaphr_mm on Oct 29, 2010 6:56 PM

    Hi,
    could you give some additional information on your requirement?
    If you need support for the every day work of the recruiter there are standard bsp applications (up to ehp 3) and work sets (for ehp 4 sp 4 and higher) which show the planned activities and planned correspondences for them.
    If you need some statistic over all recruiters the are some infosets but I never used them as they never met the requirements in my projects. I'd probably write some report reading the activity infotypes (tables HRP5135 to HRP5142/43 or 45 depending on your e-rec release) directly. For statistics please keep in mind that recruiters tend to not complting all of their activities. So you might gather tons of data from candidacies / applications which belong to requisitions which are already closed.
    Best regards
    Roman

  • Change log for system status of Building

    Dear Experts,
    Would like to inquire if there is a tcode that can be used to view logs for change in system status of building in RE-SD
    Thanks in advance.
    Kathy

    Hi Kathy,
                 when ever there is error we check using
    -> BPIA
    -> ECATT error log or BC set error log
    -> SECATT tcode can be use dfor the purpose
    With every Package there is a installation guide which has further information for the things about the package being used.
    Have a best day ahead.

  • Cannot change shortcut for activating app expose

    Hello,
    I can't seem to reassign the shortcut key for "Application windows" in exposé. I can change the key in the Exposé preference panel, which has a limited set of keys. But I cannot change it to an arbitrary shortcut (e.g. opt-s) in the keyboard preferences. Could somebody help?
    tbontb12345

    no, not a lot... and no, I don't download any music or videos... maybe I should just delete all the re download,. what I'm afraid of is that even if I delete all the apps it will anyway keep the same problem, because when I go to "My Apple ID" and click it keeps showing me the other email.... and then I will not be able to use any Aps on my iphone....
    anyway, thank you so much for all the help.... and I DID sync with iTunes, but it didn't help, only made it worse.... maybe I will hang myself.... (just joking) going to sleep now and will try out in the morning./// thanks again!!!

  • Change Documents in HU status management

    I've been trying to activate change documents on HU status management (object type HUM). The user status profile that I set up works fine (except of course for the logging of the user status changes).  Now, I suppose there must be a pretty standard (and maybe even straight-forward) way to activate the change documents for this object, but I simply don't see it. For this object, I get no entries in the JSTO/JEST tables, but in the HUSTOBJ/HUSSTAT.  I however can not get to the point that the flag in field HUSTOBJ-CHGKZ is activated via standard customizing.
    On the pop-up screen when selecting the HU status info, there's a check-box foreseen (however greyed-out) for the change documents, so, I guess the functionality is fully supported.
    Can anyone guide me in the right direction?

    Dear Patrick,
    in the SAP-standard it is only possible to check the change documents
    for the HU (in transaction HUMO, in the menu: Goto -> Chnge docs), but
    there are no change documents for the status changes.
    The reason the field is greyed out is that this functionality has not
    been developed. It is a missing functionality. It would be only possible
    via a modification to activate change documents for status changes of
    the HU.
    Regards,
    Ely

  • How can I have "active" status on a PnP network?

    I use DC++ to connect to a peer-to-peer network.  Using the FIOS router, I have been relegated to "passive" status on the network, which limits the number of contacts I can make.  Is there a way to configure the router for active status?  TIA whh
    Solved!
    Go to Solution.

    whh wrote:
    I use DC++ to connect to a peer-to-peer network.  Using the FIOS router, I have been relegated to "passive" status on the network, which limits the number of contacts I can make.  Is there a way to configure the router for active status?  TIA whh
    The number of contacts is limited by the number of connections that you can have through the Network Address Translation Table. NAT for short. I am assuming you mean peer to peer and not Plug N Play PnP. There have been many router complaints regarding the NAT table being to small. Use the search feature at the top of the forums page and search for NAT. Other option is use your own router that is not supported by Verizon. Your ONT would need to be setup for Ethernet and if you have TV the Actiontec would need to be connected to your router. Remember custom router configurations are not supported by Verizon residential FIOS. There have been loads of postings about how to use your own router.

  • BAPI for changing activity status in CIC0

    Hi
    We are developing a custom application on Netweaver platform which interacts with CRM system.
    As one of the requirements we need to <b>change the activity status from open to closed</b> in the transaction <b>"CIC0"</b>. 
    I am looking for some BAPI which can do this task for me. Can anyone help me on this issue?
    Thanks
    Yashodhan

    Hi Amit,
    Thanks for the reply. I was trying to change the status flag from open to close using the said function module.I had gone through the documentation of this module and trying to use this with parameter "Status". The approach I am following is as follows:
    1. Assiging the sequence as
              a. BAPI_ACTIVITYCRM_CHANGEMULTI
              b. BAPI_ACTIVITYCRM_SAVE
              c. BAPI_TRANSACTION_COMMIT
    As an input to Parameter in case of BAPI_ACTIVITYCRM_CHANGEMULTI  I am sending following:
    REF_GUID-> GUID of the transaction Activity.
    STATUS-> Status Key like E0003 for closed status
    USER_STAT_PROC-> Status Profile for my Business Transaction type ( Which is defined in transaction "BS02")
    As an input to "Obejcts_To_Save" in BAPI_ACTIVITYCRM_SAVE I am again sending the GUID of transaction activity.
    Now when I am executing all the above in sequence I am gettin error by BAPI_ACTIVITYCRM_SAVE  saying "Doucment could not be saved"
    I am not able to figure out what is the problem?
    Please help!!
    Thanks
    Yashodhan

  • Change pointer for functional location- deletion flag & activation status

    Hello,
    Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
    I found that those two are stored in:
    table     field
    TAPL     LOEKZ
    TAPL     PARKZ
    The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
    Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
    For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
    Thanks in advance.

    Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
    rgds.

  • Mass change Tcode for  status of multiple projects

    Dear All,
    Any SAP Standard t code for mass Status change for multiple Projects
    (like TECO,AALK).
    Thanks.
    Arun

    Hi
    You dont have this option in any STD SAP t.codes, where you can change the status of the projects/WBSE collectively.
    So use this BAPI to Read  the status of Project/WBSE
    BAPI_BUS2001_GET_STATUS   To get both the active system statuses and the user statuses for a project definition
    use this BAPI to Change  the status of Project/WBSE
    BAPI_BUS2001_SET_STATUS
    one system status and one user status  can be revoked each time, and one system status  and one user status  can be set each time for a project definition 
    For Network order status change
    BAPI_BUS2002_SET_STATUS
    Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
    Thanks
    S.Murali
    Edited by: S. Murali on Jul 24, 2009 3:43 PM

  • Activity status , and partner changed by FM CRM_ORDER_MAINTAIN

    Hi any one used FM CRM_ORDER_MAINTAIN to change the Activity status and the BP assign to the activity. If yes please help me.
    Import parameters:
            it_partner 
            it_status
    CHANGING
            ct_orderadm_i
            ct_input_fields

    Hello Sachin,
    Search for the thread "CRM_ORDER_MAINTAIN - Appointments" on SDN. This talks of your problem and should give u the exact solution.
    https://forums.sdn.sap.com/post!reply.jspa?threadID=47889
    Reward points if it helps !!
    Rgds
    Priyanka Bansal

  • I need to change my iCloud email address.  I changed it for my Apple id but I can't log out of iCloud to change it there.  Find my iPad is activated so I can't delete my iCloud account.  I don't have the email address the iCloud login has anymore.

    I need to change my iCloud email address.  I changed it for my Apple id but I can't log out of iCloud to change it there.  Find my iPad is activated so I can't delete my iCloud account.  I don't have the email address the iCloud login has anymore so I can't have the password sent there.  To sum it up, iCloud has an old email for the account log-in.  I don't remember the password for the old email.  I have Find My iPad activated so the iCloud account cannot be deleted.  And I am already logged out of iTunes & App Store. 

    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • EXIT/ BADI/ Enhancement point for User Status change in Order

    Hi all,
    I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
    I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
    I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
    Thanks and Regards,
    Sonal

    Hi,
    Use this Enhancement IWO10009 and call these function module to change the User Status
    STATUS_TEXT_EDIT --> To Read the existing status.
    STATUS_CHANGE_INTERN_VB --> to change the status.
    Regards,
    Satish

  • What is the impact - Activating Change Logs for Material Classification Dta

    To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
    Thankyou
    Kevin

    In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

  • Error in activating status profile for SVT

    Hi,
    I've been trying to activate status profile EHS_SO for SVT in REACH compliance version 2.0 . But I am stuck.
    When I save a sales order, a message-'Error when activating status 0001 for status profile EHS_SO in order XXXXXX' has come up. My IMG settings are as follows:
    Sales documentr: No existing status profile used
    Status profile: EHS_SO added with status SD
    Environment parameter:SVT_SO_PROFILE: EHS_SO
                                          SVT_SO_STATUS: 0001 used
    Activate Status profile: STUCK (can't figure out the object type for VBP object type category)
    Does anyone know?

    Hello Bomi,
    Please see SAP note # 1111196. It talks about Status profile for sales order and status profile for production orders for online check for SVT.
    May be useful to you.
    Regards,
    Niraj

Maybe you are looking for