Check Deposit List - cannot post Processing status not correct
Hi Expert,
I was trying the edit a check deposit list and I encountered error message during save.
"Cannot post. processing status not correct."
Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
How to go to statement/list processing to change to status to 3?
thank you
Hi,
Use T Code FF67,
Select the Check deposit list and click enter. Now go to Settings > Specifications
Here you will find the "Processing Status" for you to continue.
Regards
AKV
Similar Messages
-
Error:IDoc cannot be processed: Qualifier not supported.
Hi experts,
I got this error when executing the idoc
message type: dirdeb
basic type : pexr2003
error:Error during creation of internal payment order.
IDoc cannot be processed: Qualifier not supported.
Thanks
Saravanaperumal NHello,
001 Customer Purchase Order
002 Vendor Order
003 Customer Inquiry
004 Vendor Quotation
005 Customer Contract Number
006 Vendor Contract Number
007 Collective Number for Quotations
008 Last Purchase Order Number (SPEC2000 Acknowl.)
009 Invoice Number
010 Internal Number (Document)
011 Referenced Document Number
012 Delivery Note Number
013 Internal PO Number
014 Accounting Document
015 Billing Document Number of Invoicing Party
016 Number of Preceding Document
017 Assignment Number
018 Customer Order Number
019 ISR Number
020 Invoice List Number
021 ID for Cost Assignment
022 Payment Document Number
023 Banker's Acceptance
024 Matured Certificate of Deposit (CD)
025 Loan
026 Check Number
027 Foreign Exchange Contract Number
028 Credit Memo
029 Payment Advice Note Number
030 Original Purchase Order Number (ALE)
031 Return Leg Number
032 Reference Bank
033 Third-Party Reference Number
034 Reference Number of Beneficiary's Bank
035 Message Reference
036 Credit Card Number
037 Statement Number
038 Account Statement No. (Deposit No.)
039 Account Statement No. (Deposit Seq. No)
040 Payee Code
041 MICR Line
042 Imported Line
043 Vendor Contract Number
044 Ship-To Party's PO Order
045 Cost Center
046 Profitability Segment No.
047 Work Breakdown Structure Object
048 Profit Center
049 Business Area
050 Delivery Order
051 Delivery Order Route Number
052 Sequence Number
053 Scheduling Agreement Number
054 External Transaction
055 Promotion Number
056 Customer Quotation Number
057 Customer Buying Group
058 Customer Contract Number
059 Check Number from Check Register
060 JIT Call Number
061 Internal Delivery Note Number
062 Customer PO no. for consignment issue by ext. service agent
063 External Delivery Note Number
064 Goods Receipt/Issue Slip Number
065 Repetitive Wire Nummer
066 External Order Number
067 Quality Notification Number
068 External Inquiry Number
069 Business Partner Reference Key
070 Reference Text for Settled Items
071 Customer ID no.
072 Agreement Number
073 Credit Advice Number
074 Transfer Number
075 Check Number
076 Credit Posting Number
077 Transfer number (just transferred)
078 Delivering Profit Center
079 Batch Number
080 Certificate Profile
081 Collective Daily Delivery Note
082 Summarized JIT call
083 External Delivering Plant
084 Tax Number Tax Office §14
085 KANBAN ID
086 Kanban Control Cycle
087 Reference Document Number Billing Doc.
101 Resale Invoice No.
102 Resale Ship and Debit Agreement No.
103 Customer Claim Reference Number
104 Design Registration Number
105 TPOP Order Number
106 TPOP Reference Order Number
111 Partner Business Area
APY Approval Year of Official Document Numbers
APN Registration Number of Official Document Numbers
SNC Serial Number of Statement
These are all the Value range for qualifier, use which one suits your requirement
Regards,
Abhishek -
Problem - Define Forms for Check Deposit List - Need Help
Hello Experts,
I want to extend the logic of T Code FP20 (Prog RFKKCK01),
Hence, I have created a 'Z' prog with the appropriate extension in the logic.
Now to take these change effectively, i have made corrensponding changes in the attached SAP Script (FKK_CHECKDEPOS) also.
Now, when I go to
Contract Accounts Receivable and Payable -> Business Transactions -> Payments -> Processing Incoming and Outgoing Payments ->Define Forms for Check Deposit List.
In this, I create a new Entry after removing the existing Entry of the same Company Code [1000 | ZRFKKCK01 | SapScript | ZFKK_CHECKDEPOS ]
it gives me an Error "Specify the key within the work area".
Specify the key within the work area
Message no. SV033
Diagnosis
You have attempted to create an entry whose key is not in the range defined for this area.
System Response
The entry cannot be created.
Procedure
Please check your entry.
Please Help me solving this problem.
Thanks!!Thanks sbaranga. This code won't work for me.
<select>
<option value="P"if (statusIndicator.equals("Pending")){ selected}>
<option value="A"if (statusIndicator.equals("Approved")){ selected}>
</select>
In above code statusIndicator is ID I believe. I need to show selected item based on statusIndicator in database. Also it has to pass updated status to database incase if user changes status thru form.
If they select Pending then "P" will be passed to servlet and if they select Approved then it will pass "A" to servlet.
I will be receiving "A" or "P" from database when I am trying to retrive status value from database. Based on value "A" or "P" I need to change selected information on form.
Update and Retive form are same. this one form does everything display and update.
I hope this help to understand my question.
If you have any question then email me at [email protected]
Thank you. -
Report for Check deposit list being presented in Bank
Dear SAP Experts,
we are electornic manufaturing and trading company having business in all over the country. we have fourteen branches and diiferent sale outlets. Similarly we have different house banks all over the country where each branch deposit its collcetion (incoming checks)
Now we have requirements from managment that it wants to see check deposit status. All the checks from fourteen branches being deposited and how many honoured within value date and how many dishonoured
To meet this requirement i make all necessary configuration for check deposit and configured the scenario. every thing is ok and i also got print through transaction code FF68. but as i demonstrated this to my Finance department , there was requirement of report (not print format) in ALV format to get all the chkecks being presneted at specific date and honoured and dis hounred at that date
As i searched for check deposit list through SDN i found programme RFKKCK01 for this. i also made alll necessary configuariton for this report but as i executed it there is message "No payment lot corresponds to the selection criteria"
i am not finding any appropriate stuff on this issue
Requirement
Do i going on right track to meet managment requirements i.e. report showing presented, dishonoured and hounured checks for speicfic date(period)??
Procedure to create payment lot as i am not finding any such field to create payment lot(back end or front end)??
At presnet we are creating check incoming entry by debiting incoming bank a/c and crediting customer, while in case of check deposit i have to use one additional bank clearing a/c andadditional data entry through t code FF68
waiting very constructive reply as i always get from SDN
thank you
SajidaCreate a query with joined tables (KNB1, KNA1 & BSAD) will show you the posted deposits for specific date range.
Do dishonored checks get posted/updated in your system immediately? Does this information come from the bank? -
Check Deposit List Overview (FF68)
Hello all,
I have a new accounting rep who entered a manual entry into our check register with the processing type:
1 Further processing as batch input (generate online)
We normally process our manual entries with processeing type:
4 Further processing online
To resolve this issue, we entered SM35 (Batch Input: Session Overview) and deleted the batch input entry. The entry never hit the G/L, and we simply entered an additional manual entry with the correct processing type.
However, our issue is this: Even though we deleted the batch input session which contained the "mistake" entry, it still shows in our Check Deposit List Overview. We are trying to remove this from this list, and we do not know how. We do not want this extra check deposit to put our books out of balance.
Please help!
Thanks,
-MattCan anyone help? I thought my question was very clear. If anyone needs clarification, please don't hesitate to ask for additional information to help you understand the problem.
Thanks again,
-Matt -
Can we delete the Check deposit list created in ff68
I have created check deposit list in ff68 transaction code. batch session created in SM35. But i did not process the session in SM35. Can i delete the check deposit list created in ff68 from the system totally. Is there any program/ transaction code to delete that.
If that is not possible, my alternative option is setting deletion indicator.Hi,
Go to transaction FEBA_CHECK_DEPOSIT
Enter you statement details and press enter to see your statement
There would be an 8 digit ID mentioned after Ending Balance Field. Note down this ID
Go to SE38/ SA38 and program RFEBKA96 and give application area as 0002 and ID as above. Execute
Select the statement and delete it.
Regards,
Gaurav -
Problem to know details about check deposit lists for a customer(FF68)
Hi Gurus,
I have Requirement ,On Posting Date
Bank details about a customer to know check
deposit lists,All the cheque postings that are dated
for today and tomorrow are to be extracted from
back end.RFC developed should be capable of
accepting date range. Useful fields for the
SMS are Slip No, Posting date, value date,
entry date, Party code, Ref No, Amount,
Cheque No, Cheque date, Bankers Name
Could anyone help me,
how do know Bank Details for a customer check deposit listsHi Shiva,
We also have a requirement to capture all the fields mentioned below during customer incoming payments.
We also have some additional fields like state code and check deposit location code also.
Would be really helpful if i could know how you have mapped the same in FF68.
Thanks
Sembian -
How do i check the list of invoices which are not posted into sap.
Hi All,
Iam displaying(ALV) the list of invoices and epayments for both PO & non PO transactons which are being processed in workflow but not posted in sap.
(Non po transaction is th eone with out reference of a PO)
How to check and list out the invoices that are not posted in sap. where does this get stored.
please help.
Thanks
jyothi.Hello Jyothi,
U can give try with EKBE table for getting invoices for PO. In this table there is a field vgabe which has various status. U can try that. Now for Non PO, u would be directly creating invoice doucment using FB60(i guess) which would create an entry directly into BKPF/BSEG. U can scan BKPF for the date range company code document type KR which vendor invoice. -
Asset - worklist processing status not getting changed
Hi,
I created a worklist through Tcode- 'AR01' for processing mass
retirement of assets.
I executed the worklist through Tcode- 'AR31', and released the
worklist.
The status is in 'In process' is not changing even when I keep on refreshing it.
The system speed is normal.
rgdsHi,
The session is not getting displayed in 'SM12' for the basis person to break the session.
Also the worklist status shows 'IN PROCESS'
How should I delete a worklist?
rgds -
Compliance on content status not correctly updated on CAS
We have a new SCCM 2012 R2 CU1 environment with a CAS and multiple primary sites.
We noticed that the compliance percentage
for some applications are not correctly (50%) updated on the CAS for a site with a primary site server with a DP role and a site system with a DP role. It is shown correctly (100%) on the primary site server.
On the CAS you can see the message "detail will be available when server finishes processing the messages" on the content status asset details for some applications.
We have verified that these applications are distributed. The compliance percentage is corrected if we go to an application on the CAS and redistribute it. It only takes a second to finish. So it looks like a bug on the CAS.
Since we are doing our proactive checks on the CAS, it is important for us that the information is shown correctly. We have rebooted the CAS with no result. Also we have all updates installed. We have not found a solution for this yet.
Is there anyone else with this issue? What can we do to troubleshoot or fix this issue?Hi ,
As it is related to System Center 2012 Configuration Manager, you can create a new post on the configuration manager forum to ask for more information:
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
More experts will assist you, then you will get more information relation to your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Letter of credit check status not correct in VL01N
Hi, Gurus,
I activate both credit management and documentary payment. When I try to create delivery-VL01N with reference to a sales order, i assign an financial document with 100% depreciation. Suppse deliver amount exceeds this financial document, system should issue message and block this delivery. However, there were no such message and credit status is "A" when saving delivery.
In Vl02N, not changing any data, system issue the message showing that
the financial document value is exceeded, and delivery is blocked when I save the delivery.
I checked my configuration, and cannot think of anything related to this.
After debug, I found out that the reason is that SAP get delivery value from table S131, field OLIKW and compare it with financial document open value. However, S131-LOIKW is 0 when I create the delivery. After delivery is created, S131-OLIKW value is corect. Therefore, when i change delivery and try to save before exit, system will issue the message.
Does anyone know anything might be related to this weird issue?
Thanks,
CicelyHi Gopala,
The accounting document has already been released &accounting doc has been created. But the value of Financial Doc i.e Letter of Credit remains same.
Regards,
Mahendra -
PO ERROR IN PROCESS - STATUS NOT UPDATING
Please assist, PO is error in process upon push Material already in full the PR had an old PO which was deleted at the SRM yet still active at the back end we try to push the old PO but the status didnu2019t update and try to delete the PO at the back end but it wasnu2019t possible. We have also tried to change the PO status yet still remain error in process. THANKS
Hi,
Cuold you clarify error messages as displayed in BBP_PD?
Any entries in RZ20?
Thanks and Regards,
Abraham -
PR05 status not correct with FI
Hello all!
We have the following issue:
the user inserted the expense in PR05 and then he try to posted trough PRRW the expense to FI.
However the system gave an error message regarding the blocked CO periods. we´ve opened the CO periods but the user deleted the run in PRRW. Going to PR05 the status is "Transferred to FI".
We´ve went to the vendor but nothing is posted.
How can I change the status from "Transferred to FI" to another status so the expense could be posted to FI?
Regards,
AnaHi Ana
Probably report RPRTRVSW is your only option now if you cannot reject the posting run (was the posting run partially posed - ? What was the status of it in table PEVSH?), usually if the posting run is rejected, it should run this report anyway in the background and reset the trip status but it really depends on the status for the posting run in PEVSH anyway.
What EHP and SP version do you have for EA_HR, there are several notes that optimize the posting run administration so let me know on these points and I can suggest the notes.
Thanks
Sally -
Attendance list for courses, report RHXTEILA_LSO not correct.
The attendance list of courses report (RHXTEILA_LSO) is not displaying people if they were in a department/service/team that his since been delimited.
Has anyone else come across this problem?.
JasonJason,
If Org. Unit was delimited, you should see the "Org. Assignment" field blank.
Please check your filters, be carefull with dates, and also check using standard report by checking "standard selection screen" (RHTEILN0_LSO report).
Tell us the results. Regards! -
TS1717 I cannot open i-Tunes: not correctly localized!
I get this message: "This version of iTunes has not been correctly localized for this language. Please run the English version" Needless to say, I'm working in English. I have not updated my iTunes recently. And the drop box offers no way of "running the English version" Any suggestions out there?
Sorry people but I've managed to post this question twice!
I may have solved the problem by downloading the latest iTunes. Will see over the next day or so but it would have been good to understand the problem rather than just dumping it!
Thanks
Maybe you are looking for
-
PAGES FILE FROM IPAD WONT OPEN ON MAC
after page update when i try to transfer a file back to my mac, then open it I get this error message: The required index.xml file is missing.
-
Preview on a Video Monitor?
Does Encore have the ability to feed the preview monitor or timeline into an external NTSC video monitor (not unlike a non-linear editing system would)? I have a Sony LMD-2010 LCD monitor that I use with my Avid system (output through Avid Mojo) and
-
File sender - carriage return and new line as endseparator
Hi All, I'm stumbled with a problem to set carriage return and newline character as the endseparator (record delimiter) Scenario: The input file PI is receiving has got few fields which has text in it and the content in this text has got newline char
-
Yes, Finally at about 7:30PM 11/10/05 I got my VIDEO iPOD. Y AY, currently I am loading the songs/movies/pictures. I just hope I don't run into many problems. Thanks apple, but Why no fire wire use, stupid idea to use the same circuitry from the nano
-
Hello everybody. a Short question , I need help with this, I have a report based in a SQL Query (PL/SQL function body returning SQL Query) and I need to see the query returned. My question ¿How I can see the content of the query that I construct?. An