Checking in and out Help Projects
RoboHelp projects consist of more than just the .hpj file. It would be nice if RoboSource could check in and out the whole project rather than the individual files. Is this possible?
Hi there
From what you have posted it would appear that you are using RoboHelp for Word. I don't believe RoboHelp for Word has ever been configured to integrate with RoboSource Control.
If you were using RoboHelp HTML, it is actually configured to work with RoboSource Control and is totally integrated where as you work on topics they are checked out automatically.
You may wish to review the article linked below.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks
Similar Messages
-
Check-in and out freezes Dreamweaver CS3
I am using Dreamweaver CS3 on a PC with Windows Vista
Ultimate in a business environment. We have a seperate development
server (Local) and Internet server (Remote) that we use to check-in
and out and put files. This is done using our LAN. Previously we
used Dreamweaver 8 with the same setup without problem.
Initially DW CS3 worked properly with this same setup.
However, approximately 6 weeks ago the length of time to check in
and out, or put a file began to increase. Within the last several
days, it has been impossible for me to check in or out a file
without the process freezing DW. Another co-worker can still
check-in and out files from her PC using DW3, but it takes several
minutes to complete a check-in, out or put.
We know that memory is not a problem on either server and the
only thing that has changed on my PC with this setup is Adobe
Contribute being installed. I use Contribute to administer two
sub-sites for two employees who use it to update the sites.
I have uninstalled Contribute from my PC, removed my
Contribute profile from the server folders, uninstalled and
reinstalled DW3, the usual trouble-shooting things and DW3 still
freezes. BTW... I also have the same problems on another PC that
has XP Pro and DW3.
Any insight on what I am missing on this is greatly
appreciated.Hi - Yes, I have an old version of Contribute on here.
Probably part of the problem.
Anyway, after some back-and-forthing with Murray and a
conversation with an Adobe tech, I got things running again. Maybe
the same strategy will work for you.... and hopefully it's a
long-term fix for us both! See thread:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1303707&highlight_key=y
Good luck! -
I want to do a page transition in and out help please
I would like to make the site below.
http://www.gotmilk.com/#/gotmilkbrand/
I want to do a transition in and out
First, In the site (btn1) 1st page( mc?) is slided in,
and then, when click the buttons in the navigation bar is clicked (btn2) to go to 2nd page
1st page will be slide out, then
2nd page will be slided in.You can find many flash transitons here http://www.flash-filter.net/blur-effect.phtml
-
Checking in and out files (source control) in form 6i
Hai,
how we can make use of source control options in form 6i.
thnaks and regards
vivekHi there
From what you have posted it would appear that you are using RoboHelp for Word. I don't believe RoboHelp for Word has ever been configured to integrate with RoboSource Control.
If you were using RoboHelp HTML, it is actually configured to work with RoboSource Control and is totally integrated where as you work on topics they are checked out automatically.
You may wish to review the article linked below.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Hi
I'm having a few problems with this checkbox quiz i'm
re-developing from old Java Applets.
I've managed to create the checkboxes dynamically, but need
to get the true/false answers out of the dataset and show feedback
in the dynamic textfield box.
This link has the fla attached
http://board.flashkit.com/board/showthread.php?t=695320
Can anyone help... would be much apreciated.
JohnNo-one help at all?
-
if zero or one check box is checked then item (NO S)is shown
if more than one check box is checked then items will show (show S)
<cfparam name="variables.morethanone" default="0">
<cfset count.morethanone= 0>
<cfloop index="checkField"
list="#form.1#,#form.2#,#form.3#,#form.4#,#form.5#">
<cfif checkField EQ "on">
<cfset count.morethanone= count.morethanone + 1 >
</cfif>
</cfloop>
<cfif count.morethanone GT 1>
<cfset variables.morethanone = "1">
</cfif>
item<cfif variables.morethanone>s</cfif>
i wish to have the item show items:
in a page before submit.
when a ((no,0) or one ) checkbox is checked and submit then
items will become item (s disapears)
if more than one check box is checked then s will appear/show
after submit button.
the code i have does not show the s on the initial page
(before submit)
it show as
please click one of the following item instead i need it to
show: please click one of the following items
then the logic i have just explained above.
what do i do thanks.I'm not exactly sure what you want to do, but here's the code
that shows "items" when more than 1 checkboxes are checked on the
previous form page; otherwise, it shows "item":
<html>
<head>
<title>Untitled</title>
</head>
<body>
Target Page:
<br><br>
<cfparam name="Form.Checkbox_1" default="">
<cfparam name="Form.Checkbox_2" default="">
<cfparam name="Form.Checkbox_3" default="">
<cfparam name="Form.Checkbox_4" default="">
<cfparam name="Form.Checkbox_5" default="">
<cfset count = 0>
<cfloop index="checkField"
list="#Form.Checkbox_1#,#Form.Checkbox_2#,#Form.Checkbox_3#,#Form.Checkbox_4#,#Form.Check box_5#">
<cfif checkField EQ "on">
<cfset count = count + 1 >
</cfif>
<cfif count GT 1>
<cfbreak>
</cfif>
</cfloop>
item<cfif count GT 1>s</cfif>
</body>
</html> -
Encore 5.5 Check Project Issues and Adobe Help
Ok, so I am fairly new to Encore and my years of experience with DVD Studio Pro gibve me some insight into DVD design and Menu construction. However, trying to follow the logic in the Encore workflow is very frustrating. For example, I run the Check Project Panel to see where problems in my DVD authoring and construction have hit a snag. The problem is the Check Project Panel, although it opens a Properties Panel that Panel does not show a specific location of the issue. For Example:
Check Project shows:
Button Menu Item 1 (Problem) Link Not Set
In The PROPERTIES Panel it lists
NAME: Menu Item 1
Number: 12
Type: Normal
Link: Not Set
How, from this information, can I locate the button in question. I If in the CHECK PROJECT panel it indicated the location of the button, which menu, then OK I can locate it. Or, if in the Properties Panel the Button Location as to which menu is in question then OK I can locate it. But there is no Menu description. Instead you have to go through each Menu to locate the item. When working on a production deadline, such issues waste time. In DVD Studio Pro these issues did not occur. Although Encore allows alot of creativity, DVD Studio Pro, even the last version, is superior to Encore in my opinion. It is no wonder that over 70% of production houses preferred FCP to Adobe. Here's an idea for the Encore engineers, create an automated section where alot of traditional authoring issues are automated (BTW your Library of Menus are pretty bad in my opinion) so that it is easy to import a 35 chapter project and have it automatically set up a 4 or 5 menu page DVD and link all the chapters and Previous and Next buttons as well as the navigation of the buttons. Your current version wastes too much time and the Adobe Help is like being handed the text book and having to read the entire set up theory rather then link to specific issues. All of this for Standard DVDs not Blue Ray.
I have already received an apology from Video2brain.com regarding an incorrectly placed reference in Adobe Help i.e. "We'll be working w/ Adobe Help to get that description changed for that particular video, since it doesn't cover color correction in nesting sequences." In this particular case Adobe Help sent me to a Premiere Pro reference where the video explained the basics of Nested sequences but did not cover the specific issues I had and was seeking a reference for. Such poorly designed reference points added to the lengthy explantions one has to read through for Help, makes Adobe Help almost worthless. By comparison Apple references were very clear and to the point, in most cases. It seems that although Adobe Encore and Premiere have some very nice features, but they don't make up for some very big holes in this product.
Again this is my intial impression of Encore and Adobe Help from a former FCP/DVD Studio Pro user.I have not used DVD Studio Pro, but it has sounded like this is simpler there.
To be sure we are talking about the same Encore workflow, see "chapter index" and "multipage chapter index."
http://help.adobe.com/en_US/encore/cs/using/WS185296FB-D1BB-4d52-ABC4-316DF795FD05.html
http://help.adobe.com/en_US/encore/cs/using/WSf01dbd23413dda0e-3ea68760123ebe30b7c-7fff.ht ml -
Why can't I check out a project?
I've got TFS 2013 Express installed on my desktop PC (an older HP Pavilion Elite desktop running Windows 8.1 Pro). Sometimes when I get into Visual Studio 2013, open up a solution and try to check out a project within the solution, with less than 100 files
in it, TFS never finishes checking out the project/files.
Why is that? What's going on and what can I do about it?
RodHi Rod,
It would be better to let us know the detailed scenario and reproduce steps. When you work with TFS, you can edit your source code by Visual Studio after connecting to the team project in TFS. And you can change the source files in source control explorer
and it will be checked out automatically.
You can create a new workspace and then do a workspace mapping to get the source files to a new local path. And then try with the new workspace. If the issue persists, please elaborate more details with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I Have an iPad mini, iOS 8.1. When I'm on my iPad, it keeps going in and out of random apps. Going to settings is the worse. As soon as I click settings and it opens,it starts clicking different things and tries turning on and off settings! In Facebook, profiles and status get clicked. The screen zooms in and out multiple times. It reminds me of when you call the help desk for a computer or a computer at work and they gain access and move around clicking and you're doing nothing. Basically things are being clicked and I'm not doing it.....can anyone help?
At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion. the box says, "To open JavaApplication, you need to install a Java 6 SE runtime. Would you like to check for and install one? (smaller print) Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading. A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
Finally there are two boxes to click. One says not now. If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away. If I click on the second box, Install, it says The software is currently unavailable. To install a Java SE 6 runtime later, open Java Application again.
My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help. My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can. Help.Does this happen immediately after you log in? If so, one of your login items is probably causing it.
-
I uploaded to Maverick and now my mail always cc's me on every email I send out. I have checked Preferences and the Composing Automatically CC button is unclicked. How can I stop this?
Sounds like your phone has the jitters.
This is sometimes caused when a DLL fle is missing when you restore, so the ipsw pacakge wasn't installed corectly.
You could back up and restore, but if it doesn't help go to http://www.felixbruns.de/iPod/firmware/ and then download the same firmware your on.
Open up iTunes and hold Shift+Restore and select that firmware, you can't use anoy ther firmwares though.
Hope this helped -
I'm attempting to create online help sourced from a FrameMaker 10 book using Robohelp 9 and Web Help (primary layout).
The text is interspersed with numeorus small icons which, in the FrameMaker documents, are .bmp images inserted into anchored frames in the lines of text.
Most of these icons were imported by reference into the FrameMaker book's chapters. Some were copied from another FrameMaker book and pasted into the present book.
Many of these images are turning out blank in the finished Help project.
Robohelp seems to convert these images into JPEGS.
In the source FrameMaker book, the images which appear OK in the Help project have Object Properties including: Facets: FrameVector JPEG ... Referenced File: No File
The images which appear blank have different object properties there: Facets: DIB ... Referenced File: (address of the image's source file)
How can I fix this and make all of the images appear in the Online Help?Sorry, Jeff. I missed the key word in your instructions. Well, I did the import and still no luck. I'm getting the exact same results with the same images. (In some cases, I'm even getting hidden conditional text from the FM document body showing up in the image's frame instead of the image! See below.) This is bizarre behavior, but it's not new with the import. It is happening both in the linked and imported WebHelp with the same exact images. (Just another piece to complicate the puzzle.) So we have some jpeg images that are blank, and a few that are glitchy. From what I can tell, the commonality, besides the fact that all these new images are in jpeg format instead of gif format, is that all the blank and glitchy images are in a text inset. I'm beginning to think maybe RH just doesn't support text insets at all.
Arnis, I'll have to ask my colleague how she created the images next week when she's back from vacation. I have no clue if there are any differences between the jpegs and why some are showing up correctly. What do you mean by "compression type or level?" Are you asking about the resolution (high, medium, low) she chose when saving the images, or which program she used to do the screen capture and editing? (We have Adobe Photoshop CS5 and FM 11).
My next step is to copy-paste all the content from the text insets into my FM document (in the book I am linking) and re-render to see if that solves the problem. It will make single-sourcing impossible because I'll have to copy-paste the new content and images my colleague creates into my document each time we do an update, but oh well.
Here is an example of a glitchy image in RH:
And here is what it looks like in FM:
So bizarre! -
Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay KumarHi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
I'm trying to get RoboHelp 9 set up with Subversion. Thus far I'm using the RH UI to do everything, but I've seen posts from others saying they check the entire project in and out of source control. Can comeone please elaborate on how that works? I know that there are some files that you don't add to source control, such as the .cpd file. So how do you set everything up? Are you checking the folder that contains the project in and out? If so, how do you omit the files that are supposed to be excluded?
Hi,
You can check out the project from the RoboHelp GUI. Click Check out all to check out the entire project.
You can also use the client to check out all the project files at once. Typically, you would not integrate the project with version control. You just check in the files after you've closed RoboHelp.
For more info on RoboHelp and Subversion, see also http://www.adobe.com/devnet/robohelp/articles/robohelp_subversion.html
Greet,
Willam -
My pinch zoom-in and out in my Macbook Air isnt working. Help!
Can someone please help me.. my pinch zoom in and out in my macbook air isnt working. It happened about 2 weeks ago, in the settings all the zoom preferences are checked so i dont know whats wrong with it. The pinch zoom is the only thing not working, the double tap zoom and all the rest of the capabilities of my trackpad are working properly. I called apple but they couldnt help through the phone and wants me to pay $19.99 for a one time help.. Please help!
I've also noticed that the iPhoto zoom is erratic. Sometimes I try to use the trackpad to zoom, but the image just blurs for a second instead of zooming in.
I experimented a little and found that it helps, when zooming in, to make sure that your two fingers are very close together when starting.
Maybe you are looking for
-
My camera application has disappeared and the ipad wants a 4 digit number pass code that I did not set up. It will not allow me to reset defaults without this pass code. Please help
-
Lost connection between ovm-manager and ovm-server (ovm 3.1)
Hi, I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following message
-
Mail no longer syncs, MobileMe was fine, iCloud won't let iPod Touch sign in
4.2.1 , it's a 4 year old iPod Touch, mail synced using Mobile Me until recently. Now can't even get it to sign in in settings.
-
Transfering images from my BB8100 to my laptop
My Blackberry show up as a removable storage space and I can see the file structure and folders but when I go into the "pictures" folder there are no pictures showing up, yet I have taken loads of pictures and want to download them to my laptop - why
-
I've made a photo book project in the new Photos app and when I click Buy Book this is the error I receive, "Store Unavailable. The store is currently down for updates. We'll be back shortly." This has happened for the last 24 hours or so.