Check (current) date

Hi,
I’ve got a field of the current date which can be changed into another date. The new date is been checked but only for one time and although the error message appears, the wrong date is been shown.
Can anybody help me please? I think I must write a script code there.
Wright?
Thanks in advance!
Matthias

Hi Matthias,
If you are using the 'current date' field from the custom objects, then the script is in the layout:ready event.
If you move this script to the docReady event it will fire only once and will allow the user to override the date.
Sample here: https://acrobat.com/#d=QR1y1RYatwSaQAWa4-jLlA
Good luck,
Niall

Similar Messages

  • Business rules for check current date and session user

    MDS 2012
    Hi All! How to make validation business rules:
    1.  date < GETDATE()
    2.  current session user is UserName(), where UserName() - system function like in MS Analysis Services
    from Moscow with Love

    There is no way to create this with a Business Rule, you have to write a custom workflow or SQL nightly job or something to update your fields.
    Ok people start screaming.
    "solution" if you want to call it that. USE AT YOUR OWN RISK, try in dev first :)
    1. Create an Attribute / Column in your Entity and call it Today or something.
    2. Go to Business Rules and create a dummy rule where you are setting this attribute (unconditionally with no Condition)
         Today equals 1/1/2000 or something.
    3. Go to tblBRItem find this BR and etin ItemSQL  from N'1/1/2000' to GETDATE()
    now you have Todays Date field...
    OK NEVER MIND, I've tried it and it works, the problem is that tblBRItems gets updated via a stored proc and will overwrite your entry.
    One can modify the code there as well but I don't have time to play with it unfortunately, as at that time you have to pass some token in to identify some values as your own special commands ... Either way this becomes messy and not a way to go.

  • How to check  the date with current day after 5 days

    Hello,
    I need to make the visible of delete button in my struts application. I've application in which user can be deactivated. If the user is deactivated and the admin can't delete the user for the specific period of time (set in property file). while deactivating the user, system time is set. and 5 days after the system time's set, i need to make the button visible.
    This is my code.
    Calendar cal = Calendar.getInstance();
    Date deActivatedDate = null;
    deActivatedDate =new Date(userData.getDeActivatedTime().getTime());// Set it in the Calendar object
    cal.setTime(deActivatedDate);                    // Add 5 days
    cal.add(Calendar.DATE, 5);// get the current date
    Calendar currentCal = Calendar.getInstance();
    Date currentDate = new Date();
    currentCal.setTime(currentDate);// check if the de-activation time is over.
    if (cal.get(Calendar.DATE) < currentCal.get(Calendar.DATE)) {
    userData.setDeletionAllowed(true);}
    can anyone help to solve this issue?

    What's the problem with the code that you posted?

  • Check the modification date of a file and compare it to the current date

    Hey everyone,
    I'm writing a script that compares the modification date of a file to the current date, and performs actions based on whether the file was modified 7 days ago or not. I haven't been able to figure out exactly how to do this.
    I haven't been able to find much in the way of this online, and I am not that familiar with manipulating dates and whatnot. I was able to get a bit of it, posted below:
    currentDate=`date +%b-%d`
    fileDate=`ls -l ~/.backup.txt | awk '{ print $6, $7 }'`
    echo "$fileDate"
    echo "$currentDate"
    if [ "$fileDate" <= "$currentDate" ]; then
    echo "old enough to run script"
    else
    echo "not old enough yet"
    fi
    Of course, this doesn't work. Any help would be much appreciated. This is for Leopard.
    TIA,
    Andrew

    find ~/.backup.txt -mtime +7 -exec yourscript {} ;
    You may need to play with the +7 value to get the exact number of days old the file needs to be.
    The find command will accept a directory (actually it is frequently used with directories) and will find all files in that directory and any subdirectories below that match the find selection critiera.
    So you could do something like
    find ~ -mtime +7 | xargs yourscript
    or
    find ~ -mtime +7 -name "*.txt" | xargs yourscript
    and if your script does not accept multiple filenames on the command line, you can use
    find ~ -mtime +7 | xargs -n 1 yourscript
    and if your file names have spaces in them, you can use
    find ~ -mtime +7 -print0 | xargs -0 -n 1 yourscript

  • Fixed report period based on current date

    I want to create a report containing records over a fixed period without using a date parameter. As a example I would like the report to continually draw on data that is no more than say ten years from the current date.
    E.g. Current date (xx/xx/2008) to (Current date - 10 years) or xx/xx/1998 then next year the formula would automatically adjust to current date (xx/xx/2009) to (Current date - 10 years) or xx/xx/1999.
    I am only a novice when it comes to designing reports so please bear that in mind.

    Hi,
    Create a RecordSelectionFormula and subtract 10 years from the current date with the DateAdd formula.
    E.g.
    //DateAdd (intervalType, nIntervals, startDateTime)
    {Table.Date} > DateAdd ("yyyy", -10, CurrentDate)
    The DateAdd function has more interval types, so you can subtract months, days, hours as well. Check the CR help file and search for DateAdd for details.
    Cheers,
    Fritz

  • Last 6 months of data from current date

    Hi Experts,
    I have a requirement in WebI to display last 6 months of data based on current date.Actually I have a column called "Employee Contract Start date" in my report.Suppose the end user executes the report today,then he should be able to see the Employee's data whose contract started today and in the last 6months from current date.
    Also I have dimension object name "Employee Contract Start Date".
    Please be noted that I am getting the data from Bex Query and I am working on BO 4.1 version.
    I have Objects "Calender day" , "Cal.year/Month" , "Calender month" , "Employee Contract Start Date" in the BEx Query.
    Could anyone please propose me, what are the ways to meet this requirement?

    Hi Cris,
    We can get the 6 Months date in webi.
    Check the below blog , will help you.
    http://scn.sap.com/community/businessobjects-web-intelligence/blog/2014/01/21/time-variablesdimensions
    Regards,
    Javed

  • Can I make a checkbox populate the current date?

    I've been asked to make a form that has quite a few checkboxes.  These checkboxes also need to be marked with a date when checked off.
    Rather than have the person filling out the form type the date every time they check the box, they request that when the user clicks the checkbox that a current date show next to the checkbox.
    I don't know if this can be done with a current date stamp or with having a text box that populates with the current date, etc.
    The forms are also going to be used throughout multiple days, so I can't just call on a "current date" and show/hide that text box like I had originally thought to do.
    I'm also really green to scripting so any help or guidance in the right direction would be much appreciated.
    Thank you.

    The following Mouse Up script for a check box will set the associated text field to the current data when it's selected, and blank the field when not:
    // Mouse Up script for check box
    (function () {
        // Get a reference to the text field
        var f = getField("text1");
        // Set the value of the text field
        if (event.target.value !== "Off") {
            f.value = util.printd("mm/dd/yyyy", new Date());
        } else {
            f.value = "";
    Replace "text1" with the name of the associated text field.

  • How to get the default date as current date in input filed in VC

    Hi
    In my VC application i have two date fields. we are allowing the end user to select the From Data and Todate though Data pickers, But the client asking to make the today's date as default date in Todate field , rather picking up from the data picker,
    Unless the  user wants change the todate from the current date. It should display today's date as default date.
    can any body tell me how to do it.
    Regards
    Vijay

    Hi All,
    I have an issue an implementing the "Exporting the Table data to Excel."
    My VC version is 7.0
    Portal version NW 2004s.
    By refering the following link, i have implemented Export To Excell functionality in VC.
    2) Another one that's in the Visual Composer WIKI:
    https://wiki.sdn.sap.com/wiki/display/VC/Exportingdatafrom+VC
    By refering to 7th page in the document. It is explained to add the data source object from the 'info' port and add the field called 'RAPTNAME'to the DATA source object.
    But the RFC object which i added to the story board, i havent find any 'info' port in my added RFC. But still i have added the data store object and added field. then
    copied the following given formula in the document in respective formula window ,Formula showin as valid. when i click on check button.
    copied formula :
    "pcd!3aportal_content!2fcom.sap.pct!2fplatform_a
    dd_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.b
    ex?QUERY=" & STORE@REPTNAME &
    "&BI_COMMAND_1-
    BI_COMMAND_TYPE=EXPORT&BI_COMMAND
    1-EXPORTFORMAT=XLS&BI_COMMAND_1-
    null="
    i am able to run the application. After i run the application . once i click on the button 'ExportToExcel' i am getting the following error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Could not find portal application com.sap.ip.bi.service.generic.
    Exception id: 05:32_01/05/07_0001_18800950
    See the details for the exception ID in the log file
    Can u please tell me what is the problem
    Regards
    Vijay

  • Create a trigger to check inserted date is before or after SYSDATE

    Hi,
    I am trying to create a trigger that will check an inserted date against SYSDATE and alter the value (i.e. make it SYSDATE) when the entered date is incorrect.
    For example, I have a Customer table with a record named MemberDate which, when a date is entered to it, will be checked by the trigger to ensure it is not before the current date.
    My code so far;
    CREATE OR REPLACE TRIGGER Customer
    BEFORE INSERT ON
    Customer
    FOR EACH ROW
    DECLARE
    e_invaliddate_ud EXCEPTION;
    BEGIN
    IF :NEW.MemberDate < SYSDATE THEN
    RAISE e_invaliddate_ud;
    END IF;
    EXCEPTION
    WHEN e_invaliddate_ud THEN
    DBMS_OUTPUT.PUT_LINE('The date entered for MemberDate is invalid. The
    MemberDate has been set to the current date');
    END;
    So far, this trigger only returns an error message but allows the date to be entered even if it is incorrect. I have tried a few ways of altering the entered date to SYSDATE but to no avail.
    I am running scripts using SQL PLUS and inserting data using
    INSERT INTO Customer
    VALUES(CustomerID, ..., MemberDate);
    Where the values entered will be checked to ensure the MemberDate is not before SYSDATE.
    The MemberDate data-type is DATE and has a rule that it must not be before the current date. I am aware that a constraint may not be used to perform a check using SYSDATE, this is why I am trying to make a trigger.
    However, my knowledge of triggers is limited
    If anyone can help, I will be very Happy.
    Thank you in advance.

    Use this if you want an error message that halts the execution:
    create or replace trigger customer
    before insert on customer
    for each row
    begin
      if :new.memberdate < sysdate
      then
        raise_application_error(-20000,'The date entered for MemberDate is invalid.');
      end if;
    end;Use this if you want to automatically to overwrite the MemberDate with sysdate without an error message:
    create or replace trigger customer
    before insert on customer
    for each row
    begin
      :new.memberdate := greatest(sysdate,:new.memberdate);
    end;Note: untested
    Regards,
    Rob.

  • Connection failure - Itunes tells me to check my date/time. Help?

    Evening, everyone.
    I'm having some trouble connecting to Itunes. I get the following error message when i try -
    "Itunes could not connect to the music store. A secure network connection could not be established.
    Check that your computer's date and time are correct and try again."
    I duly checked the date/time and found that they were wrong, so updated them and tried again and still received the same message.
    I also tried turning off my Norton and trying to connect with it disabled, with no luck. The other things currently running are DVD43, Sonic Cineplayer and MSN messenger. I can't see why any of them would be interfering, but i'm happy to be corrected.
    I've had no luck finding answers on the Itunes support page. I'm not sure what other information i can give to help elucidate, so feel free to ask.
    Any ideas?
    Hallmark Xblade   Windows XP  

    Has anyone figured this out yet - this is the same message I get. I have the newest version of iTunes and just started using it with music I already had. First time trying to buy music, and that's what I got!!
    Please someone!!!!!!!!
    Dell XPS 400   Windows XP  

  • Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

    Hi,
    Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
    Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
    I have done some Google and found that we need to add something in Essbase.cfg file like below.
    1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
    Possible Problems
    Analytic Services could not lock enough blocks to perform the calculation.
    Possible Solutions
    Increase the number of blocks that Analytic Services can allocate for a calculation:
    Set the maximum number of blocks that Analytic Services can allocate to at least 500. 
    If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
    In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
    Stop and restart Analytic Server.
    Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
    Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting. 
    Determine the block size.
    Set the data catche size.
    Actually in our Server Config file(essbase.cfg) we dont have below data  added.
    CalcLockBlockHigh 2000
    CalcLockBlockDefault 200
    CalcLockBlocklow 50
    So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work?  and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
    Regards,
    Naveen

    Your calculation needs to hold more blocks in memory than your current set up allows.
    From the docs (quoting so I don't have to write it, not to be a smarta***:
    CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
    When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
    Example
    If the essbase.cfg file contains the following settings:
    CALCLOCKBLOCKHIGH 500  CALCLOCKBLOCKDEFAULT 200  CALCLOCKBLOCKLOW 50 
    then you can use the following SET LOCKBLOCK setting commands in a calculation script:
    SET LOCKBLOCK HIGH; 
    means that Essbase can fix up to 500 data blocks when calculating one block.
    Support doc is saying to change your config file so those settings can be made available for any calc script to use.
    On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

  • Current date parameter in concurrent program is not not taking current date

    Hi All,
    I have scheduled one concurrent request running very day @21:30 ,one of the parameter passed is current date ,which defined as default value at the time of defining concurrent program.Surprisingly its taking next day date as parameter.Can someone help me resolving this issue.
    From where this current date is taken.
    When I am logged in unix as oracle user and executing following query I am getting follwoing results
    SQL> alter session set nls_date_format='MM/DD/YYYY HH24:MI:SS';
    Session altered.
    SQL> select current_date from dual;
    CURRENT_DATE
    05/25/2010 07:40:11
    SQL> select sysdate from dual;
    SYSDATE
    05/25/2010 07:40:20
    date
    Tue May 25 07:40:35 SAUST 2010
    When I logged in unix as applmgr user:
    SQL> select current_date from dual;
    CURRENT_DATE
    05/25/2010 04:41:17
    SQL> select sysdate from dual;
    SYSDATE
    05/25/2010 07:41:19
    date
    Tue May 25 07:41:04 SAUST 2010
    Unix level date is correct and sysdate is also correct in both cases.
    But current_date when logged in s applmgr user is wrong,is this reason for the issue.
    If so how can I change it
    Version : 11.5.10.2
    Database : 10.2.0.4
    OS : AIX 5.3
    Thanks in advance

    Hi;
    Please check below and see its helpful:
    Scheduled Request Set Using 'Current Date' In Parameters Will Set Parameters One Day Out [ID 242654.1]
    The parameter Argument 2 (GL DATE) does not select the Current Date when schedule [ID 250431.1]
    Regard
    Helios

  • Delimited Org Unit(having end date Current date) are not coming in Bex output.

    HI All ,
    I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
    Please suggest  .
    Thanks,
    Arvind Venai

    Hi Arvind,
    As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
    Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
    There mught be some restriction in BEx Query , please check

  • A script for adding the current date to file name?

    I am working in Indesign CS3. I frequently save file as PDFs into a designated folder. I was hoping for help in writing a script that would apply the current date to the end of the file name, when saved into this folder. Some days, I save the same file several times, into this folder. I was also hoping there was a way to add a date and version, for example "filename_2.25.11(1).pdf" Is this possible? Can someone help me?

    ok, I ended up with this test routine:
    on adding folder items to this_folder after receiving added_items
    tell application "Finder"
    repeat with this in added_items
    my checkifopened(this)
    display dialog (name of this) as text
    end repeat
    end tell
    end adding folder items to
    on checkifopened(this)
    set a to POSIX path of (this as alias)
    repeat until 1 = 0
    ## don't like that one because it relies on an error msg ... so
    (** try
    set b to do shell script "lsof | grep " & quoted form of a
    on error
    exit repeat
    end try**)
    ##so I use this one
    set b to do shell script "lsof"
    if b does not contain a then
    exit repeat
    else
    say "still opened"
    end if
    end repeat
    end checkifopened
    this is a folder action that tests if the added file is still opened by an application... there is no delay between each test-loop since lsof takes some time to execute...
    And after adding a timeout (just in case) to this function the final script looks like this:
    on adding folder items to thefolder after receiving added_items
    tell application "Finder"
    set folderkind to kind of thefolder
    set myfiles to every item of thefolder whose name does not contain "#" and kind is not folderkind
    repeat with myfile in myfiles
    set myfile_datestring to my get_datestring(creation date of myfile)
    set myfilename to name of myfile
    if (count of every character of myfilename) > 4 and (character -4 of myfilename) as text is "." then
    set filestatus to my checkifopened(myfile, 60)
    if filestatus = false then
    display dialog "timeout on folder action"
    else
    set tmp to ((characters 1 through -5 of myfilename) & "#" & myfile_datestring & (characters -4 through -1 of myfilename)) as text
    set myfilename to my checknamewith_pdfsuffix(tmp, thefolder, false)
    set name of myfile to myfilename
    end if
    end if
    end repeat
    end tell
    end adding folder items to
    on get_datestring(mydate)
    return year of mydate & "-" & (characters -2 through -1 of (("0" & (month of mydate as integer)) as text)) & "-" & (characters -2 through -1 of (("0" & (day of mydate as integer)) as text)) as text
    end get_datestring
    on checknamewith_pdfsuffix(n, D, looped)
    --check if filename exists in D
    -- so if "A File.pdf" exists it names it "A File 1.pdf","A File 2.pdf",...
    #n = string of the filename
    #D = file reference to the directory to check
    #looped = boolean used for recursive loop...
    tell application "Finder"
    set thefiles to name of every item of (D as alias)
    end tell
    if thefiles contains n then
    if looped = false then
    set n to ((characters 1 through -5 of n) & "(1)" & (characters -4 through -1 of n)) as text
    my checknamewith_pdfsuffix(n, D, true)
    else
    set tmp to (last word of ((characters 1 through -5 of n) as text) as integer)
    set tmpcount to (count of characters of (tmp as text)) + 5
    set tmp to tmp + 1
    set n to ((characters 1 through (-1 * tmpcount) of n) & "(" & tmp & ")" & (characters -4 through -1 of n)) as text
    my checknamewith_pdfsuffix(n, D, true)
    end if
    else
    return n
    end if
    end checknamewith_pdfsuffix
    on checkifopened(this, mytimeout)
    ## this file reference
    ## timeout in seconds
    set a to POSIX path of (this as alias)
    set startdate to current date
    repeat until 1 = 0
    ## don't like that one because it relies on an error msg ... so
    (** try
    set b to do shell script "lsof | grep " & quoted form of a
    on error
    exit repeat
    end try**)
    ##so I use this one
    set b to do shell script "lsof"
    if b does not contain a then
    return true
    else if ((current date) - startdate) > mytimeout then
    return false
    else
    ##say "still opened"
    end if
    end repeat
    end checkifopened
    to use this save this script in /Library/Scripts/Folder Action Scripts
    and add this as a folder action to your folder...
    The script processes all files inside that folder each time a new files is added...

  • After backup Restore in 2.2 - no current Data visible!!!

    Hello! 
    I´ve spent the last few days trying to get the 2.2 up and running. After multiple re do´s I´m at a loss how to further proceed. 
    I took a backup from our existing vmbased 2.1.2 (backup ... application NCS..) and then restored it to the new 2.2 VMWARE installation. 
    the log says that everything worked:
    Started at : Tue Feb 10 16:44:34 2015
    Initiating restore.  Please wait...
      Restore Started at 02/10/15 16:44:34
      Stage 1 of 9: Transferring backup file ...
      -- completed at 02/10/15 16:45:43
      Stage 2 of 9: Decrypting backup file ...
      -- completed at  02/10/15 16:50:41
      Stage 3 of 9: Unpacking backup file ...
      -- completed at  02/10/15 16:50:48
      Stage 4 of 9: Decompressing backup ...
      -- completed at  02/10/15 16:55:17
      Stage 5 of 9: Restoring Support Files ...
      -- completed at  02/10/15 16:55:19
      Stage 6 of 9: Restoring Database Files ...
       -- completed at  02/10/15 16:56:49
      Stage 7 of 9: Recovering Database ...
      -- completed at  02/10/15 17:25:38
      Stage 8 of 9: Updating Database Schema ...
                      Stage 1 of 5: Pre Migration Schema Upgrade ...
                                            -- completed at: 2015-02-10 17:45:05.653, Time Taken : 0 hr, 14 min, 22 sec
                      Stage 2 of 5: Schema Upgrade ...
                                    : This could take long time based on the existing data size.
                                            -- completed at: 2015-02-10 17:55:02.82, Time Taken : 0 hr, 9 min, 57 sec
                      Stage 3 of 5: Post Migration Schema Upgrade ...
                                            -- completed at: 2015-02-10 18:04:55.583, Time Taken : 0 hr, 9 min, 52 sec
                      Stage 4 of 5: Enabling DB Constraints ...
                                            -- completed at: 2015-02-10 18:06:04.474, Time Taken : 0 hr, 1 min, 4 sec
                      Stage 5 of 5: Finishing Up ...
                                            -- completed at: 2015-02-10 18:06:15.352, Time Taken : 0 hr, 0 min, 10 sec
      -- completed at  02/10/15 18:06:46
      Stage 9 of 9: Re-enabling Database Settings ...
       -- completed at  02/10/15 18:06:46
       Total Restore duration is: 01h:22m:12s
    INFO: Restore completed successfully.
    Starting PI Server... This may take some time
    Starting Prime Infrastructure...
    This may take a while (10 minutes or more) ...
    Prime Infrastructure started successfully.
    Finished at : Tue Feb 10 18:30:53 2015
    then I Resynced everything, wlc config, switch config, cleared browser cache, And restarted. The good point: The data is all there! Everything! Maps, ap locations, everything! I was baffeled. I wasn´t really used for restores on NCS/Prime going so well :D Thinking all is well, I started furthur in. And noticed that every client. Every 7300 of them was disassociated. If I choose a client that I know is on the network (my laptop..) it always says disassociated, and the last time seen was the time of the backup. Ok might need a while. Let it sit over night. STILL NOTHING.. If you click on the check box to show the client details, troubleshoot or anything - you just get the spinning cursor and nothing shows up. If you go in the maps, and click on a ap, then click on the client count - spinning cursor. Everything that has to do with current data - spinning cursor. 
    Then I restarted. Fresh 2.2 installation. Added a few devices, just to see that the data collection really works. And YEAH it did! So I thought it might be a problem with maybe the devices not being in the database, jada jada jada. So I imported a 100 devices with the discovery function. Which is working really well. And THEN I restored the backup, again all successful, and all data is there. 
    and this morning - still no current data available. 
    Has anybody come across this? and how do I solve this? I will be opening a tac too, but I was hoping you guys are faster :D 
    thanks alot for your help! 

    I love to see that 2.2 has been granted mind reading abilities. After I complained here, I restarted and resynced again.. and now.. ehm. it works. No Idea what I did different this time :(( But it seems to be working now. 
    The last attempt was to add devices before the restore.. and then 3-4 resyncs, and 2 restarts.. 

Maybe you are looking for