Cisco 2911 security slot
Does Cisco 2911 K9 router have a security slot to put a anti-theft cable into?
Thanks.
No they do not appear to have a security slot
http://www.cisco.com/c/en/us/td/docs/routers/access/2900/hardware/installation/guide/Hardware_Installation_Guide/Overview.html#wp1082742
I cant check a couple 2911's in person and make sure for you tomorrow.
Similar Messages
-
CME B-ACD on Cisco 2911 with IOS 15.2(4)M5 not working
Hi Folks,
I am currently setting up CME version 9.1 with B-ACD (app-b-acd-aa-3.0.0.2.tcl & app-b-acd-3.0.0.2.tcl), running on
Cisco 2911 with IOS ver 15.2(4)M5, this is for lab purposes.
Below is my CME & B-ACD configuration :
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
h225 listen-port 1820
no call service stop
sip
bind control source-interface Vlan400
bind media source-interface Vlan400
registrar server expires max 600 min 60
voice register global
mode cme
source-address 172.25.202.1 port 5060
max-dn 2
max-pool 2
load 9971 sip9971.9-2-2SR1-9
authenticate register
timezone 28
time-format 24
date-format D/M/Y
tftp-path flash:
create profile sync 0004714411607756
voice register dn 1
number 3005
name br2phn2
voice register dn 2
number 3006
name br2phn4
voice register template 1
dialplan 1
voice register dialplan 1
type 7940-7960-others
pattern 1 3...
pattern 2 999
voice register pool 1
id mac 1C1D.86C4.0D6D
type 9971
number 1 dn 1
template 1
dtmf-relay rtp-nte
username 3005 password cisco
description 3214-3005
codec g711ulaw
voice register pool 2
id mac 1C1D.86C4.A574
type 9971
number 1 dn 2
template 1
dtmf-relay rtp-nte
username 3006 password cisco
description 3214-3006
codec g711ulaw
voice hunt-group 1 parallel
list 3002,3006
pilot 3210
application
service aa flash:/app-b-acd-aa-3.0.0.2.tcl
paramspace english index 1
param number-of-hunt-grps 2
param handoff-string aa
paramspace english language en
param max-time-vm-retry 2
param aa-pilot 3500
paramspace english location flash://
param second-greeting-time 60
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param voice-mail 3001
param max-time-call-retry 90
param service-name queue
service aa-drop flash:/app-b-acd-aa-3.0.0.2.tcl
paramspace english index 1
param service-name queue
param drop-through-option 2
param second-greeting-time 60
paramspace english language en
param max-time-vm-retry 2
param max-time-call-retry 90
param voice-mail 3001
paramspace english location flash://
param aa-pilot 3501
param number-of-hunt-grps 1
param handoff-string aa-drop
param call-retry-timer 15
service queue flash:/app-b-acd-3.0.0.2.tcl
param queue-len 15
param aa-hunt10 3006
param queue-manager-debugs 1
param number-of-hunt-grps 2
param aa-hunt2 3210
interface Loopback0
ip address 172.25.110.3 255.255.255.255
ip ospf network point-to-point
h323-gateway voip interface
h323-gateway voip id Spain ipaddr 172.25.110.1 1719
h323-gateway voip h323-id BR2-RTR
h323-gateway voip tech-prefix 1#
h323-gateway voip bind srcaddr 172.25.110.3
interface Vlan400
ip address 172.25.202.1 255.255.255.0
ip pim dense-mode
dial-peer voice 3500 voip
service aa
destination-pattern 3500
session target ipv4:172.25.110.3
incoming called-number 3500
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
dial-peer voice 3501 voip
service aa-drop
destination-pattern 3501
session target ipv4:172.25.110.3
incoming called-number 3501
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
telephony-service
no auto-reg-ephone
max-ephones 2
max-dn 2 no-reg both
ip source-address 172.25.110.3 port 2000
cnf-file location flash:
load 7965 term65.default.loads
time-zone 28
time-format 24
date-format dd-mm-yy
max-conferences 8 gain -6
moh "music-on-hold.au"
web admin system name admin password cisco
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 14 2014 05:54:44
ephone-template 1
softkeys connected Endcall Hold Park Trnsfer Acct Flash
ephone-dn 1 octo-line
number 3001 no-reg both
description 3214-3001
name br2phn1
ephone-dn 2 octo-line
number 3002 no-reg both
description 3214-3002
name br2phn3
ephone 1
device-security-mode none
mac-address 189C.5DB6.D303
ephone-template 1
max-calls-per-button 5
busy-trigger-per-button 3
type 7965
button 1:1
ephone 2
device-security-mode none
description 3214-3002
mac-address 984B.E194.FDDD
ephone-template 1
max-calls-per-button 5
busy-trigger-per-button 3
type 7960
button 1:2
Problem :
1. When I test call from CME Phone both SIP and SCCP Phone by dial 3500 or 3501, I get the busy tone.
2. Debug voip dial-peer, match with dial-peer voice 3500 for (aa service) & 3501 for (aa-drop service).
3. Debug voice application script, show nothing.
Is there something wrong with my configuration ?
Rgds
NovriHi Novriadi,
In your configuration
service aa flash:/app-b-acd-aa-3.0.0.2.tcl
service queue flash:/app-b-acd-3.0.0.2.tcl
paramspace english location flash://
Remove "/" and "//" from the configuration
Then use the call application voice load command in privileged EXEC mode to reload the scripts.
Router# call application voice load aa
Router# call application voice load queue
Router# call application voice load aa-drop
You can refer to following document as well for more info
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/bacd/configuration/guide/cme40tcl/40bacd.html#wp1018270
Please find the sample configuration that is required to configure b-acd in CME for reference.
telephony-service
moh music-on-hold.au
multicast moh 239.1.1.1 port 2000
application
service queue flash:app-b-acd-2.1.0.0.tcl
param number-of-hunt-grps 2
param aa-hunt2 1111
param aa-hunt3 1222
param queue-len 15
param queue-manager-debugs 1
service aa flash:app-b-acd-aa-2.1.0.0.tcl
paramspace english index 1
paramspace english language en
paramspace english location flash:
param service-name queue
param handoff-string aa
param aa-pilot 8005550123
param welcome-prompt _bacd_welcome.au
param number-of-hunt-grps 2
param dial-by-extension-option 1
param second-greeting-time 60
param call-retry-timer 15
param max-time-call-retry 700
param max-time-vm-retry 2
param voice-mail 5003
dial-peer voice 222 voip
service aa
destination-pattern 8005550123
session target ipv4:192.168.1.1
incoming called-number 8005550123
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
Thanks & Regards,
Mudit Mathur -
Hardware Needed for Cisco 2911 as a console server
Hi,
We need to setup Cisco 2911 router as a console server for OOB (Out of band) connectivity to console of each DC device (upto 20 devices) Could someone please respond to the following questions we had:
1. What interface module can we install on the 2911 ISR for this purpose?
2. What cable (part number please) will go to the that 2911-ISR interface slot and then we can connect the consoel ports of out network devices to that cable.
It needs to be something similar to the cisco octal cable which I know we used for Cisco 2500 series for console purposes to other devices. But not sure about Cisco 2911.
I would highly appreciate your information and help.
Thanks
LovleenYou would need an interface providing asynchronous serial ports. Something like the HWIC-8A or the HWIC-16A. Needing 20 ports you will most likely use one of each type (having then 24 ports).
The cable to connect to the HWIC is the CAB-HD8-ASYNC. If you attach routers and switches console ports directly to the RJ45 plugs everything is fine. If you have other types of serial ports to serve (DB-9 or DB-25) then you need the according adapters. I don't know if they have product numbers...
Or to have it all on one single PDF follow this link
BR
Björn -
Cisco 2911/K9 Block P2P / Torrent
Dear Experts,
We currently have a Cisco 2911/K9 router and I feel there's a chunk of people who are eating up our bandwidth.
I am no expert in this area, but I have searched endlessly and haven't been able to find much information on how to resolve this issue on this router or if it is even possible.
Could someone shed some light onto this? Is it possible with this current router and no extra hardware (maybe extra software) to somehow monitor/block/de-prioritize the P2P/Torrent users?
Thank you!
Kind regards,
PIUWithout any additional license or equipment, that's very hard to achieve.
The best way to solve that problem is to use an ASA-NGFW instead of the IOS-router.
If you have to stick with the router you could use Cisco Web Security (CWS) formaly known as Scansafe. But that needs also an additional license.
With only the router you could try some dirty hacks. For example you can deny all unwanted IPs (that of Facebook, Youtube ...) in an ACL. But that is very hard to manage. Or you could control the DNS-communication in a way that your DNS-server return an internal IP of your own webserver for all the unwanted domains.
But all in all, you are using the wrong tool for that problem. -
Cisco 2911 stops responding after a period of time
I have a Cisco 2911 router with 4 T1 connections. Two are set as a multilink and the other two are for two other locations. The router will run fine, but after a month I cannot ping the gigabit ethernet 0/0 interface. I would have to manually reboot the router to get it to respond again. Before I noticed a lot of interface discards which would shutdown the 2911 and a manual reboot would be needed, but for this time it isn't the case. Where would I start with this the memory and cpu usage are fine.
Here is the config:
Current configuration : 2905 bytes
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 2911
boot-start-marker
boot-end-marker
card type t1 0 0
card type t1 0 1
no aaa new-model
clock timezone gmt -5
clock summer-time cdt recurring
no network-clock-participate wic 0
no network-clock-participate wic 1
no ipv6 cef
ip source-route
ip cef
multilink bundle-name authenticated
license udi pid CISCO2911/K9 sn FTX1513ALLS
controller T1 0/0/0 -- Multilink
cablelength long 0db
channel-group 0 timeslots 1-24
controller T1 0/0/1 -- Multilink
clock source internal
cablelength long 0db
channel-group 0 timeslots 1-24
controller T1 0/1/0
clock source internal
cablelength long 0db
channel-group 3 timeslots 1-24
controller T1 0/1/1
clock source internal
cablelength long 0db
channel-group 2 timeslots 1-24
buffers middle permanent 200
buffers middle max-free 230
buffers middle min-free 50
buffers big permanent 75
buffers big max-free 200
buffers big min-free 15
buffers verybig permanent 20
buffers verybig max-free 20
buffers tune automatic
interface Multilink1
ip address 192.168.200.1 255.255.255.252
ip flow ingress
ip flow egress
load-interval 30
ppp multilink
ppp multilink group 1
ppp multilink fragment disable
no cdp enable
hold-queue 4000 out
interface GigabitEthernet0/0
ip address 10.10.99.1 255.255.255.0
ip flow ingress
ip flow egress
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
hold-queue 40 out
interface Serial0/0/1:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
hold-queue 40 out
interface Serial0/1/0:3
ip address 192.168.1.2 255.255.255.0
ip flow ingress
ip flow egress
load-interval 60
no fair-queue
hold-queue 4000 out
interface Serial0/1/1:2
ip address 192.168.8.2 255.255.255.0
ip flow ingress
ip flow egress
load-interval 30
no fair-queue
hold-queue 4000 out
ip forward-protocol nd
no ip http server
no ip http secure-server
ip flow-cache timeout active 1
ip flow-export source GigabitEthernet0/0
ip flow-export version 5
ip flow-export destination 10.10.14.49 2055
ip route 0.0.0.0 0.0.0.0 10.10.99.10
ip route 10.10.17.0 255.255.255.0 192.168.1.1
ip route 10.10.25.0 255.255.255.0 192.168.8.1
ip route 10.10.94.0 255.255.254.0 192.168.200.2
snmp-server community ipBalance RO
snmp-server community SolarWinds RO
control-plane
line con 0
logging synchronous
line aux 0
line vty 0 4
session-timeout 60
privilege level 15
password 7
logging synchronous
login
transport input telnet
scheduler allocate 20000 1000
endKishore,
I just hard coded the gigabit 0/0 to 1000 full duplex. The interface errors were occuring on the serial interfaces due to someone doing videoconferencing and trying to use more than 1.5Mbps over the T1. Once they throttled down the video conferencing equipment, the errors seemed to go away.
IOS is
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
For syslogs I enabled:
logging trap notifications
logging IP of syslog server
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone year -
Cisco 2911 Voice Gateway SIP PSTN Calls Fail
Hello All,
I am having trouble with outboud SIP PSTN calls through a Cisco 2911 Voice Gateway. 2911 VG terminates PSTN SIP Traffic and connects to Avaya CS1000M via QSIG PRI Trunks. When calls are attempted outbound fron the PBX the caller gets a fast busy. Debug ISDN q931 shows the call hitting the 2911 properly, debug voip ccapi inout shows the call matching the correct dial peers and debug ccsip shows the invite to the PSTN Provider SBC, however within the invite the "from" address incorrectly shows the calling number with the provider SBC address (see below). does anyone have any insight on how to correct this? Attached are VG config and Debug isdn q931, voip ccapi inout, ccsip messages and ccsip call. Thanks in advance for any help!!
From: <sip:[email protected]>:tag=6166CDC4-882
To: <sip:[email protected]>
Shawn C. Smithi have same problem my cucm ip is 192.168.200.53
my Voice Gateway is SIP by ip 192.168.200.86 for internal
and 172.29.7.94
and my SIP Server is 10.208.9.69
if its oky can yuo take a look at my problem please
this is the syslog from debug
May 30 20:19:34.284: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.200.53:5060;branch=z9hG4bK3bd451bf17e0
From: "Aysar Mohamed" <sip:[email protected]>;tag=37693~244641b0-36ac-434c-91c1-823f25a68b28-18299026
To: <sip:[email protected]>
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence, kpml
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Call-Info: <sip:192.168.200.53:5060>;method="NOTIFY;Event=telephone-event;Duration=500"
Cisco-Guid: 3047462016-0000065536-0000004549-0902342848
Session-Expires: 1800
P-Asserted-Identity: "Aysar Mohamed" <sip:[email protected]>
Remote-Party-ID: "Aysar Mohamed" <sip:[email protected]>;party=calling;screen=yes;privacy=off
Contact: <sip:[email protected]:5060>
Max-Forwards: 70
Content-Length: 0
May 30 20:19:34.284: //-1/B5A494800000/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=2217156
----- ccCallInfo IE subfields -----
cisco-ani=2217156
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=90555769123
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
May 30 20:19:34.288: //-1/B5A494800000/CCAPI/cc_api_call_setup_ind_common:
Interface=0x30CF41D4, Call Info(
Calling Number=2217156,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=90555769123(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,
Incoming Dial-peer=0, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=465
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
May 30 20:19:34.288: :cc_get_feature_vsa malloc success
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
May 30 20:19:34.288: cc_get_feature_vsa count is 1
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
May 30 20:19:34.288: :FEATURE_VSA attributes are: feature_name:0,feature_time:832953048,feature_id:85
May 30 20:19:34.288: //465/B5A494800000/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=2217156(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=90555769123(TON=Unknown, NPI=Unknown))
May 30 20:19:34.288: //465/B5A494800000/CCAPI/cc_process_call_setup_ind:
Event=0x2B82D890
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 90555769123
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCallSetContext:
Context=0x2ABC2E44
May 30 20:19:34.288: //465/B5A494800000/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 465 with tag 0 to app "_ManagedAppProcess_Default"
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=TRUE, Mode=0,
Outgoing Dial-peer=802, Params=0x2ABC19D4, Progress Indication=NULL(0)
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCheckClipClir:
In: Calling Number=2217156(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCheckClipClir:
Out: Calling Number=2217156(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCallSetupRequest:
Destination Pattern=9T, Called Number=0555769123, Digit Strip=FALSE
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccCallSetupRequest:
Calling Number=2217156(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=0555769123(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=Aysar Mohamed
Account Number=2217156, Final Destination Flag=TRUE,
Guid=B5A49480-0001-0000-0000-11C535C8A8C0, Outgoing Dial-peer=802
May 30 20:19:34.288: //465/B5A494800000/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=2217156
----- ccCallInfo IE subfields -----
cisco-ani=2217156
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=0555769123
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
May 30 20:19:34.288: //465/B5A494800000/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x30CF41D4, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=2217156,(Calling Name=Aysar Mohamed)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=0555769123(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=802, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
May 30 20:19:34.288: :cc_get_feature_vsa malloc success
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
May 30 20:19:34.288: cc_get_feature_vsa count is 2
May 30 20:19:34.288: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
May 30 20:19:34.288: :FEATURE_VSA attributes are: feature_name:0,feature_time:832952824,feature_id:86
May 30 20:19:34.292: //466/B5A494800000/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
May 30 20:19:34.292: //466/B5A494800000/CCAPI/ccCallSetContext:
Context=0x2ABC1984
May 30 20:19:34.292: //465/B5A494800000/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=802
May 30 20:19:34.292: //466/B5A494800000/CCAPI/cc_api_call_proceeding:
Interface=0x30CF41D4, Progress Indication=NULL(0)
May 30 20:19:34.292: //465/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.200.53:5060;branch=z9hG4bK3bd451bf17e0
From: "Aysar Mohamed" <sip:[email protected]>;tag=37693~244641b0-36ac-434c-91c1-823f25a68b28-18299026
To: <sip:[email protected]>
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
May 30 20:19:34.292: //466/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 172.29.7.94:5060;branch=z9hG4bK461C
Remote-Party-ID: "Aysar Mohamed" <sip:[email protected]>;party=calling;screen=yes;privacy=off
From: "Aysar Mohamed" <sip:[email protected]>;tag=7394E4-1898
To: <sip:[email protected]>
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3047462016-0000065536-0000004549-0902342848
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1401481174
Contact: <sip:[email protected]:5060>
Call-Info: <sip:172.29.7.94:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: kpml, telephone-event
Max-Forwards: 69
Session-Expires: 1800
Content-Length: 0
May 30 20:19:34.300: //466/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 172.29.7.94:5060;branch=z9hG4bK461C
Call-ID: [email protected]
From: "Aysar Mohamed"<sip:[email protected]>;tag=7394E4-1898
To: <sip:[email protected]>
CSeq: 101 INVITE
Content-Length: 0
May 30 20:19:34.612: //466/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 172.29.7.94:5060;branch=z9hG4bK461C
Record-Route: <sip:10.208.9.69:5060;transport=udp;lr>
Call-ID: [email protected]
From: "Aysar Mohamed"<sip:[email protected]>;tag=7394E4-1898
To: <sip:[email protected]>;tag=sbc0806eppk5yip-CC-57
CSeq: 101 INVITE
Contact: <sip:[email protected]:5060;user=phone>
Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,REGISTER,INFO,PRACK,SUBSCRIBE,NOTIFY,UPDATE,MESSAGE,REFER
Content-Length: 328
Content-Type: application/sdp
v=0
o=- 17192647 17192647 IN IP4 10.208.9.69
s=SBC call
c=IN IP4 10.208.9.69
t=0 0
m=audio 39910 RTP/AVP 8 0 102 102 18 116
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:102 AMR/8000
a=rtpmap:102 AMR/8000
a=rtpmap:18 G729/8000
a=rtpmap:116 telephone-event/8000
a=ptime:5
a=fmtp:116 0-15
a=fmtp:18 annexb=yes
May 30 20:19:34.612: %SIP-3-UNSUPPORTED: Unsupported ptime value
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_caps_ind:
Destination Interface=0x0, Destination Call Id=-1, Source Call Id=466,
Caps(Codec=0x2, Fax Rate=0x2, Vad=0x1,
Modem=0x0, Codec Bytes=160, Signal Type=2)
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=1000(ms), Fax Nom=300(ms))
May 30 20:19:34.612: //465/B5A494800000/CCAPI/cc_api_caps_ack:
Destination Interface=0x0, Destination Call Id=-1, Source Call Id=465,
Caps(Codec=g729r8(0x4), Fax Rate=FAX_RATE_VOICE(0x2), Vad=ON(0x2),
Modem=OFF(0x0), Codec Bytes=20, Signal Type=2, Seq Num Start=3882)
May 30 20:19:34.612: //465/B5A494800000/CCAPI/cc_api_caps_ack:
Destination Interface=0x0, Destination Call Id=-1, Source Call Id=465,
Caps(Codec=g729r8(0x4), Fax Rate=FAX_RATE_VOICE(0x2), Vad=ON(0x2),
Modem=OFF(0x0), Codec Bytes=20, Signal Type=2, Seq Num Start=3882)
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_event_indication:
Event=170, Call Id=466
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_event_indication:
Event Is Sent To Conferenced SPI(s) Directly
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_event_indication:
Event=98, Call Id=466
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_event_indication:
Event Is Sent To Conferenced SPI(s) Directly
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_call_cut_progress:
Interface=0x30CF41D4, Progress Indication=INBAND(8), Signal Indication=SIGNAL RINGBACK(1),
Cause Value=0
May 30 20:19:34.612: //466/B5A494800000/CCAPI/cc_api_call_cut_progress:
Call Entry(Responsed=TRUE)
May 30 20:19:34.612: //465/B5A494800000/CCAPI/ccCallCutProgress:
Progress Indication=INBAND(8), Signal Indication=SIGNAL RINGBACK(1), Cause Value=0
Voice Call Send Alert=FALSE, Call Entry(Alert Sent=FALSE)
May 30 20:19:34.612: //465/B5A494800000/CCAPI/ccCallCutProgress:
Call Entry(Responsed=TRUE)
May 30 20:19:34.612: //465/B5A494800000/CCAPI/ccConferenceCreate:
(confID=0x30C11410, callID1=0x1D1, gcid=8C9E3127-E76E11E3-8274BE8C-EC3B12A0, tag=0x0)
May 30 20:19:34.616: //466/B5A494800000/CCAPI/ccConferenceCreate:
(confID=0x30C11410, callID2=0x1D2, gcid=8C9E3127-E76E11E3-8274BE8C-EC3B12A0, tag=0x0)
May 30 20:19:34.616: //465/B5A494800000/CCAPI/ccConferenceCreate:
Conference Id=0x30C11410, Call Id1=465, Call Id2=466, Tag=0x0
May 30 20:19:34.616: //465/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
May 30 20:19:34.616: cc_api_get_xcode_stream : 4702
May 30 20:19:34.616: //466/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
May 30 20:19:34.616: cc_api_get_xcode_stream : 4702
May 30 20:19:34.616: //465/B5A494800000/CCAPI/ccConferenceCreate:
May 30 20:19:34.616: ccConferenceCreate: ret1=0, codecMask1=2, bytes1=160, negot1=0, dtmf1=0
ret2=0, codecMask2=2, bytes2=160, negot2=1, dtmf2=6,
tx_dynamic_pt1=0, rx_dynamic_pt1=0, codec_mode1=0, params_bitmap1 =0
tx_dynamic_pt2=8, rx_dynamic_pt2=8, codec_mode2=0, params_bitmap2 =0
May 30 20:19:34.616: //465/B5A494800000/CCAPI/ccConferenceCreate:
delay media to slow start case, codec negotation is not done
May 30 20:19:34.616: //465/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
May 30 20:19:34.616: cc_api_get_xcode_stream : 4702
May 30 20:19:34.616: //465/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
May 30 20:19:34.616: cc_api_get_xcode_stream : 4702
May 30 20:19:34.616: //465/B5A494800000/CCAPI/cc_api_bridge_done:
Conference Id=0x16, Source Interface=0x30CF41D4, Source Call Id=465,
Destination Call Id=466, Disposition=0x0, Tag=0x0
May 30 20:19:34.616: //466/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
May 30 20:19:34.616: cc_api_get_xcode_stream : 4702
May 30 20:19:34.616: //466/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
May 30 20:19:34.616: cc_api_get_xcode_stream : 4702
May 30 20:19:34.616: //466/B5A494800000/CCAPI/cc_api_bridge_done:
Conference Id=0x16, Source Interface=0x30CF41D4, Source Call Id=466,
Destination Call Id=465, Disposition=0x0, Tag=0x0
May 30 20:19:34.616: //465/B5A494800000/CCAPI/cc_generic_bridge_done:
Conference Id=0x16, Source Interface=0x30CF41D4, Source Call Id=466,
Destination Call Id=465, Disposition=0x0, Tag=0x0
May 30 20:19:34.616: //465/B5A494800000/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x16, Destination Call Id=466)
May 30 20:19:34.616: //466/B5A494800000/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x16, Destination Call Id=465)
May 30 20:19:34.616: //465/B5A494800000/CCAPI/cc_process_notify_bridge_done:
Conference Id=0x16, Call Id1=465, Call Id2=466
May 30 20:19:34.616: //465/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 192.168.200.53:5060;branch=z9hG4bK3bd451bf17e0
From: "Aysar Mohamed" <sip:[email protected]>;tag=37693~244641b0-36ac-434c-91c1-823f25a68b28-18299026
To: <sip:[email protected]>;tag=739628-1BDB
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]>;party=called;screen=yes;privacy=off
Contact: <sip:[email protected]:5060>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 233
v=0
o=CiscoSystemsSIP-GW-UserAgent 2639 5276 IN IP4 192.168.200.86
s=SIP Call
c=IN IP4 192.168.200.86
t=0 0
m=audio 18288 RTP/AVP 8 0 19
c=IN IP4 192.168.200.86
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:19 CN/8000
May 30 20:19:34.680: //466/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 500 Server Internal Error
Via: SIP/2.0/UDP 172.29.7.94:5060;branch=z9hG4bK461C
Record-Route: <sip:10.208.9.69:5060;transport=udp;lr>
Call-ID: [email protected]
From: "Aysar Mohamed"<sip:[email protected]>;tag=7394E4-1898
To: <sip:[email protected]>;tag=sbc0806eppk5yip-CC-57
CSeq: 101 INVITE
Reason: Q.850;cause=127;text="interworking unspecified"
Warning: 399 - "SoftX3000 R601-CCU Rel POS:[3103] Release from CR"
Content-Length: 0
May 30 20:19:34.680: //466/B5A494800000/CCAPI/cc_api_call_disconnected:
Cause Value=41, Interface=0x30CF41D4, Call Id=466
May 30 20:19:34.680: //466/B5A494800000/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=41, Retry Count=0)
May 30 20:19:34.680: //465/B5A494800000/CCAPI/ccCallReleaseResources:
release reserved xcoding resource.
May 30 20:19:34.680: //466/B5A494800000/CCAPI/ccCallSetAAA_Accounting:
Accounting=0, Call Id=466
May 30 20:19:34.680: //465/B5A494800000/CCAPI/ccConferenceDestroy:
Conference Id=0x16, Tag=0x0
May 30 20:19:34.680: //465/B5A494800000/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x16, Source Interface=0x30CF41D4, Source Call Id=465,
Destination Call Id=466, Disposition=0x0, Tag=0x0
May 30 20:19:34.680: //466/B5A494800000/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x16, Source Interface=0x30CF41D4, Source Call Id=466,
Destination Call Id=465, Disposition=0x0, Tag=0x0
May 30 20:19:34.680: //465/B5A494800000/CCAPI/cc_generic_bridge_done:
Conference Id=0x16, Source Interface=0x30CF41D4, Source Call Id=466,
Destination Call Id=465, Disposition=0x0, Tag=0x0
May 30 20:19:34.680: //466/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 172.29.7.94:5060;branch=z9hG4bK461C
From: "Aysar Mohamed" <sip:[email protected]>;tag=7394E4-1898
To: <sip:[email protected]>;tag=sbc0806eppk5yip-CC-57
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: kpml, telephone-event
Content-Length: 0
May 30 20:19:34.684: //466/B5A494800000/CCAPI/ccCallDisconnect:
Cause Value=41, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=41)
May 30 20:19:34.684: //466/B5A494800000/CCAPI/ccCallDisconnect:
Cause Value=41, Call Entry(Responsed=TRUE, Cause Value=41)
May 30 20:19:34.684: //466/B5A494800000/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x30CF41D4, Tag=0x0, Call Id=466,
Call Entry(Disconnect Cause=41, Voice Class Cause Code=0, Retry Count=0)
May 30 20:19:34.684: //466/B5A494800000/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
May 30 20:19:34.684: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
May 30 20:19:34.684: :cc_free_feature_vsa freeing 31A5D9F0
May 30 20:19:34.684: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
May 30 20:19:34.684: vsacount in free is 1
May 30 20:19:34.684: //465/B5A494800000/CCAPI/ccCallDisconnect:
Cause Value=41, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
May 30 20:19:34.684: //465/B5A494800000/CCAPI/ccCallDisconnect:
Cause Value=41, Call Entry(Responsed=TRUE, Cause Value=41)
May 30 20:19:34.684: //465/B5A494800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 192.168.200.53:5060;branch=z9hG4bK3bd451bf17e0
From: "Aysar Mohamed" <sip:[email protected]>;tag=37693~244641b0-36ac-434c-91c1-823f25a68b28-18299026
To: <sip:[email protected]>;tag=739628-1BDB
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=41
Content-Length: 0
May 30 20:19:34.684: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.200.53:5060;branch=z9hG4bK3bd451bf17e0
From: "Aysar Mohamed" <sip:[email protected]>;tag=37693~244641b0-36ac-434c-91c1-823f25a68b28-18299026
To: <sip:[email protected]>;tag=739628-1BDB
Date: Fri, 30 May 2014 20:19:34 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence, kpml
Content-Length: 0
May 30 20:19:34.688: //465/B5A494800000/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x30CF41D4, Tag=0x0, Call Id=465,
Call Entry(Disconnect Cause=41, Voice Class Cause Code=0, Retry Count=0)
May 30 20:19:34.688: //465/B5A494800000/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
May 30 20:19:34.688: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
May 30 20:19:34.688: :cc_free_feature_vsa freeing 31A5DAD0
May 30 20:19:34.688: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
May 30 20:19:34.688: vsacount in free is 0
May 30 20:19:36.044: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
OPTIONS sip:172.29.7.94:5060 SIP/2.0
Via: SIP/2.0/UDP 10.208.9.69:5060;branch=z9hG4bKmisco3ykfiooegpygsphkocp1T20326
Call-ID: isbcfemyk1p1mkteets1tcmi53eeehfhikcp@SoftX3000
From: <sip:172.29.7.94:5060>;tag=sbc0803k1pyk51o
To: <sip:172.29.7.94>
CSeq: 1 OPTIONS
Max-Forwards: 70
Content-Length: 0
May 30 20:19:36.048: //467/8DAABF6C8278/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.208.9.69:5060;branch=z9hG4bKmisco3ykfiooegpygsphkocp1T20326
From: <sip:172.29.7.94:5060>;tag=sbc0803k1pyk51o
To: <sip:172.29.7.94>;tag=739BBC-1CE2
Date: Fri, 30 May 2014 20:19:36 GMT
Call-ID: isbcfemyk1p1mkteets1tcmi53eeehfhikcp@SoftX3000
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1 OPTIONS
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Accept: application/sdp
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Content-Type: application/sdp
Content-Length: 446
v=0
o=CiscoSystemsSIP-GW-UserAgent 3496 1601 IN IP4 172.29.7.94
s=SIP Call
c=IN IP4 172.29.7.94
t=0 0
m=audio 0 RTP/AVP 18 0 8 9 4 2 15
c=IN IP4 172.29.7.94
m=image 0 udptl t38
c=IN IP4 172.29.7.94
a=T38FaxVersion:0
a=T38MaxBitRate:9600
a=T38FaxFillBitRemoval:0
a=T38FaxTranscodingMMR:0
a=T38FaxTranscodingJBIG:0
a=T38FaxRateManagement:transferredTCF
a=T38FaxMaxBuffer:200
a=T38FaxMaxDatagram:320
a=T38FaxUdpEC:t38UDPRedundancy
My SIP GW internal ip address is 192.168.200.86
and the Public IP is : 172.29.7.94
My CUCM is 192.168.200.53
my GW Config is :
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
registrar server
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 3
rule 1 /^9\(\)/ /\1/
voice translation-rule 4
rule 4 /^22217/ /7/
rule 5 /^2217/ /7/
rule 6 /^022217/ /7/
rule 7 /^0122217/ /7/
voice translation-rule 5
rule 1 /^5/ /905/
rule 2 /^1/ /901/
rule 3 /^2/ /902/
rule 4 /^3/ /903/
rule 5 /^4/ /904/
rule 6 /^6/ /906/
rule 7 /^7/ /907/
rule 8 /^8/ /908/
rule 10 /^00/ /900/
rule 11 /'+'/ /900/
voice translation-profile OUT
translate called 3
voice translation-profile REDIAL
translate calling 5
voice translation-profile SIP-NEW
translate called 4
application
service mva http://192.168.200.53:8080/ccmivr/pages/IVRMainpage.vxml
service ccm http://192.168.200.53:8080/ccmivr/pages/IVRMainpage.vxml
license udi pid CISCO2921/K9 sn FCZ164960G0
hw-module pvdm 0/0
hw-module pvdm 0/1
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 192.168.200.86 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 172.29.7.94 255.255.255.252
duplex auto
speed auto
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip route 0.0.0.0 0.0.0.0 192.168.200.1
ip route 10.208.9.0 255.255.255.0 172.29.7.93
access-list 23 permit 10.10.10.0 0.0.0.7
control-plane
mgcp profile default
sccp local GigabitEthernet0/0
sccp ccm 192.168.200.53 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register NAGHI-MTP
dspfarm profile 2 mtp
codec g711alaw
maximum sessions hardware 25
associate application SCCP
dial-peer voice 802 voip
description ** SIP TO STC **
translation-profile outgoing OUT
destination-pattern 9T
session protocol sipv2
session target ipv4:10.208.9.69:5060
session transport udp
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay sip-notify rtp-nte sip-kpml
no vad
dial-peer voice 811 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.53
incoming called-number 022217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 812 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.53
incoming called-number 22217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 813 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.53
incoming called-number 2217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 814 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
preference 1
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.63
incoming called-number 022217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 815 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
preference 1
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.63
incoming called-number 22217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 816 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
preference 1
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.63
incoming called-number 2217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 817 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.53
incoming called-number 0122217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
dial-peer voice 818 voip
description ** SIP INCOMING FROM STC **
translation-profile incoming SIP-NEW
translation-profile outgoing REDIAL
preference 1
destination-pattern 7...
session protocol sipv2
session target ipv4:192.168.200.63
incoming called-number 0122217...$
dtmf-relay sip-notify rtp-nte sip-kpml
codec g711alaw
Please i need ur help ASAP -
Hello,
Have what I hope is a simple question for you. How best to connect my 250 Mbit/s internet circuit to a newly arrived Cisco 2911? We're changing over our internet circuit from being managed by AT&T (includes router) to an unmanaged one (we provide router). The existing demarc extension terminates in a mult-mode LC connector and connects to a SFP module in the managed AT&T router.
Was sent a 2911 with no additional modules or cards. I have some GLC-SX-MM= SFP modules, but did not see any SFP slots in the 2911. Do I have to go with a higher router, like the 2921? Or are there SFP carrier cards or other modules we can use from Cisco? Thanks.
ScottFor the ISR G2, like the 2900, you should be looking for the EHWIC-1GE-SFP-CU.
How best to connect my 250 Mbit/s internet circuit to a newly arrived Cisco 2911?
However, the main question is this: Can a 2911 handle 250 Mbps bandwidth? The answer is no. The 2911 can handle 180.73 Mbps of traffic. This value is express in HALF duplex and without any encryption.
I believe a 3925E can support 250 Mbps of traffic (full dupex, full encryption). -
Configuration of Cisco 2911 for Asterisk
Hi all
I use Cisco 2911 for Asterisk phone system communicate with external.
However, sometime I can make call in and out. Sometime, just call in or out. Sometime, cannot make any call.
I think it is the NAT, PAT and ACL in Cisco 2911 problem. This Cisco is also a gateway to internet for users.
Please any advice
Thanks a lot
Here is the configuration:
Router#show run
Building configuration...
Current configuration : 1981 bytes
! Last configuration change at 20:06:06 UTC Thu Nov 14 2013
! NVRAM config last updated at 15:04:59 UTC Tue Nov 5 2013
! NVRAM config last updated at 15:04:59 UTC Tue Nov 5 2013
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 xxxxx
no aaa new-model
memory-size iomem 20
no ipv6 cef
ip source-route
ip cef
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO2911/K9 sn FTX1603AH9C
interface Embedded-Service-Engine0/0
no ip address
interface GigabitEthernet0/0
description internal-LAN
ip address 172.x.x.x 255.255.0.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1.1
encapsulation dot1Q 11
ip address 172.16.x.x 255.255.240.0
interface GigabitEthernet0/2
description internet
ip address 50.240.x.x 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 100 interface GigabitEthernet0/2 overload
ip route profile
ip route 0.0.0.0 0.0.0.0 50.240.x.x
ip route 0.0.0.0 0.0.0.0 172.10.0.30 name ROUTE-VPN-REMOTE
ip route 172.16.240.0 255.255.254.0 172.10.x.x
access-list 100 permit ip 172.10.0.0 0.0.255.255 any
access-list 100 permit ip 172.16.240.0 0.0.0.255 any
access-list 100 permit udp any any range 5004 5090
access-list 100 permit udp any any range 10000 20000
control-plane
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
endThere are some VSP where they do the NAT. If your VSP (like mine) do the NAT, then you need to globally disable NAT in your Asterisk.
My VSP also recommends I disable ALG on my router.
So you need to ask you VSP. -
Need help with troubleshooting VPN betwen Cisco 2911 and Dell Sonicwall 4060
Hello all,
I am trying to set up a VPN Tunnel between the devices mentioned above. The tunnel appears to be established, but I've encountered some issues along the way. I can ping from the Cisco 2911 to a server behind the Sonicwall, but I cannot ping from that server to the Cisco router unless the router is pinging the server at the same time. What should I do to fix this problem?
UPDATE: The tunnel is no longer working between the two devices. The end result I am looking for is to have a VPN tunnel between these two devices which does NAT and allows me to ping across without having to constantly ping to keep the session open. Before the tunnel went down, I was able to ping that server behind the sonicwall using a port on the inside of the firewall as a source port for the ping, and at one point I was able to ping back to the router from the server, but was unable to ping beyond that interface. I think the problem that I am running into has to do with the zone-based firewall configurations that are already on the router. I don't want to mess with those configurations already in place, but I am not sure how to get this tunnel working. I'm fairly certain I need to start from the beginning in regards to this tunnel, but I cannot figure out how to configure this the right way.
Thanks in advance for any help
Michael
Message was edited by: Michael SotalinFinally the testing is successful on Sonicwall NSA 240 as well with Cisco ASA. Actually somehow Sonicwall firewall was discovering my VPN Box's Public leg (Private IP (10.10.50.10)) as well, which was behind a Live Peer IP (203.124.x.x). As per security policies it shouldnt have been discovered on the remote end. i will bring this in Cisco TAC notice.
Logs of Sonicwall were showing ASA local ike id as "203.124.x.x" & ASA Remote ike id "10.10.50.10".
Sonicwall sets these two parameters with PSK (local ike id & remote ike id). This is other than setting the Peer IP. i asked my client to add my ASA actual and NAT IP in these two parameters and the VPN got UP. -
Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072
I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
I am able to create the VPN connection but the connection will not allow data to be transferred.
Stats from a manual connection:
Cisco AnyConnect Secure Mobility Client Version 3.1.04072
VPN Stats
Bytes Received: 14375
Bytes Sent: 0
Compressed Bytes Received: 0
Compressed Bytes Sent: 0
Compressed Packets Received: 0
Compressed Packets Sent: 0
Control Bytes Received: 0
Control Bytes Sent: 0
Control Packets Received: 0
Control Packets Sent: 0
Encrypted Bytes Received: 7820
Encrypted Bytes Sent: 1207
Encrypted Packets Received: 9
Encrypted Packets Sent: 3
Inbound Bypassed Packets: 0
Inbound Discarded Packets: 0
Outbound Bypassed Packets: 0
Outbound Discarded Packets: 0
Packets Received: 4
Packets Sent: 0
Time Connected: 00:03:01
Protocol Info
Inactive Protocol
Protocol Cipher: RSA_3DES_168_SHA1
Protocol Compression: None
Protocol State: Disconnected
Protocol: DTLS
Active Protocol
Protocol Cipher: RSA_3DES_168_SHA1
Protocol Compression: Deflate
Protocol State: Connected
Protocol: TLS
OS Version
Windows 8 : WinNT 6.2.9200
Log from the data transmission software:
24/12/2013 12:51:13 - Application version = 1.11.28.0
24/12/2013 12:51:13 - Lodgement Library Version = 1.11.28.0
24/12/2013 12:51:13 - Connection Method = INTERNET
24/12/2013 12:51:13 - DIS Connection Type = Automatic
24/12/2013 12:51:13 - VPN Client = ACTIVE
24/12/2013 12:51:13 - Check Available Connections = NOT ACTIVE
24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
24/12/2013 12:51:13 - Language: English (Australia)
24/12/2013 12:51:13 -
24/12/2013 12:51:13 - Connected to ISP via LAN
24/12/2013 12:51:13 - Checking for presence of VPN client.
24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
24/12/2013 12:51:18 -
24/12/2013 12:51:18 - Checking Cisco AnyConnect version.
24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc. All Rights Reserved.
24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Initializing the VPN connection.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
24/12/2013 12:51:23 - Authenticating user.
24/12/2013 12:51:23 - Connected to VPN concentrator.
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Checking for profile updates...
24/12/2013 12:51:23 - Checking for product updates...
24/12/2013 12:51:23 - Checking for customization updates...
24/12/2013 12:51:23 - Performing any required updates...
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
24/12/2013 12:51:24 - Establishing VPN - Examining system...
24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
24/12/2013 12:51:24 - Establishing VPN - Configuring system...
24/12/2013 12:51:24 - Establishing VPN...
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connection to VPN client return code = 0.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
Connection timed out.
24/12/2013 12:51:46 -
24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
24/12/2013 12:51:46 - Disconnect in progress, please wait...
24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
24/12/2013 12:51:47 - Detached.
24/12/2013 12:51:47 - Disconnected from VPN concentrator.
24/12/2013 12:51:47 - *****************************************************
24/12/2013 12:51:47 - END OF LODGEMENT PROCESS
24/12/2013 12:51:47 - *****************************************************
Issue history:
- Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
- Upgrade to Windows 8.1 stopped the VPN client working
- Refreshed system back to Windows 8 and reinstalled all software
- Cisco VPN client would not install on system
- Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
- Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
- Data transmission software returns error code #10060
Any assistance would be greatly appreciated.anyone found the fix for this?
-
Cisco Anyconnect Secure Mobility Client crashes on Mac 10.8.5
Hi,
I have a Macbook Pro with Mountain Lion 10.8.5 OS installed. I am using Cisco Anyconnect Secure Mobility Client as a VPN to access my company's network (Intranet). Had been using this software for more than 2 Months and all of a sudden now when I use this Secure Mobility Client, the application is crashing and I get the following error message:
Process: Cisco AnyConnect Secure Mobility Client [1340]
Path: /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
Identifier: com.cisco.vpn
Version: 3.0.10055
Code Type: X86 (Native)
Parent Process: launchd [152]
Date/Time: 2013-11-10 11:18:57.739 +0530
OS Version: Mac OS X 10.8.5 (12F45)
Report Version: 10
Interval Since Last Report: 6277 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Crashed Thread: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
VM Regions Near 0x4:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
__TEXT 0000000000001000-0000000000025000 [ 144K] r-x/rwx SM=COW /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x96fcf7ce mach_msg_trap + 10
1 libsystem_kernel.dylib 0x96fcecac mach_msg + 68
2 com.apple.CoreFoundation 0x990e1f79 __CFRunLoopServiceMachPort + 185
3 com.apple.CoreFoundation 0x990e795f __CFRunLoopRun + 1247
4 com.apple.CoreFoundation 0x990e701a CFRunLoopRunSpecific + 378
5 com.apple.CoreFoundation 0x990e6e8b CFRunLoopRunInMode + 123
6 com.apple.HIToolbox 0x97821f5a RunCurrentEventLoopInMode + 242
7 com.apple.HIToolbox 0x97821cc9 ReceiveNextEventCommon + 374
8 com.apple.HIToolbox 0x97821b44 BlockUntilNextEventMatchingListInMode + 88
9 com.apple.AppKit 0x91d9193a _DPSNextEvent + 724
10 com.apple.AppKit 0x91d9116c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
11 com.apple.AppKit 0x91d875cc -[NSApplication run] + 855I have identical problem on 10.7.5 OS and AnyConnect 3.1.04074
Just started happening yesterday.
Please post if you find a solution. -
CTRANSPORT_ERROR_TIMEOUT with Cisco AnyConnect Secure Mobility Client 3.1.05170
Hi,
I use Cisco AnyConnect Secure Mobility Client 3.1.05170 to connect to my company network and it has been working successfully for a while and until Sunday evening Feb 8.
Today, this solution is no longer working and I've reproduced the same issue on 3 different Mac's which have 10.10.2 (on 2 Mac's) and 10.9.5 (on 1 Mac).
I can navigate on internet without any problem but when I launch the connection in Cisco AnyConnect Secure Mobility Client, it time outs and I get the following errors:
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type information sent to the user: Contacting <company server name removed for security reasons>.
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Initiating VPN connection to the secure gateway https://<company server name removed for security reasons>
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 11572 Received connect notification (host <company server name removed for security reasons>, profile myaccess1.xml)
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 718 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29294571 (0xFE410015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 322 Invoked Function: ::getaddrinfo Return Code: 35 (0x00000023) Description: unknown
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 730 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 839 Invoked Function: CHostLocator::resolveHostName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name <company server name removed for security reasons> to IPv6 address
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 913 Host <company server name removed for security reasons> has been resolved to IP address 144.24.19.20
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Writing to hosts file: 144.24.19.20 <company server name removed for security reasons> ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed.
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 4893 The requested VPN connection to <company server name removed for security reasons> will target the following IP protocols and addresses: primary - IPv4 (address 144.24.19.20), secondary - N/A.
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1939 PasswordEntry username is nwipfli
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 857 Return success from VerifyServerCertificate
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: SendRequest File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1422 Invoked Function: curl_easy_perform Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT 28 : Error
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: sendRequest File: ../../vpn/Api/ConnectIfc.cpp Line: 3191 Invoked Function: CTransport::SendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectIfc.cpp Line: 481 Invoked Function: ConnectIfc::sendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: TranslateStatusCode File: ../../vpn/Api/ConnectIfc.cpp Line: 3008 Invoked Function: TranslateStatusCode Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT Connection attempt has timed out. Please verify Internet connectivity.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: doConnectIfcConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1963 Invoked Function: ConnectIfc::connect Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Connection attempt has failed.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2614 Content type (unknown) received. Response type (host unreachable) from <company server name removed for security reasons>:
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Unable to contact <company server name removed for security reasons>.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2724 Unable to contact <company server name removed for security reasons>
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type error sent to the user: Connection attempt has timed out. Please verify Internet connectivity.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectMgr.cpp Line: 2050 ConnectMgr::processIfcData failed
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: initiateConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1181 Connection failed.
Any idea about a solution ?
Thanks in advance
NicolasThere seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it... -
Problems with Cisco AnyConnect Secure Mobility Client 3.1
Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
The service does not start correctly anymore. I tried reinstabut no help.
Could anyone help me please?
Here my logs.
Thank you very much.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnva
Description : Function: CInstaller::PerformAction
File: .\VACon.cpp
Line: 522
Successfully installed service acsock
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpninstall
Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
File: .\Xml\XmlLocalACPolMgr.cpp
Line: 415
Local Security Policy file already exists and therefore will not be generated
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F84) has been successfully created.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F20) has been successfully created.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
Date : 07/23/2013
Time : 08:49:49
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x000016C0) has been successfully created.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:10
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F34) has been successfully created.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:19
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:20
Type : Information
Source : acvpnui
Description : Initializing vpnapi version 3.1.04059 ().
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getCurrentState
File: .\ClientIfcBase.cpp
Line: 2058
API service not ready
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.nam.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: L2Api::attach
File: .\L2Api.cpp
Line: 87
The NAM/L2 Api could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.websecurity.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: SSApi::attach
File: ..\common\SSApi.cpp
Line: 51
The Web Security API could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Error
Source : acvpnui
Description : Function: MFDartBox::getDARTInstallDir
File: .\MFDartBox.cpp
Line: 332
Invoked Function: MsiEnumProductsExW
Return Code: 259 (0x00000103)
Description: No more data is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getStats
File: .\ClientIfcBase.cpp
Line: 1723
Called when API service not ready.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CSocketTransport::connectTransport
File: .\IPC\SocketTransport.cpp
Line: 981
Invoked Function: ::WSAConnect
Return Code: 10061 (0x0000274D)
Description: No connection could be made because the target machine actively refused it.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::connectIpc
File: .\IPC\IPCTransport.cpp
Line: 252
Invoked Function: CSocketTransport::connectTransport
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::terminateIpcConnection
File: .\IPC\IPCTransport.cpp
Line: 404
Invoked Function: CSocketTransport::writeSocketBlocking
Return Code: -31588319 (0xFE1E0021)
Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initIpc
File: .\ApiIpc.cpp
Line: 423
Invoked Function: CIpcTransport::connectIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initiateAgentConnection
File: .\ApiIpc.cpp
Line: 336
Invoked Function: ApiIpc::initIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::run
File: .\ApiIpc.cpp
Line: 570
Invoked Function: ApiIpc::initiateAgentConnection
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ClientIfcBase::attach
File: .\ClientIfcBase.cpp
Line: 606
Client failed to attach.
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: CMainFrame::OnCreate
File: .\mainfrm.cpp
Line: 342
Invoked Function: The VPN service is not responding or available.
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Function: ClientIfcBase::detach
File: .\ClientIfcBase.cpp
Line: 438
Shutting down vpnapi
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: ConnectMgr::activateConnectEvent
File: .\ConnectMgr.cpp
Line: 1352
NULL object. Cannot establish a connection at this time.
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x0000162C) has been successfully created.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPThere seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it... -
Warning System spameater Unable to connect to Cisco Web Security Service.; URL Filter...
My C670 ESA's have been throwing these alerts intermittently for the past few days, anyone else seeing them?
The Warning message is:
Unable to connect to Cisco Web Security Service.
URL Filtering will not work correctly.
Please verify all network, proxy and firewall settings.
Connection to "v2.sds.cisco.com" failed.
The last error seen on this connection: "Request failed with code: 28 (Connection time-out)"
Version: 8.5.6-092
Looks like it is open on port 443 and currently up. Hitting it with a browser gives me:
https://v2.sds.cisco.com/
After an error or two they go away and appear OK.
Checking the logs I don't see a way to verify URL lookups are working, is there a way?
Also, I setup URL filtering six months ago and had it set to only trigger on (-10)-(-9.5) and saw about an 80% false positive. It has improved over the past six months drastically but still catching mostly advertising URLs and allowing all phishing URLs right through. I've yet to see it block a phishing URL.
JasonAfter lots of trial and error, I was able to eliminate this problem. What I wound up doing is defining the XE service again in the listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server)
I know that typically you should not have to do this, especially since I already had defined DEFAULT_SERIVCE_LISTENER = (XE) at the bottom of the listener.ora file. Explicitly defining the XE service in the listener.ora file allows the listener to find it while the system is running under the Cisco AnyConnect VPN. The only hiccup I found by doing this is that the XE service is discovered twice by the listener when the system is NOT running under the Cisco AnyConnect VPN. It still works OK. The listener just seems to ignore the repeated definition of the XE service (see output below):
C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server\bin>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-JUN-2013 10:03:15
.......(omitted output).......
Service "XE" has 2 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: DEV-M-137GF, pid: 5544>
(ADDRESS=(PROTOCOL=tcp)(HOST=DEV-M-137GF.paychex.com)(PORT=58257))
The command completed successfully
If anyone has a cleaner solution for this problem, please let me know. Otherwise, I am moving forward with what I did.
Thanks.....Paul -
Hello there.
I am having a problem with Cisco AnyConnect version 3.1.04072. When one of my colleagues disconnects from the VPN session, closes out the program, and then later on, reopens the client, the address that he manually entered did not save and it's defaulting on the two now-defunct VPN servers listed.
Here's an example to see if it makes more sense:
-User opens Cisco AnyConnect. By default, there are two selections available on the pulldown:
SSLVPN.abcdefg.com
access.abcdefg.ca
These two VPN servers are now defunct and we use a new VPN server:
access.abcdefg.com
The user has to manually type it in. He is now able to connect. However, when disconnected. Regardless if the program is closed or not, it does not save the new VPN server address, rather goes back to the default two VPN servers listed.
I've checked XML, HTML, registry keys, sys files, dll files to see if I can change the default servers manually. No sign of it.
I'm hoping that someone out there knows a solution to fix it.
Thanks in advance!Hi Vergel ,
You can create Anyconnect client profile on ASA. In this profile , you can define the hostname/IP that you wish to connect , along with hostname/IP that should be displayed on the client.
In the client profile , you can define these parameters - "HostName" and "HostAddress" as "access.abcdefg.com" so that any user , who tries to connects , will see "access.abcdefg.com" as the name displayed in the anyconnect connect field.
On the client, the xml profile (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) [Win 7] can be seen using those parameters as follows:-
<HostEntry>
<HostName>access.abcdefg.com</HostName>
<HostAddress>access.abcdefg.com</HostAddress>
</HostEntry>
Ref:- http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac03vpn.html#89103
Additionally, you can try to delete preferences.xml file to remove the redundant hostnames from the anyconnect connect filed.
Path for preferences.xml is C:\Users\Cisco\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client (Win 7),
Hope this helps.
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.
Maybe you are looking for
-
the SDN, I need to create a middleware server that reads requests from a database then forwards these requests to the "real" servers. The reason i referred to the app as a "middleware SERVER" is because this app will be started once and will run fore
-
Emails with attachment not sent straight away!
Hello everybody, I have a problem with Mail 2.0. When I compose Emails with an attachment and click send, they seem to disappear. They are neither in the draft box, nor is mail sending them out. When I quit Mail than and reopen it, it starts to send
-
Good afternoon, I bought a box of PEV in the game the sims 3 worth € 8.99 and I was not credited in the game despite me out of the account. How can I cancel or receive the PEV?
-
HT1338 Upgrade to Mac OS x 10.6
I click "update" quite often but it seems I do not have OS x 10.6 My computer still shows I have 10.5.8 What is necessary to get the 10.6 version?
-
[COMPLEX DATATYPE] - Cannot create table
Hello I tried to create a table with a column based on an complex data type from an Xml Schema. 1 -- XML Schema <?xml version="1.0" encoding="UTF-8"?> <!--W3C Schema generated by XMLSpy v2007 sp2 (http://www.altova.com)--> <xs:schema xmlns:xs="http:/