Cisco 881W - ap gui interface problem

We have a new Cisco 881W wireless router;
used the CP Express gui interface to perform initial setup;
router assigned 10.10.10.3 as wireless ap gui interface;
when entering ap gui the entire screen is blank expect for an "enter" button near bottom;
clicking on this button does nothing; "error on page" is indicated on IE8 status;
assigned SSID is not broadcasting

Hi !!
im the same problem , but i fix it
first you must change the IOS version to ap801-k9w7-tar.124-10b.JDA3 ( you can dowload for the cisco web )
after download the image file you putt this command in the ap exec mode:
ap#archive download-sw /overwrite /force-reload tftp://x.x.x.x/ap801-k9w7-tar.124-10b.JDA3.tar
after the files are copied to flash memmory , the routyer boots with the new image ang bug fixed
its is my configuration working:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Current configuration : 3267 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$T0Qk$/wKGmrwqo0WcBbvTapaNb.
no aaa new-model
dot11 ssid CASIO
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 121A04041B04010132222727
crypto pki trustpoint TP-self-signed-4051168682
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4051168682
revocation-check none
rsakeypair TP-self-signed-4051168682
crypto pki certificate chain TP-self-signed-4051168682
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 34303531 31363836 3832301E 170D3131 30383139 31303037
33385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D34 30353131
36383638 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B090 26BE5E77 FCB338C0 F54949DB 43EF95C1 61A9C3FA 38AC8BDC 18931195
B1B1A503 65A71B68 8940639A FB6A6D9B 0F327B09 F5C48ECD 89C1B279 9DC6DC98
11E5D014 914200BB 7F29CFD1 1CC5FDF0 F3AFE547 4954E2CA 37FC1CEC 60641871
D9949391 35C958B3 FBA6FBF7 116612FD DFAB9467 478A6E07 0F7B2616 F1204158
EC510203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02617030 1F060355 1D230418 30168014 1120DB6C BE01CDEE
64A2DB14 FA240B27 D3573B9B 301D0603 551D0E04 16041411 20DB6CBE 01CDEE64
A2DB14FA 240B27D3 573B9B30 0D06092A 864886F7 0D010104 05000381 81003B69
8FC11090 E61D3BC1 D04FBDC5 622E8BC6 EB63B9FA C795BB15 BB05F417 CFC51F09
A8A1971E 7E523203 5A40654D B71623CB A48B193A 101FD1AD 868128E9 91940B71
5CFDDDD4 856B8170 7700C656 A75443DF DBB60F06 67E37A70 69175B84 24AB0380
221AAA1D 3EB80465 FD1C1F49 B75B0F1D BC4A82B2 EB2176F2 27F54894 5E94
quit
username Cisco password 7 106D000A0618
username ivan privilege 15 secret 5 $1$eEHQ$Dc.dDfXJz2fBbPIGhH.zg1
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
ssid CASIO
speed basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.10.5 255.255.255.0
no ip route-cache
ip http server
ip http authentication local
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
now you cant acces to ap web gui
thanks !!!

Similar Messages

Not access WLC cisco 2106 by GUI interface

Hi Expert ,
i am trying to configure it but i can not access GUI interface.it is true this is my frist time.please help me to access this GUI interface.

I assume you have read through the Quick start guide for the 2106 controller?
http://www.cisco.com/en/US/docs/wireless/controller/2100/quick/guide/ctrl206q.html
Also the configuration guide covers connecting via cli and gui:
http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52intf.html

Cisco AP 1131AG Web Interface Problem

Hello,
I purchased two Cisco access points (model AIR-AP1131AG-A-K9) from a seller on eBay. The Access Points power up fine and are able to get an IP address (I can see the AP's MAC address on my router), but it won't let me connect to the web interface to manage it. I have tried using different browsers, but they all say something along the lines of "The page could not be found" when I enter the IP address into my browser. No login screen, no nothing: just a time-out error.
When the Access Points are powered on, the Ethernet and Radio lights start out green, but then the Ethernet light stays green and the radio light flashes amber and the two alternate being lit. The status light on the outside of the Access Point goes from green to orange to red and back again, looping infinitely.
Any ideas what could be wrong? Thanks for any and all help in advance! (Please let me know if you need more information; I don't ahve the AP's with me, but I will be home in a few hours and can respond then.)

do a show cdp neighbor detail on the port the AP is connected to. Take a look at the software that is running, IOS will show k9w7, and lightweight will show k9w8.
if it''s k9w8, you'll need to convert them back to IOS
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to create custom GUI interface for Cisco router?

Hello,
I am working on a Cisco solution and I have my router configured for the solution I need. However, if a non-cisco person needs to use my solution then I think he will need a GUI interface which will have few "buttons" which when clicked will run some Cisco commands on Cisco router to make it work. Is there a way to design such GUI interface which is compatible with Cisco routers? I know Cisco has SDM, but that is too involved and detailed, which is useful only for people who know atleast a little bit about Cisco. Here I am looking at crowd who will have 0 knowledge of Cisco.
Please let me know if something like this can be done. If yes, how and how easily?
Thank you.

There are lots of ways to do this - you can use SNMP or even HTTP to push or pull commands from Cisco devices. How easy it is to create a GUI depends on your programming skills. I would guess a simple web page triggering backend scripts would be the easiest way to do this.

Problem Configuring from CUE GUI interface.

Hello all,
I am installing a CUE-AIM module. I have configured Ip connectivity between the module and the router. i have all GUI files in flash, but i cannot get to the GUI interface of the CUE. I can however reach the GUI on CCME.
I have attached a copy on the sh run and show flash.
I really need you help.

If I'm not mistaken (and this might just be the way we decided to configure it) but I believe that you need to enter a static route to the service module which points to the service engine and then configure the default gateway of the CUE service module pointing to the service engine. The service engine itself can use an unnumber i/f taken from a physical address or a loopback (preferred). Then on your network, either through static or advertised via routing protocol, they will go to CUE via the service engine IP address, not the actual CUE ip address.
Here's the design guide. We ended up using a small network (4 hosts) for the service engine and the service module.
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_implementation_design_guide_chapter09186a00804993bf.html
Here are the particulars:
interface FastEthernet0/0
ip address b.68.10.1 255.255.255.0
interface Service-Engine4/0
ip unnumbered FastEthernet0/0
service-module ip address b.68.10.10 255.255.255.0
service-module ip default-gateway b.68.10.1
ip route b.68.10.10 255.255.255.255 Service-Engine4/0

Problem when applying my changes at the CCA Administrator GUI Interface

Hi when i´m trying to save my changes at the CCA Administrator GUI interface(TAW) i´m receiving the error below:
04 Ago 2009 11:17:39,968 [ ERROR com.taw.clients.am.AdminSuperBean $Revision: 5 $.processHashtable(AdminSuperBean.java:504) - Unable to process the Hashtable
java.lang.NullPointerException
at com.taw.clients.am.AdminSuperBean.constructSqlQuery(AdminSuperBean.java:796)
at com.taw.clients.am.AdminSuperBean.processHashtableAdmin(AdminSuperBean.java:562)
at com.taw.clients.am.AdminSuperBean.processHashtable(AdminSuperBean.java:500)
at com.taw.clients.am.AdminSuperBean.processHashtable(AdminSuperBean.java:493)
at com.taw.clients.am.configuration.CompanyDefaultSecurityBean.processRequest(CompanyDefaultSecurityBean.java:212)
at com.taw.clients.am.CompanyBean.processRequest(CompanyBean.java:1771)
at jsp_servlet._administrationmanager.__company_edit._jspService(__company_edit.java:1289)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3392)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Please anyone know how can i fix it ?
Regards,
Marcelo Henrique
Experti - Brazil

Hi below the contents of the web.xml file, let´s to try to fix this trouble together.
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app>
<context-param>
<param-name>webContainer</param-name>
<param-value>Weblogic</param-value>
</context-param>
<context-param>
<param-name>disableMessageSynchronization</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>busConnection</param-name>
<param-value>experti-labsrv</param-value>
</context-param>
<context-param>
<param-name>noResourceBundle</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>reportServerUrl</param-name>
<param-value>http://experti-labsrv/TAW</param-value>
</context-param>
<context-param>
<param-name>isReportServer</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>applicationPath</param-name>
<param-value>C:\bea\user_projects\domains\experti_domain\app\TAW</param-value>
</context-param>
<context-param>
<param-name>URLstoragePath</param-name>
<param-value>http://experti-labsrv/TAW/Storage</param-value>
</context-param>
<context-param>
<param-name>storagePath</param-name>
<param-value>/Storage</param-value>
</context-param>
<context-param>
<param-name>debugLogFile</param-name>
<param-value>\WEB-INF\logs\CallCenterAnywhere.log</param-value>
</context-param>
<context-param>
<param-name>debugMaxNumberLogFiles</param-name>
<param-value>5</param-value>
</context-param>
<context-param>
<param-name>debugMaxLogFileSize</param-name>
<param-value>1000</param-value>
</context-param>
<context-param>
<param-name>debugTracelevel</param-name>
<param-value>DEBUG</param-value>
</context-param>
<context-param>
<param-name>debugLogPattern</param-name>
<param-value>%d{DATE} [%t] %-5p %c.%M(%F:%L) %x - %m</param-value>
</context-param>
<context-param>
<param-name>databasePlatform</param-name>
<param-value>ORACLE</param-value>
</context-param>

<context-param>
<param-name>databaseDatasource</param-name>
<param-value>cca813</param-value>
</context-param>
<context-param>
<param-name>databaseSchema</param-name>
<param-value>mhpAdminCC813</param-value>
</context-param>

<context-param>
<param-name>databaseDatasourceReadOnly</param-name>
<param-value>cca813</param-value>
</context-param>
<context-param>
<param-name>databaseSchemaReadOnly</param-name>
<param-value>mhpAdminCC813</param-value>
</context-param>

<context-param>
<param-name>weblogic.httpd.inputCharset./*</param-name>
<param-value>UTF-8</param-value>
</context-param>
<context-param>
<param-name>ftpConnectMode</param-name>
<param-value>active</param-value>
</context-param>
<servlet>
<servlet-name>ProxyDispatcher</servlet-name>
<servlet-class>com.taw.web.ProxyDispatcher</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>ProxyPingHandler</servlet-name>
<servlet-class>com.taw.web.ProxyPingHandler</servlet-class>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet>
<servlet-name>ProxyLoginHandler</servlet-name>
<servlet-class>com.taw.web.ProxyLoginHandler</servlet-class>
<load-on-startup>3</load-on-startup>
</servlet>
<servlet>
<servlet-name>ProxyLoginDataHandler</servlet-name>
<servlet-class>com.taw.web.ProxyLoginDataHandler</servlet-class>
<load-on-startup>4</load-on-startup>
</servlet>
<servlet>
<servlet-name>ProxyContactHandler</servlet-name>
<servlet-class>com.taw.web.contact.was.ProxyContactHandler</servlet-class>
<load-on-startup>5</load-on-startup>
</servlet>
<servlet>
<servlet-name>WebServiceChat</servlet-name>
<servlet-class>com.taw.web.service.WebServiceChat</servlet-class>
<load-on-startup>6</load-on-startup>
</servlet>
<servlet>
<servlet-name>ReportServlet</servlet-name>
<servlet-class>com.taw.clients.reports.ReportServlet</servlet-class>
<load-on-startup>7</load-on-startup>
</servlet>
<servlet>
<servlet-name>CustomReportServlet</servlet-name>
<servlet-class>com.taw.clients.reports.CustomReportServlet</servlet-class>
<load-on-startup>8</load-on-startup>
</servlet>
<servlet>
<servlet-name>ImageServlet</servlet-name>
<servlet-class>net.sf.jasperreports.j2ee.servlets.ImageServlet</servlet-class>
<load-on-startup>9</load-on-startup>
</servlet>
<servlet>
<servlet-name>ProxyRequestHandler</servlet-name>
<servlet-class>com.taw.web.ProxyRequestHandler</servlet-class>
<load-on-startup>10</load-on-startup>
</servlet>
<servlet>
<servlet-name>glue-console</servlet-name>
<servlet-class>electric.console.ConsoleServlet</servlet-class>
<init-param>
<param-name>soapServletContext</param-name>
<param-value>/services</param-value>
</init-param>
<load-on-startup>11</load-on-startup>
</servlet>
<servlet>
<servlet-name>glue-soap</servlet-name>
<servlet-class>electric.server.http.ServletServer</servlet-class>
<init-param>
<param-name>httpRegistryRoot</param-name>
<param-value>/</param-value>
</init-param>
<load-on-startup>12</load-on-startup>
</servlet>
<servlet>
<servlet-name>JnlpDownloadServlet</servlet-name>
<servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servlet-class>
<init-param>
<param-name>logLevel</param-name>
<param-value>DEBUG</param-value>
</init-param>
<init-param>
<param-name>logPath</param-name>
<param-value>C:\bea\user_projects\domains\experti_domain\app\TAW\WEB-INF\logs\jnlpdownloadservlet.log</param-value>
</init-param>
<load-on-startup>13</load-on-startup>
</servlet>
<servlet>
<servlet-name>ProxyMessageHandler</servlet-name>
<servlet-class>com.taw.web.ProxyMessageHandler</servlet-class>
</servlet>
<servlet>
<servlet-name>ProxyWebCallback</servlet-name>
<servlet-class>com.taw.web.webcallback.ProxyWebCallback</servlet-class>
</servlet>
<servlet>
<servlet-name>ProxyDial</servlet-name>
<servlet-class>com.taw.web.dial.ProxyDial</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>ProxyDispatcher</servlet-name>
<url-pattern>/ProxyDispatcher</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ReportServlet</servlet-name>
<url-pattern>/ReportServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyPingHandler</servlet-name>
<url-pattern>/ProxyPingHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyLoginHandler</servlet-name>
<url-pattern>/ProxyLoginHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyLoginDataHandler</servlet-name>
<url-pattern>/ProxyLoginDataHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyContactHandler</servlet-name>
<url-pattern>/ProxyContactHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>WebServiceChat</servlet-name>
<url-pattern>/WebServiceChat</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyRequestHandler</servlet-name>
<url-pattern>/ProxyRequestHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyMessageHandler</servlet-name>
<url-pattern>/ProxyMessageHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyWebCallback</servlet-name>
<url-pattern>/ProxyWebCallback</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProxyDial</servlet-name>
<url-pattern>/ProxyDial</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>glue-soap</servlet-name>
<url-pattern>/services/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>glue-console</servlet-name>
<url-pattern>/console/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jnlp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jar</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>CustomReportServlet</servlet-name>
<url-pattern>/CustomReportServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ImageServlet</servlet-name>
<url-pattern>/imageServlet</url-pattern>
</servlet-mapping>
<filter>
<filter-name>XSS</filter-name>
<filter-class>com.taw.web.filter.CrossScriptingFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>XSS</filter-name>
<url-pattern>/AdministrationManager/*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>XSS</filter-name>
<url-pattern>/index.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>XSS</filter-name>
<url-pattern>/InteractionManager/*.jsp</url-pattern>
</filter-mapping>
</web-app>

NSS2000 interface problem

Hi All,
I have a strange problem with nss2000 web interface: when I try to login to the NAS from any browser (IE or Firefox), the web interface is extremely slow and sometimes I need to refresh browser page after login to see the web interface. Does anyone have the same problem?
Thank you!
Bye.

This issue is not with the NAS, it is with the changes from browsers. It is common very slow to access to many devices to work with broswers before IE 8 or Firefox 3.5.X. There are competitive market for browser to make it works much faster, mainly between Firefox and IE. IE 8 and later version of Firefox broswers are sending large number of http connections (8 http connections) to query the data to any devices (NSS is one of them) for display data on the browsers. The more http connections simultanousely, the faster data will be displayed. Because NSS limited number of connections of http at a time ( 4 http connections), the browser thinks it has not done with query the data and lkeep trying. User think it the NAS but it is not. Any browser version before IE 8 or firefox 3.5.X are working fine. It is the incompatible resources from later version of browsers to resources reserved in the NSS.
I believe, this issue is across the networking community for small devices with Web GUI interface, particularly for user who is using the latest browsers.
The work around is:
1. When access to NSS, give it 2 seconds. Move the mouse cursor at the end of the URL. click "Enter" on the keyboard for data display.
2. Use IE 7 or previous firefox version before 3.5.0
3. Use Safari or Google broswer as different browser to access to NSS GUI. Cisco is not official supported these browsers, but they are working fine.
Maintenance release: There is a fix to allocated more resources from the NSS to handle these new number of http connections requested from browser. We are working to address this issue so user can use any version of the browser.

Cisco 881W no longer broadcasting SSID

We've had a Cisco 881W set up in one of our remote offices for a while and the wireless has been fine. Yesterday I got a call saying that the wireless was no longer working.
I went over and it's true, the SSID is no longer broadcasting. I reloaded the router but it's still the same. I tried to get access to the embedded ap and I get this
RTR#service-module wlan-ap 0 session
% telnet connections not permitted from this terminal
RTR#
Now I've not changed anything on the configuration since it went in and it was working before. Has the embedded ap died? The embedded ap is still showing as a component in show hardware.

There is the wlan-gigbitethernet0 which is the switch interface that connects to the AP. That is showing up/up.
A service module wlan-ap0 status shows
RTR#service-module wlan-ap 0 status
Service Module is Cisco wlan-ap0
Service Module supports session via TTY line 2
Service Module is in Steady state
Service Module reset on error is disabled
Service Module heartbeat-reset is enabled
Getting status from the Service Module, please wait..
Image path = flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1
System uptime = 0 days, 5 hours, 59 minutes, 41 seconds
Line 2 has this
line 2
no activation-character
no exec
transport preferred none
transport input all

ACE Web GUI Interesting Problem

I have a very strange issue with the ACE web GUI interface. I have 2 ACE's that are in Active/Standby setup with a floating management IP address for each context. Now when I try to login to the Web interface with the Floating Mgmt. IP address for one of my contexts it always takes me to the Admin context and not the one I am trying to hit. I did some testing and I found it does this with every context when you try to login to the Web interface using the floating IP address. If I use one of the real IP's of an individual ACE I am able to get logged into the correct context. Has anybody else run into this? Is there something I can do to fix it? Also I noticed that when you login to the web interface using that same floating IP address it always passes RADIUS requests as the Admin context IP address as well.

I don't see this problem with version A3(2.x)
This was fixed with CSCso98451
G.

EW520-24K9-Unable to log into GUI interface

Can't access the GUI interface of a EW520-24K9 switch. Tried using the serial cable and Ethernet cable with no success. The default IP address of 192.168.10.2, 192.168.10.1 or 192.168.10.254 is not working. Any ideas?

- Do you have the ESW connected to a network that has a DHCP server such as UC520? If so you may want to check on the DHCP server what IP address is assigned to ESW 520 (MAC address binding). If its a UC520 - then CCA can discover this for you - note make sure you connect the uplink port on the ESW to the UC520 expansion port
- If the ESW is standalone connected back to back to your PC - have you gone through steps 1 through 8 in Section 2 at the guide below:
http://www.cisco.com/en/US/docs/switches/lan/csbms/esw500/quick_start/guide/ESW_500_Quick_Start_Guide.pdf
- If you are using a console cable - make sure the right settings are configured - check page 49 at link below:
http://www.cisco.com/en/US/docs/switches/lan/csbms/esw500/administration/guide/ESW_500_Administration_Guide.pdf
If you have tried all of the above - can you factory reset the ESW and try one of the above?

NAC CAM 4.8 Unable to Access Web GUI Interface

Hello, we were working on trying to get the CAM and CAS to talk by using a Microsoft CA, we imported the Certs that we generated and shortly after that we lost Web GUI access, we are still able to access via SSH and everything appears ok, reloading the server didnt help. Is it possible the Cert was corrupted preventing us from accessing the web GUI interface, how can I regenerate cert and install it from the CLI? Should I look at something else like log files, if so what do I look for?
Thank you,
Mark

Hi Mark,
this problem also happend to me,
U might want to check perfigo status with this command :
/perfigo/common/bin/fostate.sh

Interface Problems in Yosemite

Problem shows up when using software other than the native OS X apps.
If I attempt to close a window behind the app that has focus by clicking the red x part of the semaphore buttons (top left on every window) it will not work unless I change focus to that app by clicking the bar at the top.
As an example if I'm using Byword to view a document while composing an email in Airmail once I finished and move on to viewing, say a receipt, in Airmail and want to make a copy of that receipt and place it on the desktop. I'm done with Byword and it is covering the desktop so why not close it and get it out of the way. I move the mouse pointer over the red X part of the semaphore buttons and click, nothing happens. I have to bring Byword into focus by clicking the title bar, then click the red x to finally close the window. If the app below Airmail happened to be Safari the red X works properly.
On my Mac Mini using Yosemite this works properly for all apps.
This is only a slight problem but I have been having the odd quirky interface problems for the past while and I'm worried that something has gone south and these may end up adding together to make a very large problem. Initially I had problems with PopClip which seemed to be screwing around with the interface buttons in Rapidweaver 6. I removed the app to clear that problem using AppDelete.
While trying to diagnose this problem I have removed all the auto login apps that I can and rebooted several times to no avail.
Any help would be greatly appreciated!
EtreCheck version: 2.1.8 (121) log:
EtreCheck version: 2.1.8 (121)
Report generated February 5, 2015 at 12:32:53 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (27-inch, Late 2012) (Technical Specifications)
    iMac - model: iMac13,2
    1 3.4 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 0/DIMM1
            Empty
        BANK 1/DIMM1
            Empty
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
        iMac 2048 x 1152
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:0:46
Disk Information: ℹ️
    APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
    APPLE SSD SM128E disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Boot OS X (disk0s3) <not mounted> : 134 MB
        Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
USB Information: ℹ️
    Verbatim Portable USB 3.0 Drive 1 TB
        EFI (disk3s1) <not mounted> : 210 MB
        Verbatim HD (disk3s2) /Volumes/Verbatim HD : 999.86 GB (31.06 GB free)
    Apple Inc. FaceTime HD Camera (Built-in)
    Logitech USB Receiver
    Samsung Electronics Co., Ltd. ML-2160 Series
    Wacom Co.,Ltd. Wacom Wireless Receiver
    Razer Razer 1600dpi Mouse
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Transmit.app
    [not loaded]    com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Click for support]
        /Applications/VMware Fusion.app
    [not loaded]    com.vmware.kext.vmci (90.6.3) [Click for support]
    [not loaded]    com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
    [not loaded]    com.vmware.kext.vmnet (0231.47.74) [Click for support]
    [not loaded]    com.vmware.kext.vmx86 (0231.47.74) [Click for support]
    [not loaded]    com.vmware.kext.vsockets (90.6.0) [Click for support]
        /Library/Extensions
    [loaded]    at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
    [loaded]    com.avatron.AVExFramebuffer (1.7 - SDK 10.9) [Click for support]
    [loaded]    com.avatron.AVExVideo (1.7 - SDK 10.9) [Click for support]
    [loaded]    com.globaldelight.driver.Boom2Device (1.1 - SDK 10.10) [Click for support]
    [loaded]    com.logitech.manager.kernel.driver (4.10.1 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
    [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.9) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) [Click for support]
    [loaded]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support]
    [loaded]    com.eltima.SyncMate.kext (0.2.5b15) [Click for support]
    [loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Click for support]
    [loaded]    com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Click for support]
    [not loaded]    com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Click for support]
    [not loaded]    com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9) [Click for support]
        /System/Library/Extensions/Soundflower.kext
    [not loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
    [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
    [running]    com.logitech.manager.daemon.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.realvnc.vncserver.peruser.plist [Click for support]
    [not loaded]    com.realvnc.vncserver.prelogin.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
    [running]    com.wacom.wacomtablet.plist [Click for support]
Launch Daemons: ℹ️
    [running]    at.obdev.littlesnitchd.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.backblaze.bzserv.plist [Click for support]
    [loaded]    com.barebones.authd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.realvnc.vncserver.plist [Click for support]
    [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
    [loaded]    com.sharpcast.xfsmond.plist [Click for support]
    [loaded]    com.sheepsystems.CocoaPrivilegedHelper.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
    [loaded]    de.appgineers.Mountain.Helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.backblaze.bzbmenu.plist [Click for support]
    [running]    com.ecamm.printopia.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.pia.pia_manager.plist [Click for support]
    [loaded]    com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
    [loaded]    com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    [failed]    ws.agile.1PasswordAgent.plist [Click for support] [Click for details]
User Login Items: ℹ️
    WD Quick View    Application (/Library/Application Support/WDSmartware/WDQuickView.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 [Click for support]
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
    Picasa: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    1Password
    Clip to DEVONthink
    Choosy
    Ember
    Save to Pocket
    Stache
3rd Party Preference Panes: ℹ️
    AirServer Preferences [Click for support]
    Backblaze Backup [Click for support]
    Choosy [Click for support]
    Flash Player [Click for support]
    FUSE for OS X (OSXFUSE) [Click for support]
    Hazel [Click for support]
    Java [Click for support]
    Logitech Control Center [Click for support]
    Logi Preference Manager [Click for support]
    Printopia [Click for support]
    WacomTablet [Click for support]
    WDQuickView [Click for support]
    Web Sharing [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 1.11 TB Disk used: 848.39 GB
    Destinations:
        Verbatim HD [Local]
        Total size: 999.86 GB
        Total number of backups: 101
        Oldest backup: 2013-11-22 16:26:50 +0000
        Last backup: 2015-02-05 15:55:38 +0000
        Size of backup disk: Too small
            Backup size 999.86 GB < (Disk used 848.39 GB X 3)
Top Processes by CPU: ℹ️
        12%    mds
         2%    WindowServer
         0%    loginwindow
         0%    fontd
         0%    mds_stores
Top Processes by Memory: ℹ️
    292 MB    mds_stores
    172 MB    SophosScanD
    172 MB    InterCheck
    155 MB    SophosAntiVirus
    120 MB    Finder
Virtual Memory Information: ℹ️
    3.32 GB    Free RAM
    2.72 GB    Active RAM
    1.40 GB    Inactive RAM
    1.15 GB    Wired RAM
    1.56 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 5, 2015, 12:30:03 PM    Self test - passed
    Feb 4, 2015, 10:59:58 PM    /Library/Logs/DiagnosticReports/RapidWeaver 6_2015-02-04-225958_[redacted].cpu_resource.diag [Click for details]
    Feb 3, 2015, 03:07:17 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0717_[redacted].crash
    Feb 3, 2015, 03:02:23 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0223_[redacted].crash
    Jan 15, 2015, 08:04:41 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-15-200441_[redacted].panic [Click for details]

Try un-installing Sophos.
Sophos Un-install

What is better/easier GUI Interface and Code

I'm trying to write a GUI interface that will constantly update a bunch of variables with whatever the user inputs. Is it better to make a GUI and then try to pass the updates back to other underlying code which is in seperate Classes and methods or is it better to combine the two with the updates right in the GUI code itself.
Right now I have made the basics of the GUI but I haven't really implemented any underlying code (I've made the robot but I don't have the servos to make it move -- as an analogy). Comments?

Ideal system design has separation between the view and the underlying data model. Preferrably there is a 3rd intermediary, a controller. That's the MVC design pattern. However, how far you implement that pattern depends on the purpose of the program and the complexity of the data model. A simple program you can probably just implement it all right there in the GUI. It won't follow proper software development principles, but we have those so we can deal with large, complex systems. Another thing to consider is what the user input is used for. If it is not required beyond the GUI then I'd say put it in the GUI (since iot really is part of the GUI). But if it's to be used somewhere else, pass the data to the model.

Interface Problems: DBA = Data Pump = Export Jobs (Job Name)

Hello Folks,
I need your help in troubleshooting an SQL Developer interface problem.
DBA => Data Pump => Export Jobs (Job Name) => Data Pump Export => Job Scheduler (Step):
-a- Job Name and Job Description fields are not visible. Well the fields are there but each of them just 1/2 character wide. I can't see/enter anything in the fields.
Import Wizard:
-b- Job Name field under the first "Type" wizard's step looks exactly the same as in Export case.
-c- Can't see any row under "Chose Input Files" section (I see just ~1 mm of the first row and everything else is hidden).
My env:
-- Version 3.2.20.09, Build MAIN-09.87
-- Windows 7 (64 bit)
It could be related to the fact that I did change fonts in the Preferences. As I don't know what is the default font I can't change it back to the default and test (let me know what is the default and I will test it).
PS
-- Have tried to disable all extensions but DBA Navigator (11.2.0.09.87). It didn't help
-- There are no any messages in the console if I run SQL Dev under cmd "sqldeveloper\bin\sqldeveloper.exe
Any help is appreciated,
Yury

Hi Yury,
a-I see those 1/2 character size text boxes (in my case on frequency) when the pop up dialog is too small - do they go away when you make it bigger?
b- On IMPORT the name it starts with IMPORT - if it is the half character issue have you tried making the dialog bigger?
c-I think it is size again but my dialog at minimum size is already big enough.
Have you tried a smaller font - or making the dialogs bigger (resizing from the corners).
I have a 3.2.1 version where I have not changed the fonts from Tools->Preferences->CodeEditor->Fonts appears to be:
Font Name: DialogInput
Font size: 12
Turloch
-SQLDeveloper Team

GUI related problem in solaris 8 02/04

Hello all,
I am facing GUI related problem in the software running on solaris when I upgraded from solaris 8 02/02 to 8 02/04.
The GUI which was working fine on 02/02 was giving some menu selection problem in 02/04. In GUI applications i was unable to select items after double clicking it in solaris 8 02/04 while it was working fine in solaris 8 02/02.
Are there any O.S. related problem?
Thanks and regards,
Ankit

Wolfgang073 wrote:
Hi guys and ladys!
I added the LD_LIBRARY_PATH, Why are you doing that. It's probably a bad idea.
but the Openwindows not run OK (e.g. start cmdtool window without csh % prompt etc.).That's very possible. Don't make global changes to LD_LIBRARY_PATH (by putting in your login files for example). Instead if you need it to run a particular program, make a wrapper that sets the variable and then calls the program. That will limit the scope of those changes.
vi .login
# Erasing LD_LIBRARY_PATH
setenv LD_LIBRARY_PATH
# Important Paths set
setenv LD_LIBRARY_PATH /usr/ucblib:$LD_LIBRARY_PATHDon't do that.
Darren

Cisco 881W - ap gui interface problem

Similar Messages

Maybe you are looking for