Cisco Personal Communicator with third-party cameras

Was anyone able to use third-party cameras with CUPC? Which models?

Try:
http://www.cisco.com/en/US/products/ps6844/prod_release_note09186a00805f6b3f.html

Similar Messages

SX20 with Third Party Camera

Hi Team,
Can we Connect Cisco SX20 with 3rd Party Camera???
Since SX20 12X Comes with a Breakout Cable of HDMI + Power & Control.
Only Requirement is for Video. Third party Camera has HDMI Output.
Camera Control & Device Control will be Done by Crestron.
Someone Pls Help on this.....
Thanks & regards,
Bharath

Hi Patrick,
Thanks for your Time & Reply.
Actually this Solution is for one of my Client.
Just got an Update from them, they are using Sony Camcorders through HDMI Switcher.
They will be Connecting 3-4 Camcorders to Switcher & Will Switch Accordingly.....
Will SX20 Support??? Only For the Video??? Since VC they will control it through Crestron Mechanism.
Thanks & regards,
Bharath

Cisco ISE integration with third-party firewalls

Can Cisco ISE be integrated with a third-party firewall (such as Checkpoint), to provide authentication/authorization services to remote VPN user devices (based on device MAC address)?
The remote user would establish a VPN connection to a third-party firewall, based on a username/password authentication, but the user would only be allowed to send/receive traffic to the internal network if the MAC address of the device being used was authorized by Cisco ISE.
Thank you in advance.

Rui,
I do not think the vpn client sends the ip address in a called-station-id, that might be the public ip address that the client is initiating the request from. If you have an existing radius server or can run a packet capture you should be able to verify that.
If the client does send the mac address in the radius packet then you can create a custom condition that can be used to check the mac address along with the username to allow it access to the session. However in VPN deployments there is no concept of profiling since 802.1x deployments usually include the client's mac address.
Thanks,
Tarik Admani
*Please rate helpful posts*

Configuring PI SSL for communicating with third-party web services

Hi,
I'm trying to load a COMODO certificate into a J2EE environment running in NetWeaver 7 (no enhancement packs), in order to connect to an external web service using SSL
I have been looking at this reference:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/a5d13f83a14d21e10000000a1550b0/frameset.htm
and in this document (and many others i've read) it talks about requiring a server key pair to support SSL.
http://help.sap.com/saphelp_nw70/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
My question is - is there a way to use the self-signed root CA certificates instead of having to generate CSRs and sign certs? I ask this because it seems completely impractical to have to generate key pairs for each SAP installation that is required to access a third-party web service.
Furthermore, the SSL connection may only be for the web service and I'd rather not have to ask that the entire J2EE server is switched to SSL in order to make this secure connection. I've recently discovered the AXIS framework for the SOAP adaptor however I'm not familiar with it and can't identify whether you could use this for the SSL handshake and avoid having to a) generate certificate key pairs and b) switch your J2EE server to SSL
Does anyone have experience connecting to a third-party service using VeriSign, COMODO or Thawte certificates and can clear this up for me?
Regards,
John

Did you resolve your issue?
I´m posting some comments that maybe can help newer administrators facing similar doubts.
I´m using NW PI 7.1 EHP1 also and some interfaces were developed for using an external site providing web services through SSL (HTTPS) connection.
As in browser navigation, secure sites protected with SSL has a certificate emited by a international CA. We didn´t perceive the "handshake" in the most of cases because normally the web browser has a group of trusted CAs loaded on its certificate store.
With SAP PI and its WAS Java a similar procedure occurs with a small difference. The WAS Java didn´t have the trusted CAs loaded on KeyStorage. So, when the adapter tries to establishing a connection with an HTTPS site (it is a background process) a "handshake" is required to accepting the certificate and produces a error.
We completes the handshake importing the entire certificate chain (you can upload the site´s certificate to your browser and export it as file) on Keytore under the Trusted CAs view.
Hope this can help someone. It´s an "easy" part of SSL communication.
Now I´m trying to configure the inverse: Some third party consuming the PI web services using SSL. I have an additional component on inbound/ incoming connections that is the SAP Web Dispatcher.
The Help.sap.com is the reference but as always its a little difficult to find the (sequential) path following the links (go ahead, go ahead, go ahead, go back, go back, go ahead)...
Regards,
Rodrigo Aoki

Communicating with Third Party System

Dear All
I have a scenario where I want to send Idoc PEXR2002 to a bank.
SAP 4.6C --> PI -
> Bank
I have made all the configurations to send the idoc to PI and I am sending the Idoc to PI using partner type Bank SAPPI successfully but in PI I am getting the error that receiver agreement not found.
I have created the Bank as a Third Party System in SLD but I am not sure how to link this third party system in ID (Integration Directory) .
My questions are
How to link the third party system created in SLD with ID to send the IDOC using a HTTP Adapter i.e should I create the third party as a Business System or Business Service in ID.
Second Question is while sending the IDOC from 4.6C to PI what kind of partner type I will use LS or Bank.

Hi Adnan,
Its complaining about the receiver agreement. So you need to make the receiver agreement. You can have a 3rd party business system for the bank and create teh receiver agreement between your sap business system and for this one. Add your bank receiver communication channel in this receiver agreement. Then it should work. Since you are using PEXR2002 idoc then you dont need to create sender communication channel and sender agreement.
In Sap while you create partner profile you can use bank as partner type.
Regards,
---Satish

Communication with third party

Hi Folks,
I need to communicate between a 3rd party and SAP system through SAP XI as a middleware. If I have the ip adress of the 3rd party how I'm going to connect the third party. If at all I'm able to connect to SAP XI from the 3rd party then how can I get the response from XI to the 3rd party system. Let us asume 2 scenarios , 1st - we have a webservice and 2nd - no webservice communication.
Regards.....

Hi Nayak,
> we have a webservice
If you have a webservice then you can directly connect to xi using soap adapter. Once you receive data you need to have a rfc to send the response back to webservice. Please check this blogs. YOur integration will be opposite to this blogs:
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
>no webservice communication
If it is within network then you can ask them to put a file and then you can read the file using file adapter. Once you have read the file you can send to rfc in sap and the response from rfc you can write as another file. Earlier we used to use BPM for this approach but now you can do with out BPM also. Please check this bhavesh thread:
File - RFC - File without a BPM - Possible from SP 19.
If you want to use BPM then you can refer:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Regards,
---Satish

Really Apple? OSX 10.8.5 disables built-in camera functionality with third party apps such as Skype and Gmail video chat. I do not have time machine on my 2013 MB Air. How can I get back to 10.8.4?

Really Apple?
With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
I do not have a time machine bkup as this computer is not used to store important documents.
Thank you.

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

Replace Self-Signed FAST Search Certificate with Third Party Certificate

We are trying to replace the Self-Signed FAST Search Certificate with Third Party Certificate in our SP 2010 environment. And are facing issues while enabling the SSL communication between the FAST servers and the corporate servers.
Our FAST search servers are in a different farm than that of the Corporate Servers.
The details of the certificate we received is as follows:
Issued to : FastSearchCert
Issued By: Issuer Name
Valid From: 4/21/2015 to 4/20/2017
We were able to successfully renew the certificate on the FAST Search Server by following the below steps:
1. Login to the Administrative and the Non-Administrative nodes
of the FAST server. Go to Windows Service and stop the FAST Search for SharePoint and the FAST Search for SharePoint Monitoring services in both the servers.
Follow the below steps in the Administrative Node followed by the Non-Administrative Node
2.
Install the certificate in the following paths in the certificate store:
“Certificates(Local Computer)\Personal”
“Certificates(Local Computer)\Trusted Root Certification Authorities”
3. Ensure that the user account configured for the “FAST Search Server 2010 for SharePoint” has access to the private key of the certificate.
4. Go the Administrative node of the FAST farm and follow the below steps:
Go to the certificate store.
Expand the Personal folder and then click the Certificates folder. Double-click the third party signed FAST certificate.
Open the Details tab and then click Thumbprint. Note down this thumbprint.
5. Next, open
Microsoft FAST Search Server 2010 for SharePoint with Administrator
Privileges.
6.
Navigate to the directory, “D:\FASTSearch\installer\scripts” and execute the below command to replace the current certificate with the newly created
third party signed FAST certificate.
.\ReplaceDefaultCertificate.ps1 -thumbprint "certificate thumbprint".
7. The FAST certificate was renewed successfully.
Once the certificate has been renewed successfully in both the nodes, follow the below step:
8. Start the FASTSearch for SharePoint and the FAST Search
for SharePoint Monitoring services in the administrator server.
Next, while enabling the SSL communication between the FAST servers and the other corporate servers, we follow the below steps:
1.
Copy the new certificate from any of the FAST servers to all the web-front end and application servers in the corporate farm, in order to enable SSL communication between these servers and the FAST farm.
2. Also, copy the script
‘SecureFASTSearchConnector.ps1’ from the location “%FASTSearchFolder%\installer\scripts” in the FAST servers
to the web-front end and application servers of the corporate farm.
3. Follow the below steps on each of the servers in the corporate farm:
Open ‘SharePoint 2010 Management Shell’ with administrator privileges and navigate to the directory in which
SecureFASTSearchConnector.ps1’ script is located.
And then, execute the below command:
.\SecureFASTSearchConnector.ps1 -certThumbprint "certificate thumbprint" –ssaName “FASTCibtebtSSA” –username “DOMAIN\SP_Farm”
Where,
-certThumbprint
- Thumbprint of the certificate
-ssaName – FAST Content SSA
-username – The account configured to run the SharePoint
Search Service
On execution of the above command, we receive an error message stating that the "Connection to the Content Distributor servername.corp.abc.org: 14391 could not be validated...instance of FAST search server backend is running"
Please help us resolve this issue. We have not been able to find the cause of the above error for a long time.
Any help is much appreciated.

Your tip on exporting from eDir to locate a missing private key was very helpful. Here are my steps to renew an expired third party certificate when the private key, generated 30 months ago in my case, could not be located.
In iManager, browse the tree and locate the likely certificate object. The Attributes for the object show Subject Name = webmail.acme.com. Selected the certificate and exported to webmailcert.pfx.
Then, the openssl commands in TID 7004039, "How to convert a SSL PFX to a PEM file", were run against the .pfx file to create cert.pem, key.pem and server.key files.
TID 7015500, "How to determine if private key belongs to public key (certificate)", was followed to determine if the public key (downloaded from third party) and private key (just retrieved from iManager) match - they did - that is, the private key converted from webmailcert.pfx matches the downloaded certificate.
TID 7013103, "How to create a .pem File for SSL certificate Installations", was followed to manually create a server.pem file using openssl.
TID 7010584, "How to setup SSL Certificate for Apache", part labeled "Additional Information" was followed to modify /etc/apache2/vhosts.d/vhost-ssl.conf file. Server.pem file created above copied to /etc/apache2/ssl.crt/ and /etc/ssl/servercerts/ directories as specified in vhost-ssl.conf.
Restarted apache2.
www.digicert.com has an SSL Certificate Checker that can be used to verify the installation is successful.

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

Configure sap xi with third party application?

Hi fredz,
Can any pls explain with technical details and steps how do i configure sap xi with third party application and what type of connectivity and interfacing communication channel is preffered?
Is there any option to web-services for interfacing between SAP system-SAP XI system-Third party Application.
Pls be specific if and only if u have done this scenario.
Regards,
Ameet
Message was edited by:
Ameet Jassani
Message was edited by:
Ameet Jassani

Hi
 
This is a very generic question. There are some getting started guides available in the main XI section on SDN, and also some step-by-step guides in the wiki section. A quick search will get you tons of information.
 
The choice of connectivity and interfacing communication channel is really dependent on the capabilities of the third party system.
 
Also, to get good results on this forum, please read the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>
 
Regards
Manish

Apps Secretly Sharing Personal Data With Third Parties--

just read this article on the huffingtonpost.com
how can i tell who is obtaining persoanl data without telling me ?
are there supposed to be safeguards against this ?
*what can i do to prevent this ?*
*Apps Secretly Sharing Personal Data With Third Parties--Without Telling You*
JORDAN ROBERTSON | 07/28/10 10:40 PM | AP
LAS VEGAS — Your smart phone applications are watching you – much more closely than you might like.
Lookout Inc., a mobile-phone security firm, scanned nearly 300,000 free applications for Apple Inc.'s iPhone and phones built around Google Inc.'s Android software. It found that many of them secretly pull sensitive data off users' phones and ship them off to third parties without notification.
That's a major concern that has been bubbling up in privacy and security circles.
The data can include full details about users' contacts, their pictures, text messages and Internet and search histories. The third parties can include advertisers and companies that analyze data on users.
The information is used by companies to target ads and learn more about their users. The danger, though, is that the data become vulnerable to hacking and use in identity theft if the third party isn't careful about securing the information.
Lookout reported its findings this week in conjunction with the Black Hat computer security conference in Las Vegas.
Lookout found that nearly a quarter of the iPhone apps and almost half the Android apps contained software code that contained those capabilities.
The code had been written by the third parties and inserted into the applications by the developers, usually for a specific purpose, such as allowing the applications to run ads. But the code winds up forcing the application to collect more data on users than even the developers may realize, Lookout executives said.
"We found that not only users, but developers as well, don't know what's happening in their apps, even in their own apps, which is fascinating," said John Hering, CEO of the San Francisco-based Lookout.
Part of the problem is smart phones don't alert users to all the different types of data the applications running on them are collecting. IPhones only alert users when applications want to use their locations.
And while Android phones offer robust warnings when applications are first installed, many people breeze through them for the gratification of using the apps quickly. Google said it tries to limit users' risk with the warnings but consistently advises users to only install apps they trust.
Apple didn't respond to a request for comment on Lookout's research.

The best way to handle this, depending on the app, is to turn off things like sharing on the world wide boards. (This can often be done in settings, although you may have to do so in app.)
Also--and this may sound a bit lame--choose your apps (especially free ones) carefully. There are a whole range of games that all track certain info bits. I have a few of those, but have have turned off that part of it.
Finally...the same things go for apps as with any program for your computer: use common sense.
Doc

Motion control: PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2

Dear community,
This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
Hau Nguyen.

Dear Community,
I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
Hau Nguyen.

Uninstalling a third party camera?

I have drivers for a third party camera installed, (specifically vupointsolutions) and I read that those drivers that were installe may be interfering with my iSight, and that is why it is no longer working. I dont want to do a whole restore, so if anyone could tell me where these drivers were installed and how I could go about uninstalling them? I would greatly appreciate the assistance. Thanks in advance!

You could try a spotlight search using 'vupointsolutions' ...make sure you allow spotlight to search your complete drive.
Also, sometimes driver installers will tell you where they will put stuff (sometimes even have an uninstaller), so you might want to find/launch the installer again to see if it gives you any clues as to where things are going.

How to integrate single sign on with third party system

we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep

Cisco Personal Communicator with third-party cameras

Similar Messages

Maybe you are looking for