Hi Mahesh,
To me it seems that "Cisco_1" is a "name" configured on the ASA itself
So its not a name of an "object" or and "object-group"
Try this command and see what it shows
show run name | inc Cisco_1
It should give you the actual IP address associated with that name. Its probably some network address since we can see from your post that there is a /24 mask associated.
Alternatively you can just use the command
show run name
And find the correct name/IP pairing from the list. Depending on the environment, there might be several of these.
If you want to disable this mapping between a "name" and an IP address you can use the following command
no names
After this if you issue the command "show run object-group XYZ" you should be able to see an IP address instead of an "Cisco_1"
Personally I NEVER map an IP address to a "name". I think it just makes troubleshooting harder. It might be fine for people that use ASDM, but I use only CLI so it doesnt do me much good
Hope this helps
- Jouni

Similar Messages

How to check the owner of any Object in the database.

How to check the owner of any Object in the database.
Thanks
Himanshu

What about this ?
SELECT owner,Object_name,object_type FROM all_objects
OR
SELECT owner,Object_name,object_type FROM dba_objects

Where we check the authorization group & authorization object?

Hi all,
i have a std program & tcode like fb03 . now i want to know the authorization group & authorization object. so where we will check..?
help me.
thanks.
Vipin

Hi,
Use transaction SU21 & SU22 for Auth Objects & Class

HELP !!! How to check the size of an object in Photoshop ?

Hello,
I'm using Photoshop CS 3 to design a website. I used several shapes such as rectangle, line or ellipse of different size. Probably it is a stupid question but I don't know how to check the size of an existing rectangle. I tried free transform tool that selects my rectangle but doesn't show its size. Then I made a selection with rectangular marquee tool but I see nowhere the size of the selected area.
If you know the name of such a tool please help me !
Have a nice day !

Web images are all pixels. View at 100% at pixel view. that is your exact size

How to check the values of view object?

Hi all,
I created a new view object by right clicking my application module. Now when I try to retrieve values
of the attributes of the view object I am getting null pointer exception. How do I check whether the view has
some values in it or not manually using select statement ? I try to find the view in my database at database navigator
but it was not there. Kindly help me out in this.
Thanks,
Phanindra.
Edited by: 887737 on Oct 19, 2011 12:53 AM

Hi,
Right click on application module(yourAM in model project) and press Run,Then you can confirm whether your ViewObject is working or not.
Note:
Generally create viewObject using EO based or Query based how did you create viewObject
See:
http://download.oracle.com/otn_hosted_doc/jdeveloper/1012/bc4j/intro/bc_avo.html
http://www.adftips.com/2010/09/adf-model-creating-view-object-vo.html

TCODE to check the edit authorization of objects ?

If suppose I am not able to edit any of the objects in BI7 and I need to check whether I have the authorization's to edit that particular object in BI7, where do I check it ? Is there any particular TCODE to check ??
And also I need to know whether do we have setup tables for the customer datsource also or only for the SD & MM ...datasource's. Please let me know what other modules do not use setup tables.
Thanks,

You can try by this way
Switch on the trace for your userid in ST01 and start editing.
Once you authorization check failed, switch off the trace and execute the log. there you will get all the details related to your authorization to the queries.
when you are editing query in query designer means, you cannot get authorization check failed in SU53.
Please try this.
Hope this would help you to analyse more.

Can we check the Objects modifiable " option for standard objects

Dear Friends
In IR , we have imported SRM SERVER->SRM SERVER5.5
Then we have checked the option "Objects are modifiable" then we imported the IDOC from R/3 system under SRM SERVER 5.5 swcv.
Then created the mapping.It is working fime.
how ever i am not sure whether it is right process.Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
Regards
chandra

Hi Jai,
 >>>Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
No. As best practise you are not supposed to do so.
In order to implement any changes in the mapping we can do it rite.
Because recently i have applied one SAP note to my SRM swcv and one of the MM object was changed according to the requirements.
Thanks,
Prasanthi.

How to check the objects size in DBA_RECYCLEBIN

Hi All,
I want to purge dba_recyclebin, before that i want to check the size of all objects residing in dba_recyclebin.
I am using below query to goup by tablespace.
SELECT TS_NAME, SUM(SPACE*1024)/1024/1024/1024 AS "Size in GB" FROM DBA_RECYCLEBIN GROUP BY TS_NAME order by 2 desc
Kindly inform me is the correct way to check it. for example if the 10gb space is shown from this query, will i able to see 10GB free space after purging. Kindly confirm
Thanks
Krishna

I am using below query to goup by tablespace.
SELECT TS_NAME, SUM(SPACE*1024)/1024/1024/1024 AS "Size in GB" FROM DBA_RECYCLEBIN GROUP BY TS_NAME order by 2 desc
As I mentioned, the SPACE field is in terms of BLOCKS rather than bytes.
First confirm your database block size using
SQL> show parameter db_block_size
then modify the query as
SQL> SELECT TS_NAME, SUM(SPACE*<DB_BLOCK_SIZE>)/1024/1024/1024 AS "Size in GB" FROM DBA_RECYCLEBIN GROUP BY TS_NAME order by 2 desc;
I am quite sure the db_block_size in your database is 8192.
Since you have used 1024 instead 8192 as the block size, you are seeing the difference in DBA_RECYCLEBIN and DBA_SEGMENTS

How to verify the status of lock object???

Hello,
How to verify the status of lock object???
I need to know the status of the lock object and put the user in list.
Exists a FM for this?
Thanks!

You can check the list of lock objects for the ztable by this way....
Go to SE11, click the radibutton for lock object, then do F4 on the field. Click the "All Selections" icon, in the "Basis Table" field, put the table that you want the lock object for. click green check.
Regards.

How can i check the right list

Hello, dear helpers,
If the User has opend session.FindById("wnd[0]/usr/cntlCC_REP_****/shellcont/shell/shellcont[1]/shell") - This is the wrong list.
and the User has marked lines in the wrong list there is an error in this Code
selrows = session.FindById("wnd[0]/usr/cntlCC_REP_****/shellcont/shell/shellcont[0]/shell").selectedRows
error:"The control could not be found by id."
How can i check the right list?
look at shellcont[0] / shellcont[1] in the code
One solution is with "On Error Resume Next"
but i looking for a direck Check, similar as
myfindbyid= session.getFindbyIdName
Regards,
Emil

Hello Emil,
look here: http://scn.sap.com/docs/DOC-49101
This solution describes how to check the existence of an object. On the one hand you can avoid the error message "control can not be found" and on the other hand you can check the using of the correct control.
Hope it helps. Let us know.
Cheers
Stefan

IPad2 cannot retain the Wi-fi network

Fellow iPad users,
My iPad2 cannot retain the Wi-Fi network it is hooked up to. After 5-10 minutes of browsing, Safari displays the message that it cannot open the webpage. So I have to reset the connection through settings and it starts working again, but for only the next 5-10 minutes.
I have checked the Wi-fi network and my laptop can connect just fine and I can browse arounf uninterrupted.
Any help and pointers will be deeply appreciated.
Saad

AnaMusic,
Yes, actually! I've read the content on the link but to no avail. My problem is different in a sense that I get connected via iPad, browse for some time, then i automatically stops opening a webpage and I have to manually "Forget it" the network and re-connect.
I wonder why would it not retain while my laptop right next to it would do fine.

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

Checking the status of task records tied to the custom object 3

We are using custom object 3
There has been lot of configuration work done on this object.
There is a checkbox on the UI. When a user will checks off the check box, a task record(s) is created depending on the condition.
Is there a way for me to check the status on the task records and then set a field on the parent record i.e. custom object 3.
Thanks,
Nitika

To whom are you speaking?

AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437

When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net. I get error 651. I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up. I would like a work around.

Checking the IP of network object

Similar Messages

Maybe you are looking for