ChaRM Transaction Data Log Not Updating in 7.1

Upgraded to 7.1 and still using 7.0 CRM_DNO_MONITOR and CRMD_ORDER to completed change requests in flight in existing projects. The Transaction Data tab's Object and the Fast Entry tab's Overview show entries for action taken prior to upgrade. However there are no new entries for actions used or transports created after we started using 7.1. Is this still supported? Where can I see updates the the CR/CD for audit and reference purposes?

It depends a bit on your final intention. Bascially you have a shared state that you want to access asynchronously from different places. If you know that the actual object is only created once (terminilogie here is a bit shaky as every wire split would create a copy of the LVOOP object but I hope you know what I mean), you could use a global or Action Engine to store the state. Using a DVR for this state and adding the DVR to your object class data is however a more scalable approach as it will allow you to instantiate more than one object of that class and each one will contain its own DVR that will reference the same value for the specific object instance even if you split the object wire, creating actually two copies of that object (but for the purpose of this discussion they would be still the same object instance).
Queues could work if you create a single element queue but you would always need to use Preview Queue rather than Dequeue in order to maintain the value in there.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Data is not updating in DB Table

Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.

Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

System status NTUP (Dates are not updated)

Hi Guys,
WBS Element has the system status NTUP (Dates are not updated) the option to untick this is greyed out and it is preventing the posting of a journal.
Could you please let me know how to remove this system status.
Regards,
Abdul Rehman

Hi Amit,
Thanks for your reply,
WBS is released and there is no user status as well but besides NTUP another system status is there i.e ACPT(Order accepted) is this is causing any problem for genral postings?
Could you please also let me know how status NTUP got activated when i am checking in the change log it is not showing any name.
WBS is very much an account assignment element.
Regards,
Abdul Rehman.

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Last stock update Date Tab not updating in ICH

Hi Team
I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
Only this Last stock update tab Date are not updating.
What is the reason behind this?
Could you please help me to resolve this?
Regards
Virendra Kumar
09769396038

Hi Virendra
It is a bug, please report to SAP and get fix
which version you are using and what is the patch level?
1341691 should be helpful check out
Best Regards
Vinod

Why APO transaction data is not stored in tables

Hi All,
Why APO transaction data is not stored in tables.
can u explain me.
Babu

Good question Babu,
There indeed are tables for master data in APO database whereas the transaction data (qty, amount, dates and document numbers) are stored in a denormalized data base called livecache. But the master data too is identified with GUID's.. a cryptic and unique number given to e.g. a location, prodcuct, t/lane, customer and documents. This is because of speed of access if e.g. an external system is to fetch an information from APO using a unique session ID, instead of making a sequential read in APO tables, it read the live cache by called the GUID's that the calling characterics of the event. If one or more ECC system or an external execution system is connected to APO and one of the system collapses and rebuild again or if a system is assigned to a new business system group etc.. then its likely that systems can be out of sync and its where the live cache syncs up the data with APO tables again. If you still want to see tables in human readable format.. there are views available e..g the tables for locations LOCID and table for products MATLOC would take only GUID as inputs but the view V_MATLOC will show you the materials and locations by the numbers you know.
Hope I was able to explain. But yes the why part is still something of a mystery to me.. becasue with transparent tables it is easier to create local reports in APO and thats what probably SAP doesnt want. SAP can answer best as to what were the initial user and commercial considerations when developing APO
Regards,
Loknath

Time/date will not update

After updating software, the time/date will not update. My network is fine and I can get to the internet fine. Also will not accept my apple ID

Try restarting the Apple TV by removing ALL the cables for 30 seconds.

Statistical delivery date is not updating automatically or by default

When creating the PO delivery date of a item in PO,is picking,but statistical delivery date is not updating automatically or by default. I am not getting this automatically .Its need for vendor evaluation.

Hi,
Check on it:-
Statistical Delivery date vs Confirmed Delivery date
pherasath

Has anybody noticed that Last played dates do not update?

I have recently noticed that the playcounts and last played dates are not updating. When you play a song it does not update the last played date.
Did anyone come across with this issue

Yep, same for me. When i play on my iPhone, it doesn't update in iTunes using iTunes Match.

Recordmode data are not updated correctly

We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
Best regards
Theodoros

Hi again,
the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
Thanks anyway
Theodoros

BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

WSA Webroot Malware Category DAT files Not Updating

I have two wsa's that have not updated their webroot dat files since may 16th. I have tried a manual update and it still has not updated. I am not sure if any new updates have been released and availalbe. Is there a way I can verify what the most recent dat files are??

Did you ever resolve this issue. I have the webroot failing to update aswell. Will log a TAC case, but checking to see if you have had any progress?
Ben

ChaRM Transaction Data Log Not Updating in 7.1

Similar Messages

Maybe you are looking for