Chapter buttons work fine in preview but not in build

Hi,
I am using video as a back ground and overlaying buttons that highlight when selected. The button routing is fine, default button set up, no overrides and it works fine in preview, however when I build it to disk no buttons are highlighted, cannot navigate or select any chapters. I deleted the menu are recreated it but same problem, anybody have any ideas?,
Regards,
Colin Browne - Irish Video Productions

Irish Video wrote:
thanks for your help. The problem was with the aspect ratio of the menu and the background video. Even though it is a 16:9 project the only way I could get it to work was to export the background video again in 4:3, change the menu aspect and re-position the buttons.
Hmmm. If there is a mismatch between menu, video and project PARs, it's possible that things got moved around enough during transcoding to make the close-but-not-overlapping button hit areas actually overlap when the project was built. The fact that repositioning the buttons and adjusting PAR fixed the problem is the biggest clue, IMHO.
At least that's my theory...
Regardless, thanks for posting back with your solution!
-Jeff

Similar Messages

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

Query working fine in toad but not in forms 6i

i have following coding on when button press triger
declare
CURSOR C1(year number,month number) IS
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq)*1 xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_01_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
Begin
     delete from fiaz.tmp_topten_prod;
     for i in c1(:year,:month)
loop
          insert into fiaz.tmp_topten_prod
          values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
     end loop;
standard.commit;
message('inserted in temp');
     exception when others then
          message (dbms_error_text);
          message (dbms_error_text);
End;
Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
i guess union clause is not working in this situation...
plz suggest me the appropriate changes in the query to work well from form as well...
combination:Forms 6i,Oracle 8.0.6
Regards,
Usman Afzal

As per your suggestion i have created a stored procedure but the followin error prevents procedure creation
create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
begin
delete from fiaz.tmp_topten_prod;
insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq) xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
commit;
end;
Error:
"PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
Now where is the problemmmmm
Plz Help

Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

Learning with Lynda.com!
Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
Thanks!

Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

Button works in cp version, but not in swf

I created a click button to take the user to a url in the last slide on my film. The click works in the preview, but it does not work after I've published as an swf. What could be the issue?

Hi there
If I only had a nickel for every time someone here has reported that same issue. I'd never have to worry about money ever again!
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Load swf works in Publish Preview but not when published

Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

ITunes/Apple Mobile Device works fine w/iPod but not iPad

Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article?

Apple TV working fine with Wireless, but not on Ethernet

I just got an Apple tv for my B-day and I can't get the Ethernet port to work.
It works fine on wireless but if i plug in the cable to my 5 port switch that then goes to my router it will not login to the store, or sync or fine youtube. It has and ip and everything. I tried opening that port 38 something. And no go? Does anyone have any ideas?
I have a 2wire router, and one 5 port switch, the PS3, Wii and Xbox all work on the switch just fine.
I even upgrade to firmware 2.01

Thanks for your help guys
I have tried another ethernet cable but no go. I'm going to get a new one at the store today. As for the IP. the first time I plugged it in the IP was way diffrent from the one on my router so i manually added the new ip and subnet mask etc etc. And still no go. It is seen in itunes but tells me it can't sync. And if i go to the Apple TV it will not open any of the web enabled features. No you tube, no store, no nadda.

Javascript works fine in console but not in button

Hi experts
the below save as script works fine while i manually enter in the console and press enter, While I created a button and set action to Run A Javascript its not working
var full_path = this.path;
var this_name = this.documentFileName;
var file_path = full_path.split(this_name)[0];
var new_file = file_path + 'new.pdf';
app.alert(new_file);
this.saveAs(new_file);
Can you please suggest in this?
thank you in advance
regards
arul

For a good tutorial on this subject, see: http://acrobatusers.com/tutorials/how-save-pdf-acrobat-javascript

Rollover image works on dreamweaver/preview but not on website

Hey everybody so I'm working on a site for my new clothing line and I am frustrated out of my mind right now because everything seemed to work fine until I published the site my biggest problem right now is that the rollover images I'm using do not show on the actual site but they work perfectly on dreamweaver and the browser preview PLEASE I NEED HELP
here's the CSS/HTML (Below)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Store</title>
<style type="text/css">
#main .container #content p {
    body, div, h1, h2, h3, h4, h5, h6, p, ul, img {margin:0px; padding:0px; }
body { font-family: Arial, Helvetica, sans-serif; }
    .container {
        width: 1000px;
        margin: 0 auto;
       body {
        font-family: Arial, Helvetica, sans-serif;
        background: #e4e2e2;
.Header {
    background-image: url(images/Doozie-Jank-Website_03.jpg);
    background-repeat: repeat-x;
               #logo {
        background: url(images//images/webheader_08.png) no-repeat;
        height:300px;
        width: 900px;
           #logo h1 {
        text-indent: -9999px;
        padding-top: 40px;
        ul#menu {
        list-style: none;
    ul#menu li a {
        font-size: 35px;
        color: #c7c7c7;
        text-decoration: none;
    ul#menu {
        list-style: none;
        padding-top: 185px;
    ul#menu li {
        float: left;
        padding-left: 60px;
        ul#menu li {
        float: left;
        padding-left: 10px;
        padding-right: 50px;
    #view-cart{
        position:absolute;
right:650px;
top:305px;
#rollover{
    margin:100px 20px;
    height: 400px;
    width: 400px;
    text-indent: 10000px;
    overflow: hidden;
    background: url(Images/deer-in-headlights-store.gif) top left no-repeat;
    display: block;
#rollover:hover{
    background-position: bottom left;
    float:left;
width:110px;
height:0px;
margin:5px;
    #sidebar {
    float: right;
           #sidebar {
        float: right;
        margin-left: 100px;
        margin-top: -62px;
       #footer {
        background: url(images/footer.jpg) repeat-x;
        padding-top: 20px;
        padding-bottom:60px;
        margin-top: 40px;
          color: #fff;
    #footer p {
        padding-top: 20px;
        padding-bottom:60px;
        margin-top: -25px;
        margin-bottom: -25px;
          color: #fff;
      </style>
<body class="Header">
        <div id="main">
        <div class="container">
             <div id="header">
             <div id="logo">
    <h1>Doozie Jank</h1>
             <ul id="menu">
        <li><a href="index.html">Blog</a></li>
        <li><a href="Store.html">Store</a></li>
        <li><a href="About.html">About</a></li>
        <li><a href="Contact.html">Contact</a></li>
         <li><a href="#">Cart</a></li>
</form>
    </ul>
             </div>
             </div>
              <div id="view-cart">
              <form target="paypal" action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_cart">
<input type="hidden" name="business" value="8JUVRPJ32YCFC">
<input type="hidden" name="display" value="1">
<input type="image" src="images/images/button-view-cart_23.png" width="174" height="47" >
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
              </div>
<div id="sidebar">
    <ul>
                     <a href="http://www.facebook.com/home.php#!/pages/Doozie-Jank/137039669686754"><img src="images/Facebook1.png" alt="" width="52" height="54" /></a>
                     <a href="http://twitter.com/DoozieJank"><img src="images/Twitter1.png" alt="" width="52" height="54" /></a>
                    </ul>
     </div>
<div id="rollover">
   <a href="#"></a>
</div>
<div id="Buy">
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<table>
<tr><td><input type="hidden" name="on0" value="Sizes">Sizes</td></tr><tr><td><select name="os0">
    <option value="Mens-S">Mens-S </option>
    <option value="Mens-M">Mens-M </option>
    <option value="Mens-L">Mens-L </option>
    <option value="Mens-XL">Mens-XL </option>
    <option value="Womens-S">Womens-S </option>
    <option value="Womens-M">Womens-M </option>
    <option value="Womens-L">Womens-L </option>
    <option value="Womens-XL">Womens-XL </option>
</select> </td></tr>
</table>
<input type="hidden" name="encrypted" value="-----BEGIN PKCS7-----MIIHZwYJKoZIhvcNAQcEoIIHWDCCB1QCAQExggEwMIIBLAIBADCBlDCBjjELMAkGA1UEBhMCVVMxCzA JBgNVBAgTAkNBMRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3MRQwEgYDVQQKEwtQYXlQYWwgSW5jLjETMBEGA1UECxQKb Gl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2ZV9hcGkxHDAaBgkqhkiG9w0BCQEWDXJlQHBheXBhbC5jb20CAQAwDQYJKoZ IhvcNAQEBBQAEgYBaZt00onBF9omW5G7ULM/EcNNCnIiivONM3VH0WH6H2rr1exR0FqAKPNRpKS9sE4Lem2zGFT5g3 TPdqEh6UlOWUDdC6kLvrd/SH09CnVRzxzGJpJzSRg+wSvTNW3XEtXHOw39A6iW61JJmp8Ew5XfkWUGo/JZpG+BqneK V1cUA7TELMAkGBSsOAwIaBQAwgeQGCSqGSIb3DQEHATAUBggqhkiG9w0DBwQIZ87nV6MhdDKAgcAEYV2EVFvN6yh+A u2TQRUPaYJbD42D+eNHGAlAB0/O1wfwNmnSFzb2p1vTsDnpj8Ab8/sxtKgKjl14GdYOQYEgxzySeN3kVnfxzSHrz7x Qklq/calMzn9Oe7ywDHy6OHdxtAlL2EpCFveckpnegl76FG+Fp/Q8DbXoGxV3Lz+NpADcVuuni4TnD1EhZZ9O4UM9E Z+xx51H1XOrImkVzViUGG6nh6DsdnnPOjSvMKcASB87NiDKyExJu/NeVROHsvCgggOHMIIDgzCCAuygAwIBAgIBADA NBgkqhkiG9w0BAQUFADCBjjELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAkNBMRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3M RQwEgYDVQQKEwtQYXlQYWwgSW5jLjETMBEGA1UECxQKbGl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2ZV9hcGkxHDAaBgk qhkiG9w0BCQEWDXJlQHBheXBhbC5jb20wHhcNMDQwMjEzMTAxMzE1WhcNMzUwMjEzMTAxMzE1WjCBjjELMAkGA1UEB hMCVVMxCzAJBgNVBAgTAkNBMRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3MRQwEgYDVQQKEwtQYXlQYWwgSW5jLjETMBE GA1UECxQKbGl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2ZV9hcGkxHDAaBgkqhkiG9w0BCQEWDXJlQHBheXBhbC5jb20wg Z8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAMFHTt38RMxLXJyO2SmS+Ndl72T7oKJ4u4uw+6awntALWh03PewmIJu zbALScsTS4sZoS1fKciBGoh11gIfHzylvkdNe/hJl66/RGqrj5rFb08sAABNTzDTiqqNpJeBsYs/c2aiGozptX2Rln BktH+SUNpAajW724Nv2Wvhif6sFAgMBAAGjge4wgeswHQYDVR0OBBYEFJaffLvGbxe9WT9S1wob7BDWZJRrMIG7BgN VHSMEgbMwgbCAFJaffLvGbxe9WT9S1wob7BDWZJRroYGUpIGRMIGOMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExF jAUBgNVBAcTDU1vdW50YWluIFZpZXcxFDASBgNVBAoTC1BheVBhbCBJbmMuMRMwEQYDVQQLFApsaXZlX2NlcnRzMRE wDwYDVQQDFAhsaXZlX2FwaTEcMBoGCSqGSIb3DQEJARYNcmVAcGF5cGFsLmNvbYIBADAMBgNVHRMEBTADAQH/MA0GC SqGSIb3DQEBBQUAA4GBAIFfOlaagFrl71+jq6OKidbWFSE+Q4FqROvdgIONth+8kSK//Y/4ihuE4Ymvzn5ceE3S/iB SQQMjyvb+s2TWbQYDwcp129OPIbD9epdr4tJOUNiSojw7BHwYRiPh58S1xGlFgHFXwrEBb3dgNbMUa+u4qectsMAXp VHnD9wIyfmHMYIBmjCCAZYCAQEwgZQwgY4xCzAJBgNVBAYTAlVTMQswCQYDVQQIEwJDQTEWMBQGA1UEBxMNTW91bnR haW4gVmlldzEUMBIGA1UEChMLUGF5UGFsIEluYy4xEzARBgNVBAsUCmxpdmVfY2VydHMxETAPBgNVBAMUCGxpdmVfY XBpMRwwGgYJKoZIhvcNAQkBFg1yZUBwYXlwYWwuY29tAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZ IhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMDEyMjIyMDA1MDlaMCMGCSqGSIb3DQEJBDEWBBQk6iQXTNCxlZ0Ya/ghN unrNqDdYDANBgkqhkiG9w0BAQEFAASBgATYhe/eTtYwK+OI/2w0H1dn+V93E7XKZlvH1o8tpFlSXbsaV2b+G3FGvLO lm82lKFAUx7Rhh3Ft6IineHrbkrAV7XqUpukXNIkwtikxQpOeJtvcuXc9WC4GKR6eLLcm7IOsBTo7XZiLqPVRl8mHZ +9ftudFJDcAOzlVFH86Mhhv-----END PKCS7-----
">
<input type="image"src="images/images/button-view-cart_13.png" width="160" height="43">
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
<form target="paypal" action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<table>
<tr><td><input type="hidden" name="on0" value="Sizes">Sizes</td></tr><tr><td><select name="os0">
    <option value="Men's-S">Men's-S </option>
    <option value="Men's-M">Men's-M </option>
    <option value="Men's-L">Men's-L </option>
    <option value="Men's-XL">Men's-XL </option>
    <option value="Women's-S">Women's-S </option>
    <option value="Women's-M">Women's-M </option>
    <option value="Women's-L">Women's-L </option>
    <option value="Women's-XL">Women's-XL </option>
</select> </td></tr>
</table>
<form target="paypal" action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<table>
<tr><td><input type="hidden" name="on0" value="Sizes">Sizes</td></tr><tr><td><select name="os0">
    <option value="Mens-S">Mens-S </option>
    <option value="Mens-M">Mens-M </option>
    <option value="Mens-L">Mens-L </option>
    <option value="Mens-XL">Mens-XL </option>
    <option value="Womens-S">Womens-S </option>
    <option value="Womens-M">Womens-M </option>
    <option value="Womens-L">Womens-L </option>
    <option value="Womens-XL">Womens-XL </option>
</select> </td></tr>
</table>
<input type="hidden" name="encrypted" value="-----BEGIN PKCS7-----MIIHZwYJKoZIhvcNAQcEoIIHWDCCB1QCAQExggEwMIIBLAIBADCBlDCBjjELMAkGA1UEBhMCVVMxCzA JBgNVBAgTAkNBMRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3MRQwEgYDVQQKEwtQYXlQYWwgSW5jLjETMBEGA1UECxQKb Gl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2ZV9hcGkxHDAaBgkqhkiG9w0BCQEWDXJlQHBheXBhbC5jb20CAQAwDQYJKoZ IhvcNAQEBBQAEgYA2Ark1q/MZdDym/pL5q8HksBbhh5iqXf9XSFGUBz8kBbPu0LNws7WHDlt7oXI5K6E32LGpSB0/2 MDt0yjUHm4qJECrECNnP3/oSCjAlwqUCdZpcNKoAByp89Ky99eUA0tsxiOj+0D38R5SeD9xFMCreOrsPw4wD78/OZx D6WBHVjELMAkGBSsOAwIaBQAwgeQGCSqGSIb3DQEHATAUBggqhkiG9w0DBwQI0oCEjezx30WAgcCSnlZjjBUAslI/r pAIQ1lrHPGr7S18N1n9wsEwIpylhhjFjznjadwwb5S9MHiJsaNy+9P+21Jt3eM4/xNyAjFO8aFvUpDVvfkaUKe4+9u fUz8Q7qknS7XJLUZrh4LB1Rwh7I+k8fKvrdsPLBC7UHGvXzcDBSc8yW+6eteutmfN62zxBJxIf+n6XRpWICX+GOd54 hBDtH1Wj9xEOwoYrY3O9cqFztWUHoF2bL2BRvWp+CjUkCwgjWTcmTsWK0U1Cj+gggOHMIIDgzCCAuygAwIBAgIBADA NBgkqhkiG9w0BAQUFADCBjjELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAkNBMRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3M RQwEgYDVQQKEwtQYXlQYWwgSW5jLjETMBEGA1UECxQKbGl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2ZV9hcGkxHDAaBgk qhkiG9w0BCQEWDXJlQHBheXBhbC5jb20wHhcNMDQwMjEzMTAxMzE1WhcNMzUwMjEzMTAxMzE1WjCBjjELMAkGA1UEB hMCVVMxCzAJBgNVBAgTAkNBMRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3MRQwEgYDVQQKEwtQYXlQYWwgSW5jLjETMBE GA1UECxQKbGl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2ZV9hcGkxHDAaBgkqhkiG9w0BCQEWDXJlQHBheXBhbC5jb20wg Z8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAMFHTt38RMxLXJyO2SmS+Ndl72T7oKJ4u4uw+6awntALWh03PewmIJu zbALScsTS4sZoS1fKciBGoh11gIfHzylvkdNe/hJl66/RGqrj5rFb08sAABNTzDTiqqNpJeBsYs/c2aiGozptX2Rln BktH+SUNpAajW724Nv2Wvhif6sFAgMBAAGjge4wgeswHQYDVR0OBBYEFJaffLvGbxe9WT9S1wob7BDWZJRrMIG7BgN VHSMEgbMwgbCAFJaffLvGbxe9WT9S1wob7BDWZJRroYGUpIGRMIGOMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExF jAUBgNVBAcTDU1vdW50YWluIFZpZXcxFDASBgNVBAoTC1BheVBhbCBJbmMuMRMwEQYDVQQLFApsaXZlX2NlcnRzMRE wDwYDVQQDFAhsaXZlX2FwaTEcMBoGCSqGSIb3DQEJARYNcmVAcGF5cGFsLmNvbYIBADAMBgNVHRMEBTADAQH/MA0GC SqGSIb3DQEBBQUAA4GBAIFfOlaagFrl71+jq6OKidbWFSE+Q4FqROvdgIONth+8kSK//Y/4ihuE4Ymvzn5ceE3S/iB SQQMjyvb+s2TWbQYDwcp129OPIbD9epdr4tJOUNiSojw7BHwYRiPh58S1xGlFgHFXwrEBb3dgNbMUa+u4qectsMAXp VHnD9wIyfmHMYIBmjCCAZYCAQEwgZQwgY4xCzAJBgNVBAYTAlVTMQswCQYDVQQIEwJDQTEWMBQGA1UEBxMNTW91bnR haW4gVmlldzEUMBIGA1UEChMLUGF5UGFsIEluYy4xEzARBgNVBAsUCmxpdmVfY2VydHMxETAPBgNVBAMUCGxpdmVfY XBpMRwwGgYJKoZIhvcNAQkBFg1yZUBwYXlwYWwuY29tAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZ IhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMDEyMjIyMDEzNDdaMCMGCSqGSIb3DQEJBDEWBBRJKopvfz8XYEgCFRqDK +KA57OA4TANBgkqhkiG9w0BAQEFAASBgBUubN3UKQ+CEoLTZ3qIekfqFStHQyAA9mBr6rmkkX0SEMse9IB6N3oQ6V1 JrPwzwwPgX4gRUobUte8TTcLMtpgSmCFtw6Vycd6ygepjjNO/YNKTbgAIRIQdyGvxzaml9JJf59gJqxTwDOwVNW/G3 hzSw3oItgcbXf9EB/o/qXtb-----END PKCS7-----
">
<input type="image" src="images/images/button-view-cart_19.png" width="197" height="44" />
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
   </div>
<div id="footer">
        <div class="container">
          <p>Copyright © 2010 Doozie Jank<br />
            All Rights Reserved</p>
        </div>
    </div>
</head>
<body>
</body>
</html>

Fix your validation errors first -
http://validator.w3.org/unicorn/check?ucn_uri=dooziejank.com%2FDeer%2520in%2520The%2520Hea dlights.html&ucn_lang=en&ucn_task=conformance#
For example, you have no </head> tag....
And it's a very bad idea to use spaces in your filenames for the web
Deer in The Headlights.html

Custom Dashcode widget works fine on mac, but not in iBooks

I wrote a dashcode widget that works fine on my mac but not in iBooks, what am I doing wrong?
I am trying to create a widget that performs a specific calculation when the user inputs the 2 variables. However when I go to preview it on my iPad, the button that performs the calculation disapears. It is visible in the thumbnail, but once you launch to full size... bye bye...
Help is appreciated. Are buttons not allowed?

tk0us wrote:
it sets the size of the widget when displayed as a widget full screen or whatever size the png is
That is not correct. What sets the size of the widget when it runs is the canvas size of the widget, not Default.png.
At the link below, you can find a widget with a Default.png of 140x200 pixels. When you run the widget, it displays at 900x607 pixels.
http://www.triodia.com/staff/michi/drumming/RopeCalc.zip
This demonstrates that Default.png has nothing to do with the size of the widget when it runs. Default.png need not even have the same aspect ratio as the widget canvas.
Michi.

Spry email confirmation works in browser preview but not on line

Hi
I've got a problem using spry email confirmation.
It's the usual enter email, then confirm email.
When I preview it on my browser from the local site on my hard drive, it works fine, however when I put the files up onto my web hosting, I get the following problem.
Next to the confirm text field, it shows the two messages which are normally reserved for not matching emails, or having not entered an email. This happens even before I put the cursor in the box.
Code is attached here.
Any help much appreciated.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Bristol Bike Challenges - Register</title>
<link href="bristol_bath.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationCheckbox.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationRadio.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextarea.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationConfirm.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationCheckbox.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationRadio.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationTextarea.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationConfirm.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="container">
<div id="banner"></div>
<div id="top_image"></div>
<div id="spry_menu">
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a href="index.html">Home</a></li>
      <li><a href="route.html">Route</a></li>
      <li><a href="register.html">Register</a></li>
      <li><a href="#">Gallery</a></li>
      <li><a href="#">Charities</a></li>
<li><a href="#">Links</a></li>
    </ul>
</div>
<div id="main_image"></div>
<div id="register_image">Registration - Enter your details below then click submit. You will then have the choice to register another person or move on to payment.</div>
<div id="forms">
    <form id="form1" name="form1" method="post" action="form.cgi">
    <table width="951" border="0">
    <tr>
    <td width="352" height="43"><label for="firstname">First Name(s)</label></td>
    <td width="589"><span id="sprytextfield1">
      <input type="text" name="firstname" id="firstname" accesskey="f" tabindex="10"/>
      <span class="textfieldRequiredMsg">Please enter your first name</span></span></td>
</tr>
<tr>
    <td><label for="surname">Surname</label></td>
    <td><span id="sprytextfield2">
      <input type="text" name="surname" id="surname" accesskey="s" tabindex="20"/>
      <span class="textfieldRequiredMsg">Please enter your surname</span></span></td>
</tr>
<tr>
    <td><label for="address">Address</label></td>
    <td><span id="sprytextarea1">
      <textarea name="address" id="address" accesskey="a" tabindex="30" cols="45" rows="5"></textarea>
      <span class="textareaRequiredMsg">Please enter your address</span></span></td>
</tr>
<tr>
    <td><label for="email">Email</label></td>
    <td><span id="sprytextfield3">
    <input type="text" name="email" id="email" accesskey="e" tabindex="40"/>
    <span class="textfieldRequiredMsg">Please enter your Email</span><span class="textfieldInvalidFormatMsg">Your email address doesn't look right, please check it</span></span></td>
</tr>
<tr>
<td><label for="email_confirm">Confirm Email</label></td>
<td><span id="spryconfirm1">
    <input type="text" name="email_confirm" id="email_confirm" accesskey="c" tabindex="42" />
    <span class="confirmRequiredMsg">Please enter your Email</span><span class="confirmInvalidMsg">Email addresses don't match</span></span></td>
</tr>
<tr>
    <td><label for="telephone">Telephone No.</label></td>
    <td><span id="sprytextfield4">
      <input type="text" name="telephone" id="telephone" accesskey="t" tabindex="50"/>
      <span class="textfieldRequiredMsg">Please enter your telephone number</span></span></td>
</tr>
<tr>
    <td><label for="dob">Date of birth (DD/MM/YY)</label></td>
    <td><span id="sprytextfield7">
      <input type="text" name="dob" id="dob" accesskey="d" tabindex="55" />
      <span class="textfieldRequiredMsg">Please enter your date of birth</span></span></td>
</tr>
<tr>
    <td>Are you male or female?</td>
    <td><span id="spryradio3">
    <label>
      <input type="radio" name="Malefemale" value="male" id="Malefemale_0" />
      Male</label>
    <br />
    <label>
      <input type="radio" name="Malefemale" value="female" id="Malefemale_1" />
      Female</label>
    <br />
    <span class="radioRequiredMsg">Please make a selection.</span></span></td>
</tr>
<tr>
    <td>Which route do you want to register for?</td>
    <td><span id="spryradio1">
      <label>
        <input type="radio" name="routechoice" value="Challenge" id="routechoice_0" />
        Challenge (£10)</label>
      <br />
      <label>
        <input type="radio" name="routechoice" value="Challenge Extra" id="routechoice_1" />
        Challenge Extra (£15)</label>
      <br />
      <label>
        <input type="radio" name="routechoice" value="Challenge Ultra" id="routechoice_2" />
        Challenge Ultra (£20)</label>
      <br />
      <span class="radioRequiredMsg">Please make a selection.</span></span></td>
</tr>
<tr>
    <td>Do you need to hire a bike (£15/day adults, £10/day child)?</td>
    <td><span id="spryradio2">
      <label>
        <input type="radio" name="bikehire" value="Yes to bike hire" id="bikehire_0" />
        Yes</label>
      <br />
      <label>
        <input type="radio" name="bikehire" value="No to bike hire" id="bikehire_1" />
        No</label>
      <br />
      <span class="radioRequiredMsg">Please make a selection.</span></span></td>
</tr>
<tr>
    <td><label for="height">If you're hiring a bike, please tell us your height.</label></td>
    <td><input type="text" name="height" id="height" accesskey="h" tabindex="60"/></td>
</tr>
<tr>
    <td><label for="terms2">Please tick the box to confirm that you have read and agreed to our <a href="terms_conditions.html">terms & conditions</a></label></td>
    <td><span id="sprycheckbox2">
      <input type="checkbox" name="terms2" id="terms2" accesskey="c" tabindex="70" />
      <span class="checkboxRequiredMsg">Please make a selection.</span></span></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
</table>
      <p>
        <label>Click this button to submit these details and move on to the next step -
          <input type="submit" name="Submit" id="Submit" value="Submit these details" />
        </label>
      </p><input name="recipient" value="[email protected]" type="hidden">
      <input type=hidden name="subject" value="New Registration">
      <input type=hidden name="redirect"
                                  value="http://www.ukchallengeevents.com/register_more.html">
    </form>
</div>
<div id="footer"><a href="about_us.html">about us</a> - <a href="contact_us">contact us</a> - uk challenge events ltd - all rights reserved</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>
Cheers Jon

sorry sorry sorry!
Managed to sort it.
My mistake. Made changes to the html file and uploaded only that to the web.
There had been changes to the assets, and i hadn't uploaded them!
I did that and now all is fine
Cheers
Jon

XML data connection works in the preview, but not in the final swf

Hello,
I have set-up a dashboard with an XML data connection button to load XML data from an internet source. Everthing works perfect in the preview-swf within Xcelsius 4.5. But pressing the button in the exported swf does not have any effect. The dashboard is busy for 2 seconds, but no data is loaded. What could be the reason?
Thanks.

Yes, the location is registered. The problem also occours when the swf is opened directly on the web server where the xml-source is running.

Links work in browser preview but not on server?

Hi,
My GL CS application is doing strange things to me HTML code with the result that my links are not working once uploaded to my server. The links on the pages are working in the browser preview but once uploaded to the server the links are dead. I have used the FTP upload from GoLive ( which has worked just fine in the past 10 years) but I notice that the page code is compiled into one single line once published. So I used a Filezilla to upload to the server with the result that the HTML structure is correct and identical to the one stored in Golive, but the links are still not working.
Does anyone have an idea what aspect I am overlooking. Do I have to update/upload the script? I am thankful for any suggestions to resolve this issue.

Hi,
Thank you for your tip in regards to solving the problem with my links. It¹s
still not working 100% but already a bit better. I guess I have to redesign
my site using a more contemporary software.
Thanks,
Arun

Chapter buttons work fine in preview but not in build

Similar Messages

Maybe you are looking for