ChaRM: read categorization of change docs based on transport request ID

Hi There,
We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
Ádám

In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
If you need my complete code, drop me a mail.
Thanks,
Ádám

Similar Messages

  • Change the owner of transport request

    Hi,
    I want to change the owner of transport request. How can i do this ? Plz. Help.
    Regards
    Sandeep

    Hi
    Go to SE10, Enter the transport request number and press F5 to change the owner as per your req.
    Regards
    S.Senthil

  • How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created  ?

    Dear Abapers,
    I request the Abapers kindly reply for this blog
    I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ? 
    I checked in SE03 transaction the transport request was there.  But I want to retrieve the existing transport request which is not moved to Quality?
    Is it possible to retrieve the existing transport request in development which is not moved to quality ?
    Like how we retrieving the programs using versions in development server,  In the same way I want to retrieve the sapscript layout in development server ?
    Thanks & Regards
    Muzeebur Rahiman.S

    Hi,
    There is no version management for SapScript or Smartforms .
    When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
    I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
    cheers
    Jānis

  • Include changes of PH in transport request.

    Hi Experts,
    Able to create transport request which is available in TCode SCAL to transport PH/ Calendar. How can i include only my changes in the transport request.
    for eg. if i have created new holiday calendar "NI" and new holidays id's. How can i include in transport request only my calendar NI and holiday id's.
    Kindly guide.
    Regards,
    M Bharath

    As far as I know, all the tables pertaining to Statutory Holidays, Holiday Calendars and Business/Factory Calendars will be included in the Workbench Transport.
    It may be possible to delete some of the tables from your transport, but I would not recommend it.
    Don't forget that your changes will not have an impact unless you re-generate the Work Schedules using the NI Calendar, and that will be a separate Customizing Transport.

  • How can we change the "Unclassified" in transport request???

    Hi All,
      how can we change the "Unclassified" in Sub Request Description while creating a new transport request
    Thanks,
    Andy

    Hello Roger,
    Try to open your TR and in the Request/Task menu at the top, select Change task type.
    Hope it helps.

  • How to change description of released transport request

    Hi experts,
                The transport requests tasks and are released and owner of TR also released, now need to modify description.
                Is their any possible way to do it, because transport is not moved out of the system.
    Thanks,
    Pavan

    Hi
      There is one way to achieve this.But this s not advisable.
    1.) Got o FM 'TRINT_CHECK_REQUEST_CHANGEABLE'
    At the line number 111 IF is_request_header-trstatus CA sctsc_states_released, put the break point.
    1.) Double click the released request which you want to change the description.
    2.) your EDIT option will be disabled. Just type '/h' in the tcpode area and press enter, your debugging will switched on.
    3.) Then Press ENTER again, it will open the debugger screen, in the variable change the SY_UCOMM field to 'WB_DISP_EDIT_TOGGLE' . Then press F8.
    4.) your control will be in the FM 'TRINT_CHECK_REQUEST_CHANGEABLE' line number 111. Try to skip this IF condition by using debug technique.
    5,) Now you can change the description.Now you cant save this as Save button is disabled.Just press back button, you will get the message for save the changes.Just save it. Done.
    Thanks and Regards,
    Senthil Kumar Anantham.

  • Posting Key Field Status changes - unable to generate Transport request

    Dear All,
    I did posting key field status change from suppress to optional ( P.Key 24).
    However I am unable to generate a transport request.
    Please share your inputs
    Thanks
    Sanjai 

    Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
    Regards
    Abhay

  • While doing changes in GRR2 no transport request is generated( report paint

    Hi Gurus,
            when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
                  Trial balance......... liabilities          from               to
                                                                 100000           199999 (allready existing)
                                                                  600000           690000 (new range while doing this,not generated transport request)
    please do needful,
    Regards,
    Rmesh.

    Hi,
    Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
    Regards,
    Eli

  • How to change Client of a Transport Request?

    Hi friends,
    I am trying to Change the clien of a Transport Request in se01 but the field is disabled.. Is there any way to change the Client of a Transport Request?
    Pls Help me.
    Regards
    Venkatesh.S

    Why you want to change the client ?
    I assume, you are not talking about changing the traget system client but the client of the source system TR  ie for ex 100 or 120.
    If the Development Server has two clients say 100 (Configuration) and 120 (Development and Unit Test) then for configuration changes Functionals will get the TR created in 100 where as we developers get the TR created in 120.
    For Development,if you get a workbench TR in 100 client but trying to change the program in 120,then while saving the changes in the TR it will not let you save your changes because the TR is created in 100 but you are trying to use that TR to capture the changes that you are doing in 120.
    To my knowledge we can't get THIS client changed,instead we need to get a new TR in the client say 120 where the workbench changes are supposed to be done.
    K,Kiran

  • Undo changes included in a transport request

    Hello,
    I made the changes in DEV system and included those changes in a transport request. I didn't released this transport. Then I realized that those changes must be reverted. What should I do now? How can I undo those changes? Thanks

    Revert back your changes you had done if required.
    Then SE09 --> Display your request No.
    Expand your main Request Folder --> Below your main Request No you can see Child Request No. Double click on Child Request No. Click on Change Mode or press Ctrl+F1 . Then under Object Tab you can see objects.
    Select Those objects and click on Delete Row which is be a second button having RED marked minus symbol.  It will give message like object is locked press ok. Automaticaly object will be removed from request. Do same procedure for all oject one by one.
    Regards,
    Sushant

  • Change object from one transport request to another

    Hi,
    I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
    one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
    contains some inactive object. I have also tried to delete that object from this transport request and put in another one
    but when i tried to do that i was only allowing me to create sub task within the same request .
    Kindly suggest me
    Thanks
    Parag

    Hi,
    you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
    Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
    In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
    Rgds.
    Roman

  • Download a smartform on local disk based on transport request

    Dear Experts,
            I want to given on selection screen  transport request and path .If in this tranport request there is any      
           smartform ,all download on  local disk.
    So what sud i have to do for this.Please give me a example for it.
    Thanks,
    Jatin sangal

    HI,
    Use this below function module to get the spool to an internal table.
      CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = l_spool_id
           IMPORTING
                pdf_bytecount            = g_bin_filesize
           TABLES
                pdf                      = ipdf
           EXCEPTIONS
                err_no_otf_spooljob      = 1.
    The data will be fetched to IPDF internal table, then u can use GUI_DOWNLOAD function module to download this file to your specific location as below.
      CALL FUNCTION 'GUI_DOWNLOAD'
           EXPORTING
                bin_filesize            = g_bin_filesize
                filename                = g_file
                filetype                = 'BIN'
           IMPORTING
                filelength              = g_file_size
           TABLES
                data_tab                = ipdf
           EXCEPTIONS
                file_write_error        = 1.
    Thanks,
    Ravi

  • Download ABAP OBJECT(Smartform) based on Transport Request

    Dear Expert,
         I want to create a report on which there r two input fields on selection screen.First is transport request and second is Path of local disk on which i want to save .Now under this transport request all samrtforms which i have been made.I want to save a on given path in XML file(all settings at all).
    Please give me example for that.
    Thanks & Regard,
    Jatin Sangal

    Hi,
    Check this:
    http://it.toolbox.com/wiki/index.php/Upload/download_SAP_transport_request
    Points apreciated

  • CHaRM-Is that possible to create multiple Transport Request in UC

    HI Gurus,
    Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
    For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
    Schedule Manager: Monitor
    Job Status: Processing completed, but with warnings
    Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
    Action to be checked: Ur.gent Correction: Create Transport Request
    There is already an open request, XXXXXXXXXX, for this project
    So only way I can do that I released the TR and able to create another TR.
    May be wondering why I need to create another TR, why not create TASK and work on that.
    But this is the requirement at our company.
    I will appreciate the effort and time to provide me the solution of this.
    Thanks
    Ava

    Hi Ragu,
    That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
    I navigate to Actions - Depending on Status, found the entry as
    Trans. Type     StatProf         UserStatus     Seq     Action in SAP Change Manager
    SDHF             SDHFHEAD   E0002            10       CREATE_HF
    SDHF             SDHFHEAD   E0002            20       CREATE_REQ
    SDHF             SDHFHEAD   E0002            30       SAVE_PARTNER
    SDHF             SDHFHEAD   E0002            40       SET BO LINKS
    Where SDHF - Ur.gent Correction
               E0002 - In Development
               CREATE_HF -        Create an Instance in SAP Change Manager
               CREATE_REQ -     Create Transport Request with Task
               SAVE_PARTNER - Save Partners in Respective Partner Roles
               SET BO LINKS -     Sets Links to Business Objects
    I don't see any OPEN_TR.
    Any other place need to make change.
    Thanks
    Ava

  • How to find changes through transport request

    Hi all,
    I want to know whcih table and has been changed for that perticular transport request.
    Regards,
    Ramprasad

    Hi,
    Go to se09/se01. Open the request and check the objects under that TR.
    If u want to know the exact changes then u can do a remote comparision between development and test system for each object underthat TR.
    Thanks,
    vinod.

Maybe you are looking for