Check Table updation
Hi Folks,
Problem statement: how to update the values in look up table [imported as a checktable from R/3]. eg. values in of material group
Can an IDOC [sent, from say a prodn r/3 client] update the values ?
Regards,
Vinay
Hi Vinay,
We were in same situation as you. As we extended customer repository there were lot new fields having check tables and extract program is not capable oto dynamically extract those new fields check table entries.
For this, we end up modifying same program to extract additional check table entries and as well modified XSD for import manager to import new set of entries.
Also we scheduled this program to run every night as batch process and MDM import manager picks file and process into MDM lookup table if there are any new entries .
This is working fine for me.........
Thanks
Reddi
Similar Messages
-
How check table update program, FM etc..
Hi ,
I need to prepare a document for table the KNB5, the table contain 11 fields, need to prepare a document for all the fields how they are updating and what Programs, Fucntion Module, Module Pool/enhancement etc.. involved for table updating .
I will use where used list for each field and get list programs, Fucntion Module, Module Pool/enhancement etc. involved but in what basis, I will confirm weather this program or FM really using table updates or not.
Shall I search with update command or with table? is any other way?
Thanks in advance.
MahheThis is kind of tricky. KNB5 is customer dunning data table which (as far as i know) is updated by transaction XD01/XD02.
So, you might want to run a SQL trace and modify/update the data. Then you need to analyze the trace to see how it is being updated. Then again, you need to put break points and see what is going by running the same again.
Just an fYI..... Check out customer master XD02 and company code data - Correspondence tab for dunning info and fields.
good luck -
Inserting records into Table with check table logic in place
I want to insert records into a table, and have the check table to not allow invalid entries. Is there a function out there that will allow this? I am currently using the insert statement and it is working except that it is not giving an error when the value does not exist in the check table for the particular fields.
INSERT INTO ZSD_XREF VALUES WA_XREF.
That is the basic statement I'm using ZSD_XREF has several fields one being the material number field tied to the check table which happens to be MAKT file. The insert statement is not validating the material numbers using the check table, or at least it is not giving an error. Any ideas?Paul,
Unfortunately, open SQL statements such as INSERT, UPDATE do not go through the check table logic as they directly hit the database layer. Check table checks are performed only if you go through application layer that is when you enter the same data through a screen.
You have to do the checks yourself.
Happy checking!!!
Srinivas -
I restarted my computer but still have this issue.
I changed the setting from "install updates automatically" to "never check for updates". clicked ok and then changed back to "install updates automatically". Tried to check for updates and still receive the same error.
Windows defender was turned off. I turned it on updated it but still receive the same error message.
The background intelligent transfer service and windows update are set to "automatic delayed start" and the status for both is "started".
I'm running windows 7 home premium 64 bit
I ran the MGADIAG tool and here is the report (windows tab)
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-QCPVQ-KHRB8-RMV82
Windows Product Key Hash: +Rj3N34NLM2JqoBO/OzgzTZXgbY=
Windows Product ID: 00359-OEM-8992687-00095
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {22D605EF-8B21-4E2C-A111-AC15534A1805}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130318-1533
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
Microsoft Office Project Professional 2007 - 100 Genuine
Microsoft Office Visio Professional 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{22D605EF-8B21-4E2C-A111-AC15534A1805}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-RMV82</PKey><PID>00359-OEM-8992687-00095</PID><PIDType>2</PIDType><SID>S-1-5-21-3546321622-335202686-625851561</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 1545 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A14</Version><SMBIOSVersion
major="2" minor="4"/><Date>20091207000000.000000+000</Date></BIOS><HWID>A27B3407018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard
Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>WN09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>64BC76978749586</Val><Hash>GW6PzcEVEDTVKeO5Ym5UUm41dBk=</Hash><Pid>89388-707-0441865-65517</Pid><PidType>14</PidType></Product><Product
GUID="{90120000-003B-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Project Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89403-707-4159871-63552</Pid><PidType>14</PidType></Product><Product
GUID="{90120000-0051-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Visio Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89405-707-4159871-63071</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="3A" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="53" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12"
Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3562012
Installation ID: 013283726900825816725312972325821572457642476266069113
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: RMV82
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/27/2014 11:12:34 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 12:25:2013 15:59
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: LgAAAAEAAQABAAIAAAABAAAAAgABAAEA6GFwuHZK2jMchnYOKB9UbZombj1Gyg==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL WN09
FACP DELL WN09
HPET DELL WN09
MCFG DELL WN09
SLIC DELL WN09
SSDT PmRef CpuPm
I also ran the following commands in an elevated command prompt
NET START BITS
NET START WUAUSERV
SC QUERYEX BITS
SC QUERYEX WUAUSERV
Here is the result
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>NET START BITS
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>NET START WUAUSERV
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>SC QUERYEX BITS
SERVICE_NAME: BITS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 400
FLAGS :
C:\Windows\system32>
C:\Windows\system32>SC QUERYEX WUAUSERV
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>NET START BITS
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>NET START WUAUSERV
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>SC QUERYEX BITS
SERVICE_NAME: BITS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 400
FLAGS :
C:\Windows\system32>
C:\Windows\system32>SC QUERYEX WUAUSERV
SERVICE_NAME: WUAUSERV
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_PRESHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 400
FLAGS :
C:\Windows\system32>
I can't remember the last time updater worked correctly but it's been a really long time.
Thanks for any help you can provideHi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support -
Auto update of Ztable when ever BSID or BSAD tables updated
Auto update of Ztable when ever DB table updated
Hi experts
I want my Ztable get updated automatically when ever a record is created or updated in BSID or BSAD tables.
Here clear requirement
Generally using Company code & Allocation number ( 18 char ) my programs access BSID & BSAD tables it is taking very long time for execution almost more than 30 minutes ( data in millions ).
Step 1.
I created a new Ztable with limited fields Company Code, Customer, Document, Allocation Number and Posting date.
Step 2.
Before look into BSID or BSAD my program searches Ztable for Customer number & Document number using Allocation field and Company code.
Step 3.
Once get the Customer & Document numbers accessing BSID & BSAD table is very easy (now just taking less than 1 minute).
Created a new program to update Ztable every day but BSID and BSAD are live table so I want my Ztable get updated immediately when any entry posted in BSID or BSAD
Please help me
Satya
SingaporeYou need to check what is the procedure (T-Code) from which the data gets updated into these tables.
For example
when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI . -
Problem in MSEG Table updation
Hello All,
The problem is related to MSEG table updation after Stock Transport Order (STO) is done between Manufacturing plant & Depot. The problem is described below with an example.
In case of STO the Supplying Plant or vendor is SP02 and the Receiving Plant or the customer is RP15.in the STO under the shipping tab for Customer the system is showing RP15 and under the Delivery address tab for Vendor the system is showing SP02.
While during PGI when the material document is generated when we check the MSEG table two line items have been generated where we found that the field WERKS contained SP02 & RP15 against which the feld XAUTO is showing blank space & X symbol respectively.But in case of both LIFNR & KUNNR fields it is showing blank space, which indicates that both the vendor & customer fields are not getting updated in the MSEG table.
Now I want the system to pick up the data for KUNNR field (in case of XAUTO is X) also in the MSEG table i.e. RP15 should also be displayed in the MSEG table.
Is there any configuration to attain my requirement?
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka Mitrathe ADRx tables are central tables that are used from various transactions in SAP.
e.g. from customizing, master data maintenance, transactional data, such as purchase orders and sales orders.
use the ADRNR from ADR6 table and then lookup an entry in table ADRC to find and hint to its origin field ADDR_GROUP -
DEFTAX_ITEM table updation problem
Dear All,
We are using SAP Ecc 6.0
We have configured service tax through deferred tax codes.
Created Profit center wise Service TAx code and working Fine. Also we are executing S_AC0_52000644 - Deferred Tax Transfer Procedure and working fine.
Now we have created one more Service TAx code (X9) and prepared Purchase Requisition, Purchase Order, and Vendor Invoice .
Also made Advance Payment (DPR) using Purchase Order. All Tax calculation is correct every where.
But when i executed S_AC0_52000644 - Deferred Tax Transfer , it shoes Message 'List contains no Data"
Then checked table DEFTAX_ITEM. So in this table entry was not available for all those document which contains New Service Tax code X9.
All other entries are OK. Even we have made full payment also against Vendor Invoice .
What and where can be a probelm . why it's not updating entries in table DEFTAX_ITEM.
Due to non existance of entries , could not executed procedure S_AC0_52000644 - Deferred Tax Transfer for all documents which contains Service TAx code X9.
For other service tax code , there is o problem. Probelm is only with new tax Code X9.
WHere shall i Check for this probelm.
Regards
Swati ShahHello,
Yes, There was a probelm of Target TAx code
Now solved.
Thanx & Regards
Swati -
Calling Batch input from Web Dynpro - any alternatives for table updates?
Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, TineHi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra -
How to capture the table update
How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?
hi ,
follow these steps:
1. After you selecte the search help for New Responislbe person, domodify gets triggered.
2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
4. Finally bind the name fetched with the attribute binded to New Responsible person name.
Wdomodify :
************* *Read the New REsponsible person Pernr* ***********
DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
DATA lv_carrid LIKE ls_cn_sflight-carrid.
* navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
* get element via lead selection
lo_el_cn_sflight = lo_nd_cn_sflight->get_element( ).
* get single attribute
lo_el_cn_sflight->get_attribute(
EXPORTING
name = `PERNR`
IMPORTING
value = lv_carrid ).
****** *Check whethre a value has been entered in PERNR* *************
if lv_carrid is not initial.
*************Select Name based on pernr entered* ***********
select ename from pa001 into lv_ename where pernr = lv_carrid.
*******Set the Name atttribute with the ename value fetched* *****
lo_el_cn_sflight->set_attribute(
name = `NAME`
value = lv_cename ).
endif. -
Table update in user exit ZXM08U16
I'm trying to put in a check and update table when an invoice is processed in MIRO. So far i have
IF ?????-ebeln CP '92*' AND
?????-SHKZG EQ 'S'.
SELECT SINGLE *
FROM zmmvendorstop
WHERE lifnr EQ ?????-lifnr
AND stop_date EQ '00000000'.
IF sy-subrc EQ 0.
zmmvendorstop-stop_date = sy-datum.
zmmvendorstop-work_days = sy-datum - zmmvendorstop-start_date.
MODIFY zmmvendorstop.
ENDIF.
ENDIF.
I'm struggling on where to get the information to do the check from, so if anyone could help fill in the question marks it would be a great help.
ThanksHi,
It is available in the structre E_TDRSEG-TBTKZ (Credit/debit indicator) and E_TDRSEG-ebeln(PO number).. this is tables paramter. Lifnr is also available in the structure.
Regards,
Nagaraj -
Tables updating for atransaction
Hi All,
i wnat to know is there any transaction code or program to know the tables updated for a transaction.
we have a transaction called PPOM and FS00 ,i want to know which tables are updated when i create new records for these transaction codes.
With regards,
kiran IHi,
You can check tables CDHDR and CDPOS tables.
You can check the modified tables, values, by which transaction does this modification has been done.
Give current date to check. As these are cluster tables, it may take some time for retrieving data.
CDHDR - header details
CDPOS - item details
Regards,
Sailaja.
Dont forget to reward points, if answer helps you.
Message was edited by: Sailaja N.L. -
Hi all,
I have created a customized table. In one field I have assigned check table and foreign key checkbox is checked. But when this table is updated through a program it goes on creating any entry. Entry is not restricted to the check table values only. It goed on creatting values which are not in the check table.
How to avoid it?
Regards,
JeetuHey Matt,
My 10 points was deducted when I had previously asked for points same as Ankesh.
Just wanted to know what in cases like this ;-).
Believe post by Ankesh has been removed by Moderator.
Cheers,
Jayant
Edited by: Jayant Sahu on Dec 4, 2008 4:22 PM -
IMPORTANT: SQL Developer 1.2.1 Check For Updates Notice
Please note:
The Check For Updates notification yesterday and today (16th or 17th Aug) included a file with a number mismatch. This caused SQL Developer to continue to prompt for new Updates. This is also why a new installation of SQL Developer 1.2.1.32.00 prompted for Updates. This error has been repaired. You can now use Check for Updates to update from SQL Developer 1.2 to 1.2.1.
It remains true that after you have run Check for Updates that you must do a second restart. This is related to the framework and is a known issue.Without the second restart you will not be able to invoke the SQL Worksheet.
We have identified 2 errors that will be addressed, with new updates sent out using Check for Updates as soon as we can. These two errors are that reports with Charts do not currently work, and non-privileged users can't view tables.
The team apologizes for the inconvenience.
Regards
Sue Harper
Product ManagerHello Sue,
I just proceeded the update on my working machine too.
The version number what I talked about (on this machine) was 1.1.2.25 before and still is the same after the update.
(This is different from my home machine.)
By the way - I had to restart SQL Dev two times before it realized, that it already has the latest updates. One restart still seems to be not enough.
Yes I know that all the extensions has it's own versions.
But for me the question remains: What is the version info under "Help-> About" (in my case 1.1.0.21.) good for? If this number has a meaning - what is it? and if it has no meaning (and only the version number of every single extension is interesting) why does these version number exist at all?
You said: until then I recommend you use the full download.
Question: Is it guarantied, that (at any time) the full download always has all latest extensions ?
Regards
Andre -
Check table Harmonization Syncrhonization with R/3
Hi all,
Has anybody tried to synchronize the harmonized Check table data with R/3?
I am designing central master mainteance scenario however not sure how to syncronize (not Syndicate, that's easy using MDM tool) check table data with R/3.
e.g. If I create new Account Group, Plant Code, Material Type or Bank Detail how to update it to R/3? Was able to synchronize Vendor, Material and Customer data but could not find standard content to check table.
Manually updating check table in R/3 is that current option available? Is SAP working on providing some standard XI content/interface for this scenario?
Thanks,
AbhayHi Nikki,
One way to do this is go backwards from the data source and extractors to see on which tables they are based so that you can get the table filed to InfoObject mapping. Are you using a business content cube and / or data sources? -
Hi
Facing a problem with wrong VBAP table updation.
Sales order shows Business Area" A " at both header and Item Level but in VBAP table the business area updated is " B ". can't understand why it is happening.
Changelog doesn't indicate anything
Thanks and regards
NikhilHi,
Can you check how the business rule that is assigned at SPRO-> Sales and distribution -> basic functions -> Account assignment/Costing -> Business area account assignment?
Regards
Maybe you are looking for
-
Multiple IOS devices with one apple id and different PCs to synch
I have 2 macs, 1 Apple TV, 2 iPhones, 2 iPads, 3 iPods and 1 windows pc. I would like to: 1) sync each of them with one of the Macs using the same apple Id; 2) connect with FaceTime with each of them separately (at least the iPads and iPhones); 3) sy
-
RH 6 - Temp files on server can be deleted to free up space?
The temp folder on our production server is filling up and I'm wondering whether it is ok for us to delete any of these files. There are some files from 2009 there. The folder location is "C:\WINDOWS\Temp" and some of the files are named like JETFD8
-
What is best OS upgrade from 10.8.6 to be able to install spss 22?
Before the year is out I need to purchase and install, for the first time, statistics software SPSS 22 on my MacBook Pro but my current OS (10.8.6) doesn't support SPSS. The SPSS vendor site says I should install on another platform and then upgrade
-
Weblogic cluster consumes 100% CPU and bringing server to its knees.
I have BEA Weblogic 10.3.1 clustering as part of FMW 11g clustering. This is two node cluster on "Oracle VM" running OEL 4.0 with 4GB Memory and 4GB swap. Install seems to go with little difficulties like 100%CPU for short period but during the confi
-
I am trying to write a file using following code: is = some input stream ... os = some output stream XXXInputStream dis = new XXXInputStream( is ); while ((bytesRead = dis.read(tempbuf, 0, 100000)) != -1) { os.write(tempbuf, 0, bytesRead); dis.close(