Check BPM

Hey guys
i m doin a file to RFC scenario using BPM and getting some error in containers(return code 99 in SXI_CACHE),is it possible to check the BPM for any errors,i know i can check for syntax but i want to test BPM on the whole
i m using SP9.
thanx
ahmad

1) some times generated work flow can have syntax errors. please do workflow syntax check using transaction swdd----> WorkFlow -
> Check Syntax
2) click on repeat activation from SXI_CACHE to get the updated version of runtime workflow
3) turn on trace for BPM using transaction code, SWELS
4) run the interface again, and check in SXMB_MONI_BPE

Similar Messages

How to Check BPM success or fail in SXMB_MONI_BPE ?

Hi Experts
      Help me...and i am new to BPM
      I have done a simple BPM scenario and i am not sure it is working fine or not
     So I open TS code : SXMB_MONI_BPE and here how to check the BPM
     Working find or not ? if success means what is the response number?
     Failure means what is the response number ?
     Can any one explain me in detail....step by step of Monitoring of BPM?
Adv thanks and Points
Prasad K

Hi Prasad,
Two ways you can check your BPM has successfull or not.
1. Go to SXI_CACHE , Double click on Integration Process Check the Return Code has 0. If return code Non-zero, select the Integration Process and activate now it will come to the Return Code is '2' again activate and you will get Return Code as '0'.
2. Go to SXMB_MONI or SXI_MONITOR or SXMB_ADMIN
Execute the XML message, find out your message and that message has 'PE' that means that is a BPM message.
Click on PE you will see how BPM steps worked in your scenario where it failed exactly.
select the particular step and In Application toolbar there is ICON called 'Technical overview' click the buttion it shows the everything.
Regards,
Venu.

BPM: Permanent error in BPE inbound processing

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Kiran.

My undertsanding is no work is being generated at all .
If you are getting the error for Source ---> BPM flow then there is a possibility that the ID objects (RD, Interface determination) are to be blamed.
1) Recreate these particular ID objects/ make some dummy changes
2) Activate and ensure that Cache is refreshed
3) Delete the entry in the queue (or delete the queue)....do this only if the XI system is not of Quality, production
4) some times the BPM cannot be triggered from sending a test message from RWB .... so make a testing from the source application .... this particular case has heppened to me and hence suggesting to you.
Regards,
Abhishek.

BPM processing error

Hi
I did a N;1 scenario with BPM. It's a three file to file scenario. The status in SXMB_MONI is fine and no errors. The com channels are all green and activated. However, target directory is not created. How do I figure out where error has happened ?
I have used merge. Where can I check whether the files have merged successfully ? The out put doesn't have fields from all files. I want to check BPM and am not able to do it.
Any inputs ?
Regards

Hi
How do I figure out where error has happened ?
Do you see any entry in MONI, if yes then scroll the message to right and see if you see a Green or Red flag under outbound coloumn. Click on PE and check if you have any queue problem
or you can open the SXMB_MONI_BPE, give the current date range and execute .. you will be able to see the error and related information.click on the error and you can find an icon for graphic and log . see the flow in which step error is occuring.
Make sure your configuration is done properly do a syntax check.
Please let us know if your BPM is getting initiated or failing in the first receive step itself.
Regards,
Srinivas

Trouble using BPM

Hi everybody,
I configured my scenario like this:
System A (File Sender) > BPM = first Receiver Determination
BPM > System B (File Sender) = second Receiver Determination
Interface Determination, Sender and Receiver Agreement were done as well.
When I triggered the process and checked in SXMB_MONI, only the first part of the process is done (processed successfully). It seems that the IS is not finding the second part and it is stopping in there.
Could someone help me?
Thanks in advance
Leo

Hi,
In addition to otehr points discussed-
1) Change the BPM and activate it . Brfore this check for the syntax error
2) Check the configuration in the IntegratioN Directory.. Check the Receiver Determination between Sender Business Service and Receiver Business Service. In this case, Receiver Service should be BPM. Also check BPM to File Target.
Because I think,as per your comments, BPM is not triggered...
3) Go to SXI_CACHE and check the status of the BPM. Does return value is 0 ? if not activate this
This blog may give some hints-
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
Regards,
Moorthy

Synchronous and asynchronous bridges in bpm

hi
please tell me any one in whitch situation we r using synchronous and asynchronous communiction?
please give me some example.
thank u
Swari

Hi Swari
Already VJ has explained you
Example
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
To check other patterns in BPM Check
BPM with Patterns explained Part-1
BPM with Patterns explained Part-2
Thanks
Gaurav

Guarantee EOIO Processing in File-RFC-RFC-IDoc Scenario

Looking for some opinions on the following set up we've got. We're trying to build QoS EOIO on a scenario that goes File Sender->RFC and then RFC->IDoc. My question is basically have we effectively ensured that our scenario will be EOIO from file to IDoc. We want the first record in the file to always be the first created IDoc, the 10th record in the file to always be the 10th IDoc created etc..... We also want to make sure that if we encounter an error at any point that all subsequent processing stops and waits until the problem is resolved. We've successfully completed some steps but my biggest concern is in the area between where XI sends the data to SAP1 via RFC and the resulting return RFC from SAP1. I'm thinking we may not be quite there yet and would be interested to hear what others thought.
We're on SP15. The scenario goes like this (no BPM):
1) We have a legacy system LEG1 that we pick files up from using the Sender File adapter. This step will take the file from LEG1 into XI and map it to an SAP remote function on SAP system SAP1. We set QoS on the file adapter to EOIO. Our interface determination for the File to RFC component is set to QoS of "Maintain Order at Runtime".
2) XI makes the RFC call to SAP1 (6.20) using an RFC receiver adapter. The called function then processes the data and returns the data back to XI using another remote function call. This function call is of type tRFC where we call the function "in background task" and issue a commit after the RFC call.
3) We receive the data into XI from SAP1 using the RFC sender adapter. XI maps it to our IDoc layout and sends it onto another SAP system called SAP2. Again here our interface determination QoS is set to "Maintain Order at Runtime".
4) XI passes the IDoc onto SAP2 (7.00) using a receiver IDoc adapter. The paramter Queue Processing is turned on.

About EOIO in qRFCs, actually this is quite a polemic topic.
There is something you could do, allright, but it is controversial whether you could properly call it "EOIO" or not.
Refer to this thread for further discussion: use EOIO on Sender RFC and outbound ABAP proxy calls
Supposing you call the other RFC before you commit work in the receiver RFC, and supposing you could have EOIO at 2nd RFC (sender RFC), all these assumptions could mean that you would guarantee EOIO end-to-end. But they are just assumptions.
You have to try it and stress test the scenario to guarantee the validity of this design.
One other approach would be a BPM with all steps in one single transaction (check BPM transaction handling). The steps would be:
File -> sync RFC -> Idoc
where the response of RFC should be the necessary information for triggering the IDoc, and all send steps would be in EOIO mode (set queue name in Send steps). Also, file sender adapter QoS should be set to EOIO.
But I'm also not sure that this will guarantee EOIO end-to-end (possibly not...)
Good luck.
Regards,
Henrique.

No mapping property with name sap.bc.bmt.wfm.xi.interface.synch

Hi All,
I configured Sync/Async BPM scenario, but message is failing at "Call Adapteru201D while calling BPM.
Below is the PI trace :
<Trace level="1" type="B" name="SA_COMM">
<Trace level="1" type="T">Start Sync/Async Communication</Trace>
<Trace level="1" type="Timestamp">2009-11-10T17:57:36Z CET Starting Processing</Trace>
<Trace level="1" type="T">Pipeline Timeout: 10.11.2009 18:58:37 CET</Trace>
<Trace level="3" type="T">Calling BPE Adapter</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="3" type="T">Processing mode is</Trace>
<Trace level="1" type="T">No mapping property with name sap.bc.bmt.wfm.xi.interface.synch.http://***/OrdereateRequestConfirmation_Out</Trace>
<Trace level="1" type="T">OrdereateRequestConfirmation_Out really used in process?</Trace>
</Trace>
And the error message that I am getting is :
<SAP:AdditionalText />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
BPM start receive step has below properties:
Mode :Sync/async Bridge
Synchronous Interface: Synchronous interface of abstract type.
Message: Asynchronous abstract message, which had the same request message as out bound synchronous interface.
Additionally I checked BPM cache , which is fine with out error.
Please suggest.
Regards,
Venkat Tirumalasetti

Goutam,
MI_RecipeDownload_Abstract is my first recv step in BPM
It is also the recv interface for RFC sneder
>> for rec interface for RFC sender it should be with out abstract. only steps inside BPM must be abstract.
Regards
Sreeram.G.Reddy

Permanent error in BPE inbound processing error

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Seshagiri.

Hi Praveen,
If the BPM goes in error due to "The incoming payload structure is incorrect (not matching message type structure of abstract interface)" , is there any work around?
Currently in my scenario BPM goes into error due to incorrect structure , error show up in SMQ2 . And the subsequent message also get stuck. What I have to do is to delete the queue in error and reactivate the queue manually.
Is there any way we can avoid this situation.
Thanks,
Pankaj

Deleted Files ! next to song. How can I sort ! to delete all those files?

My work computer i-tunes had 4000 songs. My work deleted about 3/4 of those songs from the company hard drive. Now most all of my songs have a ! next to it. It will take hours (that I don't have) to delete each song indiviudally or even to crtl a group and delete. Is there a sorting system that groups all the songs with a ! next to it to delete the group? Please help!

MacMuse's User Tip should provide the solution to your problem.
Below, I've taken the liberty of making a couple of minor changes in the wording that hopefully make it just a bit easier to follow:
- Select the Music entry in your iTunes Source List (the left-hand column).
- Select/highlight all the entries. Edit menu > Select All will do the trick.
- Now go to the File menu > Get Info.
- Confirm that you want to edit information for multiple items.
- Assuming that you're not using it for actual song information, enter 99 in the BPM field. Press OK.
- Wait for iTunes to retag the song files. Depending on the size of your Music Library, this may take a while.
- Once that's finished, click on the BPM column heading in the main iTunes Library display to sort your songs based on the BPM entry. If the BPM column isn't showing, go to the View menu > View Options, check BPM and press OK.
- Since iTunes wasn't able to find the files for the "dead" tracks, it couldn't retag them and they will be listed separately from the "live" (99 BPM) tracks.
- You can now click on the first of the dead tracks and Shift-click on the last of them, then right-click > Delete.
That should be it.
As MacMuse suggests, you might now want to go back and take the 99 out of the BPM field in case you ever have to do this again.

Message could not be processed error

Hello Experts, We are on PI 7.31 SP7 java only stack. Our scenario is a File to IDOC with BPM process. Here are the steps I did so far. 1. Completed the design objects 2. Completed the configuration objects 3. Developed the BPM process, build and deployed to the PI system. Now I am trying to test my scenario end to end. When I run my test, this is the error I see in the message monitor: Message could not be processed. Reason: com.sap.aii.proxy.xiruntime.core.ESPXISystemFaultException: Error encountered during processing of XI request message in inbound ESP; Hint: com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException: com.sap.SOA.wsr.030106 - No operation found using soap keys [], [MATMAS05]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingType=Soap, SEIName=MI_MATMAS05_MDMMRO_ABSTRACT_MASS, PortTypeQName={http://mdmerpinterface.oxy.com}MI_MATMAS05_MDMMRO_ABSTRACT_MASS, Galaxy_SDO=true, InterfaceMappingID=379227b6:144229469db:-7ef3, SoapVersion=SOAP11, BindingQName={http://mdmerpinterface.oxy.com}MI_MATMAS05_MDMMRO_ABSTRACT_MASSBinding}. 3/7/2014 2:03:23.805 PM Error Delivery of the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. FaultException: com.sap.aii.proxy.xiruntime.core.ESPXISystemFaultException: Error encountered during processing of XI request message in inbound ESP; Hint: com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException: com.sap.SOA.wsr.030106 - No operation found using soap keys [], [MATMAS05]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingType=Soap, SEIName=MI_MATMAS05_MDMMRO_ABSTRACT_MASS, PortTypeQName={http://mdmerpinterface.oxy.com}MI_MATMAS05_MDMMRO_ABSTRACT_MASS, Galaxy_SDO=true, InterfaceMappingID=379227b6:144229469db:-7ef3, SoapVersion=SOAP11, BindingQName={http://mdmerpinterface.oxy.com}MI_MATMAS05_MDMMRO_ABSTRACT_MASSBinding}. Any help on this is very much appreciated. Thanks MLS

hi.
check bpm process regestry.

Unable to get the graphical display of Business process in BPMon

Hi,
I am working on solution manager 7.1. I have set up a business process for monitoring in the BPMon session. But i am not getting the graphical display in the business process operations workcenter in the graphical view tab.
Can anyone tell me how can i get that.
Regards
Vishal

Hi,
Please run run report RTCCTOOL and see if any addon is not up-to-date.
Please run this repport and follow the recommendations to update those
components to the latest status.
Afterwards please also intall the latest version of following note: 1570282 - Advance Corr. BPMon ST-A/PI 01N
Finally please deactivate BPMon, regenerate and re-activate agin.
Also check BPM troubleshooting guide:
https://websmp102.sap-ag.de/~sapdownload/011000358700001186112010E/
Troubleshooting_for_BPMon.pdf
Thanks
Vikram

Deleting broken files in library

Sorry if I am doing this wrong but this is my first post here and I'm not very familiar with this forum.
ANYWAYS, I was wondering if anyone knows how/if its possible to delete all of the broken music files in my iTunes library at once, instead of deleting them all individually. I would like to know because I have MANY (I accidently deleted a music folder and erased all my music in that folder permanently) and it takes a long time to delete them individually. I have looked around and cannot seem to find that capability.
Thanks in advance!

Hi, sboyd92.
MacMuse's User Tip should provide the solution to your problem.
Below, I've taken the liberty of making a couple of minor changes in the wording that hopefully make it just a bit easier to follow:
- Select the Music entry in your iTunes Source List (the left-hand column).
- Select/highlight all the entries. Edit menu > Select All will do the trick.
- Now go to the File menu > Get Info.
- Confirm that you want to edit information for multiple items.
- Assuming that you're not using it for actual song information, enter 99 in the BPM field. Press OK.
- Wait for iTunes to retag the song files. Depending on the size of your Music Library, this may take a while.
- Once that's finished, click on the BPM column heading in the main iTunes Library display to sort your songs based on the BPM entry. If the BPM column isn't showing, go to the View menu > View Options, check BPM and press OK.
- Since iTunes wasn't able to find the files for the "dead" tracks, it couldn't retag them and they will be listed separately from the "live" (99 BPM) tracks.
- You can now click on the first of the dead tracks and Shift-click on the last of them, then right-click > Delete.
That should be it.
As MacMuse suggests, you might now want to go back and take the 99 out of the BPM field in case you ever have to do this again.

Deleting unfound files

I have a bunch of files in my iTunes library that I have deleted from my hard drive. Is there an easy way to get all of them out of my library at once so that I don't have to go through my whole library and delete them one by one?
Thanks!

MacMuse's User Tip should provide the solution to your problem.
Below, I've taken the liberty of making a couple of minor changes in the wording that hopefully make it just a bit easier to follow:
- Select the Music entry in your iTunes Source List (the left-hand column).
- Select/highlight all the entries. Edit menu > Select All will do the trick.
- Now go to the File menu > Get Info.
- Confirm that you want to edit information for multiple items.
- Assuming that you're not using it for actual song information, enter 99 in the BPM field. Press OK.
- Wait for iTunes to retag the song files. Depending on the size of your Music Library, this may take a while.
- Once that's done, click on the BPM column heading in the main iTunes Library display to sort your songs based on the BPM entry. If the BPM column isn't showing, go to the View menu > View Options, check BPM and press OK.
- Since iTunes couldn't find the dead tracks and retag them, they will be listed separately from the "live" 99 BPM tracks.
- You can now click on the first of the dead tracks and Shift-click on the last of them, right-click > Delete.
That should be it.
As MacMuse suggests, you might now want to go back and take the 99 out of the BPM field in case you ever have to do this again.

Deleting "lost" songs after transfer?

When transfering songs from an E-book I lost alot of my library (got the ! next to songs)...how do I delete goups of songs without going through the whole list? And, is there any way to automatically delete "dead"songs from library? Thanks All

... is there any way to automatically delete "dead"songs from library?
MacMuse's User Tip should provide the solution to your problem.
Below, I've taken the liberty of making a couple of minor changes in the wording that hopefully make it just a bit easier to follow:
- Select the Music entry in your iTunes Source List (the left-hand column).
- Select/highlight all the entries. Edit menu > Select All will do the trick.
- Now go to the File menu > Get Info.
- Confirm that you want to edit information for multiple items.
- Assuming that you're not using it for actual song information, enter 99 in the BPM field. Press OK.
- Wait for iTunes to retag the song files. Depending on the size of your Music Library, this may take a while.
- Once that's finished, click on the BPM column heading in the main iTunes Library display to sort your songs based on the BPM entry. If the BPM column isn't showing, go to the View menu > View Options, check BPM and press OK.
- Since iTunes wasn't able to find the files for the "dead" tracks, it couldn't retag them and they will be listed separately from the "live" (99 BPM) tracks.
- You can now click on the first of the dead tracks and Shift-click on the last of them, then right-click > Delete.
That should be it.
As MacMuse suggests, you might now want to go back and take the 99 out of the BPM field in case you ever have to do this again.

Check BPM

Similar Messages

Maybe you are looking for