Cisco IOS Version to Support SIP Trunking on AS5400 Routers
Hi all,
Kindly help .Can anyone tell me which Cisco IOS Version Supports SIP Trunking on AS5400 Routers ?
Regards,
Cliff .
Hi,
Please look at:
http://www.cisco.com/en/US/products/hw/univgate/ps505/products_data_sheet09186a0080091e51.html
http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/UPfeapu.html
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
Similar Messages
-
Please confirm.. Whether Cisco CCM support SIP trunking !
Hi,
We r in the process of VoIP implementation nd during that phase came to know that Cisco doesn't support SIP trunking at gateway level.. Can anyone suggest me whether it's true or not??? Cisco says its support SIP then what is the meaning of that?? I m really confused with the twisting of words in different docs...Thanks to all of you for your reply...When you say SIP trunking is supported then whether I can use SIP at gateway level towards making outward call.. Sorry if I am getting confused myself but when one says SIP trunking is supported what's the mean of that?? If I have a trunk line(PSTN) and a T1 line acting as a gateway, is it possible to design a network only depending upon SIP protocol using CISCO UNIFIED Components and call manager 5.0 ??
Sorry once again if my question sound something ..... but it just to clear my confusion too as I am listening so many stuff from different people when it comes to SIP overall implementation for a Enterprise network using CISCO Unified communication equipments...
With best regards,
Mani -
Router platform and IOS version to support MPLS
I have few Cisco 2621 routers and one 3640 router, could I use these router to create a MPLS VPN lab? if so , what is the minimum IOS version required?
Thanks in advance.The minimum hardware and software image tu support MPLS can be found at www.cisco.com/go/fn select search by feature and in the search box put MPLS (Multiprotocol Label Switching) there you can find the platform and IOS to support basic MPLS, but you need to consider the fact that supporting MPLS special features like AToM can only be supported on some 7200, 7500, 7600, 10000 and 12000, http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a0080153e64.html#1030652
-
Minimum IOS version to support scp URLs
While recent IOS versions support scp sources or destinations for copy
operations ...
aprompt#copy running-config ?
flash1: Copy to flash1: file system
flash2: Copy to flash2: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
http: Copy to http: file system
https: Copy to https: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
scp: Copy to scp: file system
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
tmpsys: Copy to tmpsys: file system
aprompt#copy running-config
... older ones obviously don't (here we have 12.1):
aprompt#copy running-config ?
bs: Copy to bs: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
xmodem: Copy to xmodem: file system
ymodem: Copy to ymodem: file system
zflash: Copy to zflash: file system
aprompt#copy running-config
Who could tell me the minumum version to support scp URLs?
Thanks and Regards, ThomasIdeally any feature set questions are answerable in Cisco Feature Navigator (http://www.cisco.com/go/fn).
The Secure Copy (SCP) feature provides a secure and authenticated method for copying router configuration or router image files. SCP relies on Secure Shell (SSH), an application and a protocol that provide a secure replacement for the Berkeley r-tools. So ideally you should be running crypto images (k9) which support SSH and hence SCP as well.
But following are some details about SCP, which may be helpful :
Feature Name
Releases
Feature Information
Secure Copy
12.2(2)T12.0(21)S
12.2(25)S
This feature was introduced in Cisco IOS Release 12.2(2)T.
This feature was integrated into Cisco IOS Release 12.0(21)S.
This feature was integrated into Cisco IOS Release 12.2(25)S.
The following commands were introduced or modified: debug ip scp, ip scp server enable.
Following is details Feature Information for Secure Shell Version 2 Support:
Feature Name
Releases
Feature Information
Secure Shell Version 2 Support
12.2(11)T
12.2(25)S
12.3(4)T
15.3(2)S
The Secure Shell Version 2 Support feature allows you to configure Secure Shell (SSH) Version 2 (SSH Version 1 support was implemented in an earlier Cisco IOS software release). SSH runs on top of a reliable transport layer and provides strong authentication and encryption capabilities. SSH version 2 also supports AES counter-based encryption mode.
The following commands were introduced or modified: debug ip ssh, ip ssh min dh size, ip ssh rsa keypair-name, ip ssh version, ssh.
Secure Shell Version 2 Client and Server Support
12.0(32)SY
12.3(7)JA
12.4(17)
The Cisco IOS image was updated to provide for the automatic generation of SNMP traps when an SSH session terminates.
SSH Keyboard Interactive Authentication
12.2(33)SXH3
12.4(18)
The SSH Keyboard Interactive Authentication feature, also known as Generic Message Authentication for SSH, is a method that can be used to implement different types of authentication mechanisms. Basically, any currently supported authentication method that requires only user input can be performed with this feature.
Secure Shell Version 2 Enhancements
12.2(50)SY
12.4(20)T
15.1(2)S
The Secure Shell Version 2 Enhancements feature includes a number of additional capabilities such as support for VRF-aware SSH, SSH debug enhancements, and DH Group 14 and Group 16 exchange support.
In Cisco IOS 15.1(2)S, support was added for the Cisco 7600 series router.
Note
Only the VRF-aware SSH feature is supported in Cisco IOS Release 12.2(50)SY.
The following commands were introduced or modified: debug ip ssh, ip ssh dh min size.
Secure Shell Version 2 Enhancements for RSA Keys.
15.0(1)M
15.1(1)S
The Secure Shell Version 2 Enhancements for RSA Keys feature includes a number of additional capabilities to support RSA key-based user authentication for SSH and SSH server host key storage and verification.
The following commands were introduced or modified: ip ssh pubkey-chain, ip ssh stricthostkeycheck.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
CS5.5 Air for iOs - Which iOs versions are supported?
Hi everyone,
I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
Suggestions?
Anyone tried on similar OS?
Thanks a lot
IacopoOk, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
Any news on this?
Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme.... -
Compatible 6500 IOS version to support IDSM-2 Inline mode
The 6500 model WS-SUP720-3BXL with IOS version 12.2(18)SXD4,
and IDS card WS-SVC-IDSM-2 with sw 5.0(2)is compatible to run on inline mode.
Regards,
VirajGood day,
Hi, You need minimum sup-bootdisk:s3223-advipservicesk9_wan-mz.122-18.SXF7.bin IOS to enable INLINE mode on 6500 series.
as per my knowledge,
the latest IOS is
sup-bootdisk:s3223-adventerprisek9_wan-mz.122-18.SXF13.bin.
for IDSM-2, if u upgrade to Engine 2 IOS, U can get update with E2 signatures and also U can manage from New Management Console like Cisco IPS manager Express 6.1.
I hope this will satisfy. -
IOS version that support 2048 bits certificate
Hello,
I need to update a 2504 Wireless Controller to a version that supports 2048 bits certificates.
I´m checking release notes for release 7.4.110.0 and I don´t see any information about a limitation in certification size (2048 bytes in my case).
Do you know any restriction about the certificate size in this or another version?
Thanks and Regards.
Iván.2048 bit is supported on the WLC. I use it for WebAuth and 3rd party certificates as these vendors only issue 2048 these days.
Sent from Cisco Technical Support iPhone App -
Which iOs version is supported?
Hi
I'm just wondering which version of iOs is supported by the 4.5SDK?
Regards,
Larsi think it comes out in June right now it is Android only someone correct me if i am wrong !
-
how do i get dictionary application in my iphone 3g running in 4.2.1 ios. and i want skype and viber and facebook as well. could anyone help
Since the iPhone 3G will only run iOS up to 4.2.1, if these apps require a higher iOS level, there is nothing that you can do.
There should be some dictionary apps in the App store that will run on iOS 4.2.1. -
UC560 SIP Trunk, IOS Jabber, MWI
Has anyone successfully been able to configure complete functionality of these on the UC560? Making IOS Jabber work, breaks sip trunk configuration and the MWI. I do currently have a case opened with TAC, but they have yet to find the solution. Currently the sip trunk is working as is the MWI, the IOS Jabber phone is registered, but can not make or receive phone calls.
Good morning
Hi John, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. You can post your question in "Small Business Voice and Conferencing>SBCS - UC500" so you can have more feedback on your case, more users will see it there. You can move your post using the actions panel on the right.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer. -
I Want Buy Cisco ASA Firewall Supporting SIP
Hello Guys I want to buy cisco ASA Firewall , that support SIP and Session Border Controller (SBC) So please can any one tell me the most power full that support this protocols ,, Than you guys
Hi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH, -
Cisco Aironet Conversion Tool Version 2.1 for Cisco IOS Software
I am trying to convert a LWAP to Cisco IOS and the tool wants to know the Admin Name*? This is a factory radio sent to me as LWAP. I cannot seem to find out what the Admin Name is, I have tried Admin and Cisco not sure what else to try.
Hi Brian,
That tool is used for the IOS to LWAPP upgrade only. The AP can be converted back to Autonomous (IOS) using the following method;
Reverting the Access Point Back to Autonomous Mode
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
Using a TFTP Server to Return to a Previous Release
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 5 Disconnect power from the access point.
Step 6 Press and hold MODE while you reconnect power to the access point.
Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
Hope this helps!
Rob -
Unable to place call on calls on hold - SIP Trunk from CUCM to CUBE and from CUBE to ISTP
Hi Cisco Community,
I have a SIP Trunk setup between the CUCM and CUBE and another SIP Dial Peers from the CUBE to the ITSP. All incoming/outgoing calls, DTMF-Relay works well except one thing which is the ability to hold the call.
On the SIP Trunk from the CUCM to the CUBE, I did not select “MTP” because when I do so, I am forced to select my preferred MTP codec which when selected G.729/G.729a, all my outgoing calls goes out using G.729r8. This codec works well for most of the calls until the ITSP replies back with G.729br8. When this condition occur, my call simply fails (this is very intermittent and only some random numbers).
That said, I have some issues with DTMF Relay when I select MTP on the SIP Trunk. DTMF Relay only works if the call is G.729r8 all the way from the CUCM to the ITSP. If the ITSP replies back with G.729br8, the call might established but will simply be “voice-only”.
The current setup is no MTP is selected and everything is working perfectly. I am happy with that until I place a call on hold, which when I do so, the call immediately terminate. Could you please help me understand why?
I have all media resources configured such as G.729r8 MTP, G.729br8 MTP, G.711u MTP, Transcoding with all codecs, etc. All MRG and MRGL are configured on all devices and SIP Trunks.
Below is an example of a call that is connected with the current setup:
Note:
IP: 10.18.81.2 (CUBE)
IP: 10.18.81.11 (CUCM SUB)
IP: 10.111.111.254 (ITSP SBC)
PM-HO-VG-01#
PM-HO-VG-01#
Nov 30 11:44:29.938: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence, kpml
Supported: X-cisco-srtp-fallback,X-cisco-original-called
Call-Info: <sip:10.18.81.11:5060>;method="NOTIFY;Event=telephone-event;Duration=500"
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
Session-Expires: 1800
Contact: <sip:[email protected]:5060>
Max-Forwards: 70
Content-Length: 0
Nov 30 11:44:29.942: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:29.946: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1417347869
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.18.81.2:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Session-Expires: 1800
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 301
v=0
o=CiscoSystemsSIP-GW-UserAgent 7676 6958 IN IP4 10.18.81.2
s=SIP Call
c=I
PM-HO-VG-01#N IP4 10.18.81.2
t=0 0
m=audio 22256 RTP/AVP 18 0 8 101
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Nov 30 11:44:29.950: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Nov 30 11:44:30.658: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 180 Session Progress
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Session: Media
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:30.662: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2747 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:31.226: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 180 Session Progress
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Session: Media
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
X-BroadWorks-Correlation-Info: bbf9
PM-HO-VG-01#4839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept: application/media_control+xml,application/sdp,application/xml
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 10.111.111.254
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC81D00
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:31.634: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2747 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:31.726: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72075e3a02c1
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence, kpml
Content-Type: application/sdp
Content-Length: 236
v=0
o=CiscoSystemsCCM-SIP 9082578 1 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 10.18.80.40
b=TIAS:8000
b=AS:8
t=0 0
m=audio 21928 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 10.18.80.40
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
PM-HO-VG-01#
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 10.18.80.40
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
PM-HO-VG-01#sh sip
PM-HO-VG-01#sh sip-ua call
PM-HO-VG-01#sh sip-ua calls
Total SIP call legs:2, User Agent Client:1, User Agent Server:1
SIP UAC CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 27218091323
Called Number : 0862000000
Bit Flags : 0xC04018 0x10000100 0x0
CC Call ID : 64511
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : [10.111.111.254]:5060
Destn SIP Resp Addr:Port: [10.111.111.254]:5060
Destination Name : 10.111.111.254
Number of Media Streams : 1
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Mode : flow-through
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 64511
Stream Type : voice+dtmf (0)
Stream Media Addr Type : 1
Negotiated Codec : g729br8 (20 bytes)
Codec Payload Type : 18
Negotiated Dtmf-relay : rtp-nte
Dtmf-relay Payload Type : 101
QoS ID : -1
Local QoS Strength : BestEffort
Negotiated QoS Strength : BestEffort
Negotiated QoS Direction : None
Local QoS Status : None
Media Source IP Addr:Port: [10.18.81.2]:22256
Media Dest IP Addr:Port : [10.111.111.254]:20074
Options-Ping ENABLED:NO ACTIVE:NO
Number of SIP User Agent Client(UAC) calls: 1
SIP UAS CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 0218091323
Called Number : 0862000000
Bit Flags : 0xC0401E 0x10000100 0x80004
CC Call ID : 64510
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : [10.18.81.11]:5060
Destn SIP Resp Addr:Port: [10.18.81.11]:5060
Destination Name : 10.18.81.11
Number of Media Streams : 1
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Mode : flow-through
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 64510
Stream Type : voice+dtmf (1)
Stream Media Addr Type : 1
Negotiated Codec : g729br8 (20 bytes)
Codec Payload Type : 18
Negotiated Dtmf-relay : rtp-nte
Dtmf-relay Payload Type : 101
QoS ID : -1
Local QoS Strength : BestEffort
Negotiated QoS Strength : BestEffort
Negotiated QoS Direction : None
Local QoS Status : None
Media Source IP Addr:Port: [10.18.81.2]:22350
Media Dest IP Addr:Port : [10.18.80.40]:21928
Options-Ping ENABLED:NO ACTIVE:NO
Number of SIP User Agent Server(UAS) calls: 1
PM-HO-VG-01#
PM-HO-VG-01#
PM-HO-VG-01#
As you can see, the call is connected and everything is working perfectly. When I press the hold button, here is what I get:
NOTE: I have # debug ccsip messages and #debug ccsip calls (running)
PM-HO-VG-01#
PM-HO-VG-01#
Nov 30 11:44:49.210: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 102 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Contact: <sip:[email protected]:5060>
Content-Type: application/sdp
Content-Length: 244
v=0
o=CiscoSystemsCCM-SIP 9082578 2 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 0.0.0.0
b=TIAS:8000
b=AS:8
t=0 0
m=audio 21928 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=inactive
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Nov 30 11:44:49.218: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:49.218: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC9241
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1417347889
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.18.81.2:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Length: 271
v=0
o=CiscoSystemsSIP-GW-UserAgent 7676 6959 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 0.0.0.0
t=0 0
m=audio 22256 RTP/AVP 18 101
c=IN IP4 0.0.0.0
a=inactive
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC9241
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 102 INVITE
Timestamp: 1417347889
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Supported:
Accept: application/media_control+xml,application/sdp,application/xml
Contact: <sip:[email protected]:5060;transport=udp>
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 360
v=0
o=BroadWorks 316169737 2 IN IP4 10.111.111.254
s=-
c=IN IP4 0.0.0.0
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
a=inactive
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 0.0.0.0
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.282: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECA2633
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:49.282: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Length: 271
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2748 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 0.0.0.0
t=0 0
m=audio 22350 RTP/AVP 18 101
c=IN IP4 0.0.0.0
a=inactive
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Nov 30 11:44:49.282: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72094953dfea
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: presence
Content-Length: 0
Nov 30 11:44:49.290: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 103 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Contact: <sip:[email protected]:5060>
Content-Length: 0
Nov 30 11:44:49.294: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:49.294: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECB16F3
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 103 INVITE
Max-Forwards: 70
Timestamp: 1417347889
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:49.338: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECB16F3
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 103 INVITE
Timestamp: 1417347889
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Supported:
Accept: application/media_control+xml,application/sdp,application/xml
Contact: <sip:[email protected]:5060;transport=udp>
Content-Type: application/sdp
Content-Length: 306
v=0
o=BroadWorks 316169737 3 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:49.342: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 2
PM-HO-VG-01#00 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2749 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:49.350: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720b594cd517
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 103 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 213
v=0
o=CiscoSystemsCCM-SIP 9082578 3 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 10.18.81.10
t=0 0
m=audio 4000 RTP/AVP 18
a=X-cisco-media:umoh
a=rtpmap:18 G729/8000
a=ptime:20
a=fmtp:18 annexb=no
a=sendonly
Nov 30 11:44:49.354: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECC55
From: <sip:[email protected]>;tag=3C365010-1E42
To: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Max-Forwards: 70
Timestamp: 1417347889
CSeq: 101 BYE
Reason: Q.850;cause=86
P-RTP-Stat: PS=874,OS=17480,PR=872,OR=17440,PL=0,JI=0,LA=0,DU=17
Content-Length: 0
Nov 30 11:44:49.354: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECD1ECD
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Max-Forwards: 70
Timestamp: 1417347889
CSeq: 104 BYE
Reason: Q.850;cause=65
P-RTP-Stat: PS=872,OS=17440,PR=952,OR=19040,PL=0,JI=0,LA=0,DU=17
Content-Length: 0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 Race Condition
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECD1ECD
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
Timestamp: 1417347889
CSeq: 104 BYE
Content-Length: 0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 10.111.111.254
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 65
Disconnect Cause (SIP) : 200
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECC55
From: <sip:[email protected]>;tag=3C365010-1E42
To: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 101 BYE
Content-Length: 0
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 0.0.0.0
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 86
Disconnect Cause (SIP) : 200
PM-HO-VG-01#Hi Manish,
Again, excellent feedback. Much appreciated.
I will try the commands suggested above and see if I can get DTMF to work correctly while interworking H.323 and SIP.
But my ultimate goal is to have SIP all way from the CUCM to the CUBE and from the CUBE to the ITSP.
If I enable SIP Early Offer with MTP on the CUCM going to the CUBE, all SIP Invite sent from the CUCM to the CUBE uses G.729r8 as the codec and once the call is established using G.729r8 should the ITSP reply with that codec, the call succeed and I am able to see an active MTP session using G.729 when I issue the command # show sccp connections.
One thing that I saw is that my ITSP love so much sending G.729br8 most of the times, so even if using SIP EO with MTP on the SIP Trunk to the CUBE, when I sent my INVITE out from the CUCM to the CUBE using G.729r8, specially on call center numbers such as 0800 numbers, you will see that the call established but the codec being negotiated is G.729br8 which is voice only (missing DTMF).
I will be doing some intensive test again later on this week and will send the logs.
Here is my question to both of you:
Which is the best way of having a proper SIP to SIP setup all the way that will not pose any problem?
Do I have to enable Early Offer on the SIP Profile used by the CUBE SIP Trunk or should I use the normal Standard SIP Profile? Do I need to enable MTP on my CUBE SIP Trunk or not?
From the CUBE point of view, I have a voice class codec that support G.729r8 or G.729br8 and the DTMF Relay method supported by the ITSP is RFC 2833.
I will send more logs for each scenario. I think that we are getting close to the resolution of this problem.
Thanks again for your support fellows. -
UC540 SIP trunk "allowed IP addresses" limitation?
Testing out a UC540 and I'm using Callcentric. Working great, but the feature under the SIP trunk configuring/Advanced that allows you to set the IP addresses of machines allowed to connect to the UC540 only supports a maximum of 100 entries. Callcentric wants 204.11.192.0/24 or 204.11.192.0-204.11.192-255 unblocked.
The UC540 doesn't seem to support inputting a range in any notation I'm aware of, maybe I'm missing something?
I contacted Callcentric and asked if they could be more specific, LOL, but they said they change things on their end from time to time.
Anyone else figure out a way around this?Okay, follow-up to the question.
How bad an idea is it to leave this security feature disabled?
I have a bit of experience in this area, I use an Asterisk (FreePBX distro) for my work phone system, and Callcentric is my SIP trunker. Before I limited incoming connections to my FreePBX server to the Callcentric range above, there would be occasions (maybe once every 2-3 weeks) where someone (probably up to no good) found my open port(s) and all my phones would start ringing simultaneously. It lasted for about 20-30 seconds, and then would stop.
My assumption was that someone was looking for security vulnerabilities so they could use my Asterisk box to place their LD (maybe even overseas) calls. They never got anywhere, though, as the Asterisk was fully patched, and my passwords for my handsets were strong.
I wonder if the Cisco UC540 will suffer the same sort of result, or worse, or maybe even not so much.
Obviously I can simply select another trunker. The thing I like about Callcentric are the rates and also the dashboard that allows me to make a lot of adjustments (like forwarding calls to a cell phone number, and the ability to configure faxing reception, too). So if anyone has a suggestion for a supported SIP trunker that supports the same types of features, I'd be open to that, as well.
BTW, I did ask Callcentric one more time, with a link to this topic, whether they can restrict that range to better than 0-255, but they declined. I see their point, just wish there was another simple way around this. -
SSLVPN with iPhone Anyconnect and Cisco IOS Router, Certificate Authentication failed
Hello,
i have a problem regarding the authentication with a certificate from the iPhone Anyconnect 2.5 Client to a 1802 Cisco Router.
Cisco 1802 Router:
Cisco IOS Software, C180X Software (C180X-ADVENTERPRISEK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)
First i configured SSLVPN with username and password, in this configuration the Anyconnect Client of my iPhone works.
then i enrolled a certificate from my Windows 2008 R2 CA to the Router with the Attributes: Server Authentication and IPSEC
and i enrolled a certificate for my iPhone with Client Authentication and IPSEC
after a bunch of time ( i realy could not find a really good documentation on how to do this) i got it done, in the webvpn context configuration i made this changes here:
no aaa authentication list default
authentication certificate
ca trustpoint CA
as the "SSL VPN Configuration Guide, Cisco IOS Release 15.1M&T" says: if i want only certificate authentication i had to user the "authentication certificate" command and thats it.
as i look into the debugs it seems to me that the Router accepts the certificate of the iPhone, but then i receive a window on the iphone that wants an additional username and password authentication, and no matter what i enter there's always the same dialog coming back..
any ideas what the problem could be???
here is the configuration:
webvpn gateway WEBVPN_GW_OFFICE2
ip interface Dialer0 port 1444
ssl trustpoint CA
inservice
webvpn install svc flash:/webvpn/sslclient-win-1.1.4.179.pkg sequence 1
webvpn install svc flash:/webvpn/anyconnect-win-3.0.4235-k9.pkg sequence 2
webvpn install svc flash:/webvpn/anyconnect-dart-win-2.5.3055-k9.pkg sequence 3
webvpn context WEBVPN_CONTEXT2
secondary-color white
title-color #669999
text-color black
ssl authenticate verify all
policy group WEBVPN_POLICY2
functions svc-enabled
mask-urls
svc address-pool "SSLVPN_OFFICE1"
svc default-domain "domain.internal"
svc keep-client-installed
svc split include 192.168.0.0 255.255.0.0
svc dns-server primary 192.168.53.33
svc dns-server secondary 192.168.53.35
virtual-template 3
default-group-policy WEBVPN_POLICY2
gateway WEBVPN_GW_OFFICE2
authentication certificate
ca trustpoint CA
inservice
here is the debug:
OfficeRouter1# PASSING appctx is [0x89FAFFCC]
Nov 19 22:39:53.507: WV: sslvpn process rcvd context queue event
Nov 19 22:39:53.507: WV: sslvpn process rcvd context queue event
Nov 19 22:39:53.607: WV: sslvpn process rcvd context queue event
Nov 19 22:39:53.607: WV: Entering APPL with Context: 0x86529380,
Data buffer(buffer: 0x86543A40, data: 0x15A07AB8, len: 469,
offset: 0, domain: 0)
Nov 19 22:39:53.607: WV: http request: / with no cookie
Nov 19 22:39:53.607: WV: validated_tp : CA cert_username : matched_ctx :
Nov 19 22:39:53.607: WV: Received appinfo
validated_tp : CA, matched_ctx : ,cert_username :
Nov 19 22:39:53.607: WV: Trustpoint match successful
Nov 19 22:39:53.607: WV: Extracted username: pass: ?
Nov 19 22:39:53.607: WV: Client side Chunk data written..
buffer=0x86543640 total_len=661 bytes=661 tcb=0x8811FE60
Nov 19 22:39:53.607: WV: Appl. processing Failed : 2
Nov 19 22:39:53.607: WV: sslvpn process rcvd context queue event
BueroRouter1# PASSING appctx is [0x89FAEEC4]
Nov 19 22:40:24.028: WV: sslvpn process rcvd context queue event
Nov 19 22:40:24.032: WV: sslvpn process rcvd context queue event
Nov 19 22:40:24.132: WV: sslvpn process rcvd context queue event
Nov 19 22:40:24.132: WV: Entering APPL with Context: 0x86529380,
Data buffer(buffer: 0x86543A40, data: 0x160C4038, len: 469,
offset: 0, domain: 0)
Nov 19 22:40:24.132: WV: http request: / with no cookie
Nov 19 22:40:24.132: WV: validated_tp : CA cert_username : matched_ctx :
Nov 19 22:40:24.132: WV: Received appinfo
validated_tp : CA, matched_ctx : ,cert_username :
Nov 19 22:40:24.132: WV: Trustpoint match successful
Nov 19 22:40:24.132: WV: Extracted username: pass: ?
Nov 19 22:40:24.132: WV: Client side Chunk data written..
buffer=0x86543640 total_len=661 bytes=661 tcb=0x88D11EEC
Nov 19 22:40:24.136: WV: Appl. processing Failed : 2
Nov 19 22:40:24.136: WV: sslvpn process rcvd context queue event
Nov 19 22:40:39.764: WV: sslvpn process rcvd context queue event
Nov 19 22:40:39.880: WV: sslvpn process rcvd context queue event
Nov 19 22:40:39.892: WV: sslvpn process rcvd context queue event
Nov 19 22:40:39.892: WV: Entering APPL with Context: 0x86529380,
Data buffer(buffer: 0x86543A40, data: 0x1616FD38, len: 610,
offset: 0, domain: 0)
Nov 19 22:40:39.892: WV: http request: /webvpn.html with domain cookie
Nov 19 22:40:39.892: WV: validated_tp : cert_username : matched_ctx :
Nov 19 22:40:39.892: WV: Received appinfo
validated_tp : CA, matched_ctx : ,cert_username :
Nov 19 22:40:39.892: WV: Trustpoint match successful
Nov 19 22:40:39.892: WV: Client side Chunk data written..
buffer=0x86543640 total_len=607 bytes=607 tcb=0x88D11EEC
Nov 19 22:40:39.892: WV: Appl. processing Failed : 2
Nov 19 22:40:39.892: WV: sslvpn process rcvd context queue eventhttp://www.cisco.com/en/US/products/ps8411/products_qanda_item09186a00809aec31.shtml
HI,
Refer to
AnyConnect VPN Client FAQ
Q. Is it possible to connect the iPad, iPod, or iPhone AnyConnect VPN Client to a Cisco IOS router?
A. No. It is not possible to connect the iPad, iPod, or iPhone AnyConnect VPN Client to a Cisco IOS router. AnyConnect on iPad/iPhone can connect only to an ASA that runs version 8.0(3).1 or later. Cisco IOS is not supported by the AnyConnect VPN Client for Apple iOS. For more information, refer to the Security Appliances and Software Supported section of the Release Notes for Cisco AnyConnect Secure Mobility Client 2.4, Apple iOS 4.2 and 4.3.
Maybe you are looking for
-
Unable to Reinstall iTunes - error message: "Apple Application Support was not found"
When attempting to update my iPhone today, my iTunes would not open. I followed the instructions to completely uninstall iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and Apple Applications Support. I then attempted to reinst
-
Return Order with reference to Proforma invoice
Dear All Is it possible to create a return order with reference to proforma invoice. How ?? if possible. Our scenario is when we do stock transfer order and truck meets with an accident or anything and material needs to written to the factory premise
-
Error while showing data in sub tab region
Hi, I have created a custom OAF page with three Tabs Device Details User Privileges Chart Templates Under "User Privileges" There is a summary page which shows all User details records. When user click on "Update" icon control is delegated to "Update
-
Need some urgent support from you guys! [iPad3 Display]
I have an event on April 20th that I need to show off phase 1 of an app we're working on. I really want to show it on the new iPad. I'm working in Flash Pro 5.5 ... Can someone please tell me how to compile my app to work on the iPad High Res d
-
Error in \.hotjava\properties
I want to load image by using mediatracker API. After I run my code it comes the error message: Can't read AppletViewer properties file: F:\Documents and Settings\mie\.hotjava\properties I googled, and find solution below: Sun's appletviewer allows a