CIN Pricing for the Intercompany STO

Hi All,
I am doing a Inter Company stock transfer Process.I have created a Pricing structure for the Inter company stock transfer Pricing.
PO is created  through the MM module nad in PO I can see the Priceses are maintained but when I am creatng Delivery I am not getting any value in the condition TAB.
Can any one explain how the Price from the PO will appear to the SD pricing Procedure.
This Intercompany  Process is CIN dependent.
Please explain me.
Regards
Venkat.

Hey the PO Pricing procedure is not required...its to load cost and all at the receiving plant and there is no need to view pricing at delivery level
you have to configure like:
1. SPRO>SD>Basic Function > Pricing >Pricing Control>Define And Assign Pricing Procedures>Assign document pricing procedures to billing types  that is for you IV billing type it must be I
2. 1. SPRO>SD>Basic Function > Pricing >Pricing Control>Define And Assign Pricing Procedures>Define Pricing Procedure Determination  and here on combination of sales area and Billing doc pricing procedure i.e. I and with customer pricing procedure maintain you Pricing procedure and call all there record and use these conditions
This will help you to solve your problem

Similar Messages

  • Pricing for the Enterprise product

    I read the article about the Sun Java System Enterprise and they state that Sun Announced this:
    * New releases of the Java Enterprise System will be made available on a regular, quarterly schedule.
    * There will be a single, per-employee, per-year subscription price for the package (rather than a separate license fee for each package component). The price is a low $100 per employee per year.
    * Consulting, training, and support services will be provided as part of the subscription.
    Also later in the article they mentioned Sun Java Studio Enterprise being integrated and they then said this:
    * It's fully integrated and tested.
    * It's installable as a single package.
    * It will be released on a regular schedule.
    * It's based on a single, per-employee, per-year subscription price. In fact, it adds only $5 to the per-employee, per-year subscription price when ordered with the Java Enterprise System.
    * It offers a variety of support services as part of the subscription.
    So according to this per employee subscription we could get the Sun Java Studio Enterprise for $105.00 per employee. Is this correct information they have?
    The reason I ask is that I am the owner of Sun 1 Studio Standard and they have this upgrade for the Sun Java Studio Enterprise at $995.00. But according to the article you can get this for the subscription of $105.00 per employee. Can someone verify this per subscription stuff and let me know what this includes etc.. I own a small development company and we have 5 Java developers on staff (would like more) and we normaly use Netbeans and Sun 1 Studio for the ejb work because we recommend the Sun App server products to our clients. Now the subscription prices would greatly effect the price it would take to license 5 versions. I hope the article was correct and if it is I would need to get some information also on who to contact about the purchase of the subscriptions.

    Ok understand but I have some comments on this. Let's take the min. for the example.
    Let's say a company has the 100 employees and they have developers working on projects. According what was in the announcements this company could get licenses for JavaES and Java Studio Enterprise for $10,500.00. I'm not sure if this gives all their developers the right to use Java Studio Enterprise or not. I would assume yes. So let's say they had the same number of developers as I do on Java projects, 5. Since I am just a very very small company, making much much less for sure than this 100 employee company, I end up paying almost the same amount of money for 5 licenses of Java Studio Enterprise as this company with 100 employees. What is wrong with this picture. I do understand that Sun is trying to push their products into the larger businesses and this is the reason for this subscription but it does not help the small guys out there. Now imagine that this 100 employee company had 10 developers. They would get all 10 licenses for the same price and I would have to spend almost twice the amount that this company spends for teir licenses. Also, we are a outsourcing company that have clients in the US that do not have a clue to what a App server or Dirctory server is and do not have a clue what to use. We could push other products like .Net or WebSphere or Oracle but we push Sun. We have not had the chance yet to do development with the other Sun Servers like Identity or Directory servers but one day we might have this requirement or if we had the products to work with and learn from we could push these also for projects that could use this technology. So what bonuses do we get for this? None, actually just the opposite. Larger corporations win again. For a small company like mine to spend $1000.00 for some software is a nice chunck of change never the less $10,000.00. But our clients do have the money and this is what counts. I'm not sure if Sun has any programs for this type of company but it sure would be nice to be able to get the type of cost savings that this 100 employee company gets for us small guys.

  • Pricing for the document

    Hi
    My requirement is after the billing document is generated we will create a ZRA (Returns)Document
    So while doing the pricing is not getting copied from the invoice document.
    Is it possible to copy the Pricing using configurations ?
    Or any code need to be added for this .
    Please suggest

    Hi
    If you are creating  the Return Document with reference to your Billing document and Copy control setting is maintained in transaction VTAF, then as per standard the pricing will get copied.
    If you are not creating the document with reference to Billing doc.,then you will have to determine the price for thjis document.
    Regards
    Amitesh Anand

  • MM Pricing for Intercompany STO

    Hi Experts,
    We have a requirement from our client to configure a pricing procedure as below for the Intercompany STO process.
    E.g
    Standard = $100
    Mark up = 10%
    Transfer Price = $110
    PO pricing
    Dr         Inventory/COS                           $100   (Inventory account)
    Dr         COS I/C Mark Up                        $  10   (Markup G/L instead of PPV GL)
    Cr         I/C Payable                                 $110   (GRIR Clearing)
    They want to have the Standard cost of the Material as $100 and the PO Price as $110, but they want to have the Markup price($10) to go to a Markup Debit account instead of PPV during the Goods Receipt. Please let me know how to configure the pricing procedure to meet this requirement.
    Your valuable suggestions is highly appreciated.
    Regards,
    Hemant Kumar B

    HI,
    1.GO to m/06 create a condition type
        Cond. class   B Prices
        Calculat.type A Percentage
        Cond.category G
    2.Then create a transaction key say xx  in spro->mm->purchase->conditions->price determination->transaction /event key
    3.go to obyc with help of FI consultant maintain posting key, rules,debit g/l as u want.
    4.then go to M/08 and maintain the condition which you have created and from on gross price.assign the transaction key which u have created.
    check the flow.
    Thanks & Regards

  • Intercompany STO - Reverse Process

    Hi Gurus
    What is the process/config steps for the intercompany STO reverse process.
    Forward is:  NB (PO)  --> NLCC (Delivery) --> IV (Billing).  No sales order involved.
    Please advise the reverse flow and necessary configs involved.
    Regards
    RG

    Hello,
    As per standard practice for managing intra compnay or intercompnay stock transfer return, you can use the followig process;
    1.Create stock transport Purchase order and also tick mark the retrun indicator in the item overview.
    2. Now create delivery(return) with VL10B. You must have already customized delivery type and item category settings in customization
    For inter company transfer , use delivery type NCR and item cateory as NCRN
    For intracompany transfer , use delivery type NLR and item category as NLRN
    3. Goods reciept : Do the goods reciept for inventory management with movement type 101 , where as system will do the goods issue for return order with corresponding movement type 161.
    4. Post goods Issue wihch in this case will act as post goods reciept.
    Go to VL02N and do the Post Goods Issue
    With this the system posts the goods receipt in the background.
    For Cross-company-code:
    With Two-step procedure movement type is  673
    With One-step procedure  675
    The goods receipt is automatically posted with movement type 161.
    For Intra company code:
    With Two-step procedure the movement type is 671
    With One step procedure the movement type 677
    The goods receipt is automatically posted with movement type 161.
    I also suggest you please go through SAP OSS Note 430074 - Advice note plant return / store return which will help you in setting up the Stock transport returns.
    BR,
    Tushar

  • Intercompany STO return process pricing

    Dear Experts,
    SALE PROCESS WITH BILLING
    1) Intercompany Sale with billing
    Company code- 3000
    Plant -D001
    material qty-10 with price pr00 -1 USD with discount 10 %
    raise Purchase order
    TO
    Company code 1000
    Plant A001
    process flow= ME21NVL10B-VL02NVF01MIGO--MIRO
    RETURN PROCESS
    client want the same pricing what they paid from old  PO ( ME21N) to get back  money
    Company code- 3000
    Plant -D001
    material qty-2 with price pr00 -1 USD with discount 10 %
    raise Return Purchase order (with respect to old purchase order) to company code 1000 plat A001
    when i am doing my invoice (IG) at  company code 1000  how pricing should done
    question
    1) all pricing element should copy from Purchase order like PB00 , RA01 condition to my invoice (IG)
    then how account determination will happen
    or
    new SD pricing should carried out how????
    Please guide
    thanks in advance

    Hi Hanumant,
    In the above scenario you have mentioned, A001 is your supplying plant & D001 is the receiving plant (which is raising the intercompany STO).
    So as you mentioned inorder to return the goods, Plant D001 will raise a Return PO with all the conditions as that in its STO & will return the goods to plant A001 using 161 mov. & you can post a credit memo for the return PO.
    Incase of A001, you can create a return order (SD) with ref to its billing doc & do a return delivery to take back the goods.
    Thanks & Regards,

  • Excise Invoice cancellation in Intercompany STO

    Hi,
    We are creating the Intercompany STO from Depot to manufacturing plant.
    1)Creating the STO. Receiving plant is manufacturing plant
    2)Created the GI
    3) created the Outbound delivery
    4)Created the Outgoing excise invoice J1IJ from Depot.
    5) we are receiving the Goods at manufacturing plant with ref to Outbound delivery(materils is received at Quality Inspection first)
    6)Created the Excise Invoice "J1iex" Option "Capture excise Invoice" and "Without Purchase order"
    Sytem is created the partI and partII entries.
    Now we want to cancel the excise Invoice, How to do? we are trying to cancel but unable to do that?
    Regards
    Sapman man

    When you are returning the material, you get a material document.
    You create an Excise invoice by using J1IS transaction with reference to the material document.
    This excise invoice will come for monthly utilization
    regards
    prasad

  • Removal of stock in transit in case of Intercompany STO

    Hi Gurus,
    Problem : User was not able to set the delivery completion flag in the Intercompany STO because the goods issue qty is greater than that of goods receipt qty at the receiving plant. For that solution is given in the SAP note 167795.
    I am yet to implement the note but wanted to know how to clear the stock in transit (after setting the del. completion flag in PO) in case of IC STO, because it is considered as virtual stock in transit.

    Hi Sandip,
    the stock in transit for CC STOs is virutal as you said. It's always calculated from the GI and GR quantities. The actual formula is EKET-WAMNG - EKET-WEMNG. Until the GR and GI quantities ain't the same, it won't be cleared. You may want to have a look at SAP note 100690, too.
    Cheers,
    Attila

  • Pricing error in intercompany billing

    My client is using the intercompany billing process.
    There is a BOM item with item category group LUMF and the pricing happens at sub item level. In the sales order and the customer billing document the pricing happens at sub item level only.
    But in the intercompany billing the pricing happens at both main item and sub item levels. The pricing procedure is dfferent here.
    Both the sales pricing procedure and intercompany pricing procedure has the condition type ZI11. The requirement 22 is attached to the condition type at both the pricing procedures.
    In the intercompany pricing procedure, subtotal L is assigned to the condition type ZI11.
    The condition type ZI11 is configured as under.
    Access Seq : ZI11
    Condition class : B (Prices)
    Cond category : C (Qty)
    Rounding rule : commercial
    Manual Entries : B (Automatic entry has priority)
    Item condition
    Amount / percent
    Int-comp Billcond
    Can anyone tell me why the item is priced at both main & sub item level in the intercompany billing.
    Regards,
    Bala

    Hi,
    Please check with the defination of the Item cateogry for the Main Item for the InterCompany Invoice.
    The relevance for pricing should be ticked off.
    Reward points if it helps.
    Regards,
    Harsh

  • Why is it difficult to get a straight answer on future price increases for the PS CC $9.99 offer

    I own CS6 and am happy with it. I have been a PS user since the second version so I have extensive experience with updates and the value I seek. I am an advanced amateur so this is a hobby, not a profit source and Adobe needs to consider us. No one wants to buy a product that can continue to increase in price indefinetly after they already own one or can find substitues. The curret offer is more expensive than upgrading every other time (or when there is a great new feature   ) as I normally do. Taking into consideration that the current base pricing for new contracts for PS CC is $20 per month forever it is much more expensive and rise to even more unreasonable heights.
    Adobe should freeze the pricing for the $9.99 offer for 5 years (or commit to limit increases to a nominal amount) and consider this approach a steady annuity and as a way to secure existing hobbyists.  They have created a great deal of ill witth thier move to CC without a any real benefit to the customers.

    Noel you make somevery  good points.
    We never knew what the price of the next upgrade for the perpeual license was to be but if we did not upgrade our cameras then we had perfectly working software, Adobe of course tried to force the issue when issuing new versions of Raw (and excluding previous versions of PS) to many people's annoyance.But that is the Adobe we know....
    They could certainly commit to freezing the price as much as we could commit not to buy in on CC or in past not to buy into an upgrade if the new features were not that great. They needed to delight us into giving them our cash.Sadly I don't think they have realloy ever felt that way and although they have  innovated within the program and its interface are strating to show it's years (it is more like  Windows than any cool app) and DSLR photography is headed in the same  direction as Kodak. I am a skilled user and recomend it to anyone wanting to improve their work but I love it enough to konw its limitations.
    We can cancel as you siggest but we are left with nothing with CC.  I still own and can use PS6 if I don't like their new deal which is worse for them than getting a steady stream of tens for a known timeframe. It is one way of looking at it and maybe not their cup of tea but I think they should consider it.
    Not many people take the time to master PS and among the kids I know not many think they need to go past their phone and a coulple of apps. Maybe we are all heading in that direction.

  • Different pricing  for same material in 2 line items

    Dear All ,
    In a sales order  i have two line items of same material . One with the item category TAN and another REN . line item with TAN  is the normal sale item while as  second line item is  for Return of same materail . .
    Now i want Different pricing for the Normal sale item and Return item in single sales order . The pricing has to come automaticaly through the condition records
    Please suggest me how to do it
    Thanks in Advance .
    Satish

    Hi,
    Add the item category (field name: PSTYV) to the allowed fields in the pricing condition table.
    create new conditon table include the field item category.
    create a access seq that includes your new condition table
    Assign that access seq to the condition type which is assigned to the pricing procedure.
    create the condition records.
    This will solve your problem.
    Note:
    How will your customers accept if you reduce the price while returning?
    Otherwise create new discount type that including the condition table which contains the field item categry.
    And create condition record for that item category.
    Hope this will solve your problem
    Reward if usefull
    Muthupandiyan.

  • Pricing for 4 and 4s

    I'm getting very frustrated as the pricing for the 4 and 4s is yet to be changed to the announced lower prices.  Other providers had the new prices in their systems early yesterday... I handle a large corporate account and have many users wanting to take advantage of the price drops.  I'm a "usual" huge VZW fan, however, I can't imagine why in the world this hasn't been addressed yet, see no good reason or any explanation for it and find myself extremely disappointed w/VZW right now - EXTREMELY DISAPPOINTED...
    VZW - you are making my job more difficult - not happy

    I was told yesterday by a VZW customer service person (through the "Chat Now" feature on www.vzw.com), that the price was supposed to change yesterday "but it didn't." 
    "James" wouldn't give me any more information than that.
    The 4S is already $99 at Best Buy, but my plan is $50 more at BB than with VZW, so I'm obviously waiting for the price to drop with VZW.  Silly that they'd wait until the 5 comes out.....especially when they're telling people it was supposed to happen yesterday and when other retailers are already offering it at $99.

  • I'm on a prepaid plan for the 4s, i want the hotspot option which isn't offered on the prepaid plan.  heard the connection is too slow on the 4s only worth it on the 5 or 5s. would you agree? not sure how much the hotspot would increase my monthly bill...

    i'm on a prepaid plan for the 4s, i want the hotspot option which isn't offered on the prepaid plan.  heard the connection is too slow on the 4s only worth it on the 5 or 5s. would you agree? not sure how much the hotspot would increase my monthly bill....

    To use the hotspot for any of those devices, I believe you have to switch to a postpaid account and plan. You can see the pricing for the available postpaid plans under the "Shop" area of the website.

  • Advance Pricing -- For Diwali Offer

    How to give advance pricing for the this diwali offer
    1. For a stores, any thing worth more or equal to Rs 1000, INR purchasing bill (say Bill A) , a coupon will be issued which can be used only once for the next purchasing bill (say Bill B) which has to be more equal to Rs 200 INR, and discount of 20% is applicable for purchasing Bill (that is BIll B). No Coupon will be issued for Bill B, even if the purchasing amount be more or equal to 1000 INR after discounting.
    regards
    adarsh

    Hi,
    I dont see, you would be able to use promotional modifiers with PO's.
    Recently we logged an ER with Development to incorporate the same
    14736855 - NEED TO USE PROMOTIONAL MODIFIER ON PURCHASE ORDERS
    Another ER 4584793: LIMITED FUNCTIONALITY OF ADVANCED PRICING (MODIFIERS, PROMOTIONS, DISCOUNTS, CON too exists.
    Please review this
    Oracle Purchasing Integration with Oracle Advanced Pricing – Release 11.5.10 (Doc ID 394490.1)
    In this white paper you can see this
    Promotional Goods (Buy x, get y at n%)
    X Not supported
    Regards,
    Paarthy

  • Where's The CS6 Complimentary Upgrade for The Student and Teacher Editions?

    I bought the student and teacher edition of CS5.5 Design Premium a couple of weeks ago and got the email telling me how to get my complimentary upgrade to cs6 a few days ago. When I went on to adobe.com to look up the pricing for the student and teacher editions of the cs6 programs, there is no upgrade option (the only price shown says "Full from 449.00"). When I looked up pricing for the non-student and teacher editions, the upgrade option is there.
    Are the upgrades for Student and Teacher Editions not available yet? Is there anybody else who bought the Student and Teacher Editions having this issue, or is it just me?

    I talked with someone from Adobe earlier and they told me that I cant upgrade to another student and teacher edition but I can upgrade to a retail version still at no cost. They also sent me a link to a page telling me more about how to claim the upgrade, and the page mentions a "coupon code" that I have to enter during checkout.
    This was the email I got:
    Free upgrade to Creative Suite 6
    Thank you for your recent purchase of Adobe® Creative Suite® software. We're pleased to inform you that your purchase entitles you to a complimentary upgrade to the equivalent CS6 product (download version only).
    To redeem your complimentary upgrade, follow these steps:
    1.
    Find your equivalent CS6 product here.*
    2.
    Once you locate your equivalent CS6 product, select the “Upgrade from” option and complete all the required information.
    3.
    When your information is complete, select the “Add to Cart” button (the promotion price of US$0.00 will be displayed).
    4.
    Finally, select “Checkout” to complete the process.
    You have until August 5, 2012 to redeem the offer. Thank you for being our customer. We value your continued loyalty.
    Adobe Systems Incorporated
    Learn more about what's new in Creative Suite 6.
    * If your CS6 product equivalent is not displayed, you will have to select “Products” from the top menu and find your product equivalent through adobe.com.
    The email didnt include a coupon code, and I followed the steps but the price remains at the regular upgrade price. I read on the "how to claim" page the associate showed me that I would be getting a code no later than May 31st. Do you think this email was maybe informing me that I am eligible for an upgrade and that they would send me a coupon code at a later date?
    Mattgp

Maybe you are looking for