Check your computer if you have a liquid cooled G5

Hello
Please excuse this thread as not possibly being in the right category
I am trying to reach as much of the Mac community and alerting them to a defect in the liquid cooled G5. Below is my communication sent to Apple?
Check this site out: http://www.xlr8yourmac.com/systems/G5coolantleaks.html
My Post to Apple:
Apple should have notified me of the leaking cooling system problem. I could have taken it to them for a check before the Apple care expired.
Checking the sites I have found that this has been a reoccurring problem with the G5 liquid cooled system.
I have bought the Apple care on both my g5 ppc and my G5 imac. My imac warranty is still in effect.
I was told by the store that there is and has been no recall on the liquid cooling system and they can’t give any credit on the repair unless Apple care authorizes the credit.
With all the problems regarding the liquid cooled system, Apple should accept some of or all the responsibility of the this defect.
I have recently purchased leopard and installed leopard along with the purchase of iLife and iWork. I have spent considerable amount of money with the purchase of this machine. 2 23” cinema displays, airport, Ram pci cards and software Cs CS2 and plug-ins for Photoshop.
This computer has less than two years of operating time as it’s in my home in Arizona. I am only in this house during the winters.
Bottom line apple should have notified me of this defect so I could have had it checked at the store before the warranty expired. Apple should accept this defect as there responsibility and correct with no charge
Thank you for any considerations
My post on the apple discussion board:
Just took my g5 liquid cooled computer into apple because it is leaking and dripped onto my power supply. I am looking at a little under a thousand dollars for repair. This was my first Mac that I bought in November of 2004. Its out of warranty but has only been used 6 months out a year as it is located in my home in AZ which I am only there for the winters. (Less than 2 years of actual use) They told me at the apple store there is no recall and I would have to call the apple care people to try and get some help on the cost.
I am upset with this problem and had read that after about three years they start to leak. I thought I was in good shape until this morning.
They told me that the power supply could be bad also. They will order the parts and call me when it’s done.
I do feel apple should have some responsibility with this leaking and I will try to talk to them on Monday.
I should have taken the computer in just before the warranty was up had it checked.
I will post back when I have some answers
Dick

I just talked to applecare today and they are replacing my g5 with a Mac pro 2.8. They are matching all my upgrades that I had on my g5 that I bought from them. I can't commend them enough, what a great company to deal with. They recognize they had a problem and doing their customers right.
Dick

Similar Messages

  • HT201272 Is there any way to open the apps on your computer once you have sync your phone

       Is there any way to open an use the apps once u have transfered them on your computer
        from your Iphone ??

    No.
    Apps are for iphone/ipod/ipad only

  • Can you save your itunes and songs onto an external hard drive so that incase your computer crashes you will still have all your music?

    Can you save your itunes and songs onto an external hard drive so that incase your computer crashes you will still have all your music?

    The procedures below are for "moving" your library but as long as you don't delete it from your internal drive you are basically backing up.
    iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Simple answer:  Copy your whole iTunes folder to the external drive.  For subsequent backups you might want to learn about cloning and using a tool that only does incremental backups of recently changed items rather than copying all your files each time.

  • How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account

    How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue

    you can try:
    *Wireshark: http://www.wireshark.org/download.html

  • ?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah lah go to iTunes story on your computer. You must verify your payment info before you can make purchases.  I did all that

    ?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah blah go to the iTunes Store  on your computer. You must verify your payment info before you can make purchases.  I did all that, updated payment info and checked paypal it is verified, and it still won't work. Im stumped

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Your computer does not have sufficient memory to perform this operation in Captivate

    I am currently new to Captivate 4 and I keep getting this error message "Your computer does not have sufficient memory to perform this operation. Do the following"
    I am trying to publish a large project were I recorded voice discussions over a power point presentation. The project is about 41 slides long and recorded using the video camera option. What can I do to stop getting this error message and publish this project. Help!

    Hi,
    Please check the memory available in your system.
    Also please try the following -
    - Open your Captivate project which you wish to publish
    - Go to menu item Edit > Preferences
    - In the Preferences dialog, go to Project > SWF Size and Quality
    - Uncheck the checkbox Advanced project compression
    Now try publishing the project.
    Regards,
    Mukul

  • Your computer does not have sufficient memory

    This problem is already tracked in a couple of other threads but I wanted to start a new one where I have already implemented most of the recommended fixes but am still having a problem. When attempting to publish various projects, and with no particular consistency, I'll receive this error:
    Your computer does not have sufficient memory resources to publish your file.
    I always launch Cp5 as an Administrator
    I always clear the cache
    All projects have the following Preferences un-checked: Advanced Project Compression and Compress SWF File
    I continue to reboot and re-launch until publishing inexplicably works.
    Once a project is suceesfully published, attempting to do so again usually results in the same error.
    After receiving the error, and attempting to publish again, Cp5 typically crashes
    I am running Windows 7 with a 2.66GHz processor and 4 GB of RAM on a 32-bit system
    Please advise on any fixes, solutions, work-arounds, or animal sacrifices that will help me out.
    Thanks!

    Rather than blame Captivate, this sounds to me like there's something in your project that might be causing instability.
    I was having the same problem on one of my projects many months ago when I was working on the Cp5 beta program.  It turned out to be due to having square braces [ ] in the Slide Notes area.  (This was confirmed by Adobe techs after I sent them the project file.)  Apparently there are some characters that should not be used in the Slide Notes area, especially if you use them in Closed Captioning.  It was the fact that I had accidentally included a Notes line with square braces as a CC line that caused the error.  So I removed all square braces, replaced them with pipe characters, and haven't seen the issue since.
    Some other questions in case the above doesn't work for you:
    Is this project perchance one that started life in a previous version of Captivate and you upgraded to Cp5, or was it created from scratch in Cp5?
    Does it do this in just this one project or on any Captivate 5 project you create from scratch?
    How big is the project?
    Does it contain any Flash animations that might contain AS2 code or that were published as AS2 (even though they only contain stop() actions)?
    Have you tried copying groups of files from this problematic project over to a fresh new blank project to see if you can replicate the issue there.  As soon as you see the issue reappear, try deleting out the last group of slides to see if that removes the issue again.  By a process of elimination you may be able to find the actual slide/s that are causing the issue, and then keep deleting items off the slides until you are able to find the actual object.  I've found corrupt objects this way on a few rare occasions that Cp projects became unstable.
    Hope this helps,
    Rod

  • I am trying to set up icloud on my new device. However it keeps showing hte message account not verified, check your email. I have tried looking for email there is nothing. How do I set this up?

    I am trying to set up icloud on my new device. However it keeps showing the message - account not verified, check your email. I have looked for email and there is nothing. How do I set this up?

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account.
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

  • Your computer does not have sufficient memory resource to publish your file

    I just downloaded CP5 trial version to see what's new.  Is it just me or is it really buggy?
    I received 'Adobe Captivate has stoped working' half a dozen times but managed to convert a small CP4 project (35 slides not a lot of animation or voice over) and tried to preview it.  I got the message 'your computer does not have sufficient memory resource to publish your file'.  I'm working on a new laptop with 4 GB of ram and I still get that message even when I kill everything else and only have Captivate running.  I'm working with Windows 7 on 64-bit OS.  Has anyone else run into this?  How much memory does CP5 draw?
    Needless to say I won't be upgrading any time soon...
    Best,
    Aimee

    Okay it happened again.
    Here's the error:
    And here is the CPU:
    I would be happy to upload the project file if you provide me instructions about where to put it.  However, I opened another project to test if it was just that project and I received the same error.

  • Performance Update 1.0 "Your computer does not have eligible hardware" ?

    i tried to do the apple Performance Update 1.0 update but when i double clicked the pkg file it says "This computer does not need this update." "Your computer does not have eligible hardware." why is it saying this and what should i do? just so you guys know i have a intell macbook pro 15" and ive been have overheating problems that disconnect me from the internet when it overheats and then i have to restart the computer to fix, and also my computer is real slow with alot of hanging beachballs since i upgraded to snow leopard. im hoping this update will solve these problems if i can figure out how to download it.
    another thing i should point out is this update did not come up in the software update. i went to the Performance Update 1.0 page myself to download
    Message was edited by: johnpalley

    Yeah but what about the rest of us!
    I have two Macbook Pros (Early 2008) with upgraded hard drives that didn't have this clicking (hard drive head parking) issue in Leopard but now do in Snow Leopard. Apple knows this is an issue, makes an update pretty much for every other model but this! I've called Apple Care and no one seams to have heard of this issue even though its all over the internet and they released an update to specifically address this issue!!! Come on Apple, if you going to attempt to address an issue do it for all the computers effected! What my $3000 spent a year and a half ago is no good and what... now you consider my computer obsolete?
    *** - I say that since I've contacted Apple about this for the past 2 months, they come out with an update to fix the issue, I'm all excited only to find out my computer doesn't quality & my computer will now continue to pause for 2-4 seconds 100 times a day!!! Apple get it together... Oh and its the same hard drive that is BTO from apple but since I installed it (which your able per Apple) the hard drive doesn't have the custom apple drivers?

  • EA2700 - Your Computer does not have Networking Capability?!

    I'm kind of a novice when it comes to networking and computer.  I receently purchased a EA2700 for the house.  I've managed to plug everything in the proper locations, got everything going and internet working on my PC with a wired connection.  Everything was going smoothly until i put the setup CD in to setup the router.  I ran setup and at the loading bar (0%) an error came up saying that "Your Computer Does Not Have Networking Capability".  I'm using Nvidia nForce that came with the motherboard (to my knowledge at least).  I can go on websites and also get to 192.168.1.1 BUT I just can't seem to get pass that networking capability error.  I've also tried to update the Nvidia nForce driver but doing that caused my internet to not work at all.  So I just rolled back to the previous driver which could get me online at least.
    If anyone has any idea how I can fix this, please let me know cause I'm out of ideas and not quite sure what I need to do at this point.  Thank you very much in advance.

    Refer to the links below for steps on how to setup a router.
    Setting up a Linksys router with Cable Internet service
    Setting up a Linksys router for DSL Internet connection
    Setting up a router with a Static IP account
    Changing the Wireless Network’s Name (SSID) on a Linksys Router
    Setting up WEP, WPA or WPA2 personal wireless security on a Linksys wireless router

  • Unable to open document. Please check to see if you have read permission for the above file.

    System:
    Adobe Acrobat X Pro, 10.1.2
    Windows 7 Enterprise, 32-bit
    Quad Core badass CPU
    4GB RAM
    MS Word 2010 (Office 2010)
    I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
    When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
    "Unable to open document:"
    "[document location]"
    "Please check to see if you have read permission for the above file."
    This happens after the little notice pops up "Starting the application which created the document...."
    If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
    It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
    "I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
    I have updated to the latest version 10.1.2 and still have this problem.
    This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
    This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
    If anyone has found the solution, please post it here.
    Thanks!
    B

    I think I found a solution. It seems to be relatet to normal.dotm.
    In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
    The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
    (By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
    I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

  • How many times can you change your iPod if you have insurance

    How many times can you change your iPod if you have insurance

    If you are talking aboutn the Apple warranty, if the iPod is defectve and not abused there is not limit.
    If you have AppleCare+ which covers accidental damage
    two incidents of accidental damage coverage, each subject to a $29 service fee plus applicable tax.1

  • My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

    My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

    How to use multiple iPods, iPads, or iPhones with one computer

  • When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?

    When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?
    More info: I've combed through the settings in facebook and there is nothing that shows I'm blocking anything from accessing it.

    Sure sounds like a Facebook setting. When you look at your Privacy Settings in Facebook (on facebook.com), you should see something under "Apps you use" that says
    Turn off your ability to use apps, plugins, and websites on and off Facebook. After you turn this off, we will not store information about you when you use apps or websites off Facebook.
    The "Turn off" is a hyperlink that shuts down the Facebook platform. If you don't see this, or if the wording is different, you may have (inadvertently?) shut this off, and should be able to turn it back on.
    Edit: The sequence to that screen on facebook.com is: Privacy Settings (from the upper right dropdown), then "Ads, Apps and Websites" will have an "Edit settings" link to the right. This is where you'll see the "Apps you use" screen.

Maybe you are looking for

  • SAP ISU - Accounting entry - Transaction EK02

    Dear All, When I try to add a G/L Account No. to a Sub-transaction (Transaction EK02), I have this error message : u201C Transact. 0050 G650 in CC 9852 div. 5S is statistical; do not specify G/L accnt Message no. EK203 System Response Processing is c

  • Macbook Pro screen turns black and has to be force restarted

    I have a 2010 15 inch Macbook Pro that I purchased for college and that is mainly what  I use it for! However lately (the past 3 months) my computer has been turning black with use of videos, pictures and sometimes just my broswer in general. It does

  • Java.security.AccessControlException: access denied (java.util.PropertyPer

    Hi All, I try to run an applet from Solaris 8 server on some client machine using IE5 and NetScape 6.2 ( I installed JRE 1.4, I also try other JRE versions) but I get the following errors again and agian, I even try to use appletviewer on the Solaris

  • Streaming Music needs to reconnect each time after viewing photos

    Hi I have 200Gb of music, so I stream this to my TV. Photos are obviously sync'd. However, to get to my photos, I have to go to the source menu, and choose TV (Since "Shauns Music" menu only says Movies, TVShows, Music, Podcasts, Settings and Sourc

  • Dual Layer Compatibility

    Using Encore 2.0 to author a dual layer DVD. I have set the rate at 7 for the m2v and before I begin authoring I am just curious what everyones experience has been with Compatibility. What is the success rate? 50%? 70%? Also what is the best medium t