Changing the Cost assignment

Hi,
I need a clarification.
I know that  we cannot change the account assignmnet of the PO item if there are invoices posted.
If I revert back the invoices, will I be able to change the account assignemetn in the PO again?
Kindly clarify?
Thanks in advance.
Regards
Ramesh

Hello,
Yes, you can change the account assignment in this.
Thanks and regards,
Gaurav

Similar Messages

  • Is it possible to change the cost centre assigned to profit centre?

    hi all ,
    We have a requirement to change the old profit centre which was assigned to cost centre , with the new profit centre ... is it possible ? ... is there any problem in doing so ?... what will be the effect of this ? ...
    thank u ... in advance

    Hi,
    u can only change the cost center assigned to profit center before any document posting,
    If even single document is posted or any other postings has done then u cannot change it.
    Regards,
    Pavan.

  • Why can't I change the cost center in PA0001 using PA30?

    Hi Gurus,
    Please help.  I cannot seem to find the means to enter the cost center in the organizational assignment infotype PA0001.  It is showing as greyed out/display only. 
    As background, these personnel files were setup for time entry.  Other infotypes populated that might be impacting it are 0315.  We are not setup for organizational management within SAP.
    As I remember if I don't populate sender cost center/create infotype in 0315, I can change the cost center in PA0001 using PA30, but if I do I'm greyed out.
    Can anyone provide some insights and a possible fix for this?
    Thanks.

    Try turning it OFF by removing the X and saving it.
    Then check on PA30 if the cost center field is enabled for you to enter.
    If this doesn't work, please put the X back in the table and save it.

  • Change the cost center

    Hi all,
    In a report, I must change the cost center for Purchase Requisition and Purchase Order.
    In my opinion I must use the bapi: "BAPI_REQUISITION_CHANGE" and "BAPI_PO_CHANGE", but I don't know how to use.
    Is this correct ?
    If yes, can someone explain to me how to call them to change cost center ?
    Thank you in advance.

    Hi
    Please refer the below link you may useful.
    BAPI_REQUISITION_CHANGE
    Thanks and regards,
    Syf

  • Is it possible to change the costing from moving average to standard??

    hey all,
    i wana know is it possible to change the costing from moving average to standard or vice-versa in the item master??
    cheers

    Hi Satish
    Please look at the documentation from SAP for using this function. I just looked on my drive and can't find the document I used to have for this.
    Just setting quantities to zero will not work as all open P/O, S/O, etc must also be closed before you can run the Inventory Valuation Method function. This is all detailed in the document.
    I have done this successfully before for a client with over 4000 items, so I have been through the process. Please let me know if you need assistance.
    Kind regards
    Peter Juby

  • How to do the cost assignement mandatory in  infotype 0014

    Hi everybody,
    does any of you know how to do the cost assignment mandatory in infotype 0014?
    We have use the feature COBLT  and table T588N for Function Module RP_TIME_COBL_002, and now the field COBL-AUFNR is mandatory, but we need the cost assignment to be mandatory, I mean should be impossible to save a new record without cost assignement. Is is possible using standard functionality or I have to use the user exit in PAI?
    Thanks in advance.
    Cristóbal.

    Hi,
    Instead of user exit, do as below.
    Go to Table using SM30->V_T588M. Give module pool name as MP001400.
    Now check your correct variable key for the feature & click on the corresponding Alternative Screen for e.g. 2010 & now go that field & mark that field as required field by choosing the second radio button.
    Hope this will solve your problem.
    Thanks,
    Sarika.

  • Is it possible to change the Costing Lot size for preference calculation?

    Hi Gurus,
    Is it possible to change the costing lot size for the preference calculation?
    Reason for my question is: We have all prices on price unit 100
    and we want to use also the price unit 100 for preference calcalation.
    But the preference calculation always take price unit 1.
    Is there any possibility to set somewhere the costing lot size for pref.calculation?
    Thanks
    Regards
    Dieter

    Does really nobody has a hint?

  • Include Order number in the Cost Assignment screen in SRM 5.O

    Hi,
    Actually i want to dispay Order Number under the Cost Assignment Tab under the Add item screen under Create Shop in SRM 5.O.
    The order number is present in Acc. Assignment Item Details but i want to display it in Acc. Assignment Overview screen.
    The Template is BBP_PDH_ACC_1000_1  (Acc. Assignment Overview ).
                            BBP_PDH_ACC_2000_1 (Acc. Assignment Item).
    Please let me have any idea or suggestion to acheive the same. It will be really appreciable.
    Raj...

    Hi,
    I have tried it and the Order number displays but it only comes after coming back from  Acc. Assignment Items Screen.
    This is why because, i have used the Structure S_SCREEN_ACCDET of Acc. Item Details screen (SAPLBBP_PDH_ACC_2000_1)  in Acc. Overview screen (SAPLBBP_PDH_ACC_1000_1) in SRM 5.0, because the sructure T_SCREEN_ACCLIST in Acc. Overview screen doesn't contains Order number.
    I think The other option can be going to the Screen in SAP and we can include the Order number there itself. I have found the Screen and code , where we can do it But Can you please give me an idea, Is there any another option to acheive the same..
    Looking forward to your valuable suggestion.

  • Cost center assignment view as soon as the open the cost assignment section

    Hi SRM Experts,
    When creating a shopping cart we have to click several times to view the cost center assignment, is there a way to have it viewable as soon as the open the cost assignment section to complete their project code information.
    Standard Process: Item Details -> Cost Assignment -> Details -> Cost Center (here we are able to enter cost center) - BBPSC02 Transaction
    Required Process: Item Details -> Cost Assignment -> Cost Center (here we are able to enter cost center)  - BBPSC02 Transaction
    SRM Version: 4.0 and Extended Classic Scenario.
    Thanks a lot in advance for your help.
    Thanks,
    Sudarsan
    Edited by: KOYYA SUDARSANA NAIDU on Mar 12, 2009 11:17 PM

    Hi,
    Cost centre should be displayed by default if you check the Defualt check box for that user in the org.structure attribute setting for CC attribute. So check the default check box against the CC.
    Or
    If your user is only using Cost Centre then exclude WBS element and other account assignment for that user in the org.structure attribute then the user defualt to cost centre only. Please note that this applicable only if that user don't want to use WBS element anymore.
    Cheers!!!
    NMK

  • Can we change the Day assignment in IT 2011

    Hi All,
    I have a query about Day assignment in IT 2011. My clients wants to change the day assignment in IT 2011 according to the requirement. I know that we can change the day assignment manually in IT 2011 . But it is a hard task to do for all employee.
    So is there any config or programme to alien this day assignment according to our requirement.
    I need your help to resolve this requirement.
    Regards,
    Tanuja

    Thanks Sikinder for your quick reply.
    Can it be the only way to do so. Is there any Config to solve this issue?
    Kindly suggest.
    regards,
    Tanuja

  • Want to change the cost element for a activity type (KP26)

    Hi,
    I want to change the Allocation cost element for an activity type in KP26. I have already changed the cost element in the activity master data in KL02. Now i want to change it in KP26. I am trying to delete the existing line item in KP26  to create the new line item with the new cost element, but system not allowing to delete the existing one. It throws the error message ""Allocations with XXXXXXX/XXXX (Cost center/Activity type)  exist ; deletion not possible". Can someone please help me to change the cost element?
    Regards
    Dev

    Hi Rao and Lalit,
    Thanx for you people for helping me. i havin gone doubt here. If i am deleting the existing line in KP26 and create new line with appropriage cost element will it be cause the existing datas? I don't want to go for another activity type, because our process is a complex process exist all over the world in more than 300 company codes. So i want to use the existing activity type but want to change the allocation cost element alone. Is there any possibility to change the cost element alone?
    Regards,
    Dev

  • I want to purchase Creative Cloud and install on PC and Laptop does this change the cost?

    i want to purchase Creative Cloud for small business and install on PC and Laptop does this change the cost?
    Steven

    No.
    Mylenium

  • Changing the costing method

    Hello,
    We are looking for approaches/feasibility in changing the costing method.
    From FIFO to Average or Standard.
    Oracle EBS version is 11.5.10.2.
    Any pointer in this regards would be of great help.
    Thanks,
    Sathish

    Hi,
    What Nagamohan have suggested is the best solution. But take in mind the following steps need to completed for changing the costing method.
    1) Create a new inventory organization with new costing method
    2) Move the items & onhand quantity from old inventory org to the new inventory organization
    3) Issue out the onhand quantity from old inventory organization
    4) Migrate the bill of materials if any to new inventory organization.
    5) Migrate the routings if any to new inventory organization
    6) Take care of open Purchase Orders, Sales Orders and Jobs.
    7) Modify the custom reports which is referring to the old inventory organization.
    If transaction history is required that need to be migrated in addition to that.
    Thanks,
    Saravanan

  • Where to change the cost center in material document?

    Hi everyone,
    I have a problem. Last month, I've created a new business area, with its own division and cost center.
    In the test client, the whole process of creating requisition, PO, goods receive, cancel goods receive (return to vendor), create sales order, delivery and goods issue went well.
    But, today, when one of my users tried to cancel goods receive (movement type 102), the following error message was displayed:
    KMXX/KM11 CTR belong to business area M110 not M140.
    Since the PO was created for a stock item, there is no account assignment, so I am wondering if I have missed out something in configuration, especially in defining account assignment for automatic posting? Can anyone help?
    Thank you very much.
    Anisah

    HI,
    There should have been some changes done in the system after thr initial docs were created.
    Please ensure that the said cost centre of interest is assigned to the appropriate Business area.
    The error seems to be an invalid combination of the Business area to the cost centre.
    If not then please maintain the same.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Change default cost assignment specification

    Hello,
    I do have an organisation which assignes all travel expenses to (project) orders instead of cost centers.
    Is there a way to change the default cost assignment (cost centers) to (project) orders on the travel expense WebDynpro?
    As there is no project order maintained in any employee related Infotype this should force the traveller to select the appropriate (project) order from a list.
    Thanks for your feedback,
    Wolfgang

    Hello Wolfgang
    Good news you can do this by customizing
    You can even hide unused cost objects if you need only orders.
    This can be customized here : Financial accounting (new) => travel management => Employee Self-Services => Interface Configuration for web dynpro interface in travel management => Set up variable layout for account assignment objects
    Hope this helps
    Mathieu

Maybe you are looking for