Checkbox still disabled

Hi,
I have created a kind of form like the following:
Chackbox - Input filed
I would like the input field to become enabled when the checkbox is checked. The problem is that my checkbowx is always disabled, even when I choose enabled in the UI Element properties, and even when I bind the checkbox to a true boolean context attribute.
What is wrong with my checkbox ? I am not able to make it work properly. Any advice on the problem ?
The context attribute is initialized in the DoInit method of the View Controller. It's value is displayed using the message manager to see if it is truly true or not and it is.
Thanks in advance for your help,
Thibault

I think I am really missing something. I decided to delete all attribute values from the context and restart from scratch. So I created new attributes of boolean type, changing their name.
As a result, now I got one check box working, but not the others. So I went further and realized that every checkbox enabled property was linked to the same attribute value: isCheckBoxEnabled. So I set this property to true instead of binding it to a context attribute. And now everything is working just fine !!
Any comment on the mistake I made ? Maybe this post will help some other beginners trying to figure out why their checkboxes are not enabled !!

Similar Messages

  • Checkbox gets disabled on custom screen

    Hi All ,
    I have a raise an error message on a custom screen which has an ALV grid display (OOPS ALV) .On top of the alv grid ,i have couple of checkboxes .
    I have to raise error message based on the grid display values.The problem is ,if i raise error message ,the checkboxes get disabled and i have to go back and execute again correcting the problem .Instead the user wants to be in the same screen and should be allowed to correct .I am not able to do this .Please help me how to make the checkboxes active to input again without going back ??
    thanks

    Build the screen with 2 sub screen areas. In the top subscreen area ( selection screen )
    , Have the 2 check boxes.
    You can use
    selection-screen begin of screen 800 as subscreen.
    Parameters : var1 TYPE c AS CHECKBOX,
                         var2 TYPE c AS CHECKBOX.
    selection-screen begin of screen 800 as subscreen.
    You can use At selection screen events to throw an error but still be in the screen without an issue.
    Have the ALV in the bottom subscreen area.
    In the PBO for the main screen,
    Call the subscreen 800 ( selection screen)
    Call the subscreen ALV .
    Hope it helps.
    Cheers
    Sujay

  • Why is my I-tunes account still disabled?

    My account got hacked a few weeks ago and they bought in-app purchases from a game called KingdomConquest. I contacted Itunes and they re-funded me. I also went and changed my password and security questions. FOr some reason my account is still disabled. I can buy anything or update anything. Could someone please help me.

    If loving out then then logging in at Settings > iTunes and App Stores doesn't work then follow this procedure:
    1. Go to Settings > iTunes & App Stores > Apple ID.
    2. Tap your Apple ID.
    3. Tap View Apple ID.
    4. Enter your password.
    5. Go to Country/Region in the popup window to change to the desired store.
    See also: http://support.apple.com/kb/HT1311

  • My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD

    My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((

    i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE

  • My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME

    My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME

    I have the same problem with mine... but im trying to find a way to fix it without restoring it...
    but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
    Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
    good luck tho
    ~sam

  • Why is my Apple ID still disabled when supposedly  was fixed by apple httsupport this am over 12 hours agora dithery said it would be disabled no longer then 8 hours and I still am unable to buy anything in the I tunes store or pay for any apps or games

    Why is my Apple ID still disabled when supposedly it was fixed by Apple ID support over the phone  this am over 12 hours ago and they  said it ( my Apple ID and password) would be disabled no longer then 8 hours and I still am unable to buy anything in the I tunes store or pay for any apps or games.

    We are fellow users here on these forums. Have you tried logging out of your account on your iPad by tapping on your id in Settings > iTunes & App Store and then logged in and seeing if it then works ?

  • HT1459 I tried to restore my daughters ipod and it has a download on the itunes. I tried to open the download and that did not work. Her ipod is still disabled after the 5 hour download. What should I do now? Thank you. Sam

    My daughters iPod is now disabled because of my youngest daughter trying to get on it while away. I tried to restore it as per instructions via support site. It took 5 hours to do the download. I left it over night and in the morning I found the iPod still disabled. I have a download on iTunes so I tried to click on that and it won't open. I have to admit, I am not a computer wizz here. Could someone possible direct me to what I should do now? Thank you.

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • I have set the presence to screen only but the checkbox still prints adobe livecycle

    I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
    This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
    But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

    Intel-based Macs: Resetting the System Management Controller (SMC)
    Power
    The computer sleeps or shuts down unexpectedly.

  • TS2446 After resetting my password, account is still disabled

    I'm having trouble signing in to the app store, After resetting my password, account is still disabled. Any other options?

    Contact itunes support

  • My apple id still disabled, ive done the resolution on apple support. what should i do?

    my apple id still disabled, what should i do? reseting the password isnt working.

    From the article:
    Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance."

  • TS2446 My Apple ID has been Disabled - i reset my password, but still disabled

    Apple ID has been Disabled, I reset my password, but still disabled.

    Contact Apple for assistance by going to https://expresslane.apple.com ; click ‘More Produces & Services’. In the next page select ‘Apple ID’, and then 'iTunes Store, App Store or Mac App Store’, then ‘Disabled Apple ID’.

  • My iPad is disabled, ITunes did not work, i erased, still disabled.

    My iPad is disabled, with many attempts of trying to connect it to itunes it did not work. I decided to log in icloud and erase the iPad since i had no important things in it, but that also didn't work. It's still disabled. HELP PLEASE!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I have reset my password but my iphone says my id is still disabled. why?

    i have reset my password but my iphone says my id is still disabled. why?

    Contact Apple for assistance by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID.

  • I am currently restoring my Ipod 5 however half way through recovering my ipod 5 iTunes say's "locked with a password unlock ipod etc... " and turns on the iPod and my iPod is still disabled what do i do?

    I am currently restoring my ipod 5 however half way through re-covering my ipod 5 Itunes says "locked with a password unlock ipod etc..." and turns on the ipod and my ipod is still disabled...
    what do i do??

    Try and force it into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • TS2446 i have reset my password but my account is still disabled

    i havent used my itunes account for about 9 months. i found out someone had hacked it so i changed my password then i forgot the new password. now i just bought a new iphone and i cant use my apple id because it says its disabled. ive reset my password again and its still disabled.

    Contact itunes support

Maybe you are looking for

  • Regarding sy-ucomm and ok_code

    hi experts, gud morning, i got something for sy-ucomm and ok_code.... <b>answer:::</b> In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM <b>receive the contents of the corresponding screen fields in the PAI even

  • 5 apple devices one apple id

    5 allpe devices one apple id

  • I cannot find my WD external hard drive.  It has worked perfectly until today.  I checked the cords but still no luck.  Help!

    I have a WD external hard drive that I have used for some time with no problems.  There is plenty of space left on it.  It is dividied in two with Time Machine and a personal section.  I backed it up yesterday after adding to it.  Today, when I plugg

  • Semicolons in filenames

    You can have a semicolon in a file or folder name on your hard disk, but if you have files/folders that contain semicolons on a DVD, they are not readable. Finder silently ignores such files/folders, so if you copy a DVD to (say) your desktop, then y

  • Update Position changes in infotype 0001.

    Hi Experts, I am doing salary change with promotion workflow, for that i am writing a function module which upadates 4 infotypes IT0000,IT0001,IT0008,IT0014. Using FM HR_INFOTYPE_OPERATION. But I am stuck in updating Positon change of the person in i