Cisco Prime and WLC packet capture error - Request Timed Out

Hello,
We have a Cisco Prime installation (2.2.0) and a WLC (Cisco 5508)
I’ve been trying to test the wireless packet capture function, but have now run into problems, a quick rundown of my actions so far:
Selected a wireless access point in Prime and clicked ‘Packet Capture’
Did a packet capture saving to the PI, the capture worked fine
Could not find any way to delete the packet capture
Selected a wireless access point in Prime and clicked ‘Packet Capture’
Did a packet capture saving to an FTP server, the capture worked fine
The 1st capture had finished (10 minute capture) before testing the second
The 2nd capture has also finished and saved the files to the FTP server as specified
Now though I cannot capture from any access point as when I click ‘Packet Capture’ I get the error:
“Request Timed out. Error in getting data from server.”
The error is ‘instant’ as in no delay indicating something actually timing out.
So the 2 problems I have are:
How do I fix the ‘request timed out’ error above
How do I delete old packet captures from the PI
I hope someone can help as I can’t find any info on either of the problems.
Cheers
Adrian

I think I've solved (2) by deleting the files from the FTP directory on the prime box through SSH.
So I'm now just stuck on the timed out error.

Similar Messages

HT2186 I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Cisco Prime and WLC audit

Hello,
Is there an automated way to perform audit of Wlc from the Cisco Prime Infrastructure GUI? I use to go to Monitor->Controller, then check the box near one of the managed wlc, finally choosing 'Audit Now' on the top menu. It works fine, but when you have multiple wlcs, such operation takes a long time. I would like to retain the configuration which is on the wlc instead of the one on the PI database too.
Do you know if there is a better way to perform the audit?
Thanks
Théophile

Have you looked at the background task to see if there is an audit there? Are you really wanting to audit or just refresh the config from the WLC? If you do hate getting the mismatch and dine have all the templates for each of the WLC's, the audit only reviews what's in the templates. Refresh the config from the WLC is the easiest way as you can select all of your WLC and perform this task.
Sent from Cisco Technical Support iPhone App

Cisco Prime and WLC HA-SSO

Hi All.
i implemented the HA_SSO on two wlc, WLC1 Active and WLC2 Hot Stanby and the system works fine.
My question reguarding the monitoring. Is Possible monitoring to the WLC Secondary?
if by chance the wlc standby should be broken as I can realize this fault?
Regards

Is Possible monitoring to the WLC Secondary?
Currently, the answer is NO. Wait a few more months. If I remembered correctly, this feature has been asked several times and might actually be incorporated with CPI 3.0 which is rumoured to be released on May/June 2015.

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102) "

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software

http://www.apple.com/support/mac/app-store/contact.html?form=account

Cisco Prime and Maps

Hi
When you create a map in Cisco Prime and place the APs, does this effect in any way the RRM configuration on the AP's? or there power\channel selection?
Or are the maps a purely passive tool?
Thanks in advance

RRM operates at the controller level. Prime maps are passive only and have no impact on RRM. The maps are more of a visual/graphical tool for heatmaps and planning scenarios.

HOW TO: Resolve 'An error has occurred: Request timed out' issue

Post Author: fmi-charles
CA Forum: Crystal Reports
After doing a new install of BOE Server software, encountered a problem viewing long running reports on-demand. InfoView displayed: 'An error has occurred: Request timed out.' Couldn't find answers anywhere (not even on this site) that would help me resolve this issue. So, I decided to post the resolution.
The error from this post's subject line is displayed when viewing on-demand reports that run for longer than 90 seconds. If the report was scheduled, it wouldn't have a problem - only viewing on-demand. This issue transpires with the following setup: * M$ Windows 2003 Server * IIS v.6 * .NET 2.0.50727 * BO Enterprise Server XI R2 SP2 * M$ SQL Server 2005
The resolution is to find the 'machine.config' file for your current version of the .NET Framework (e.g. C:\WINDOWS\Microsoft.NET\Framework \v2.0.50727\CONFIG\machine.config). Edit the file and place the following into a new line within the 'system.web' section: <httpRuntime executionTimeout="3600"/>
The timeout is set in seconds.
Then, restart IIS using the command line.

Hello Cristinel -
Thanks for send your inputs but I have solved this error.
I would like that if you solve my this question.
My project's URL is http://www.lampslightingandmore.com/
I want to put w3stander HTML logo in my website.
I have done many error but some error i could not understand.
please click on below url and send me your suggestion how to solve this errors?
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.lampslightingandmore.com%2F
I hope you send your best inputs.
Thanks

Checking for updates an error has occurred the request timed out

Whenever I try to check for an update to my software on my computer I get this message: "an error has occurred, the request timed out."
I have not been able to have a software update in many months. Any suggestions on how to fix this?
Thanks,
David

Quit all applications
Hold option key down and click the "Go" menu in the menu bar.
Select "Library" from the dropdown.
Library > Preferences
Look for the file com.apple.appstore.plist and move it to Trash.
Restart the computer.
Source:https://discussions.apple.com/message/20445064#20445064

Slow reports giving "An error has occurred: Request timed out" on first run

I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed.
Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re-run them then they come up almost straight away.
This tells me that the report runs and it gets stored in the cache server, which is fine, but I want to be able to eliminate the timeout for the users.
I found a solution if .Net 2.0 is installed (HOW TO: Resolve 'An error has occurred: Request timed out' issue) but my server only has .Net 1.1.
Is there a change to a timeout I can made to the server as it is, or should I install .Net 2.0 and change IIS to use that version of .Net then make the solution change already suggested?
TIA
I should add that the timeout is after around 5 minutes, so the normal changes recommended at note 1198539 doesn't seem to apply, as the timeout happens after the normal 90 seconds expires for some time.
Edited by: Geoff Croxson on Sep 3, 2009 2:02 PM

Will something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please

SSRS report- Request timed out error displaying when running.

I have a parameter which with other date ranges work but where the parameter for datetime is from 4/1/2013 to 5/1/2013 it brings this error:
Server Error in '/' Application.
Request timed out.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Request timed out.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Request timed out.]
How can I be able to determine the cause of this because the sql mgmt studio brings in the data really well at 15 seconds with hundreds of rows?
I am not trying to lessen the time for getting this data which one thing would be to reduce the amount of fields needed to lower reaction time for retrieving the data. I am just wondering why is it giving me this and what plans can I do to avoid these errors
from happening again?

Hi Elvin,
The issue might be related to the executionTimeout setting of the Web application. If you view the report in the report manager, please use the following steps to modify the web.config file:
Navigate to <Drive>:\Program Files\Microsoft SQL Server\MSRSX.<InstanceName>\Reporting Services\ReportManager, back up and then open the web.config file.
Search for httpRuntime.
Add maxRequestLength="100000" to the line of code, and reset the executionTimeout value so that the line looks like this:
<httpRuntime maxRequestLength="100000" executionTimeout="90000" />
If you view the reports on a SharePoint site, please modify the web.config file of the SharePoint Web application. For example, if the SharePoint Web application uses 80 port, then its web.config file is located in the C:\inetpub\wwwroot\wss\VirtualDirectories\80
folder.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

"An Error has Occurred. The request timed out." - OS X 10.8.2

I have Mountain Lion OS X 10.8.2 installed on my 15" Macbook Pro (Mid-2010).
Upon initiating Software Update, the App Store window appears > 'Checking for Updates' > results in: "An Error has Occurred. The request timed out." (after approximately of 30 seconds).
This is an on-going issue. The OS Firewall is disabled and no third party anti-virus/security software has been installed.
I have contacted Apple Technical Support and they advised the installation of Combo/Supplementary (10.8.2) software.
This was updated as advised; yet the same problem still exists!
Can anyone assist with a 'fix' for this issue and the reason why it is occurring please?

Will something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please

IPhone/iPad connection error after first login ok: The request timed out. (-1001)

Hi
I have installed SAP 9.0 PL 12, DI API all version, Integration Component of the SAP 9.0 PL12.
On my iPhone I have the 1.10.1 version of the app SAP.
I followed the directions provided in the note (also in 1602674) and in the forum, but nothing.
I start my PC (server with integration installed), do all the tests possible dall'integration admin and I always correct results.
Start app from my iphone, it connects to my DB but.... after a few minutes I get the error
"Connection Failed - The request timed out. (-1001)"
and then throws me out of the db.
If I try to reconnect, re-entering the password I have always the same error.
To reconnect, I have to restart the PC and the situation repeats itself (is the first logon, then I get the error and I can not reconnect).
Can anyone help me?
THANKS
NL

H Thusar
Update: I only changed the startup type of the service DI Proxy, Event, Integration, and instead of putting 'Automatic' I selected 'Automatic (Delayed Start)'.
I rebooted the server and I was able to connect the iPhone via app to my DB: I was about an hour, I created BP, made changes, displayed report.
I then did the logoff.
I tried to reconnect but nothing is returned the error 'Connection Failed - The request timed out. (-1001)'.
Even after restarting the server again, the app connects after about two minutes I get the error 'Connection Failed - The request timed out. (-1001)' and is no longer relates only after you restart the server.
Help
NL

Request timed out error

I am getting this error message. when I add
"The Exception: Oracle.DataAccess.Client.OracleException Connection
request timed out at ...
Oracle.DataAccess.Client.OracleConnection.Open()
as a temporary fix I added pool=false to the web. config file and works fine. my question is what is the disadvantage of adding this to the web.config file and if there is a better solution to fix this proble.
I am working with ODP.net 11.2
<add name="test" connectionString="Data Source=xx;User Id=xx;Password=xx;pooling=false" providerName="Oracle.DataAccess.Client"/>
Please let me know how this can be fixed. thank you

Hi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu

Error msg itunes store request timed out

i keep getting the msg "we could not complete your itunes store request. the request timed out. there was an error in the itunes store. please try again later" what is going on that i can no longer access itunes store??

I'm having the exact same problem. I've tried emailing Itunes support and they are morons. They completely fail to address teh problem. I emailed them reminding them that my computer far exceeds their requirements and that I don't have any other programs running but I haven't heard back yet. I'm planning to challenge the charge on my credit card. I will never purchase anything from Itunes again.
Here is what they suggest:
1) To use iTunes, your PC must meet the Windows system requirements listed here:
http://www.apple.com/itunes/download
(Note that installing the latest version of iTunes will not affect your library or any items in your account waiting to be downloaded.)
2) Quit as many other open applications as you can before playing videos in iTunes.
3) Wait for all iTunes Store purchases to finish downloading before playing videos.
4) Disable all non-Microsoft startup programs and services

Cisco Prime and WLC packet capture error - Request Timed Out

Similar Messages

Maybe you are looking for