Cisco Network Assistant 5.8(5) with ASA5520

I was able to discover and manage my ASA5520 with the CNA and consequently display it on the topography.  I added a network cloud icon to display my ISP.  However, the Add Link window doe snot show up when I right-click the ASA to add a link from the ASA to the cloud.  Is there any additional configuration needed on the ASA or CNA for the Add Link window to show?

This function is not supported for any ASA model or software revision as ASA does not support CDP or LLDP to validate layer 2 adjacency.
The same issue applies with Cisco Prime LMS' Topology tool and ASA firewalls.

Similar Messages

  • Can't create VLAN's with Cisco Network Assistant

    Hello everyone
    I have a problem with my newest Switch, a WS-C2960X-48TS-L
    Normaly I can programm all my Switches with Cisco Network Assistant. But now I have a problem with creating VLAN's. I can create them, safe them but after a refresh, all the new VLAN's are gone!
    I updated the CNA to the newest Build 6.0 and updated the Switch to 15.2(2)E, but nothing helps!
    Over the CLI I can do everything, but this is not a option for me! To programm sometimes a switch CNA is perfect for me! If it works!!
    Thanks 
    Tobi

    yes I can programm the vlan's over CLI. That's works. I have not tested this if its really works, but the VLAN's are programmed.
    hmm I checked the STP / VTP settings with a second identical Switch, but there are no differents. Made a backup of one Switch and restore on the other One, but I'm still not able to create VLAN's.
    however, I contacted my vendor today, he tell me that it shouldt be a problem to take back the switch. 
    Best regards
    Tobi

  • Software Cisco Network Assistant for Switch SMB?

    Is there any management software as the Cisco Network Assistant for smb switch as SLM224G or SRW224G4-K9-NA, or only works with models 2960 and higher?

    The SX300 series switch will work with CCA. But it does not work with CNA.
    -Tom
    Please rate helpful posts

  • Wrong Port Statistics in Cisco Network Assistant

    Hello,
    I'm having some troubles with CNA (version 6.0). There's a few switches in the network that displays wrong information about sports activities/statistics. I've got some ports administratively down, without activity, however CNA is showing Tx and Rx rates, etc. I've already cleared counters from the application and from CLI too. If I do "show interface Gix/x/x" in the CLI, it returns results that I waited, but not in CNA, where it's showing wrong information. Moreover, some ports which should have activity and statistics, don't displays info. All rates and statistics shows 0 when I'd must see any number except 0.
    I'm talking about a stack with 3 Catalyst 3750-X 48P.
    Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Fri 25-Oct-13 12:38 by prod_rel_team
    ROM: Bootstrap program is C3750E boot loader
    BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
    Thanks,
    Kind regards,

    In Cisco Network Assistant, under smart ports, if I configure the switch port as Cisco Wireless/Router, it hard  codes the interface as Trunk.In this particular case what is the reason for hard coding it as trunk?
    When you are dealing with autonomous wireless access point, it's very common to have mutiple VLANs configured in the WAP, therefore you need a Trunk switch port.
    You can also configure the trunk port to allow VLANs of your choice.

  • Cisco Network Assistant doesn't start correctly

    Hi!
    A bit of background:
    We've been replacing our 'old' Catalyst 3550 boxes with 3750 Switches, and since the web-interface on these are 'a bit lacking' in functionality(to say the least), we figured that CNA(downloaded latest version) would be just the thing...
    Except, when we try to start it, we get this message:
    Read/write access problems:
    Ingen tilgang
    =======================================
    Note: Read/write access is required for user home directory and installation directory:
    C:\Documents and Settings\BOFH
    C:\Programfiler\Cisco Systems\Cisco Network Assistant
    =======================================
    'Ingen adgang' is Norwegian for 'No access'.
    Also, I've altered my profile name in the message(No need to give away login name, is there? :-)
    Now, my PC is set up according to 'best practices' for a SECURE NETWORKED PC In an office environment.
    In other words, my user doesn't have write access to any folder in the %Program Files% areas, and that's the way we like to keep it...
    So, Who goofed up the software, and how do I get around it without compromising the security of my PC?

    That is NOT a solution.
    The reason why a user shouldn't have write access to the \program files\ folder is that it contains EXECUTABLE BINARIES, which many virii likes to infect.
    Moving the install to another folder and giving a user write access to that just moves the problem to another place.
    What COULD help is a list of subfolders(which doesn't contain binaries or other easily-infected files) or files which the program needs to have write access to, or an updated version which stores its config data somewhere else...

  • Cisco Network Assistant (CNA) Error: Connect

    Best regards community,
    Please I need your help, I installed Cisco Network Assistant 5.8 (9.1) for manage some catalyst switches as 2950, 2960, 2960S, 2960X, 3750X. I can manage all devices except WS-C2960X-24TS-LL model, I have following message from CNA: "Error: Connect Index: 26, Size:26". This device have same configuration for level 15 access as other devices with user name and password. the catalyst switch IOS version is 15.0(2)EX4
    This problem is about either software or hardware? How can solve?
    Thanks in advance

    You're welcome.
    I know the product team monitor the Network Management Forum. If you post your question there, one of them may pick up on it.
    The CNA support typically lags the new product release by about 4-6 months, sometimes longer depending on how well the hardware product release matches up with the network management product's latest release date. The 2960XR just started shipping in July 2013 so a good guess would be that CNA might support it in the next release (5.9?). That's just a guess though.

  • Cisco network assistant username

    hi everyone !
    i have two stacked 3750 and i use cisco network assistant for remote access.
    i have created a user witch the following command :
    username <myusername> privilege 15 password 0 <mypassword>
    i would like to force the use of that username/password for network assistant : i can currently login with my enable password (without username), and that is something i do not want.
    it would be great if someone could help me doing this
    thanx
    clem

    Hi Nagendra !
    yes "login local" is enabled.
    i've seen just now that network assistant access the stack with HTTP.
    is there any mean to limit HTTP access to one user ?
    cheers
    clem

  • Cisco Network Assistant 5.5 and WS-X4013+10GE

    I have installed CNA 5.5 and it works fine with most of the devices, including catalyst 4500 series with different supervisors (WS-X4013+, WS-X4013+TS, WS-X45 SUP6-E).
    It can also detect supervisor WS-X4013+10GE, but CNA failed to show this device in Front Panel View. Is there anything I have to do to make the devices with Supervisor WS-X4013+10GE to be shown in Front Panel View?
    WS-X4013+10GE are in either 4503 or 4506 chassis, running IOS version 12.2(31)SGA or 12.2(40)SG.
    Please give some hints, thanks.
    Rgds,
    Sunny

    I  downloaded Cisco Network Assistant 5.5, everytime when I try to run
    I get error message "Could not creat Java virtual Machine' any idea how
    to solve this?
    To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
    JVM_MAXIMUM_HEAP=1024m
    Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m, and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
    Check out the below link for more information
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html
    Hope to Help !!
    Ganesh.H
    Remember to rate the helpful post

  • Cisco Network Assistant for multiple access

    Hi All,
       hopefully this is the right place to post this.  We've been looking into Cisco Network Assistant for our "help desk" (all 3 of them) and I was wondering if it is possible to configure CNA for a shared environment..  With that I mean the application will run on a Windows Terminal Server and all 3 users should be able to access it.  Currently I've only seen it running localy and each user has to create or import the setting from another user.  This is fine until something changes in the enviorenment and that changes are only saved in the local users configuration. 
    any ideas if something like this is possible with CNA?
    Thanks,
    Dan

    You may have already figured out then where CNA stores it's localized files - in %userdir%/.networkassistant (hidden from view by default).
    You could probably hack the system by manually copying (or scripting a copy) between the respective help desk users' directories but it would be an unsupported setup.
    You'd also potentially face problems of revision synchronization in the event of multiple users making independent changes - whose is the "right one"?

  • Cisco Network Assistant (CNA) 5.6 is launched

    Hi Netpro community! I am very pleased to announce the general availability of Cisco Network Assistant version 5.6.
    While we wish CNA was available sooner, we know there is a lot of pent up demand for device support for the 2960-S, 3750-X, and many new 4k devices. Even without a release for approximately 18 months, CNA had over 100,000 downloads in 2010 and 2009, and we hope to see that number climb with the popularity of Cisco's new fixed and modular switches. Thanks for your patience and we hope you enjoy and utilize the simple, intuitive network management CNA provides.
    If you have any feedback on the product or questions, please feel free to contact me at [email protected]
    Bob Krentler, product manager

    Hi Robert,
    I think your initiative to post a message here, anouncing a new version, is a very good one.
    I have had multiple times where a new version of a product had appeared on CCO but I missed it.
    A generic place (feed) where new NMS releases are anounced would be quite helpfull for me.
    Cheers,
    Michel

  • Cisco Network Assistant - Health Monitor Not Showing Bandwidth Utilization

    Hello,
    Ive setup a new network with 3x 2960 and 2x 3650 switches, trying to view the bandwidth utilization per switch in cisco network assistant in the health monitor unfortunatly it show 0%. I know there is alot of traffic passing through the switches, the other monitors are working correctly (temp, ram and cpu). Is there any special settings that are needed in the switch?
    Thanks

    Srikanth Achanta,
         Thanks for the help!  Here is the output from putty. 
    XXX-Switch1#show controllers utilization
    Port       Receive Utilization  Transmit Utilization
    Gi0/1       0   0
    Gi0/2       0   0
    Gi0/3       0   0
    Gi0/4       0   0
    Gi0/5       0   0
    Gi0/6       0   0
    Gi0/7       0   0
    Gi0/8       0   0
    Gi0/9       0   0
    Gi0/10       0   0
    Gi0/11       0   0
    Gi0/12       0   0
    Gi0/13       0   0
    Gi0/14       0   0
    Gi0/15       0   0
    Gi0/16       0   0
    Gi0/17       0   0
    Gi0/18       0   0
    Gi0/19       0   0
    Gi0/20       0   0
    Gi0/21       0   0
    Gi0/22       0   0
    Gi0/23       0   0
    Gi0/24       0   0
    Gi1/1       0   0
    Gi1/2       0   0
    Gi1/3       0   0
    Gi1/4       0   0
    Te1/1       0   0
    Te1/2       0   0
    Total Ports : 30
    Switch Receive Bandwidth Percentage Utilization  : 0
    Switch Transmit Bandwidth Percentage Utilization : 0
    Switch Fabric Percentage Utilization : 0
    XXX-Switch1#show interfaces | include packets
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         5934288 packets input, 546197579 bytes, 0 no buffer
         308885 packets output, 112398123 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 471000 bits/sec, 109 packets/sec
      5 minute output rate 191000 bits/sec, 104 packets/sec
         315586906 packets input, 252876271812 bytes, 0 no buffer
         0 input packets with dribble condition detected
         267801306 packets output, 88017856802 bytes, 0 underruns
      5 minute input rate 52000 bits/sec, 37 packets/sec
      5 minute output rate 55000 bits/sec, 37 packets/sec
         120529568 packets input, 27639696244 bytes, 0 no buffer
         0 input packets with dribble condition detected
         141742070 packets output, 32628299588 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         5028 packets input, 468079 bytes, 0 no buffer
         0 input packets with dribble condition detected
         7868783 packets output, 893479978 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         27290987 packets input, 25279841114 bytes, 0 no buffer
         0 input packets with dribble condition detected
         34291062 packets output, 16098960773 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 2 packets/sec
         3431939 packets input, 1615199699 bytes, 0 no buffer
         0 input packets with dribble condition detected
         20491634 packets output, 4044194406 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         21992856 packets input, 7784577454 bytes, 0 no buffer
         0 input packets with dribble condition detected
         47483488 packets output, 32259133953 bytes, 0 underruns
      5 minute input rate 4000 bits/sec, 2 packets/sec
      5 minute output rate 4000 bits/sec, 3 packets/sec
         17585313 packets input, 6353936617 bytes, 0 no buffer
         0 input packets with dribble condition detected
         40272645 packets output, 23412383942 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         15684208 packets input, 5064927935 bytes, 0 no buffer
         0 input packets with dribble condition detected
         37918769 packets output, 18601560856 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         3150289 packets input, 734752119 bytes, 0 no buffer
         0 input packets with dribble condition detected
         19003285 packets output, 2764534874 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         9029922 packets input, 2596828776 bytes, 0 no buffer
         0 input packets with dribble condition detected
         26350637 packets output, 9197196784 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         7064148 packets input, 2426044345 bytes, 0 no buffer
         0 input packets with dribble condition detected
         22569075 packets output, 8606781954 bytes, 0 underruns
      5 minute input rate 2000 bits/sec, 1 packets/sec
      5 minute output rate 6000 bits/sec, 3 packets/sec
         17875471 packets input, 6103242910 bytes, 0 no buffer
         0 input packets with dribble condition detected
         36793666 packets output, 17156441845 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         19264746 packets input, 8318993561 bytes, 0 no buffer
         0 input packets with dribble condition detected
         40577274 packets output, 20008103681 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         1073682 packets input, 524894617 bytes, 0 no buffer
         0 input packets with dribble condition detected
         1290197 packets output, 967649887 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         1434841 packets input, 399859897 bytes, 0 no buffer
         0 input packets with dribble condition detected
         15034817 packets output, 1988146136 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 31000 bits/sec, 1 packets/sec
         18246575 packets input, 8048146812 bytes, 0 no buffer
         0 input packets with dribble condition detected
         34632744 packets output, 15331407257 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         12575644 packets input, 3507267403 bytes, 0 no buffer
         0 input packets with dribble condition detected
         27415447 packets output, 13019686162 bytes, 0 underruns
      5 minute input rate 9000 bits/sec, 1 packets/sec
      5 minute output rate 60000 bits/sec, 2 packets/sec
         16988554 packets input, 6347935146 bytes, 0 no buffer
         0 input packets with dribble condition detected
         40488073 packets output, 23658053615 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 2 packets/sec
         1775464 packets input, 456920432 bytes, 0 no buffer
         0 input packets with dribble condition detected
         5550312 packets output, 848939175 bytes, 0 underruns
      5 minute input rate 74000 bits/sec, 62 packets/sec
      5 minute output rate 276000 bits/sec, 66 packets/sec
         38109701 packets input, 21483991198 bytes, 0 no buffer
         0 input packets with dribble condition detected
         53920463 packets output, 35745966772 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 2000 bits/sec, 2 packets/sec
         3905203 packets input, 1197213173 bytes, 0 no buffer
         0 input packets with dribble condition detected
         9322988 packets output, 3398916481 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         31147644 packets input, 7922363688 bytes, 0 no buffer
         0 input packets with dribble condition detected
         64110078 packets output, 59004959626 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         5916020 packets input, 2203139928 bytes, 0 no buffer
         0 input packets with dribble condition detected
         17783154 packets output, 6763038614 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
    XXX-Switch1#show interfaces | include line protocol
    Vlan1 is up, line protocol is up
    FastEthernet0 is down, line protocol is down
    GigabitEthernet0/1 is up, line protocol is up (connected)
    GigabitEthernet0/2 is up, line protocol is up (connected)
    GigabitEthernet0/3 is up, line protocol is up (connected)
    GigabitEthernet0/4 is up, line protocol is up (connected)
    GigabitEthernet0/5 is up, line protocol is up (connected)
    GigabitEthernet0/6 is up, line protocol is up (connected)
    GigabitEthernet0/7 is up, line protocol is up (connected)
    GigabitEthernet0/8 is up, line protocol is up (connected)
    GigabitEthernet0/9 is up, line protocol is up (connected)
    GigabitEthernet0/10 is up, line protocol is up (connected)
    GigabitEthernet0/11 is up, line protocol is up (connected)
    GigabitEthernet0/12 is up, line protocol is up (connected)
    GigabitEthernet0/13 is up, line protocol is up (connected)
    GigabitEthernet0/14 is down, line protocol is down (notconnect)
    GigabitEthernet0/15 is down, line protocol is down (notconnect)
    GigabitEthernet0/16 is up, line protocol is up (connected)
    GigabitEthernet0/17 is up, line protocol is up (connected)
    GigabitEthernet0/18 is up, line protocol is up (connected)
    GigabitEthernet0/19 is up, line protocol is up (connected)
    GigabitEthernet0/20 is up, line protocol is up (connected)
    GigabitEthernet0/21 is up, line protocol is up (connected)
    GigabitEthernet0/22 is up, line protocol is up (connected)
    GigabitEthernet0/23 is up, line protocol is up (connected)
    GigabitEthernet0/24 is down, line protocol is down (notconnect)
    GigabitEthernet1/1 is down, line protocol is down (notconnect)
    GigabitEthernet1/2 is down, line protocol is down (notconnect)
    GigabitEthernet1/3 is down, line protocol is down (notconnect)
    GigabitEthernet1/4 is down, line protocol is down (notconnect)
    TenGigabitEthernet1/1 is down, line protocol is down (notconnect)
    TenGigabitEthernet1/2 is down, line protocol is down (notconnect)
    XXX-Switch1#show interfaces | include line errors
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 2 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 1 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 output errors, 0 collisions, 0 interface resets
         Dave

  • Cisco Network Assistant (CNA) 2960X Support

    Hi Folks,
    The 2960X datasheet indicates that it supports Cisco Network Assistant (CNA), but when I tried it with CNA 5.8.7 it was not compatible. The release notes for 5.8.7 did not include the 2960X as a  supported device.
    CNA 5.8.7 Release Notes:
    https://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-577519.pdfhttp://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html
    Can someone confirm if CNA will have support for the 2960X series in the future and if possible provide some guidelines on timing?
    Thanks,
    Chris

    You're welcome.
    I know the product team monitor the Network Management Forum. If you post your question there, one of them may pick up on it.
    The CNA support typically lags the new product release by about 4-6 months, sometimes longer depending on how well the hardware product release matches up with the network management product's latest release date. The 2960XR just started shipping in July 2013 so a good guess would be that CNA might support it in the next release (5.9?). That's just a guess though.

  • Cisco Network Assistant - Why "No IP Address"?

    I've recently updated Cisco Network Assistant to the latest verison -  5.8 (9.1) but I'm seeing something I've never noticed before.
    In the Topology view one of my 3750's displays "No IP Address"  underneath it, but it does have an IP address set on Vlan245. Admittedly  Vlan1 has "no ip address" set but this is the same setup as another  3750 in that community which *does* show the correct IP address!
    If I right click the switch with the error and click "Properties" the correct IP address is shown (see below).
    I  don't know if this may have a bearing on the error but both the 3750's  in the topology were previously stacked, though we purposely broke the  stacking some time ago.
    Also some other things:
    I don't like having to give permissions in my "Program Files" to get the application working - bad practise!
    I don't ike the Courier-style font in the Device Authentication  dialog that pops up after selecting a community - it looks completely  alien to the rest of the application
    Hope someone can suggest something or fix CNA.
    Thanks.
    Craig

    Try creating a new network location.
    System Preferences -> Network -> Location

  • Cisco Network Assistant topology view problem

    hello! I have a problem. I just installed Cisco Network Assistant on my computer, scanned the network and found my switches. The problem is that when the program builds the topology, it desplays the switches in two raws but doesnt draw the links between them. Before installing CNA, i configured the switches with the following commands to enable CNA to see them:
    switch# conf t
    switch(config)# ip http server
    switch(config)# ip http secure-server
    switch(config)# ip http max-connections 16
    switch(config)# ip http ip timeout-policy idle 180 life 180 requests 25
    switch(config)# end
    switch#
    Is there any other settings that i have to make for CNA to show the links between the switches? Thank you very much!

    Both the Catalyst 4506 and 4506-E are supported by CNA. You need to verify reachability from the CNA host and that the target Catalyst has the http (or https) server active. With that, it should work fine.

  • Cisco Network Assistant, unable to add a switch

    I have a network running some 20 switches, two controllers and many AP's.  All the devices that should be able to connect to cisco network assistant can successfully.  However there is one switch that will show in neighbours but will give the message of “unable to connect to device” when I try and add it to the topology. 
    As far as I can see the config is identically to all other similar switches in the network.  I can telnet from a switch (management VLAN) to the switch in question.  However when I try to ping or telnet from the PC running network assistant (different subnet) I am unsuccessful.  However I can ping/telnet to all other cisco device from this PC. 
    The switch is a WS-C3560-48TS and I have included the config for firstly the switch in question and another switch of the same model and config that works correctly.  Any help would be greatly appreciated, thank you.    
    sho run
    Building configuration...
    Current configuration : 7363 bytes
    version 12.2
    no service pad
    service timestamps debug datetime localtime
    service timestamps log datetime localtime
    service password-encryption
    hostname wc3_switch_1
    enable secret 5 $1$Fn0U$2rG6DadA8JSUzQzSNmMc4/
    enable password 7 1511021F0725
    username dis privilege 15 secret 5 $1$b3d.$S43CM1xtXyEtO5Rsil6Bn1
    username admin privilege 15 password 7 0811185C224C543341
    no aaa new-model
    ip subnet-zero
    ip routing
    no ip domain-lookup
    no file verify auto
    spanning-tree mode pvst
    spanning-tree extend system-id
    vlan internal allocation policy ascending
    interface FastEthernet0/1
    description ### Connected to Parkside-AP05 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/2
    description ### Connected to Parkside-AP06 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/3
    description ### Connected to Parkside-AP07 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/4
    description ### Connected to Parkside-AP08 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/5
    description ### Connected to Parkside-AP12 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/6
    description ### Connected to Parkside-AP13 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/7
    description ### Connected to Parkside-AP20 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/8
    description ### Connected to Parkside-AP21 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/9
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/10
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/11
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/12
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/13
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/14
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/15
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/16
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/17
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/18
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/19
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/20
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/21
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/22
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/23
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/24
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/25
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/26
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/27
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/28
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/29
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/30
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/31
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/32
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/33
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/34
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/35
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/36
    description ### Connected to Parkside-AP36 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/37
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/38
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/39
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/40
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/41
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/42
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/43
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/44
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/45
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/46
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/47
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/48
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface GigabitEthernet0/1
    description *** Connected to WC2A_Core_Switch ***
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface GigabitEthernet0/2
    description *** Connected to wc3_switch_2 ***
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface GigabitEthernet0/3
    shutdown
    interface GigabitEthernet0/4
    shutdown
    interface Vlan1
    ip address 10.0.0.31 255.255.255.0
    ip default-gateway 10.0.0.254
    ip classless
    ip http server
    control-plane
    line con 0
    password 7 144711185D07
    logging synchronous
    login local
    line vty 0 4
    password 7 144711185D07
    logging synchronous
    login local
    line vty 5 15
    password 7 094F471A1A0A
    no login
    end
    wc3_switch_2#sho run
    Building configuration...
    Current configuration : 7239 bytes
    version 12.2
    no service pad
    service timestamps debug datetime localtime
    service timestamps log datetime localtime
    service password-encryption
    hostname wc3_switch_2
    enable secret 5 $1$Sfoj$a6AdO7PI0bP8ERhpWl3OP.
    username dis privilege 15 secret 5 $1$D9c6$16yFzETOxBNHiPdTEqkxQ1
    username admin privilege 15 password 7 133543002059550E78
    no aaa new-model
    ip subnet-zero
    no ip domain-lookup
    no file verify auto
    spanning-tree mode pvst
    spanning-tree extend system-id
    vlan internal allocation policy ascending
    interface FastEthernet0/1
    description ### Connected to Parkside-AP24 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/2
    description ### Connected to Parkside-AP27 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/3
    description ### Connected to Parkside-AP28 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/4
    description ### Connected to Parkside-AP30 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/5
    description ### Connected to Parkside-AP31 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/6
    description ### Connected to Parkside-AP32 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/7
    description ### Connected to Parkside-AP33 ###
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/8
    description *** Curric4 VLAN Port ***
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface FastEthernet0/9
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/10
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/11
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/12
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/13
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/14
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/15
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/16
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/17
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/18
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/19
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/20
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/21
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/22
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/23
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/24
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/25
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/26
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/27
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/28
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/29
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/30
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/31
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/32
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/33
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/34
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/35
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/36
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/37
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/38
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/39
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/40
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/41
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/42
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/43
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/44
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/45
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/46
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/47
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface FastEthernet0/48
    description *** Curric4 VLAN Port ***
    switchport access vlan 6
    spanning-tree portfast
    interface GigabitEthernet0/1
    description *** Connected to wc3_switch_1 ***
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface GigabitEthernet0/2
    description *** Connected to wc3_switch_3 ***
    switchport trunk encapsulation dot1q
    switchport mode trunk
    spanning-tree portfast
    interface GigabitEthernet0/3
    shutdown
    interface GigabitEthernet0/4
    shutdown
    interface Vlan1
    ip address 10.0.0.32 255.255.255.0
    ip default-gateway 10.0.0.254
    ip classless
    ip http server
    control-plane
    line con 0
    password 7 135514015A0F
    logging synchronous
    login local
    line vty 0 4
    password 7 135514015A0F
    logging synchronous
    login local
    line vty 5 15
    no login
    end

    The switch configurations look pretty straightforward and mostly correct.
    I notice that the problem switch has "ip routing" global command. Why is that necessary? You are only using it as a L2 switch, yes?  If you use "ip routing" and have no routing process (ospf, eigrp, etc.) running you would need to add a static default route (ip route 0.0.0.0 etc.) and not use the "ip default-gateway" command. Otherwise the switch itself (the SVI) does not know how to leave the management VLAN routing-wise since it is the only L3 interface defined.
    (I might also add "ip http authentication local" on each and I'd definitely disable telnet in favor of ssh)

Maybe you are looking for

  • Migration of balances for new ledger using the New GL

    Hi everyone, I have a specific scenario into this customer where we have implemented the SAP version ECC6.0 with the table FAGLFLEXT is active and using just one ledger (0L - standard). We need to create a new ledger for IFRS (e.g: 1L), as the custom

  • Various problems with iPhone 3G

    I got my iPhone on September 17th. Since then, I have had the following problems: 1) Dropped calls 2) Delays in getting/sending text messages - sometimes they come all at once, sometimes they wait an hour to be delivered 3) It crackles when I hold th

  • RAM Previews No Longer Real Time

    Work computer.   Mid 2010 Mac Pro with 64GB of RAM.  Running After Effects version 11.0.4.2.   Multiprocessing off.   AJA Control Panel v3. 1920 x 1080 comps, 29.97 fps, no 3D. The Mac was running Mountain Lion and RAM previews were FINE.  Zero issue

  • SAVE: still having to click twice

    1. load 10.6.1 onto Macbook Pro 2. go to www.wikipedia.com 3. find an article 4. save as .PDF format 5. document will default to correct name, and 10.6.1 will ask you where to save. 6. click save. dialogue should disappear 7. instead - it represents

  • DSM window is a big window with log in it

    All, I have a strange issue. On some PC's, when the user logs off or switches from one scrren to another, the DSM window opens.  This is what I would expect.  However, it opens a large window (around 1/3 of the screen) rather than a very small one.