Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

I am running Cisco Prime Infrastructure (2.1) that manages a Cisco 5508 WLC (7.6). We have multiple version of AP's managed by this WLC to include 1142, 2602, 3702, etc...In Cisco prime when we run a Rogue AP Report. None of the Rogue AP's discovered by 3702's are displayed in the report. The Rogues show on the WLC though from all AP's. Cannot find a reason for this. Any ideas?

The Rogue alarm state always stays on "removed" once deleted
CSCuo91446
Description
Symptom:
Once one of the alarm of rogue AP is deleted the newer rogue AP alarm changed to removed state even for different mac address.
Because of the removed state the detecting AP which detected the rogue is not displayed
Conditions:
1) Auto SPT is turned on
2) Prime 2.0 or 2.1
Workaround:
Click on refresh from network for each alarm in removed state or disable auto spt
Last Modified:
Jun 30,2014
Status:
Fixed
Severity:
3 Moderate
Product:
Cisco Prime Network Control System Series Appliances
Known Affected Releases:
(1)
2.1(0.0.1)

Similar Messages

Cisco Prime LMS Custom Reports

Hi I wonder if anyone can help.
Using the custom properties and query expression section in LMS Prime 4.1 I would like to create a report that checks the movement of end nodes.
For example I need to know if PC A on switch A has moved to switch B in the last month. I need to try and track the (unauthorised) movement of PCs on my network?
Perhaps I'm looking in the wrong field?
Any help in creating this report would be apprecaited.
Thanks
Rod

Ciscoworks has its own custom properitary database. You can create an ODBC connection to the data base and use excel, access, or sql management studio to create and develop custom reports.

Cisco Prime - Custom Inventory Change Report?

Hi,
Cisco Prime has this report:
Reports > Inventory > 24-hour Inventory Change
The problem is that the Report reports things that I don't want to track, like changes in "NVRAM Used", Interface Speed, etc...
Is it possible to configure Inventory Change so that it would not check some itens?
Thanks.

Thanks for answering,
my report has, for example, the following information:
Changes for Device: router01
Processor Identity: ProcessorID = 3
Attribute Type of Change Time Change Detected Previous Value Current Value
NVRAM Used (KB) Changed 2014-02-21 00:10:00.69 16923 16953
I saw that Syslog Automated Actions > Inventory Fetch has very useful configuratios, but I think that it is still not what I need. The screen you pointed out was related to messages from Syslog that triggers inventory collection.
What I need is in the image below.
All right, NVRAM changed it's current used size. For me, it is completely useless to know about that every day in my Inventory Change report. That information is flooding my report. How to remove it from future reports?
Thanks again!
Message was edited by: Leonardo Machado

User Name and Password for Cisco Prime Infrastructure 2.1

Hi all:
I am stuck at the login page of Cisco Prime Infrastructure 2.1.
I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
Thanks!
tangsuan

Hi Tangsuan,
Following is the documented procedure for password recovery..
In order to modify the GUI root user password, you will need to login to the NCS CLI
as an admin user, and enter the command
"ncs password root password <new password>" (without the quotes)
This should set the web interface root user password :
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
If you have lost your CLI password , try the default logging that is ,
CLI user is admin and not root, so please try logging in as admin with
the password that was set during setup. If that does not work , you need
the install disk that came with the appliance to recover that password.
Follow these steps:
Recovering a Lost Admin Password
If you lose or forget the admin password for NCS appliance, follow these steps.
Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
System Welcome screen appears:
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
             Welcome to Cisco Prime Network Control System
To boot from hard disk, press <Enter>.
Available boot options:
   [1] Network Control System Installation (Keyboard/Monitor)
   [2] Network Control System Installation (Serial Console)
   [3] Recover administrator password. (Keyboard/Monitor)
   [4] Recover administrator password. (Serial Console)
<Enter> Boot existing OS from Hard Disk.
Enter boot option and press <return>.
boot:
Step 2 Select the desired recovery option, 3 or 4, depending on how you
are connected to the appliance and then follow the prompts.
Thanks-
Afroz
***Ratings Encourages Contributors ****

Ciscoworks LMS 3.0 to Cisco Prime Infrastructure LMS 4.2

In order to complete the upgrade the LMS 3.x runs over a physical server that ends with the upgrade(server its gona be retired), the think is that the Cisco Prime comes with an UCS and its gona run over a VM. The question here is the "Cisco Prime Infrastructure 1.1 - Maj Upg from LMS 2.x/3.x" media could be runs as clean install, I mean with no LMS 3.x intalled before? an the "Prime Infrastructure LMS 4.2 - 1.5K Device Maj Upg Lic" could be registered with no license installed of LMS 3.x?

There are a couple of things to distinguish:
1. The product SKU you need to order to migrate from LMS 3 to LMS 4.2.
2. The license file that is installed on that new LMS server.
#1 is based on Cisco agreeing, usually through the partner or reseller you are working with, that you are entitled to order the upgrade SKU (vs. buy a complete new product). The upgrade SKUs are all listed in the ordering guide here.
L-PI12-1.5K-UP (note - NOT the 1.1 product description you noted in the original post) would be the SKU for a major upgrade from LMS 2.x/3.x to the current Prime Infrastructure 1.2 release at the 1500 device license level. That upgrade includes licenses for both PI 1.2 and Prime LMS 4.2. You may choose which to install - most LMS customers stick with LMS for now as PI 1.2 does not yet have full feature parity. Your managed devices should not exceed 1500 combined (in this case) but that combined number is not enforced technically by the product's license daemon.
Once you have purchased the product and have the media you can install it on any host that meets the installation prerequisites as far as OS, memory, disk etc. A clean installation of LMS does not check for or require a previous installation as far as technical checks.
#2 - Once you have installed the new LMS server (and optionally a step near the end of installation, you need to add in the license file (*.lic file). That is obtained through the Cisco licensing portal (or via the TAC if you prefer) using the Product Activation Key (PAK) received with your product.

Cisco prime 1.2

Hey guys!
We got damaged Prime 1.2 and i want to reimage it, but can't undesrtand how to do it. I got
NCS-APL-1.3.0.20-1-K9.iso, i know that is for 1.3 but i hope its not a problem. so idlike to perform full remage from this iso but when i burn thisto USB and trying to boot from it i got - no DEFAULT or UI directive and promt with boot: int console.
Could you guide me for step-by-step actions to reimage my prime 1.2 Physical APL ?
Thank you!

Hi Valery,
Instead of USB ,can you burn it on DVD and follow the below steps:
Step 3 Burn the ISO image file to a DVD.
Installing Recovery Image
Warning The following procedure will completely reinstall the appliance and all data on
the appliance will be removed. You must copy any data or files that you would like to keep
from the appliance before performing this procedure.
Step 1 Reboot the Cisco Prime Infrastructure appliance with the recovery ISO DVD inserted.
The Cisco Prime Infrastructure Welcome screen appears.
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
Welcome to Cisco Prime Network Control System
To boot from hard disk, press .
Available boot options:
[1] Network Control System Installation (Keyboard/Monitor)
[2] Network Control System Installation (Serial Console)
[3] Recover administrator password. (Keyboard/Monitor)
[4] Recover administrator password. (Serial Console)
Boot existing OS from Hard Disk.
Enter boot option and press .
boot:
Step 2 Select the desired install option, 1 or 2, depending on how you are connected to
the appliance.
The installation will take approximately 30 minutes. After the ISO image is installed, the
Cisco Prime Infrastructure appliance reboots. When the reboot completes, the following
prompt will appear and the appliance will be wiped clean.
Kindly type 'setup' to configure the appliance
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

SYSLOG Cisco Prime LMS

Hi friends,
I have a question about my syslog from Cisco Prime LMS 4.1, the hours from this syslog in the LMS is diferent from my switch log. I dont kown why.. I verified the hours betewen switch y the Cisco Prime is the same(the LMS is over Windows Server 2008R2) . both are the same log but in diferent hours about 5 hours.
maybe I have to configure the hours for Syslog in the Cisco Prime.
Log from Switch
Log from Cisco Prime LMS

If you have LMS, i am not sure, but if you have PI 1.2. Take a look at my post.
Basically, syslog feature doesn't work well. I could see couple of syslog through event / alarm, but syslog itself is not working properly.
https://supportforums.cisco.com/message/3861981#3861981

Cisco Prime Infrastructure 2.0 import image via WAN link failed.

Cisco Prime Infrastructure 2.0 behind NAT that can copy image on device to Cisco Prime infra but can not deploy from Cisco Prime Infra import image from device. How to solve problem,please ?

Have you downloaded and applied the latest Device Pack updates?
PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location.

Cisco prime network repository image asr903

I'm having an issue with Cisco Prime Network Repository Images getting image from ASR903 devices.
I am only obtaining the packages.conf file (bootvar is configured to boot from that file (boot system flash bootflash:issu/packages.conf)).
Any idea in order to get the correct image?
Thanks a lot and best regards,

Hi Scott,
Thanks for the response but I got to know that LMS and NCS are combined in single ISO image from PI 1.2 and can be installed on the same physical NCS appliance.
Can you pls check this.
Regards

Cisco Prime Infrastructure 1.2 - web browser freezes when managing rogue APs alarms

Hello all,
has anybody faced a freezing problem when you click in Cisco Prime Infrastructure 1.2 down on alarm bar and then to Rogue AP alarms and then try to add an annotitation or change a rogue alarm to Friendly?
I tried it on different PC, different browsers (Firefox 14.0.1. Chrome ...) and the problem is still there.
Has anybody an idea?
Thanks.
Regards
Karel

I just tried it from my lab VM and had no problems. I use Chrome and the browser does sometimes not refresh for a while but that is just when I start to click around.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

"Busiest Clients" report template on Cisco Prime & Aironet 1242AG

Yesterday I was trying to schedule a "Busiest Clients" report on our Cisco Prime physical appliance (PRIME-NCS-APL-K9, v2.1.0.0.87).
My goal was to monitor the busiest clients on a couple of old Aironet access-points. These APs have been installed in a branch office of our university that rely on 4 Mb/s SHDSL WAN connectivity and, as you might imagine, some saturation occurs when the classrooms are crowded.
Unfortunately, all the reports were empty ... there was only a "No data matches the specified criteria for the report” warning inside.
The Client Statistics task (Administration>Background Tasks) was enabled and I was able to run this report selecting a different floor area ... after a few tries I've discovered that this error occurs only when the old Aironet 1242AG APs are involved. If I select a floor area populated with the newer 1142 and 2602 models, the report template works as intended.
So, is there a way to fill a "Busiest Clients" report with data fetched from our old Aironet 1242AG APs?
Our WLC is a Cisco Wireless Services Module 2 Controller for Cisco Catalyst 6500 (WS-SVC-WISM2-K9).
(Sorry ... my English is a bit rusty)

Hi,
Kindly try to restart the Dameon manager with the command line of the server
1> net stop crmdmgtd
and then start the daemon manager --> net start crmdmgtd (wait for atleast 20-25 minutes before login back to LMS and also see if any file do exist at location CSCOps\Objects\dmgtd\ready folder).
Get the output of pdshow after waiting for 20 minutes and stdout.log and stderr.log from CSCOpx\MDC\tomcat\logs.
Many Thanks,
Gaganjeet

Cisco Prime -report

I have installed Cisco prime infrastructure 2.2 and configured it.
Now i want Per switch Per vlan traffic and per switch per vlan session
for that what i have to do please suggest me as soon as possible
Switches is 2960 and 3750X.
Please suggest me and i want that report also..

Your layer 2 switches won't give you much of anything as far as traffic per VLAN as they do not have any interface to report against. The router (or layer 3 switch) which is the gateway for your VLANs can be queried to show the traffic for the Layer 3 Switch Virtual Interface (SVI). That shows up like any other interface in the performance reports.
I'm not sure what you mean by "per vlan session". Can you explain (preferably with an example of how you would do that from command line)?

Cisco Prime Infrastructure 1.3 - reports

Hi all,
I am curious if anybody can help me with Cisco Prime reports. What I want to do is to create report of all my devices which will have information such as hostname, IP adress, . . . , an serial number. I found this task almost inpossible... When I look at the device work center tab and click on one of my devices I can see alll of the information I want (so good so far all infromation are available..but..)When I want to create such a report from all of devices in report section I pick up Detail Device Inventory and customize report which I want. Problem appears after report is done. The main ifnormation such as hostname, location an IP adress are in the first part of report and in the second part there are chassis information with serial number and other fields. But these two parts of report dont have any common field so it is impossible for me to match serial number to hostname..So if I dont want to click on every device in device work center and write down all of information I dont know how to do such a simple task...
I hope someone is able to follow my thoughts
Thanks for any answer
Martin

Robert-
If you create a separate service rule, you can have it fork TACACS authentication requests from that specific IP to a different Service identity and authorization process, where you can tell it to select a specific shell profile. Then all you have to do is create a separate shell profile for managing Prime and have that one selected. We do this with our UCS dvices, regular router/switch CLI logins, etc.
So for example:
UCS: TACACS request --> if match service selection rule "from UCS devices", go to UCS admin access policy --> if match ucs admin identiy reqirements, give UCS admin shell profile
PI: TACACS request --> if match service selection rule "from PI devices", go to PI admin access policy --> if match PI admin identiy reqirements (which are same as UCS), give PI admin shell profile
Default: TACACS request --> if match tacacs protocol from our IP range, go to default device admin policy --> if match defaul identy requirements, give default admin shell profile

CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

Hi,
I have a report from cisco prime infrastructure, that I don´t know how to interpret, because the fields in the report I don´t know what´s mean them, the difference between them, what are optimal values, the worse values, etc.
Can someone help me with this
The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
The fields that I don´t know what are:

hello,
I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

Similar Messages

Maybe you are looking for