Channel.Call.Failed

Hi All,
     We are using Flex 3 and BlazeDS in my project. I am getting following error when user performs some backend calls. After some time we are not getting any error for the same backend call. It is happening very randomly
fault = (mx.rpc::Fault)#243
    errorID = 0
    faultCode = "Channel.Call.Failed"
    faultDetail = "NetConnection.Call.Failed: HTTP: Failed"
    faultString = "error"
    message = "faultCode:Channel.Call.Failed faultString:'error' faultDetail:'NetConnection.Call.Failed: HTTP: Failed'"
    name = "Error"
    rootCause = (Object)#244
      code = "NetConnection.Call.Failed"
      description = "HTTP: Failed"
      details = "https://<server>/<context root>/fmb/amfsecure"
      level = "error"
Kindly suggest me a solution for this.
Thanks,
Pradeep.

After a lots of research, I found following request is send from Flex to Server as:
03-Feb-11 04:27:03 DEBUG Logger Endpoint.AMF : Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/73)
    (Array #0)
      [0] = (Typed Object #0 'flex.messaging.messages.CommandMessage')
       operation = 12
        correlationId = ""
        body = (Object #1)
        messageId = "1EDDFEEA-C98A-B355-332F-EAD8A753232C"
        clientId = null
        timeToLive = 0
        timestamp = 0
        headers = (Object #2)
          DSId = "19FCCA68-EB08-EFBE-EEDA-4C8582B5A291"
        destination = ""
Flex sends CommandMessage.DISCONNECT_OPERATION request to Server.
I want to know exactly why/when this request is send to server.
Looking forward to a positive response

Similar Messages

Error occasional - faultCode: Channel.Call.Failed

Please help me
In my application occur this error randomly
faultCode: Channel.Call.Failed
faultDetail: 'NetConnection.Call.Failed: HTTP: Failed'
faultString: 'error'
http://www.rarusflats.com.br/Senap1.jpg
http://www.rarusflats.com.br/Senap2.jpg
I see this post and i Add a Blank Application.cfm, in folder
cfc , But not resolved
http://www.coldfusiondeveloper.com.au/go/news/by/jeff-douglas/20080523-flex-3-remoting-err or-channelcallfailed/
http://www.rarusflats.com.br/Senap3.jpg
Exist any solution to resolve this error of “faultCode:
Channel.Call.Failed” ?
And in COldfusion exist any Log to see error for this ?
I already tried that occurs when the error access the Gateway
of Flex
http://www.rarusflats.com.br/flex2gateway/
But when the screen is blank, in the case in operation
correct?

Hi,
Can you please try tracing the FaultEvent.fault.rootCause
object and see if there is any error message. Usually exceptions
thrown from the server is available in this rootCause object.
Hope this helps.

Channel.Call.Failed NetConnection.Call.Failed: HTTP: Status 500 with amfphp php and mysql

I have been scripting a simple database connection to check login credentials and am comming accross these errors:
Channel.Call.Failed
NetConnection.Call.Failed:
HTTP: Status 500
Any PHP code I run that is not connecting to MYSQL runs fine. But if I try to connect to the database thats what I get.
Here is my mxml:
<s:RemoteObject id="LogInService"
                             source="Novus.NovusUser.getLogIn"
                             destination="AMFPHP"
                                                            fault="faultHandler(event)"
                             showBusyCursor="true">
                              <s:method name="getLogIn" result="onResult(event)" fault="faultHandler(event)"/>
</s:RemoteObject>
Which calls this actionscript:
private function btn(event:Event):void
                                             switch(event.target.id)
                                                       case "LogInSubmit":
                                                                      LogInService.getLogIn(UserName.text, PW.text)
              break;
                              private function onResult(result:ResultEvent):void
                                             Alert.show("Result " + result.token.result);
                                             if(result.token.result == true)
                                                            currentState = "Main";
                                             else
                                                       Alert.show(String(result.token.result));
                              private function faultHandler(fault:FaultEvent):void
                                             CursorManager.removeBusyCursor();
        var errorMessage:String = "code:\n" + fault.fault.faultCode + "\n\nMessage:\n" + fault.fault.faultString + "\n\nDetail:\n" + fault.fault.faultDetail;
                                             Alert.show(errorMessage);
and calls this PHP:
If I comment out the database connection it returns a false value to me just fine but with it there it throws an error
<?php
class GetLogIn
               private $_db;
               public function getLogIn($U, $P)
                         //Connect To Database
                         $hostname='127.0.0.1';
                         $username='root';
                         $password='*********';    //not realy ***** blocked it out
                         $dbname='mydatabase';
                         try
                                        mysql_connect($hostname,$username, $password) OR DIE ('Unable to connect to database! Please try again later.');
                                        mysql_select_db($dbname);
                                        $sql = "Select * FROM empusr WHERE UserName = '$U' and Password = '$P'";
                                        mysql_close();
                                        if ($sql)
                                                       return true;
                                        else
                                                       return false;
                         catch
                                        return 'Unable to connect to database! Please try again later.';
?>
I have a crossdomain.xml but I am unsure if I have it placed right.
I also have a services.conf but am unsure if that also needs to be altered to adjust for MySQL.
Any help would be appreciated.

Found the problum
The connection string had to be placed in the public _constructor function of the class.
<?php
class EmployeeService
          public function __construct()
                    $hostname='127.0.0.1';
                    $username='root';
                    $password='*********';
                    $dbname='myDatabase';
                    mysql_connect($hostname,$username, $password);
                    mysql_select_db($dbname);
          public function logIn($N, $P)
                    $query = "SELECT * FROM EmpUsr WHERE UserName = '$N' AND Password = '$P'";
                    $result = mysql_query($query);
                      if ($result)
                                return true;
                      else
                                return false;
?>

AIR app :: Channel.Call.Failed faultString:'error' faultDetail:'NetConnection.Call.Failed:

I have built an AIR app using ColdFusion 8.01 as the backend. I am getting this error occasionally on Remote Object calls. My suspicion is that the Channel being used by the RemoteObject is timing out. I'm not bothering to configure the Channel separately, I'm just going with the default that is part of the RemoteObject.
I'm using Cairngorm, with a ServiceLocator and my thought is that I could separately define my channel from the RemoteObject declaration and listen for timeout events on the Channel and refresh the Channel if it times out.
I'd be really interested in anyone's feedback on this issue.
Jeff

Hi,
Can you please try tracing the FaultEvent.fault.rootCause
object and see if there is any error message. Usually exceptions
thrown from the server is available in this rootCause object.
Hope this helps.

Random Net connection call failed errors

Hi All,
I've built a Flex application which is calling coldfusion CFC through remote objects in order to retrieve data.
2 days ago, I've updated the server with coldfusion 9 and my issue is that I have sometime those kind of error messages :
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Failed"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 503"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 500"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 504"]
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://servername/flex2gateway/'"]
It was also happening on Coldfusion 8 and even on one other sever with another application.
(but same logic Flex -> remote Objects -> CFC -> sql2005).
When we were still running CF8 I added this <add-no-cache-headers>false</add-no-cache-headers> to the service-config.xml file but with no success.
I do not know if it's related to this but I also sometimes have this error message :
[RPC Fault faultString="Channel disconnected" faultCode="Client.Error.DeliveryInDoubt" faultDetail="Channel disconnected before an acknowledgement was received"]
Most if time the application is running fine, but I want to avoid this errors.
For example yesterday I recieved +- 50 times the NetConnection.Call.Failed error and 20 times Channel disconnected error.
Do not hesitate to ask if I need to post CF9 settings summary or something else.
Thank you for your help.
Aubry

That's a pity, but thanks for the reply.
Dik

BlazeDs Channel Call Error

Hi,
I am using Flex/AS, BlazeDs and Java in my application.
But randomly i keep on getting. Most of the times it works but at times it happens. Cant tell the exact scenario.
Fault Code: Channel Call Failed
Fault Detail: Error
I cannot understand why this is occuring on our application. I have set all the properties correct.
Is this because the channel is getting disconnected? If yes why is that happening so? Am I am missing some properties to set for the channel.
Please find my channel definitions
This is present in services-config.xml.
<channels>
                    <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
                                        <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint" />
                                        <properties>
                                                       <add-no-cache-headers>false</add-no-cache-headers>
                                        </properties>
                    </channel-definition>
                    <channel-definition id="my-secure-amf" class="mx.messaging.channels.SecureAMFChannel">
                              <endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint" />
                              <properties>
                                        <add-no-cache-headers>false</add-no-cache-headers>
                              </properties>
                    </channel-definition>
        <channel-definition id="my-streaming-amf" class="mx.messaging.channels.StreamingAMFChannel">
                  <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/streamingamf" class="flex.messaging.endpoints.StreamingAMFEndpoint"/>
                    </channel-definition>
                    <channel-definition id="my-polling-amf" class="mx.messaging.channels.AMFChannel">
                              <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling" class="flex.messaging.endpoints.AMFEndpoint" />
                              <properties>
                                        <add-no-cache-headers>false</add-no-cache-headers>
                                        <polling-enabled>true</polling-enabled>
                                        <polling-interval-seconds>4</polling-interval-seconds>
                              </properties>
                    </channel-definition>
          </channels>
and in my remoting-config.xml i have default channel for all the destinations.
<default-channels>
            <channel ref="my-amf" />
          </default-channels>
So please let me know if am doing something wrong.
Can anyone please help how to sort this out as we are nearing our Production release?
Thanks
Srirama

I'd like to reply to Franck W's comment. Instead of moving BlazeDS to Apache we just made a new release of BlazeDS available on http://sourceforge.net/adobe/blazeds/wiki/Home/. There are dedicated forums for BlazeDS which are monitored by the Adobe team. Professional, enterprise support is provided for Data Services by Adobe. You can switch to Data Services anytime without code changes.
Juergen Hauser, Adobe Systems Inc.

Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500

I get the following error when trying to connect to my BlazeDS Java server from Flex application. Flex application is on localhost:80, blazeDS on tomcat localhost:8080. Please help!
createUser();faultHandler():(mx.messaging.messages::ErrorMessage)#0
body = (Object)#1
clientId = (null)
correlationId = "9FFDEBE8-EAD0-F3D9-8E9B-E3D7D7F5AE79"
destination = ""
extendedData = (null)
faultCode = "Client.Error.MessageSend"
faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
faultString = "Send failed"
headers = (Object)#2
messageId = "98F54E19-7B0D-DCB9-4B86-E3D7D84E484F"
rootCause = (mx.messaging.events::ChannelFaultEvent)#3
    bubbles = false
    cancelable = false
    channel = (mx.messaging.channels::AMFChannel)#4
      authenticated = false
      channelSets = (Array)#5
      connected = false
      connectTimeout = -1
      enableSmallMessages = true
      endpoint = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      failoverURIs = (Array)#6
      id = (null)
      mpiEnabled = false
      netConnection = (flash.net::NetConnection)#7
        client = (mx.messaging.channels::AMFChannel)#4
        connected = false
        maxPeerConnections = 8
        objectEncoding = 3
        proxyType = "none"
        uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      piggybackingEnabled = false
      polling = false
      pollingEnabled = true
      pollingInterval = 3000
      protocol = "http"
      reconnecting = false
      recordMessageSizes = false
      recordMessageTimes = false
      requestTimeout = -1
      uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      url = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      useSmallMessages = false
    channelId = (null)
    connected = false
    currentTarget = (mx.messaging.channels::AMFChannel)#4
    eventPhase = 2
    faultCode = "Channel.Connect.Failed"
    faultDetail = "NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
    faultString = "error"
    reconnecting = false
    rejected = false
    rootCause = (Object)#8
      code = "NetConnection.Call.Failed"
      description = "HTTP: Status 500"
      details = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      level = "error"
    target = (mx.messaging.channels::AMFChannel)#4
    type = "channelFault"
timestamp = 0
timeToLive = 0

halodev:
I made a CF/Flex site based on the Flexstore sample app,
using a database instead of XML as the data source; in case you
want to see it:
http://www.timos.com/dg/flex/DilemmaGames.html
At first I had troubles similar to what you describe;
initially, part of the problem was that my hosting company had not
yet upgraded to CF 7.02. One other thing I had to correct: when you
upload to your server, upload the entire ‘bin’ (or
whatever your output folder is) minus the debug SWF.
If it would help with other issues, contact me and I will be
glad to make my project code available to you. Good luck.
Carlos
[email protected]

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

SOAP: call failed: java.lang.NullPointerException

Hi,
We are geeting the error in RWB -->
SOAP: call failed: java.lang.NullPointerException
We checked the communication channel and interface and all are working fine.
Can anybody suggest?
Regards,
Akki..................

Hi,
use this link to find the answer..
SOAP adapter
Regards,
Amitanshu

BIC XI Adapter call failed

Hi,
I am working on EDI 850 interface in SAP PI. I am using Seeburger adapter for the EDI data conversion. I am able to convert the data successfully and IDOCs are created successfully.
I am facing the problem in creating the 997 (functional acknowledgment) data. Below is the error message received the receiver communication channel:
Message processing failed. Cause: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: InhouseDocReader doSyntaxCheck(): offset[48]: the found segment Functional_Acknowledgment is not in the message description. DESCRIPTION: InhouseDocReader Error: The Segment Functional_Acknowledgment is missing in the message description. Check your file.
In SXMB_MONI i could able to see the Functional acknowledgment xml data under main document. But it is not getting processed successfully to generate the file.
Am i doing any mistake in configuration? Please help me...
Regards,
Vasantha

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

SOAP Adapter recvr.CC unable to call, call failed

Hi,
i'm doing the IDoc to SOAP Scenario for Vendor Master. Sender CC is IDoc Adapter & Receiver CC is SOAP Adapter. Sending the vendor data(SAP ECC) to third party(through WebService) system. In the recv.CC,
in the Connection Parameters>Target URL->i've given the URL given by third party (which is working fine when i open in explorer), & below in Conversion Parameters>SOAP Action also i've given. After sending the vendor from ECC by BD14, it is not received in Webservice.
In the Runtime Workbench,
Component Monitoring-->Communication Channel Monitoring
--> for my recv.SOAP CC, it is showing the error as:
MsgID:----
Explanation
98719886-dbc5-194c-9da7-0cfe8d77082c call failed
98719886-dbc5-194c-9da7-0cfe8d77082c request entering
URL is working fine in the browser.
SOAP Action is rightly given.
Webservice not requires any logon data, so not configured User Authentication.
No Proxy settings we are using.
How to verify about firewall and ports to send SOAP message out of XI Box or network
Any other settings or configurations i've to do in XI system?
what might be the reason for this error. Experts pls help in resolving the same.
rgds,
balu

hi,
thanks for the quick reply..
It is showing:
Status:red symbol
Adapter Type: SOAP
Direction: Receiver
In cluster Node tab,
Processing Errors: in the last 20 hours
Short Log: active
MsgID:----
Explanation
98719886-dbc5-194c-9da7-0cfe8d77082c----- call failed
98719886-dbc5-194c-9da7-0cfe8d77082c----- request entering
Above already i've given the in recvr.CC what & all entered. pls do the needful.
tnx n rgds,
balu

Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK

Hi PI gurus,
Need some suggestions on one issue below -
Scenario - proxy (SAP) to SOAP (Web based system)
In the RWB Communication Channel Monitirong we are receiving the below error
" Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK"
the request from XI system is going to target system and printing the lables (as per the functionality) with no issues but the comminication channel is giving the above error and this is causing the repeated sending the same request to target sytem and the data is printing repeateadly. This issues is occuring in Quality environment.
Strangley the same Interface with the same connectivity details is working fine in Development environment. But not working in Quality environment. Checked the firewalls settings on both in XI and Target system side and confirmed that everything is fine.
Below are the Logs both from Quality and developement are as follows
Quality ( Failure Case)
17.03.2011 07:19:59 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:25:03 Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK
Development (Success ful)
17.03.2011 07:27:55 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:27:58 Success SOAP: completed the processing
When we checked with basis team on user id J2EE_GUEST, they confirmed that they are same in Development and Quality.
I repeat,, that the same target url and everthing is same in XI Configuration
Thanks in Advance. Points would be rewared for the best solution.
Thanks,
Jitender

HI Jitender,
If your scenariois working in DEV and if it is not working in QAS.Could you please check if both the systems are at same patch levels..
Please refer below notes :1551161,817894,952402.
Cheers!!!
Naveen.

SFTP receiver channel error :Failed to create JCA connection.

Hi All,
Facing below error in SFTP receiver channel.
This is the first run of SFTP adapter on our PI server.
Message could not be forwarded to the JCA adapter. Failed to create JCA connection. Reason: c:\temp\sample_ra_output.5.txt (The system cannot find the path specified)
Exception caught by adapter framework: Adapter call failed. Reason: c:\temp\sample_ra_output.5.txt (The system cannot find the path specified)
SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Adapter call failed. Reason: c:\temp\sample_ra_output.5.txt (The system cannot find the path specified).
Please help.
Thanks & Regards,
Nida Fatima

Hi Heiko,
Thanks for correcting me.
PFB the screenshot of my channel.
After this change channel is giving different error :
Transmitting the message to endpoint <local> using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Cannot lookup the ra connectionFactory. Reason: Object not found in lookup of com.sap.aii.adapter.sftp.ra.
Pleas guide.
Regards,
Nida

Flex/Zend channel connect failed error...

Hi guys.
    I am using Flex and php to develop my project. Everything works great in my local machine. However, when I upload my files to my server (godaddy.com). I got the error when loading my flex application.
The pop-up error message is
send failed
channel.connect.failed.error
Netconnection.call.Badversion: url:
http://mydomail/folder/gateway.php
I have upload my ZendFramewrok folder into my server and amf_config.ini has been configured. (webroot =http://mydomain)
I am not sure what's going on here. Please help. Thanks.
Update: my gateway.php
<?php
ini_set("display_errors", 1);
$dir = dirname(__FILE__);
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "$dir/amf_config.ini";
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library'; //I did upload the ZendFramwork folder
//Load ini file and locate zend directory
if(file_exists($configfile)) {
$arr=parse_ini_file($configfile,true);
if(isset($arr['zend']['webroot'])){
$webroot = $arr['zend']['webroot'];
$zenddir = $webroot. '/ZendFramework/library';
if(isset($arr['zend']['zend_path'])){
$zenddir = $arr['zend']['zend_path'];
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
$dirs = $amf->directories->toArray();
foreach($dirs as $dir) {
     // get the first character of the path.
     // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
     $length = strlen($dir);
     $firstChar = $dir;
     if($length >= 1)
      $firstChar = $dir[0];
     if($firstChar != "/"){
      // if the directory is ./ path then we add the webroot only.
      if($dir == "./"){
       $server->addDirectory($webroot);
      }else{
       $tempPath = $webroot . "/" . $dir;
    $server->addDirectory($tempPath);
}else{
      $server->addDirectory($dir);
// Initialize introspector for non-production
if(!$amf->production) {
$server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
$server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
Error from gateway.php if I call it directly.
Warning: require_once(Zend/Loader/Autoloader.php) [function.require-once]: failed to open stream: No such file or directory in /home/content/79/4687979/html/parkerList/gateway.php on line 27
Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.:/usr/local/php5/lib/php:http://blackwheels.info//ZendFramework/library') in /home/content/79/4687979/html/parkerList/gateway.php on line 27
gateway.php is the rat. but I still can't figure out what's wrong. Zend/Loader/Autoloader.php is under the server root "ZendFramework/library" folder. I don't understand why my application can't find it. Thanks again!

You will get a better response if you repost your question on the Flex forums. This forum is for the Livecycle Data Services product.

Channel.Call.Failed

Similar Messages

Maybe you are looking for