CharM Tcode /TMWFLOW/PROJ

Hello!
I have following questions regarding CharM functionality:
Tcode /TMWFLOW/PROJ --> Scheduling --> push "Advance"
or tcode SCMA
I am getting the error "There is no task list for this project"
Question: How can task list be created?
Tcode /TMWFLOW/PROJ --> Project Structure
CTS project --> status in task list LOCKED
Question: How to unlock the project?
Tcode /TMWFLOW/PROJ --> System change options
Cross Sys. Obj. Lock -- inacative
By doblecklicking is it unfortunately not possible to activate this function
Question: how to fix this error?
Tcode /TMWFLOW/PROJ --> CTC Status Switches
Warning: The Solution Manager project does not have an active CTS project yet
Question: how to fix this error/warning?
The Solution Manager project does not have an active CTS project yet
Thank you very much!
regards
Thom

Hi,
1.Creation of Task list:
Go to tcode solar_project_admin->system landscape tab->change management tab->create maintenance cycle which will create a task list/maintenance cycle.
2.Before creating the task list go to img project tab,create a project in the development system.
Once the project is properly cretated and task list is created,other errors will be resolved.
Check and Revert back for clarifications.
Regards,
Avinash

Similar Messages

ChaRM: Schedule /TMWFLOW/SCMA_TRORDER_IMPORT/000 hourly

Hi!
Does the task "Import transport request (background)" in task plan of CharM import all the released transports from normal corrections and urgent corrections?
Are there some possibility to plan them hourly or more then daily?
If Yes, how?
Thank you very much!
Thom

Hi Thom,
you can schedule it hourly as following:
GoTo Task plan an execute Import.
Then insert a time e.g.: 08:00 and daily. Afterwards schedule the job.
Then execute again the Import and insert as time 09:00. Schedule the job.
and so on...
This should help to solve your problem!?

Not able to create conditional required fields at Tcode CJ20N Proj Systems

Hello experts,
I have a requirement to create a few custom fields under custom enhancement tab in CJ20N transaction, and depending on a particular value for one of the fields, another set of fields need to be set to required. (If FIELD1 = 'Y', FIELD2 & FIELD3 should be set to required)
My approaches..
1. Assign a screen group to FIELD2 and FIELD3. If FIELD1 = 'Y' then LOOP AT SCREEN, and set screen-required = 1 for that specific screen group.
Problem with this approach is that, if I select FIELD1 = 'Y' (hit space or enter -> sy-ucomm = TOGGLE), the fields are successfully set to required. However, now if at this point I go and change value for FIELD1 = 'X' (hit space or enter), FIELD2 and FIELD3 still remain set to required, and keep requesting value.
2. Do not set any fields to required. Instead set it to an information message in PAI, informing user that this field requires a value when FIELD1 = 'Y' on TOGGLE and SAVE.
Problem with this approach is that even though during TOGGLE event user is provided with an informational message, if the user directly decides to SAVE (no change for TOGGLE event), in this case the same message is displayed, and the project screen itself is closed. I do not think it would be ideal for the user to see the entire project close on SAVE everytime they miss a conditionally required field.
I am just not sure at this point how to handle this at SAVE so that I can still have the same control as I would when TOGGLE event is triggered.
Experts please help if you have come across such a situation!!! Your insight would be greatly appreciated!
Edited by: akkinair on Dec 16, 2011 1:25 AM

Please find below the response.
1. Assign a screen group to FIELD2 and FIELD3. If FIELD1 = 'Y' then LOOP AT SCREEN, and set screen-required = 1 for that specific screen group.
Problem with this approach is that, if I select FIELD1 = 'Y' (hit space or enter -> sy-ucomm = TOGGLE), the fields are successfully set to required. However, now if at this point I go and change value for FIELD1 = 'X' (hit space or enter), FIELD2 and FIELD3 still remain set to required, and keep requesting value.
--> When FIELD1 chnage used module with additon CHAIN-REQUEST and check its value if it is to be set to optional by using loop at screen and set screen-required =0.*_
2. Do not set any fields to required. Instead set it to an information message in PAI, informing user that this field requires a value when FIELD1 = 'Y' on TOGGLE and SAVE.
Problem with this approach is that even though during TOGGLE event user is provided with an informational message, if the user directly decides to SAVE (no change for TOGGLE event), in this case the same message is displayed, and the project screen itself is closed. I do not think it would be ideal for the user to see the entire project close on SAVE everytime they miss a conditionally required field.
--> Can you please clarify it.
Thanks
Nabehet

Low SP level in backend,CHARM system is on SP18,no transports /TMWFLOW/REPO

Hello All ,
Currently we are in process of Applying SP18 in SAP Solution Manager 4.0. Our APO is connected to solution manager ( CHARM ) for transports related activities. However APO's has SP14
So when i try to trace APO transports in CHARM system in tcode : /TMWFLOW/REPORTING , i am not able to trace them becuase of low level SP in APO.
Is there any way out where in i should not update the SP level in APO , but apply some notes or patches
in APO or solution manager to manage the tracing of transports in solution manager.
Thanks in advance.

Hello Timo
Did you find any error in the JSPM logs? If you faced no errors, then SAP note 910073 my help to synch the versions. Please check in the "information system" page if the old versions are still listed.
Regards,
Désiré

Link between Charm & BC sets

1. I have CHARM activated for my Solman implementation project
2. I have completed my BPR structure & in Solar02 I would like to
Configure in the IMG & save the customising to BC set
3. I get a message that I should use CHARM for customising
I would like to use BC sets to store all my customising, but I cannot
find the link between Change document, BC set & BPR step.

I agree on this one.
However, a naming convention for OSS notes and FRICE is implemented over here.
That's why it would be useful to have an additional column.
The link is somewhere in SAP, because when you go to the tab Project Structure in TA /TMWFLOW/PROJ for the selected Maintenance Cycle, you see which Transport Requests are assigned to which ChaRM msg.
Roel

ChaRM: link between ChaRM message and Transport Request

We use the action 'Release Transport Requests' in the task list of the
Maintenance Cycle to release all assigned Transport Requests. In the
pop-up window that appears we see all Transport Request numbers and the
transport description.
Is there a possibility to add an extra column in this pop-up screen, to
see the link between the Correction number and the Transport Request?

I agree on this one.
However, a naming convention for OSS notes and FRICE is implemented over here.
That's why it would be useful to have an additional column.
The link is somewhere in SAP, because when you go to the tab Project Structure in TA /TMWFLOW/PROJ for the selected Maintenance Cycle, you see which Transport Requests are assigned to which ChaRM msg.
Roel

Distribution Routes in CHaRM

Hi CHaRM Gurus,
I was comparing SolMan 3.2 and Solman 7.0 and wondering what's the equal transaction code or screen was in /tmwflow/cmsconf "Distribution Routes" & Data Collector in "General Settings" in Solution Manager 3.2 to Solution Manager 7.0.
I mean I am using Solution Manager 7.0 and /tmwflow/cmsconf I do not see tab General Settings where can schedule the data collector from Satellite system, tab Distribution Routes where can perform Synchronize single project or all project etc..
I will appreciate your help.
Thanks in Advance
Krish

You need to use: /TMWFLOW/MAINTINST of /TMWFLOW/PROJ or /TMWFLOW/TRMO
Regards,
Sanjai

[ChaRM] What happens to CTS status switch if SolMan fails?

Dear Gurus
We use ChaRM functionality for ERP system. We set "Request can not be created" and "Request can not be released" by CTS stutus switch. (T-cd: /TMWFLOW/PROJ )
I wonder what happens if SolMan server goes wrong and becomes unavailable. Does anybody know?
Which one is true?
1. CTS status switch is automatically turned off and request can be freely created and released in satellite ERP Dev system.
2. CTS status switch remains even though SolMan server is down. Administrator need to turn off status switch in sattellite ERP Dev system? (What is the T-cd for this?)
Thank you!!!

Within dev system, if you use SPRO_ADMIN, you should see a list of IMG-procets.
Double click on the one you care about.
Within tab Transp. Requests, the current client's CTS settings are listed (button CTS project status switch).
Regards,
Jan

Partner display for SERVICE TEAM in report /TMWFLOW/REP_REPORTING

Hi all I've the following question about report
/TMWFLOW/REP_REPORTING
For the Partner det. procedure which I'm using, I set 3 possible types of partner for function type 0016 (service Team)
and exactely Developer Tester and IT Operator.
When i'm calling the report /TMWFLOW/REP_REPORTING I've the following behaviour :
If for a document I've mantained olny Developer, this value is displayer
If I've mantained Developer and tester in my business transaction, the tester partner is displayed.
How can I display always the Developer, which is the most important value? (ok, better both, but I prefer the developer)
I'm working on Solution Manager 7.00
ST compoent rel 400, level 23
Thanks a lot,
Fabrizio Raffa

Hi Fabrizio,
You've mentioned that you are using ChaRM Reporting /TMWFLOW/REP_REPORTING.
Actually, for this topic, the "New ChaRM Reporting" /TMWFLOW/REPORTINGN was provided as an advanced tool to replace the old reporting tool. There are a lot of enhancements in this new functionality and we recommend you to adopt it and do not use the old reporting any longer.
Best Regards
Fernando

Charm Reporting issue

Hi Friends
When I try to schedule the ChaRM reporting (in dswp -> solution reporting -> Change management). I am getting the below error. we are in sps 23.
Job started
Step 001 started (program /TMWFLOW/REP_CHANGE_MANAGER, variant REP_VARIANT, user ID SEZVEJA)
This transac. is obsolete; Pl use new ChaRM reporting /tmwflow/reportingn
This transac. is obsolete; Pl use new ChaRM reporting /tmwflow/reportingn
No data found for the specified selection criteria
Job finished
Job started
Step 001 started (program /TMWFLOW/REP_REPORTING, variant REP_VARIENT, user ID SEZVEJA)
No normal data, but there are some exception data
No data found for the specified selection criteria
Job finished
Please help me to resolve the issue
Thanks & Regards
venkat

Hi Dolores Correa
Thanks for your reply..
When I click on the speicified link page... I am getting the below error message...
We Are Unable to Locate the Blog Page You Requested.
Thank you for your interest in the SAP Community Network blogs. You may have reached this page as a result of a typing error -- please check and retype the URL. If the URL is correct, it is likely that the blog that you requested has been updated or moved -- or doesn't exist. We apologize for the inconvenience.
If you need help finding information about our community contents, please contact [email protected]
Thanks & Regards
Venkat

ChaRM error while creating tasklist

Hello everyone,
We are facing an issue with creating implementation projects and task lists.
After defining logical components and creating IMG, we have activated ChaRM, but when clicking on "Create tasklist" button, we have this following error :
Open transport request xxxxxx in system <SID> is not managed by chaRM.
/TMWFLOW/MISC202
The transport request does exists in SE10 of the satellite system.
Furthermore, the background job for generating the IMG project has been created in the satellite system and not in SolMan. Weird isn't it ??
Have anyone ever had this kind of issue ? Have we missed some configuration ?
Please help us, many thanks to you.
Regards.

Hi,
I have not seen this and I could not recreate the problem. What release of SolMan are you using?
When you create the IMG project from SolMan the IMG Project is actually created in the managed system, and therefore the background job is actually run in the managed system. This is correct.
Regards,
Rich Labib

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

CTS project and related transport request

When I create a new Project, I create also the CTS project in the development system. When the CTS project is created, also a related transport request is created. When I try to close the task list related to the project, it try to close the CTS project but I does not manage to release that transport request. How can i release the transport request related to the CTS project?
Thanks
Antonello

Hey Antonello,
The release of Transport Request is controlled by something called as "Project status switches".
Go to \n\tmwflow\proj tcode.
Go to the Tab " Project Status Switches", ensure that you select the Relevant\Correct Maintainance Proj..
When In the Project Status switch , there is something called " Transport Request can be released ", Transport request can be Imported " and so on.
Please click on Chaange on " Transport Request can be released", now TR can be released directly in R\3 without using Solman's CHARM.
Please reward if this post was usefull.
Revert For any Clarifications.
Regards,
Suzanne.
Message was edited by:
Suzzanne Dsouza

CTS Project in System Landscape

Hi,
for chaRM,i want to clarrify about CTS project creation.
1. Whether CTS & IMG Project Should Exist in all satellite system ?
2. How to create a IMG & CTS Project.? In tx Solar_project_admin we can able to create the IMG project for all roles (DEV,QT,PRD)in the Satellite system .
or else should we create the IMG project in only developement and rest of the satellite system can be transport the request ???

In Solar_Project_Admin you can create an IMG Project on the development system for the Maintenance Project. You can assign an existing project, but the Create button under the IMG Projects tab will create on for you.
I believe the CTS project will be automatically created when you activate the Maintenance Cycle for the Maintenance Project.
You can use the /TMWFLOW/PROJ transaction under the Project Structure tab to see the IMG and CTS Projects for you Maintenance Project.

No CTS projects found for "project TEST"

Hi Experts, I´m configuring the Change Request Managment for Solman 7.0 SP16, but when I execute the check report (/tmwflow/charmchk) appear the following issues:
Check consistency of "project TEST"
    --> No CTS projects found for "project TEST"
When I execute de logistic report (/tmwflow/proj) I view that:
- the "Project Structure" status is green and I can view that the Cycle is active and CTS Project is assigned.
- The "CTS Status Switches" status is green and I can view the status of my project TEST.
When I create the IMG Project, the logistic report was in red, but applied the notes:
      1158885 Maintenance cycle/project cycle cannot be completed
      1163568 No completion of task list; CTS project active
And the status was changed to green, but the charm check said No CTS projects found for "project TEST"
Any idea to solve that?
Regards,
Sergio.

Hi,
933705 - Closing inconsistent project cycles
This note will help you to delete inconsistent cycle.
Hope it helps you to solve your problem
Note this note is release independent
Regards
Prakhar
Edited by: Prakhar Saxena on Mar 2, 2009 12:08 PM

CharM Tcode /TMWFLOW/PROJ

Similar Messages

Maybe you are looking for