Changing scene when comboBox changed

Hi,
I'm a complete newbie to Flash and programming, so please forgive my lack of knowledge! I have been trying for a good couple of hours now to do what I'd think would be a simple task - change scene when the value in a comboBox is changed.
This is the code I have:
stop();
dropdown.addEventListener(Event.CHANGE, changemade);
function changemade(event:Event):void {
gotoAndPlay("main", 1);
However I get the following error:
"1067: Implicit coercion of a value of type int to an unrelated type String"
I'm stumped, and Google isn't much help as code examples seem identical to what I've done. Can anyone point me in the right direction? Any help is greatly appreciated!

If you have AS2 experience, the order of the arguments in gotoAndPlay switches when you move to AS3...
gotoAndPlay(1, "main");

Similar Messages

How to notify (email) Change Manager when new Change Request is created

Hi there, I am battling to generate an email when a developer creates a Change Request directly in the SolMan system. When he creates a new Change Request via CRMD_ORDER by filling in the Sold-to-Party, Change Manager, iBase etc., the message is automatically in 'To Be Approved'. I want to notify the Change Man ager as soon as a new Change Request has been submitted, but when I check the Actions tab in the message, no email action is listed or executed. I have edited SLFN0001_STANDARD... in SPPFCADM with conditions set. How can I create a email notification for the Change Manager as soon as a Change Request is in To Be Approved status?
Message was edited by:
Bernardt Nel

Hi,
Create a action definition with the following information:
Processing when saving.
No restriction.
Check Schedule Automatically.
Check Partner-Dependent.
Select Partner Function for Change Manager.
Determination Using Conditions that Can be Transported.
Then you have to create an Start Condition such as; userstatus = to be approved.
No scheduled condition is needed.

RSPC changes even when SCC4 changes not allowed

Hello,
This is about accessing t-code RSPC; we want to be allowed to change Process Chains' configs. We used to have any troubles when changes in client were allowed, but after client was "closed" it started to fail. Below the details:
SCC4: Client is currently set as:
Changes and Transports for Client-Specific Objects -> No changes allowed
Cross-Client Object Changes -> No changes to Repository and cross-client Customizing objs
Protection: Client COpier and Comparison Tool -> Protection level 0: No restriction
CATT and eCATT Restrictions -> eCATT and CATT allowed
BW Workbench-Transport connection/Object changeability:
RSPC, Process Chain -> Changeable Original
RSPT, Process Chain Starter -> Changeable Original
RSPV, Process Variants -> Changeable Original
The assigned role owns (which as per my knowledge is ok):
OBJECT    FIELD        LOW
S_RS_PC   RSPCPART     RUNTIME
S_RS_PC   RSPCPART     PROTOCOLS
S_RS_PC   RSPCPART     DEFINITION
S_RS_PC   RSPCCHAIN    Z*
S_RS_PC   RSPCAPPLNM   Z*
S_RS_PC   ACTVT        23
S_RS_PC   ACTVT        16
S_RS_PC   ACTVT        3
However, after accessing RSPC and opening process chain view mode, when trying to change to "change" mode popup window is raised stating:
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
therefore any change can be made.
Could you please advice? Am I missing something? I hope you can help. Thanks a lot in advance. Best regards,
Bernardo

Hi Bernardo,
in Transport Connection > Object Changeability there is a third option " Everything Changeable" you have to select that option for RSPC related objects.
Right click on any object type you want to change and chose "Everything changeable"
this should solve your issue.
cheers
#PV

No changes made when I change & publish?

I make changes to multiple pages in Dreamweaver CS3. I then
do a precheck within Dreamweaver (IE & Firefox). Both look good
but when I check my site out no changes have been made. I clear my
cache & refresh,,,same thing? I even go in and delete the html
pages and reload but no changes.
What am I doing wrong?

> Hard to fix something that looks good inside my
Dreamweaver.
Not at all. Do you ever look at your code? That's where the
answers are.
Can you post a link to one of these pages? I'm betting that
your site is
not properly defined and that your links are pointing to
files on your hard
drive.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ss-1" <[email protected]> wrote in message
news:galoa6$egd$[email protected]..
> Yes, so I know the page is gone. I then upload the page
I made changes to
> but
> it doesn't look like it does in Dreamweaver. Links are
broken etc.
> Dreamweaver has the preview in IE & Firefox that I
use to check everything
> out.
> Hard to fix something that looks good inside my
Dreamweaver.
>
> Help!
>

Transaction Iview change name when language change

Hi,
I have created transaction Iview, how to change the iview name (in portal content) lnanguage when the portal language be changed
Thanks

Hi,
You can achieve this using Portal Content Translation. Follow the below steps for translation.
1) Goto Content Administration > Portal Content Translation > goto your folder > Click on new > select translation worklist
2) Now provide name of the worklist, ID, Prefix & language.
3) after creating translation worklist, open it by double clicking on it.
4) Right click on the iview you want to add > click on Add object to translation worklist
5) Now Click on u201CGenerate Translation Datau201D
6) Next click on Release for Translation button
7) Now goto u201CWorklist Translationu201D (in detailed navigation)
8) Type * and search
9) Select the translation worklist which was created earlier.
10) Select the source language as english (If your master language is en - you can find master language of role in role properties). Target language as language you want to change.
11) Click on u201Cload for translationu201D
12) select the iview from the list you want to translate
13) type the equivalent name of the iview manually in the Target Text.
14) Click on Save All.
15) Now Click on Mark as translated.
16) goto Translation worklist coordination > goto the translation package created in the folder (open that) > click on Publish Translation
Now you can switch to language through personalization and can check the changes.
Check this link also: [https://wiki.sdn.sap.com/wiki/display/EP/PortalContentTranslation]

How do i set up controls to not change value when patches change?

Just bought mainstage and want to set up the following - piano or rhodes with mutes/volume available all the time, both with editable controls, PLUS hammond and pads available all the time too with mutes/volumes but using mainstage patches to select different hammond/pad configurations so that i can 'one' touch a new hammond sound WITHOUT changing my piano sounds, that have been tweeked live. I had hoped that 'keep' in the patch change preferences would preserve my piano changes, but no they reset with every patch change. All my sounds are AU's (ivory for piano, vb3 for hammond, sampletank for pads, and mr ray for rhodes (but seems to crash too much so may have to use evb88:-(. Any help would be gratefully received.

Hi
Which version of Mainstage are you running?
CCT

Can the release is reset in PO when the change is not about value?

Dear gurus,
I have one requirement that when PO is released, the buyer would still be able to change it. Any changes that he made (for example the material PO text) then it should reset the release strategy.
In the config i already put the changeability to 6, and then put 0 in value change, but when I change the PO the status is not reset to blocked.
Please help.
Best regards,
John.

Please see (the second part of) my comment in
Re: release strategy is not reset in PO?
Reproduced here for your ease:
You can use the release user exit. If the PO is in change mode and Save option is selected, then increase the value in the user exit (This does not increase the PO value actually, just fools the release strategy into thinking that the value has increased).
Lakshman

Can I make my default printer change when I change location

How do you make automatically change printers when you change network locations? If it is possible I sure don't see how. Seems like I could do this in OS9 but I didn't need it then.

I haven't tried it, but I've seen it advertised:
http://homepage.mac.com/locationmanager/
(if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the gold or green star above in order to mark this reply as "helpful" or "solved")

Need to trigger change pointers for a change in std text

I need to trigger an idoc via change pointers when any change in a std text occurs. I am doing this for changes in Customer Master. For example, if the std text obtained via tcode XD02 is changed, then I need to trigger an idoc. Is this possible? What is the object class used?
Thanks,
Keerthi

Hi,
All Standard text views are stored in V_E071.
Use the View for V_E071 for checking standard text transport
Give Object Filed Name = TEXT and check
And search the standard object
Go to se09 create workbench request and
Double Click the request and go to program give R3TR and Object: TEXT and object Name: TEXT, Nike_FT_AB_4700, ZEPC, D
Object: TEXT
Where Nike_FT_AB_4700 is Customized Name of Standard Text
Text Id: ZEPC (Default: ST)
Language: D (DE)
Go to SE03 double click the Search for Objects in Requests/Tasks in the
R3TR Object ; TEXT and do search.. with respective to that you will get change request.
Do rewards points.

Some questions about how to change scenes

i have something like the following:
fxml (view/main/MainMenu.fxml):
<Scene fx:controller="view.main.CtrlMainMenu" xmlns:fx="http://javafx.com/fxml" stylesheets="view/main/main.css">
    <GridPane xmlns:fx="http://javafx.com/fxml" alignment="center" id="backgorund" hgap="10" vgap="10">
        
        <VBox spacing="8" GridPane.columnIndex="0" GridPane.rowIndex="1">
            <Button text="Start" onAction="#Start"/>
            <Button text="Options" onAction="#Options"/>
            <Button text="Exit" onAction="#Exit"/>
        </VBox>
    </GridPane>
</Scene>main loop (cotroller/main.java):
public class main extends Application{
    public static void main(String[] args){
        launch(main.class, args);
    public void start(Stage stage) throws Exception{
        stage.setTitle(CtrlLanguage.get(CtrlLanguage.TITLE));
        CtrlMainMenu main = new CtrlMainMenu();
        Scene scene = main.main();          //don't know how to make Scene scene = (Scene)FXMLLoader.load(getClass().getResource("MainMenu.fxml")); work on here since MainMenu.fxml is in view/main while the main class is in controller and ended up putting CtrlMainMenu in the view although is not very correct
        stage.setScene(scene);
        stage.setWidth(1080);
        stage.setHeight(720);
        stage.show();
}view controller (view/main/CtrlMainMenu.java):
public class CtrlMainMenu{
    //other buttons actions
    public Scene main() throws Exception{
        return (Scene)FXMLLoader.load(getClass().getResource("MainMenu.fxml"));
    @FXML protected void Start(ActionEvent event){
    @FXML protected void Options(ActionEvent event){
    @FXML protected void Exit(ActionEvent event){
        System.exit(0);          //is there any other way to finish the program than using a system.exit?
}got few questions currently:
1. i'd like to be able to keep using CtrlMainMenu for other buttons while the ones that appear there go to the main (since will be reusing those classes from other scenes)
tried adding fx:controller on panes instead of the scene, but it doesnt work at all (it crashes) else directly in CtrlMainMenu change the scenes of the stage, but then, i have to send the stage to every controller i use? (or how do i know the stage of the scene?)
and in the case of options, i'd like after done, go back to the previous scene, is that possible? if so, how?
2.if i want to implement languages, how do i do to change the text? tried with setText() but depending on where do i put it, it crashes, so dont know where do i have to put it
3.im doing a game that may have different number of players, so, is there some way to erase/hide/add data from a gridpane with fxml?

1. ok, found the way to change scenes, with this way:
@FXML protected void Start(ActionEvent event) throws Exception{
     Node node = (Node)event.getSource();
     Stage stage = (Stage)node.getScene().getWindow();
     Scene scene = (Scene)FXMLLoader.load(getClass().getResource("../view/main/MainMenu.fxml"));     //this is just an example, will change to go to another scene
     stage.setScene(scene);
     stage.show();
}but now i have another problem, when i click on the button the stage scene is changed, but the scene is transformed to a very small one at the top left (the size seems the same as when i dont put the set width/height on the stage when creating it), the stage size remains the same, and when i resize the window, it gets "repaired"
the options, i thought on using a pane over the current pane so this way instead of going back would be just removing that new pane, would that work well?
2. found about languages that is by using <Label text="%myText"/> and java.util.ResourceBundle but don't know how to use it, can someone provide me an example, please?
3. still haven't looked on it...

How to cancel ComboBox change?

Let's analyze the following scenario. Window contains a combo box. When user changes the value, under some circumstances, it may cause data loss, so program asks user, whether he really want to change this value. If he answers "No", value in the
combo box should remain unchanged.
Here's XAML part of the PoC:
<Window x:Class="BindingProblem.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525">
<Grid>
<ComboBox ItemsSource="{Binding ItemsSource}" SelectedItem="{Binding SelectedItem, Mode=TwoWay}" HorizontalAlignment="Center" VerticalAlignment="Center" />
</Grid>
</Window>
And there's code-behind part (for simplicity, windows is its own DataContext):
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
namespace BindingProblem
/// <summary>
/// Interaction logic for MainWindow.xaml
/// </summary>
public partial class MainWindow : Window, INotifyPropertyChanged
private int selectedItem;
private void SetSelectedItem(int value)
if (MessageBox.Show("Are you sure?", "Test", MessageBoxButton.YesNo) == MessageBoxResult.Yes)
selectedItem = value;
if (PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs("SelectedItem"));
else
if (PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs("SelectedItem"));
return;
public MainWindow()
InitializeComponent();
ItemsSource = new List<int>() {1, 2, 3, 4, 5};
DataContext = this;
public List<int> ItemsSource
get;
private set;
public int SelectedItem
get
return selectedItem;
set
SetSelectedItem(value);
public event PropertyChangedEventHandler PropertyChanged;
Try:
Run the program
Choose "1" in combo box
Choose "Yes". Value in the combo box will change to "1"
Choose "2" in combo box
Choose "No". Value in the combo box will change to "2" despite that value in the viewmodel will remain "1".
What's interesting is that property getter is actually being called during execution of the setter. But combo box still displays incorrect value.
How can I fix that?

>>What's interesting is that property getter is actually being called during execution of the setter. But combo box still displays incorrect value.
>>How can I fix that?
Just raise the PropertyChanged using the dispatcher:
private void SetSelectedItem(int value)
if (MessageBox.Show("Are you sure?", "Test", MessageBoxButton.YesNo) == MessageBoxResult.Yes)
selectedItem = value;
if (PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs("SelectedItem"));
else
Application.Current.Dispatcher.BeginInvoke(new Action(() =>
if (PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs("SelectedItem"));
return;
Then the event will be raised after the ComboBox control have sets its internal selection.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't ask several questions in the same thread.

Change scene in scene graph

I'm writing a game with JavaFX. For the different screens I decided to implement them as different Scenes, so clicking on an action would swap the scene in the application.
The initial scene is naturally attached to the scene graph. Any scene that is later replacing the scene in the scene graph is not. When swapping it in, certain layouting for the scene is not done.
While I know how to circumvent this (by calling the additional layouting methods, which are bound to the scene size change, when swapping), there are some things that I would like to understand:
Is there a better way to do this?
Is there a method on the scene that could be called to force the proper layouting
Why does the scene only change initially when attaching it to the scene graph before showing it, but not when changing the scene at runtime?

This looks like RT-30392. It is fixed in JavaFX 8.
Another way to approach this is to use a single scene, and change the contents of the scene by calling setRoot(...). This works around the bug; I also usually find this approach a little cleaner as you only need access to the Scene, not to the stage.

Time Quotas Updation when EE change from one grp to another group

Hi Experts,
Actually I have Two Quotas "A and B " in my Project will be updated based on EE Subgrp on monthly bases
when EE change EE subgrp in the mid of Month will new quota get generated or not ?
if Yes, how the process of Quota Updation please let me konw.
Thanks
Sreeni

Hi
Please make your Question more clear and Try to generate absence Quota through the Tcode pt_qta00 in Test mode and check the result.
Regards
Suresh.V

LTA is getting Double when EE changes Department /Designation in mid of the

Hi Sapiants,
LTA amount is getting Double when EE changes Department /Designation in mid of the month. what is the reason behind this problem.
Regards
vinmax

Dear Delik,
Now double appearance of LTA amount is gone by assigning the spec . to Pr.Cl. - 06 .Your answer helped buddy in this egard. but a new problem is coming. system is populaating some amount with a wagetype. though it is not part of IT 0008.
Thanx
Vinmax
Edited by: kvin kvin on Jul 25, 2008 12:28 PM
Edited by: kvin kvin on Jul 25, 2008 12:29 PM

Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?

My family and I recently got iPhones for Christmas. One for my dad, one for my mom, and one for me. We also have an iPad 2. They are all hooked up to iCloud via one username. When we got the phones, we had trouble transferring our contacts from our old verizon phones to our new apple ones but we eventually got the contacts we needed. At first, my mom's phone was not connected to the iCloud account shared by the rest of us and the iPad. She wanted the calendar from the iPad so I deleted the account on her phone and added the iCloud account that the iPad was using. All was fine until my dad and I realized that our contacts were wiped from our phones and replaced with my mom's. I then started painstakingly deleted my moms contacts and replacing them on my own on my phone. However, contacts were being deleted from my mom and dad's phone at the same time. It's almost like the three phones are constantly synching with each other. It would be ideal if we could get all of our contacts back the way they were before my mom changed her account but we would settle for this constant synching to stop. Please give us some direction here, we are new to this. Thanks in advance!

Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?
Because, as you said "They are all hooked up to iCloud via one username. ". That is exactly what iCloud does.
You need independent iCloud accounts for each person to maintain independent contact lists.

Changing scene when comboBox changed

Similar Messages

Maybe you are looking for