Upgrade CUEAC version 9 to Attendant Console Advanced 10

Hi
I am running CUEAC 9.1 with CUCM version 9.1. My customer wants to upgrade the attendant console to version 10 advanced, but keep CUCM at version 9. I see this is supported from the attendant console documentation I have read. I believe version 10 is a serverless offering. Is there the option to go version 10 on my current windows 2008 server(this is where version 9 is running) or does it have to be serverless. Is it possible to introduce high availability if I upgrade to version 10 advanced? I am finding it hard to find definitive documentation for this.
Thanks,
Derek

[+5] to Jaime.
High Availability is supported in Advanced version .You can refer datasheet
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-attendant-console/data_sheet_C78-731867.html
further, as mentioned by Jaime, you can refer release notes of Advanced and Standard version for Compatibility with Call manager & OS requirements .Advanced version is supported on VMWare.
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuaca/10_5_1/release_notes/CUACA1051RN.pdf
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_5_1/release_notes/CUACS10511543RN.pdf
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Attendant_Consoles
regds,
aman

Similar Messages

Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced

Hi Friends,
I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
Anyone have idea to solve this issue please kindly help me.
Thanks

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Unified Attendant Console - UCSS Pricing

If I have 6 active licenses for any of the versions of Attendant Console, then do I need to order 6 instances of UCSS?

Hehe Chris, you're right. I've always thought that this is only the language for the installation details, but I've just tried it on my PC.
Thanks a lot.
regards
Marc

CUAC 10 Advanced / Unified Attendant Console silent install

Is it possible to push / silent install the Cisco Unified Attendant Console 10.x Advanced client ?

Currently, it is not possible to push/silently install the Advanced client. We are in the process of completing a deployment tool that will make this possible for Standard but would need to explore the option for Advanced.

Cisco Enterprise Attendant Console 8.0 - Second Console Queue

Hello Guys,
We have 1 reception console in the head office and we want to setup 2nd reception console in different location (London).
we have 2 operators license on CUEAC, I setup second operator with a seperat queue. We want to redirect the calls to London auto attendant (unity) when the second console is not "logged in" or busy. Right now they both are going to head office auto attendant in the Unity.
Is it possible to keep them seperate so each queue can point to its prompts in the Unity?
Thanks
Sunny

i dont have this option, I am running System Version: 8.0.0.5. Does that mean I have to upgrade? I was looking into upgrading to version 9 but I am not sure if the upgrade is free and if there will be any issue upgrading.

Attendant Console for CUCM 8 and above, My Solution.

I work for a community college in which we employ a full time operator and have several people to fill in for breaks and vacations. Having an attendant console is very important. To complicate matters, we need to have more that the corperate directory in the console for numbers such as departments (Admissions, Financial Aid, etc.) as well as fax numbers and other references.
The attendant console that Cisco provided up untill version 8 met our needs. We upgraded and purchased CUEAC. And for 3 grand, we got a pile of crap with only one seat. The big problem is that it does not support directory integration, does not support incremental search, and has one of the worst implementation designs I have yet to see.
We have tried many consoles, all lacking in one area or another. The one that best met our needs was the most expensive, and had the smallest feature set. We could not justify spending money on somthing that is not at least as good as the free product that cisco once offered.
My crazy solution: Use CUCMAC (Assistant Console). For reference, we have UCCX with Basic Seats (No Desktop Agent).
Cons: Does not support imcremental search or directory integration.
Pros: Free, Unlimited seats, one search entry searches all fields.
Implementation:
Created a dummy "Manager" which allowed me to be able to create "Assistants" (operators).
At this point each person that is to act as an operator can now log into this software with their network username and password (we are LDAP Integrated). They can see and control the lines on their phones, and the software is almost identicle to the Attendant Console Software they were use to.
Created and ACD queue for the operator and added an ACD DN to each phone. The users go Ready and Not Ready using the IPPA.
In our situation, we have the full corperate directory, which for most companies is fine. In our case we need additional numbers for the Departments and such. Becuase we are LDAP integrated, we will need to sync to an additional Directory source for the missing numbers. I wish we could use " Contacts" in AD, but becuase they dont have user ID's, cisco will not import them.
To summarize operation, the operator logs into the ACD queue and used Assitant Desktop as a user interface for the phone. The only thing that differs from Attendant Console, is that you have to use the phone to log in and out, not the desktop software.
Please let me know what you thing, and any ideas how to improve this setup would be greatly appreciated!

Bradley,
I cannot comment on the implementation you have gone through but I can comment on your comments about CUEAC.
There is going to be a new release in June this year which will support directory integration directly to AD as well as the CUCM sync which is available today.
The GUI iteself is to undergo a redesign in version 10, the date on this release is not yet known.
Incremental search is something which is not on the roadmap but is something I will discuss with the Product Manager to see if it can be considered.

CUAC 9.1 Premium Edition Upgrade to version 10.5

I have some questions regarding an upgrade that I'll be doing for a customer. The customer will be upgrading their full UC Suite from 9.1.2 to 10.5. The customer has CUCM, CUPS, Unity Connection and CUAC Premium.
I'm planning on upgrading CUAC first but I have some questions:
1. Is CUAC 10.5 a supported installation on Windows Server 2008 32-bit?
2. Is CUAC 10.5 installed on Windows Server 2008 32-bit compatible/supported with CUCM 8.6?
3. Is CUAC 10.5 installed on Windows Server 2008 32-bit compatible/supported with CUCM 10.5?
4. Which Operating Systems is the CUAC Premium Client supported on?
I've looked through the CUAC Installation & Uprade Guides, but they're seems a bit unclear.
While ordering the UC 10.5 upgrades for the customer with PUT, CUAC was not an orderable product in PUT (CUCM & CUC were) - does this imply that the customer isn't entitled to the CUAC Upgrade, or is the process for ordering CUAC upgrades different? Is CUAC typically covered by the same UCSS/ESW as the other items in the UC 10.5 product suite?
Any guidance is greatly appreciated.

Hi ,
If u refer the datasheet of Advanced Atendant Console version 10.5.2, it says it is compatibile from CUCM version 7.1(5) to CUCM 10.5(2).
From Table 2 , you can get the system requirements but is supported
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-attendant-console/data_sheet_C78-731867.html
● Windows Server 2008 R1 (32-bit)
● Windows Server 2008 R2 (64-bit)
● Windows Server 2012 (64-bit)
● Windows Server 2012 R2 (64-bit)
From Table 3, u can get client system requirements
Microsoft Windows 8.1
● Microsoft Windows 8, Windows 8 Pro, or Windows 8 Enterprise
● Microsoft Windows 7
● Microsoft Windows Vista Professional with SP2
regds,
aman

Problem with Cisco Attendant console

Hi
We Have Cisco attendant console 8.x at site .
As per user they are
" able to log into the “Attendant Console” and access the outgoing numbers located at the bottom of the screen. As far as the internal directory, it does not allow them to access due to the database connection issue. They are getting error “database not connected” on Attendant Console.
Can you please suggest solution to resolve this . Thanks
RJ

Have a look at this link on page 33 and 34:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CiscoTSGv8_6_x.pdf
Directory Issues
Directory will not display and C
onsole shows "Database not connected"
message
On the Attendant Console PC:
Verify that the Windows User has Full Control access to the following registry key and it’s child
objects: HKEY_LOCAL_MACHINE\Softwar
e\Arc Solutions (See, the section
“Client preferences
do not save / are not retained” section on page
4-4
which shows how the permissions can be found
and changed). (If version is older than 8.0.3 verify HKEY_LOCAL_MACHINE\Software\Borland
as w
ell)
Verify that the CUEAC Server can be pinged from the command line by IP Address and Hostname
If it cannot be reached via hostname, have this ad
ded to DNS or to the host file on the machine.
On the CUEAC Server:
Ensure that the contact database is populated:
Open a synchronization log file in C:\Program
Files\Cisco\Logging\LDAP\Log\SSLog_xxxx.txt
Check that contacts have been inserted or updated:

Download of Attendant console 8.0.3.9?

Looking for a download Attendant console 8.0.3.9 which seems to be the last version that supports CM 7.1.3 that I can install temporarily when we do a jump upgrade from 7.1.3 to 9.1.2 and install the newly purchased Attendant Console.
The timeframe for using the older version would be a week or two at most which will be fine for the temp license.
Did not find it on the Download areas.
Thanks

Not sure if you can get old versions, but did you check under Cisco.com/go/ac
Chris
Sent from Cisco Technical Support iPhone App

Lync Attendant Console crashes on startup.

Has anyone experienced the following? Windows 7 machine running Lync 2010 Attendant Console. After recent updates it crashes with the following message. Uninstalling and reinstalling has not helped.
Description:
Stopped working
Problem signature:
Problem Event Name:                        CLR20r3
Problem Signature 01:                       attendantconsole.exe
Problem Signature 02:                       4.0.7577.0
Problem Signature 03:                       4cc139bd
Problem Signature 04:                       PresentationFramework
Problem Signature 05:                       3.0.0.0
Problem Signature 06:                       5167b4d1
Problem Signature 07:                       6263
Problem Signature 08:                       e1
Problem Signature 09:                       System.Windows.Markup.XamlParse
OS Version:
6.1.7601.2.1.0.256.48
Locale ID:
1033
thanks.

Try to explore Control Panel\All Control Panel Items\System, click advanced system settings, select Advanced, click Settings under Performance, choose Data Execution Prevention, click “Turn on DEP for all programs and services except those I select”, add
Lync Attendant Executable file.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SPA500S Attendant Console BLF and Broadsoft NOT working on firmware 7.4.6

Like many of us, for many years now, have continous problems with the Cisco SPA500S Attendant Console. In my case, I'm running my phones with 7.4.6 because it is the version of the Cisco SPA504/508G phone firmware that is certified to work on our current version of Broadsoft's Hosted PBX.
The phones work very well indeed, but the attendant console lights up after a re-boot of the BLF phone is performed, however, the actual SPA500S unit doesn't perform onitoring at all.
I've read every blog/discussino on this matter and it is becoming a nuisance at this point. I dont understand why it takes so much trouble to configure something so easy and what a stark difference there seems to be when you upgrade SPA50XG phones on the firmware from one firmware release to the next one.
I'm looking for anyone that has had this issue that can help me configure the Cisco SPA508G phone that servers as the monitoring phone with a single SPA500S Attendant Console unit to monitor 4 extensions.
Jose A.

We just installed an new system with the SPA508g phones and the SPA 500s Side Car and are having the same monitoring issues. We have notified our support and they have been tweeking our system quite a bit. If this is a known issue why is CISCO not resolving it. Does CISCO monitor these forums?

Cisco Unified Communications Manager Attendant Console issue with cucm ver 9.1.1

Dear support,
As we used before Cisco Unified Communications Manager Attendant Console with CUCM version 7.x as now we upgrade to version 9.1.1 and we could not be able to use this service .due to attendant console is not available with cucm versio 9.1.1.
before upgrade cucm ver 7.x from PC user maintain all contact details store with Attendant console software on his desktop PC. right now its give error unable to connect to the server. due to attendant console is not available with cucm version 9.1.1.
So how i can retrieve the user store contact details from attendant console software from his PC desktop .
so please provide you feedback highly appreciate.
Regards
syed

Dear support,
As i check this on user pc c:\program files\cisco\Unified Communications Manager Attendant Console\data\GlobalSettings.xml
I couldn't be able to retrieve the store contact data .most of the user are get effected by this service.
As we do upgrade to cucm versioun 9.1.1 to use of more services but not user are to be get effect by the attendant services like we can't use Attendant console software on CUCM 9.1.1 after upgrade......
so please advice ........... atleast we need to retrieve the user store contact data ...
Highly appreciate for your resposne .....
regards
syed

Unified Attendant Console - License and Remote Site

I need an Attendant Console solution for a 6 site IPT design. I have CUCMBE at the corporate site with 5 remote locations. I want to have an Attendant Console in each location. I was going to use the Business Attendant version, but see it only support 3 Queues, thoguht I had read it was 6 queues, so I guess I need to go with the Enterprise version.
1. To support 6 active clients, I need to order 6 licenses at $2950.00? Seems awful expensive compared to the old Attendant Console...
2. Queues would need to be created for each site, Business only has 3, but Enterprise has 50?

Hehe Chris, you're right. I've always thought that this is only the language for the installation details, but I've just tried it on my PC.
Thanks a lot.
regards
Marc

Attendant Console 6.1.2 (yeah, I know it is unsupported)

So knowing full well that this is an unsupported software, I am reaching out anyway. I find myself in a pickle at my new company. We are still running Call Manager 6.1.5.11900-13 (don't ask) and we have many users using Attendant Console.
Last week, the line status of all the consoles changed to blue question marks. The phone control function of the application works great, just no line status.
We have restarted AC and CTI services on entire cluster, pointed the AC clients to multiple servers for testing, and uninstalled and reinstalled the AC client. Tonight we are punting and rebooting the Publisher.
Anyone out there unfortunate enough to be running this, and maybe have a suggestion to fix?
A suggestion to upgrade would be sound, but won't be happening for now.
Commence the laughing!

They usually do not simply "die" like this. Id check for any replication issues with your cluster first off.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00809643e8.shtml
Next, I would simply build an entire new AC in CUCM and try to use this one. I have had luck in the past with this where the only way I could get it to work was to delete everything off it that AC used. Pilot points, RPs, etc. Then rebuild it.Sounds odd, yes.
I find it odd though it stopped working with no changes in the network, CUCM configurations, etc.

Cannot install or deinstall upgrade to version 5

I am running Firefox 4.01 on my desktop with Windows 7 Ultimate.
Almost everyday Firefox comes up with a "This is embarrassing..." message. more or less independently of what sites I have visited. Don't you think it is time you did something about this problem?
On a second desktop, running XP SP3, I resisted for a long time the pestering to upgrade, but finally, having lost the important menu bar" File---History--- Menu---Help " , I downloaded Version 5.
When I ran the installation program, however, the program froze while checking the compatibility of add-ons.
So I de-installed Version 5 via the control panel, and under "Add and Remove Programs" Firefox is not now listed there.
However, it is still listed under Startup Programs, the properties showing it is in C:\Program Files\Mozilla Firefox\Firefox.exe, though not showing which version.
Under Program Files I find listed Version 5. 0.1. 4205. Clicking on this program either under Startup files or Program files has no effect.
Yesterday I tried to submit feedback under" Firefox makes me sad".
I was asked to include the URL of the site with the problem. I find it amazing that Mozilla does not know its own URL!
When I clicked "Submit Feedback" nothing happened.
The same happened again today, so I am now trying the "volunteer" service, as it seems direct technical support from Mozilla is non-existent.
To add insult to injury my log in password was not recognized and a further delay has resulted from having to reset it.
I have now installed Chrome on my XP desktop.
I also have a netbook running version 4 of Firefox, also persistently pushing for me to upgrade to version 5.
But until my Mozilla problem on the desktop machine is fixed I do not plan to take any action with the netbook.
I also find it irritating that I cannot simply send an email, but have to fill in a form which does not appear in my Outlook sent mail, but has to be cut and pasted so that I can keep a copy of my message.
RPB

Wow, lots of questions there, let's go one by one.
random_ wrote:
For example, BB App world: The desktop manager says it is installed, but it's not accessible because there is no icon anywhere.
Look at Options > Advanced > Applications > AppWorld, confirm it is installed. Is it AppWorld version 1.1.0.35? Then, read this: KB22944 Home screen icon disappears after an update to to BlackBerry App World 1.1.0.35
My carrier say they can't help me any further as it's a device issue.
Your carrier is being silly. They can help you and if they cannot, they should offer (or you should ask) to have the issue escalated to RIM technical support.
I don't understand what settings are supposed to be changed after I do a factory reset and restore from backup.
A "factory reset" and "restore from backup" are two different things. What do you need help with here?
Is it possible version 5 doesn't work with Orange at all?
Yes, it does.
What is the relationship between these things:
* http://www.blackberryfaq.com/index.php/How_do_I_downgrade_the_OS_on_my_BlackBerry%3F
* the desktop manager software for PC
* the platform as reported on the device
* the app version as reported on the device
Could you please ask specific questions about the above four things?
The first tells you how to downgrade your device OS and I don't see where your headed with the remaining three
Good luck, post back and we'll try to clear things up.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Upgrade CUEAC version 9 to Attendant Console Advanced 10

Similar Messages

Maybe you are looking for