Changing UoM of a component in Sale Order

Hello everyone,
We are faced with the following issue:
1) For a material A there is a BOM created which has material B as a component.
2) The base UoM for both the higher level item as well as the component is CS.
3) The sale UoM for the higher level item is ACB.
4) There is no sale UoM maintained for the component material.
When a sale order is created for material A using VA01, the UoM for A as well as B is CS.
The requirement is that the UoM for B should always be ACB.
We have tried some user exits also but the UoM for B is always reflected as CS.
How to solve this problem?
Best regards,
Ronnie
4)

Hello,
I would also like to create purchase order with article components (DB view MDSB, table RESB) and can not find any BAPI or FM with component interface. I'm using BAPI_PO_CREATE1 for creating PO, but ther is no interface for components.
Thank You in advance for help.
J.
EDIT: We are using version 4.6C...
Edited by: Jana Bittnerova on Jan 23, 2008 9:28 AM

Similar Messages

Is their any standard web dynpro component for Sales Order Creation

Hi ,
I want to create a web dynpro component for Sales order creation.So i want to know is their any stardard web dynrpo component to use or we need to develop custom component.
Thanks & Regards,
Aditya Tanguturi.

Hi Aditya,
There is a standard component for Sales order maintenance : LORD_MAINTAIN_COMP
Note: It is also used to create / change /display the quotation/inquiry as well
Regards,
Rama
Message was edited by: Ramakrishnappa Gangappa

Change of Sold to Party in Sales order created with Reference to Contract

Dear Gurus
I want to change the sold to party in Sales Order created with reference to contract.
When I create a Sales order with reference to contract the system copies all the partner functions- Sold to, Ship to, Bill to and Payer alongwith other data.
However Sold to is marked as "Grey" and not changable, rest of the partners can be changed.
There is no subsiquent document created with reference to this Sales Order.
Please advice.
Thanks a lot.
Regards
Raghu

Hi ,
Please follow the below mentioned step.
1) Create a partner function letts say Authorized SP .
2) Assign all the possible authorised SP (customer) in the contract.
3) When you create sales order with reff to Contract. Put the customer for whom you wish to create a sales order in release partner tab.
Hop this will resolve our problem
Regards,
Krishna O

The IC WebClient profile does not have a component 'ERP Sales Order'

Hi CRM Experts,
While creating the ERP Sales Order in web-IC
we have bumped into following error:
"The IC WebClient profile does not have a component 'ERP Sales Order'".
And also we are not able to see sales area data and Plant data in the drop down lists.
we have done the following settings:
1) ERP Sales Order Profile:we have defined ERP Sales Order profile,maintained RFC destinatin and assigned document type to ERP Profile.
2) Business Transaction Launcher: We have defined the Business Transaction Profile and assigned dependent business transaction.
3) We have assigned the Business Transaction Profile to the Navigation Bar Profile.
Please suggest me regarding above error also let us know did we miss any configuration?
Waiting for your valuable inputs.
Regards,
Sree.

Hi Sree,
There is a setting needed for the IC webclient
ERP_SALES_ORDER
you need to define ERP sales order profile and assign it to your ic webclient profile.
And the ERP sales order scenario can only be used with a ERP 6.0 backend system, at least.
Hongyan

Scehdule Line Date getting change to future date once the Sales Order is saved

Hello Experts,
Good Morning to you all,
This is with respect to the Issue we are facing for the Orders having Product Allocation on multiple materials. Please find enclosed the detials below.
Issue : Scehdule Line Date getting change to future date once the Sales Order is saved. These Order's are having Product Allocation on multiple materials.
Description:
We have implemented Product Allocation few months back.
We have Product Allocation on multiple materials which are in demand and has been reserved for the Customers of different PA behaviors.
When we are trying to create the Sales Orders for the normal customer who is not on Product Allocation. The Order Schedule Line is getting changed to future date once the Sales Order is saved after initial creation.
These Order's are having materials of Product Allocation.
I have enclosed the sample screen shot of the error we are getting which saving the Sales Order and also the Order Schedule Line screen shot showing future date.
Error Message : There may be Product Over Allocation in Delivery Group 001.
Message No : VV023
This is a random behavior we are coming across and out of 10 Order 2 or 3 Orders is getting this Issue.
Please share your inputs how to rack this Issue.
Your suggestions will be highly appreciated.
I am unable to upload the attacments dont know what the reason.
Thanks,
Farhan.

Check whether you need to carry out the coding corrections as recommended in the following note:-
Note 52067 - Message VV023/VV024, but no prod.alloc.processing
But I wonder this is for older versions and not sure whether this would help you to overcome from the issue.
G. Lakshmipathi

Do not change the payment term created a Sales Order with reference

Hi Gurus,
Do not change the payment term created a Sales Order with reference to a contract where the payer of the change in Sales Order.

Hello ,
As per my understanding , you do not want the payment terms to be changed even if the payer partner function is changed ,
as standard sap redetermines the payment terms with change in partner function, you may use the exit
USEREXIT_MOVE_FIELD_TO_VBAK- header level
USEREXIT_MOVE_FIELD_TO_VBAP- Item level
in this you could write a small code which will not change the payment terms when payer is redetermined
hope this helps
Thanks
akasha

Changes Allowed on the 3rd Party Sales Order when PO is created

Hello,
We have a requirement to change the Sales Order even if the PO is already created for teh 3rd party order. I am not sure which fields and what changes can we do if the PO is already created for the 3rd Party sales order.
Can you please guide me in pointing to the configuration or any user exit that we can control the field changes on the 3rd party sales order when teh PO is already created.
Thank you!
Chandrakant

Venu,
FIRST ANSWER THE BELOW TWO QUESTIONS.
1. Did you understand what Shiva has mentioned?
He has clearly mentioned that you can change the PO qty and in standard it self the same PO changed qty will be reflected in Sales order schduline lines qty, and he also mentioned that if this is not happening then advised to refer the Note 1361281.
2. Did you read the note?
It says that It will occur if the sales order line item is part of the delivery group or if you have set the complete delivery indicator for the sales order. And it also advised to apply the program code to over come the issue.
Please note: before commenting others just check once in system then talk, don't just blindly through the ball, it will not have good results.
Before also mentioned the same, but you still repeating the same.
Sorry Moderators that i have mentioned some lines in the Note here.
thanks,
Srinu.

Issue while updating(Changing) quantity on line at quick sales order form

Hi,
I am facing a issue while changing quantity ordered on the order line in quick sales order form. (R12.1.3)
Although the same logic works exactly as required in 11.5.9.
There is a custom logic, post booking line status is Awaiting Shipping.
Now when quantity is changed +(Saved), the status changes to a custom state but at the same time a new row is created with the same line id but different reservation id in the MTL_RESERVATIONS.
The quantity here is the difference between the original quantity and the new entered quantity.
And post completion of the custom logic the original row is updated, but being there a additional row the quantity reserved at the shipping tab comes wrong.
Our requirement is of update which is happening but not the additional insert which is going into MTL_RESERVATIONS.
The logic is perfect in 11.5.9 and no additional insert is being made.
Kindly help and give some ideas for the possible reason the issue.
Please ask for more information if required.
Thanks,
Vishal

Hi Mahendra,
I have gone through the note id that you have given. sorry to say that, that is refering to diffrent issue.
Actually what i did is, At form header level, I have hide the fileds using the folder options. once after changes I have closed the form and re-opened it. by that time I can see that Button names got changed in bottom of the "Quick sales order form". Not sure how it become changed. there five buttons over the form, only two button names got changed.
Kindly suggest any other options.

System doesnt let me change the delivery quantity greater than sales order

Hi,
In delivery document , when I change delivery quantity greater than related sales order quantity , system just show the Message no. VL363 but let me change the quantity.
Is it any way that system do not let me to change delivery quantity greater than its related sales order?
thanks.
Lida.

Is it any way that system do not let me to change delivery
quantity greater than its related sales order?
Go to zeroVLP, select the item category and maintain "B" for the field Check overdelivery

Cannot change Tax Code from the referenced sales order line

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

Changing Profit Center in Partially Delevered Sales Order

Dear Experts,
Can anybody tell me how we can Change Profit Center in Partially Delivered Sales Order?. in Standard, System allows to change PC in open sales Order without any subsequent documents.
There is business requirement to change PC in all Open Sales Orders.
br,
vgl.

Try this.
Go to MASS, Key in Object Type BUS2032, select Table MASSVBAP and click on "Fields". There select the field "MASSVBAP-PRCTR" and execute.
Next paste those open sale orders and again execute. There maintain the required Profit Center on top cell and click Carry out mass change.
thanks
G. Lakshmipathi

Any Change in PR00 should block the sales order

Dear All,
i have a requirement that whenever anyone changes the price(PR00) in the sales order, it should be blocked. Basically we want to control any price changes at order level.
Can someone please suggest any other option how to control the same....
Thanx in advance...

Hi
One of the option is to handle the requirement using user exits. Since the value can be changed manually during create and change of sales order, the logic should be different for the two scenarios.
During create(VA01), if the value for the field KOMV-KHERK (Condition Origin) is 'C-Manually entered' then the document should be blocked. You can see this field in the sales order by selecting the condition and click on the blue lens. This option is not useful for VA02 because this field will always have C and every time when the order is saved from VA02, the order will be blocked.
During sales order change (VA02), the system should check the current value of PR00 and the value exisitng in the table KONV (passing the document condition number) and if there is a difference, then the document should be blocked.
This is one of the alternative. You can also find a better field that can handle both the scenarios.
Thanks,
Ravi

Monitor the changes of Ship to address in Sales Order

Hi,
My client has an requirment which they would like to monitor whether the ship-to-address has been modified after the order were save.
e.g.
Sold-to 12345
Ship-to 12356
SAVE the order
After the order are sale and sometime later, the user went in VA02 and update the ship-to-address to 23456
now
sold-to 12345
ship-to 23456
It there anyway we can have a report to check if the ship-to has been changes?
thanks,
Rebella

Hello Rebella,
The best option of monitering the changes incurred fro the Ship-to-Party details of a SALES ORDER are as follows:
If you are interested to pick up the information of changes values of Ship-To-Party from a Sales Order then i think you can use the table VBPA. This table will contain the updated value of Ship-To-Party partner function of a Sales Order.
Second option would be to use a program which actually run when you open a Sales Order in VA03 --> Environment --> Changes. You can develop a t-code which shall call this program.
You can also use the T-code AUT10 for tracking changes for a Sales Order.
Hope these infotmation helps you in resolving your issue and please don't forget to mark your thread as closed.
Regards,
Sarthak

Unable to change requested delivery date in the sales order at item level.

The issue is when I create order with one material (linked to network and project is created automatically in the background), I am able to change (in change mode) req delivery date for an item, but when I create order with 2 materials (linked to network and project is created automatically in the background), I can not change (in change mode) the req delivery date of any item. Req delivery date is then copied from the header req delivery date.
Is this a standard SAP functionality or a defect?

Req del date is the date requested by customer and can be changed at item level. Probably the confirmed date in the schedule line is derived from the network scheduling after ATP check. (ATP check is not activated in this case)
I am able to change the req del date at item level if there is only one item (Linked to network) and not when there are two line items (Both are linked to 2 diff networks belonging to same project)
I tried to change the date in the network, scheduled and saved but that didnt change the date in the sales order. On the contrary, if I run ATP check, netowrk dates get back to original dates derived from sales order.

Change Request demanded while creating a Sales Order

Dear All,
I am creating a Sales Order. The solution is using user exits to communicate between SD and TEM.
Whenever we create a Sales Order its corresponding sales order and line item is updated in TEM table HRVPAD25.
While saving the Sales Order, its asking for a Change Request which is by default the Customizing Request created for functional configuration of that particular solution.
Sales orders however are created successfully.
Can anyone throw some light on the issue?
regards,
Prosenjit.

Solved

Changing UoM of a component in Sale Order

Similar Messages

Maybe you are looking for