Cirrus Logic won't display 1024x768

Greetin's again.
As from my previous thread I mentioned that my GF6 6600 blew out and now it's back at the manufacturer hopefully getting replaced. My friend loaned me a cirrus Logic card... unsure as to what kind it is but either way...
I'm trying to get it to display at 1024x768 resolution but it refuses to do so.
Trying to get it to display at 24 bit just produces 3 of the same images. One in the top left corner, one in the bottom right and one in the middle, each hued a different color. Blue, Green and Red (not in that order.) 16 bit on the other hand just copies the image ontop at the top of the screen and bottom. 800x600x16 reproduces the top of the screen on the bottom. (i.e. if you bring your mouse cursor to the top of the screeen, you can see the cursor on the top of the monitor but it's also in the lower middle now.)
I tried Vert Hz ranges of 50-90 (that worked for my GF6), 50-100, 50-110 and 50-150. This monitor is probably pretty darn old and I have no idea what brand it is... doesn't even say on the back actually just says "plug & play" on the top right.
Any suggestions would be greatly appreciated. Thanks in advance.
(Edit) Added my xorg.conf file below.
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "extmod"
# Load "dbe"
# Load "record"
# Load "xtrap"
Load "freetype"
# Load "xtt"
# Load "glx"
# Load "dri"
Load "type1"
# Load "speedo"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
### Uncomment if you don't want to default to DDC:
Identifier "Monitor0"
### Uncomment if you don't want to default to DDC:
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 100.0
EndSection
# Section "Monitor"
# Identifier "Monitor1"
# HorizSync 31.5 - 48.5
# VertRefresh 50.0 - 90.0
# EndSection
Section "Device"
Identifier "NVidia"
# Driver "nvidia"
Driver "cirrus"
# Option "TwinView"
# Option "MetaModes" "1024x768,1024x768;1024x768,NULL;800x600,NULL;640x480,NULL"
# Option "SecondMonitorHorizSync" "31.5 - 48.5"
# Option "SecondMonitorVertRefresh" "50.0 - 90.0"
# Option "ConnectedMonitor" "Monitor0, Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "NVidia"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

The whole log? I think I'll spare you and just give you the part that matched the "Cirrus" part of the log. If you still need more, say so, the log is kinda long though:
(--) PCI:*(1:6:0) Cirrus Logic GD 5446 rev 0, Mem @ 0xe2000000/24
Voila. Sorry for the late reply, tax commission runs me ragged working.
(Humorous edit, it refers to the card name as "CL GD5446 Noname card", in the xorgconfig program. Ha!)

Similar Messages

Image with foreign characters in name won't display

I have an image on my drive whose name has foreign characters ("c�pia de frente.jpg"). To display the image my JSP reads the image name from the database and generates the following html:
<img src="../pictures/c�pia de frente.jpg">The page then displays a broken image icon for this image. Images in the same list which do not have foreign chars get displayed accurately. When I choose "show image.." in my browser I see that the image name has been rewritten into the following: c%C3%B3pia%20de%20frente.jpg. The rewriting that will display the image is instead c%F3pia%20de%20frente.jpg. I found the correct rewriting on another of my JSP where the image with the foreign chars actually gets displayed correctly although the code to generate the html is the same on both pages and looks something like this (simplified):
<logic:iterate id="listelement" name="list" property="rows" scope="request" type="org.apache.commons.beanutils.DynaBean">
<%
out.write("<img src=\"../pictures/"+listelement.get("name").toString()+"\">");
                         %> <br>
                        </logic:iterate> Every image that doesn't have foreign chars in its name gets displayed accurately but images with foreign chars in their names won't display. What am I doing wrong?
Thanks
Niklas

Thanks, but it doesn't seem necessary to replace foreign characters. It works without replacing in one place but not in another which is confusing. I think it is something with the enconding but can't see what the difference is between the working and non-working code. In both pages I have put <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">I'd greatly appreciate any more suggestions to solve this problem.

Cirrus Logic snd-cs46xx - No soundcards found [Solved]

I have a new Thinkpad T22.
alsaconf successfully finds my Cirrus Logic CS 4614/22/24 Card, however, I need to load snd_cs46xx manually.
After loading the modules, it is visible under lsmod.
/etc/rc.d/alsa start give me an output of:
/usr/sbin/alsactl: load_state:1236: No soundcards found...
Any ideas will be appreciated

Snowman wrote:IIRC, without the sleep 5, the module is loaded but you end up with muted sound level. It seems that the problem is that udev hasn't yet created the sound devices when the alsa script tries to restore the sound volume.
I don't know if it has been fixed. Maybe moving alsa to the end of the DAEMONS array will give more time to udev to create the device so the sleep 5 won't be necessary anymore. I might test that out.
Sounds about right. I reinstalled Arch and did not add sleep 5. Now the volume is muted at startup

Mac Pro 2006 won't display anything

Hi
My mac pro won't display anything. I've had a look at this http://support.apple.com/kb/HT1573 and one of the first things I did was reset the PRAM & NVRAM. The 10.6.8 install is fully updated. The startup chime plays and fans run normally.
I have:
re-sat the RAM,
cleaned the RAM
cleaned the inside
removed all the HDDs except the main one
and even used another Raedon 4850 in place of mine.
It starts up in Target-Disk mode fine, I am using it with my iMac now but it is not the same (iMac is only dual core andhas half the RAM) I've tried several screens; DVI, VGA and HDMI all without luck. It's obviouslt out of warranty and I don't want to take it to a Apple store anyway as I ocassionally build & repair computers myself so am fine with trying anything out.
Thanks in advance,
Eric.
Things I could do/ haven't done:
Remove/ replace the Logic Board battery?
test the power I/O?
start in Safe Mode?

Whoa there, sparky !!!
Is there something you aren't mentioning?
Since there has never been a Mac Pro 4850 and you have mentioned this number twice I would like to ask...what aren't you telling us?
Did this computer work fine until one day it quit? Or did you buy/inherit/find it broken or in an unknown state?
Any GPU used in a Mac Pro needs to have EFI on it to do this basic debugging stuff. While PC WIndows BIOS cards can be used if the system is A-OK and gets to desktop, it is basically impossible to use them on a system with issues.
So, if the 4870 has a DVI and a MDP port it is real Apple one and SHOULD work.
If that card died and you have tried replacing it with a WIndows/PC 4850, then you have broken the scientific rule about only changing one thing.
Ideally you would have another Mac Pro to test your GPU in and another KNOWN GOOD GPU to test in your Mac Pro. The EFI thing greatly complicates things, unfortunately. Even a "Mac Pro" video card won't necessarily work if it is for "the other" series of Mac Pro. Ther have been in effect, 2 different Mac Pros as far as video cards go. EFI32 and EFI64. ATI/AMD cards have been largely unaffected by this but Nvidia cards MUST be for right series.

Soundcard not registering [Cirrus Logic HD Audio]

Maybe this has been said before, but I'm running the bootcamp (3.1).
I haven't seen any improvements to the driver for the soundcard.
I run two different media recording programs on my mac, but the XP side won't
recognize the soundcard (most programs enable use of recording directly from the sound card itself) on any of the programs (I've tried several different programs leading to the same outcome), it only registers the microphone.
Has anyone encountered this problem as well?
I know there's a fix posted for the realtek drivers, but the cirrus drivers still have the problem.

It's October 9th, 2010... and I can't find a solution for this. I'm using Bootcamp: Windows XP SP3. My mic works -- only playback is stuck at like 2 or 3 times slower than the regular speed. I don't know how to fix this manually and my assumption is that I need a driver. Playback voice sounds like an alien in programs I use for gaming such as "Ventrilo" -- If there is any help out there -- I could use it.
Cirrus Logic HD Audio not playing back at normal speed. Records fine. Just nobody can understand me if I talk to them via my mic.

Cirrus Logic CS 4614 audio device no support (thinkpad laptop)

Greetings,
I'm having trouble Solaris 10 3/05 x86 ; Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
bash-3.00# /usr/X11/bin/scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x7190
Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x7191
Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x104c device 0xac1b
Texas Instruments PCI1450
pci bus 0x0000 cardnum 0x02 function 0x01: vendor 0x104c device 0xac1b
Texas Instruments PCI1450
pci bus 0x0000 cardnum 0x03 function 0x00: vendor 0x10b7 device 0x6056
3Com Corporation 3c556B Hurricane CardBus
pci bus 0x0000 cardnum 0x03 function 0x01: vendor 0x10b7 device 0x1007
3Com Corporation Mini PCI 56k Winmodem
pci bus 0x0000 cardnum 0x05 function 0x00: vendor 0x1013 device 0x6003
Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x8086 device 0x7110
Intel Corp. 82371AB/EB/MB PIIX4 ISA
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x8086 device 0x7111
Intel Corp. 82371AB/EB/MB PIIX4 IDE
pci bus 0x0000 cardnum 0x07 function 0x02: vendor 0x8086 device 0x7112
Intel Corp. 82371AB/EB/MB PIIX4 USB
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x8086 device 0x7113
Intel Corp. 82371AB/EB/MB PIIX4 ACPI
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8c12
S3 Inc. 86C270-294 Savage/IX-MVEdited by: hede1 on Sep 6, 2010 6:07 PM

Snowman wrote:IIRC, without the sleep 5, the module is loaded but you end up with muted sound level. It seems that the problem is that udev hasn't yet created the sound devices when the alsa script tries to restore the sound volume.
I don't know if it has been fixed. Maybe moving alsa to the end of the DAEMONS array will give more time to udev to create the device so the sleep 5 won't be necessary anymore. I might test that out.
Sounds about right. I reinstalled Arch and did not add sleep 5. Now the volume is muted at startup

My iPhone 5 won't display smart text options.

My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
I went into Settings to see if there was a component of it within Messages. I don't see anything.
Thoughts please.....
Thanks much
Ginger

Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
So I need to remember to drag up/down and now swipe.....
Thanks much!
Ginger

ITunes won't display current voice memos from my iPhone 4S. How can I tranfer this data without loosing it?, iTunes won't display current voice memos from my iPhone 4S. How can I tranfer this data without loosing it?

Please help! My iTunes won't display my voice memos from iPhone 4S when trying to sync data. Files are to large for emailing. I want to back up the files on to my computer.

JustinV72 wrote:
How do I get the audiobook onto my iphone without erasing anything?
You transfer the purchases to the computer you use to sync the iPhone. You can use a thumb drive or an external HD, etc. Read this: iTunes for Mac - How to copy purchases between computers: http://support.apple.com/kb/HT1373

I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

This could be from having restrictions enabled. Icons completely disappear when "restricted"

IMac 2.66 Radeon HD 2600 Pro: some Excel files won't display in ppt decks

Running Leopard 10.5.8 and MS Office 2004
Two iMac (8.1) 2.66 GHz with ATI Radeon HD 2600 Pro video won't display some Excel files in PowerPoint decks, but iMac 1.83 GHz Core Duo will display o.k. as will MacBook Pro, MacBook, etc. Installing a trial version of Office 2008, both iMac 2.66 GHz display the PowerPoint files o.k.
I could downgrade the users to Intel iMac 1.83 GHz, or buy two copies of Office 2008 and support them, neither of which is a great solution.
Looking for a simple fix or workaround on what seems to be a video card issue. Don't seem to see this problem or a fix on the ATI site. I've googled this but haven't run into a similar issue.

Well, Office 2008 is only $110 USD at http://www.amazon.com/Microsoft-Office-2008-Home-Student/dp/B000X86ZAS/ref=sr11?ie=UTF8&s=software&qid=1251560959&sr=8-1
That seems the least expensive solution to me.

I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

Hello All,
I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8 but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio. I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
Somebody please help. Thank you all in advance for ANY ideas you might have!

Blues Piano,
I'm not sure if this will be a help or not. I'm so Logic Pro wet behind the ears that I make newbies look experienced. However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip. While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old. I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU. I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track. Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter. Then I can select my external MIDI device in that Port selector.
I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force. To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities. To do that I right click on the track and select "Select All." Then I right click again and select "MIDI" then "MIDI Transform" then "Velocity Limiter." In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc.
I hope this helps. I envy you your Mason & Hamlin. If you need more help on this just email me at pfleischmann at mac dot com.

ITunes won't play music and won't display some of my album art.

iTunes won't play music and won't display some of my album art. I'll click play but the song wont play and some of my album art doesnt appear anymore. When I go on iTunes music store non of the pictures will appear it will just be black where a picture should be. What can i do to fix all of this?????

I am having the exact same problem and have been trying to solve it for a couple of weeks. So far I havent found a soulution. But if you get one can you please let me know? Good Luck

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. HELP!

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. Once it displayed but the presentation mode was on the big screen and the presentation I wanted to show was on my MBP screen. I have the adapter( white ones) to attached to the projector cables. I am so frsutrated...it looks so silly not to have a computer work during a presentation..
Another problem one the rare occasion that it shows on the screen is that the presentation does show just my desk top. Any ideas?
Thanks !

You often have to turn off Mirroring to be able to set the second "screen"s resolution to something reasonable. When you do, the two screens become an "Exceeded Desktop" joined along one edge, and the Arrange pane in displays prefs can allow you to specify what edge. Initially, it will show a vacant extension of the built-in screen's desktop.
The mouse moves freely across that shared edge, and can allow you to drag the presentation window across to the the projector screen and re-size it to fit.

2x iMac G5: Both Logic Board and Display Problems, Warrenty?

Hello,
Thank you for looking at this topic.
I am Jeroen from The Netherlands and proud owner of several Mac Mini's, iMac's and Macbook's. I have 2times the iMac G5, a beautiful machine, but both not working since 2 months.
I have two times the iMac G5 with iSight, both have logic board and display problems.
The first iMac doenst start at all, black screen, i hear the chime, but nothing happening. After a minute i see one horizantal white stripe but nothing happens.
The second iMac has weird horizantal stripes also, but the computer starts. It gives a finder and questionmark icon. After a while the fans go crazy.
Both these symptons are widely known on the internet. I would like to get this fixed, but prices are crazy. And because this is a common issue I would expect to get this fixed for no costs. I have contacted several Apple resellers but they shown me high prices and bad services. On these forums I've saw people in the USA who get this fixed free of charge.
Does anyone has any advice for me? I'll call apple USA this morning.
Thankyou for ur time.

Welcome to Apple Discussions.
I know of no repair extension authorization which provides for the repair of either computer you describe beyond its original 12 month period of coverage. If either machine is covered by a warranty extension program provided by AppleCare, then the parts, labor or both required to replace the defective components may be offered at no charge to you. Final determination of eligibility is made at the part level by authorized Apple service providers or dealers and by the specific serial number of the machine submitted for service.
Absent a warranty extension, however, it is quite likely that you will have to pay for the repairs is you elect to have them performed.

Windows 8.1 default video driver only displays 1024x768 on Satellite A665D-S6051

My laptop came with Windows 7 Home Premium. I upgraded to Windows 8.0 and had driver poblems. The Windows 8 installation was getting a bit buggy after 18-mos so I finally decided to upgrade to 8.1. I did a format and clean install of 8.0, then updated software before installing 8.1 upgrade. After upgrade Windows 8.1 used a default driver that only displays 1024x768 instead of 1366x768. I tried to install video drivers from AMD website and crashed the new Windows 8.1 installation. I'm back running 8.0 with no problems. Anyone know where I get the correct driver for my A665D-S6051? This is an AMD Pheonom II Quad Core processor with ATI Mobility Radeon HD 4200 series video display.
Solved!
Go to Solution.

Satellite A665D-S6051 (PSAX0U-008004)
Your model is supported by Toshiba for upgrade to Windows 8, but not to Windows 8.1.
Computers with Windows 7 pre-installed that are supported by Toshiba for update to Windows 8.1
Windows 8.0 will not be supported by Microsoft after January 12, 2016.
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
(Some would kill to downgrade to Windows 7!)
-Jerry

Cirrus Logic won't display 1024x768

Similar Messages

Maybe you are looking for