Cheque number changes automaticaly after taking the print out

Dear All,
The scenario is after taking the print of cheque the cheque number changes automatically.
Suppose the cheque number is 122222.
After printing it changes to 1,2 etc.
Why is it happening?
I am using SAP 8.8 PL 15.
Thanks & Regards-
Mona

Dear Mona,
Check this to see if relates to your question: Manual Check Number changes when checks for payment is printed
Thanks,
Gordon

Similar Messages

How to read data after using the PRINT function in visual basic

I know the benchlink can capture the spectrum analyzer screen for me, but I want to integrate it into my application. I use NI spy to detect the communications from the benchlink and put it into my application. After sending the "PRINT 0" command, my "ilrd SpectrumAnalyzer, temp, 500" command doesn't work, giving me EARG error. Does anyone knows if it is because I can not define the temp to be string or some other problem?
b.t.w, the communications I get from NI Spy actually read some unknown characters from the instrument, what kind of data it is? Any idea how to use it?
thanks.

Hello elm,
This is completely dependent on your instrument; if you are getting the data then you are halfway there. Look in your instrument's programmer's reference manual to see if they mention how the picture is encoded in bytes. There are so many different ways to encode a picture in binary that speculating and guessing would probably never yield the true result. If there is no mention in the manual, contact the instrument manufacturer.
Sorry I could not be of more help.
Scott B.
Applications Engineer
National Instruments

How to control the print out

Hai
I create the scrip program I want to get only one print out in each document number. After that I want to restrict that print out that each document number how I should do it. Ex: I got the print out doc no. 00111 at once after that never gives the print out if I click print commandI want to restrict only one print out (I create the Z-table and I want to pass flag when I press print command but I dont knw how to do it if I get the solution for that my problem wil solve)
Regard
nawa

Hi,
try this..
data: v_docno like ztable-docno.
select docno from ztable
                    into v_docno
                    where docno eq <curr doc no> and "u should provide current doc no here
                              printed eq 'X'.                     " suppose 'printed' is the flag field name
if sy-subrc NE 0. "i.e if form is not printed for this doc no, then print form
call function open_form
call function write_form.
call function close_form.
elseif.
message e001(zmsg).   "message: form already printed for this doc no.
endif.
regards,
Ravi

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

The word "ORIGINAL" is not appearing in the print out of documents

Hi,
For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
Thank you,
eric

Hi Eric,
The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
The solution is to chnge that remarks in the PLD to text "Original".
Cheers

How can i take out the print out of invoices

i want to see the print preview of billing document and i want to take the print out also
but i m unable to do this
so wat is the navigation to do this please suggest.
regards
subrat

Output of Invoice:
Billing document (Change Mode) : VF02 --> Enter (takes to main screen) --> on the top line Goto --> Header --> Output --> maintain output type --> Enter --> back --> Enter printer (in most cases LOCL) --> Enter & SAVE.
Move out of billing document & revisit Billing Document in change mode(VF02) --> In the initial screen itself, on the top line o to Billing Document --> Output --> Screen / preview > Enter> a screen will pop-up on which printer name is mentioned --> Enter & you will get the preview of Invoice.
To Configure printer, take assistance from basis consultant.
Regards,
Rajesh Banka

How to take the print out of the entire data from the waveform chart

i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
also how can i take print out of the data between given interval??
please reply me
thank you

There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
Jonathan Hildyard
Applications Engineer
National Instruments
Attachments:
DAQ_with_Print.llb ‏115 KB

Is there any possiblity to not to take the print out before release of PO

Is there any possiblity to not to take the print out before release of PO.
Please give some inputs to set up this in system.

Hi,
Thank you for your reply with kindness.I will appreciate your help.
I found nothing like what you have mentioned .Please find the programme details in my system.Please help in this reagrd.
FUNCTION EXIT_SAPLMEDRUCK_001.
""Lokale Schnittstelle:
*"       IMPORTING
*"             REFERENCE(IX_DRUVO) TYPE DRUVO
*"       EXPORTING
*"             REFERENCE(EX_RETCO)
*"       CHANGING
*"             REFERENCE(CX_DOC) TYPE MEEIN_PURCHASE_DOC_PRINT
*"       EXCEPTIONS
*"              NO_OUTPUT
INCLUDE ZXM01U04 .
ENDFUNCTION.
Even-- nothing is avaialble in Include programme also.Please help in this regard.
What is my further action to this.

ICal won't stop taking the times out of my event names

I make my calendar events as follows: "10:00 doctor appt"
This makes it so I can see the time at a glance and means that I didn't forget to put a time. I also like feeling entirely in control of my calendar.
However, iCal keeps taking the time out and adding it to the state of the event, which I don't like. I don't mind it changing the state as long as it leaves the time in the text. I've tried to find a way to turn off this functionality, but I can't find a checkbox for it. I've been having to manually fix the text on each event once or twice before the time will stay, which is extremely annoying. Is there any way to get the text to stay that I've missed? If not, can Apple please include a fix for this in their next update? Thanks.

Betafly,
Generally speaking, I enter my events in the "Month" view.
Try entering the event by typing "doctor appt at 10:00" This is what is displayed when I use that entry method:
If the "Month" view window is too small the time will not display, so make sure that the window is large enough to display the time.
Also, open Calendar Help and look for "Add events to calendars." That will help explain various text entry techniques.

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

While printing google map from FF4 its not displaying the map in the print out paper?

FF4 displaying the google map in my website. But while printing google map from FF4 its not displaying the map in the print out paper.
I chekced this FF 3.6 and there is no problem with this and other versions. FF4 having this problem.
What should I do for this? Please let me know.

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am setting up for the first time, i didn't get the print out while setting up with my sign info

i am setting up for the first time, i didn't get the print out while setting up with my sign information. None of my email information or original password are working.

Hi there, what printer model do you own?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

We have a 2009 white macbook it got to 7% power was shut down wont recharge tried taking the battery out and magsafe nor light on the magsafe

we have a 2009 white macbook it got to 7% power was shut down wont recharge tried taking the battery out and magsafe no light on the magsafe or power on the macbook? do we need a new magsafe or has the battery died?

Hi degsy t,
If you feel you may have potential battery or charger issues with your MacBook, you may find the troubleshooting steps in the following article helpful:
Mac notebooks: All about batteries
http://support.apple.com/kb/ht1446
Regards,
- Brenden

A/P Invoice Vendor Ref Number Field updating after adding the Invoice Copy

Hi All,
              I am able to change the Vendor Reference number in A/P Invoice Document after adding the Document. I want to restrict this to happen. Plzz help how to do this????
Regards,
Sree.

1.The Modify Posted A/P Documents authorization refers to some fields only, e.g. the Due Date or Pay to address.
2. Additional authorization can be defined only for full forms, not for fields.
3. The SP Joseph suggests will refuse those modifications when the Vendor ref is empty.
To avoid modifying the Vendor ref you can use this code:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
set @li=
(select max(t.LogInstanc)
   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
IF
   (select isnull(t.NumAtCard,'')
    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
!=(select isnull(t.NumAtCard,'')
   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Vendor refernce not modifiable !'
end
END
Or if you want to allow modifying an unfilled reference, then this:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
declare @pref nvarchar(100)
set @li=
(select max(t.LogInstanc)
   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
set @pref=
(select isnull(t.NumAtCard,'')
    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
If @pref !='' and @pref !=
(select isnull(t.NumAtCard,'')
   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Filled vendor refernce not modifiable !'
end
END

Cluster Shared Volume disappeared after taking the volume offline for Validation Tests.

Hi,
After an unknown issue with one of our Hyper-V 4 Node cluster running on Server 2008 R2 SP1 with fibre channel NEC D3-10 SAN Storage all our cluster shared volumes were in redirecting mode and I was unable to get them back online. Only after rebooting all
the nodes one by one the disks came back online. Eventlog messages indicated that I had to test my cluster validation. After shutting down all the virtual machines I set all the cluster shared volumes offline and started the complete validation test. The following
warnings/errors appeared during the test.
An error occurred while executing the test.
An error occurred retrieving the
disk information for the resource 'VSC2_DATA_H'.
Element not found (Validate Volume Consistency Test)
Cluster disk 4 is a Microsoft MPIO based disk
Cluster disk 4 from node has 4 usable path(s) to storage target
Cluster disk 4 from node has 4 usable path(s) to storage target
Cluster disk 4 is not managed by Microsoft MPIO from node
Cluster disk 4 is not managed by Microsoft MPIO from node (Validate Microsoft MPIO-based disks test)
SCSI page 83h VPD descriptors for cluster disk 4 and 5 match (Validate SCSI device Vital Product Data (VPD) test)
After the test the cluster shared volume was disappeared (the resource is online).
Cluster events that are logged
Cluster physical disk resource 'DATA_H' cannot be brought online because the associated disk could not be found. The expected signature of the disk was '{d6e6a1e0-161e-4fe2-9ca0-998dc89a6f25}'. If the disk was replaced or restored, in the Failover Cluster
Manager snap-in, you can use the Repair function (in the properties sheet for the disk) to repair the new or restored disk. If the disk will not be replaced, delete the associated disk resource. (Event 1034)
Cluster disk resource found the disk identifier to be stale. This may be expected if a restore operation was just performed or if this cluster uses replicated storage. The DiskSignature or DiskUniqueIds property for the disk resource has been corrected.
(Event 1568)
In disk management the disk is unallocated, unknown, Reserved. When the resource is on one node and i open disk management i get the warning that i have to initialize the disk. I did not do this yet.
Reading from other posts i think that the partition table got corrupted but i have no idea how to get it back. I found the following information but it's not enough for me to go ahead with: Using a tool like TestDisk to rewrite the partition table. then
rewriting the uniqueID to the disk brought everything back. But still no explaination as to why we had our "High Availability" Fail Over cluster down for nearly 2 Days. This happened to us twice within the past week.
Anybody that an idea how to solve this? I think my data is still intact.
Thanx for taking the time to read this.
DJITS.

Hi,
Error information you provided indicate disk connection failure issue, please confirm shared disk 4 is available:
To review hardware, connections, and configuration of a disk in cluster storage:
On each node in the cluster, open Disk Management (which is in Server Manager under Storage) and see if the disk is visible from one of the nodes (it should be visible from one node but not multiple nodes). If it is visible to
a node, continue to the next step. If it is not visible from any node, still in Disk Management on a node, right-click any volume, click Properties, and then click the Hardware tab. Click the listed disks or LUNs to see if all expected disks or LUNs appear.
If they do not, check cables, multi-path software, and the storage device, and correct any issues that are preventing one or more disks or LUNs from appearing. If this corrects the overall problem, skip all the remaining steps and procedures.
Review the event log for any events that indicate problems with the disk. If an event provides information about the disk signature expected by the cluster, save this information and skip to the last step in this procedure.
To open the failover cluster snap-in, click Start, click Administrative Tools, and then click Failover Cluster Management. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and
then click Continue.
In the Failover Cluster Management snap-in, if the cluster you want to manage is not displayed, in the console tree, right-click Failover Cluster Management, click Manage a Cluster, and then select or specify the cluster that
you want.
If the console tree is collapsed, expand the tree under the cluster you want to manage, and then click Storage.
In the center pane, find the disk resource whose configuration you want to check, and record the exact name of the resource for use in a later step.
Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type:
CLUSTER RESOURCE DiskResourceName /PRIV >path\filename.TXT
For DiskResourceName, type the name of the disk resource, and for path\filename, type a path and a new filename of your choosing.
Locate the file you created in the previous step and open it. For a master boot record (MBR) disk, look in the file for DiskSignature. For a GPT disk, look in the file for DiskIdGuid.
Use the software for your storage to determine whether the signature of the disk matches either the DiskSignature or DiskIdGuid for the disk resource. If it does not, use the following procedure to repair the disk configuration.
For more information please refer to following MS articles:
Event ID 1034 — Cluster Storage Functionality
http://technet.microsoft.com/en-us/library/cc756229(v=WS.10).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Cheque number changes automaticaly after taking the print out

Similar Messages

Maybe you are looking for