CiscoWorks: Not receiving syslogs, since we change CiscoWorks server IP Address

Hi,
We  are using CiscoWorks 3.2.1. We have changed CiscoWorks server IP  Address, since then we are not receiving syslogs from Devices. Although  devices configurations have also been changed so that they log to new IP  Address e.g. logging new IP Address. But we are not getting syslogs now.
Rest  all operations of CiscoWorks are working ok. E.g. We can access it from  IE, inventory/config collection working, we can deploy configs etc. But  we are not getting syslogs.
Also :
Test Collector Subscription Status
SSL certificate status   SSL certificates are valid and properly imported
Collector status       Collector Server_IP_Address is up and reachable.
but I am not seeing any new alerts receiving here.
When I do start the SyslogCollector.log/SyslogAnalyzer.log from server, I get below message;
E:\Ciscoworks\log>net start crmlog
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
E:\Ciscoworks\log>pdexec SyslogCollector.log
ERROR: cmd failed. Server reason: Application SyslogCollector.log is not registe
red.  All requests to operate on this application will be ignored.
E:\Ciscoworks\log>pdexec SyslogAnalyzer.log
ERROR: cmd failed. Server reason: Application SyslogAnalyzer.log is not register
ed.  All requests to operate on this application will be ignored.
E:\Ciscoworks\log>
Please advise what need to be changed on CiscoWorks in reference to new IP Address.Its required urgently.
Thanks

We have already remove the logging on old IP from devices, and now about 4000 devices are logging to new IP.
Above mentioned problem is on CiscoWorks only, as its not collecting the syslogs. Below error message might suggest some solution.
E:\Ciscoworks\log>net start crmlog
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
E:\Ciscoworks\log>pdexec SyslogCollector.log
ERROR: cmd failed. Server reason: Application SyslogCollector.log is not registered.  All requests to operate on this application will be ignored.
E:\Ciscoworks\log>pdexec SyslogAnalyzer.log
ERROR: cmd failed. Server reason: Application SyslogAnalyzer.log is not registered.  All requests to operate on this application will be ignored.
E:\Ciscoworks\log>

Similar Messages

  • I do not receive verification email for changing my iCloud email address

    i would like to change my iCloud email address e.g.   change from: [email protected], to: [email protected]
    I do not receive verification email for changing my iCloud email address, even though it says verification email sent.
    I also tried the "forgot apple ID" option to change it that way, i received an email but it was for resetting my password.
    is there anyway i can change it?

    Hello, skengzz. 
    Thank you for visiting Apple Support Communities.
    I see you are experiencing an issue receiving the verification email.  Here are a couple articles that will help you with this.  Make sure to also check your junk folder on your mail account for this email.
    If you didn't receive your Apple ID verification or reset email
    http://support.apple.com/kb/TS5404
    Apple ID: Contacting Apple for help with your Apple ID
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • My Sprint cellphone has not received emails since yesterday and I entered the correct settings incoming and outgoing from my Thunderbird email account, advise?

    I have not received emails on my Sprint Galaxy S3 since yesterday morning. I can send but not receive. I have matched my settings to the phone from my Thunderbird account. I thought I had everything synced. Sprint told me there may have been a change in server settings from Thunderbird but I never received any notification from Thunderbird. I am at a loss and not very good at this so any help will be appreciated.
    If anyone can answer and I don't respond quickly, I will answer as soon as possible. Thank you.

    Thunderbird is not an email provider. It has no servers to have settings to be changed. It is email client software just like the one you have on your phone. You would need to get the correct server settings from your email provider and set your phone to use them correctly.
    Too bad that the "helpless desk" at Sprint is not smart enough to know that.
    Thunderbird software does not run on any mobile phones so troubleshooting your phone is outside the scope of this forum.
    One thought, is your email account set up as IMAP or POP?
    You really need an IMAP account if you are going to use multiple devices to check your email. If you use POP and have your computer set to remove the emails off the server then there are no messages left on the server of your email provider for the phone to download. IMAP email is server based and the messages are left on the server and remotely viewed by the remote devices.

  • "Sent Messages" folder not receiving new sent mails after a server change

    My provider just moved my account to another server. The IMAP accounts needed to be re-established on my wife's PC in her program. So we know the files are all there on the new server.
    Funny thing is that it's not working on Mail on my iBook. And when these changes took place, my sidebar contents in Mail changed on me. I have sent some mail to various places since this happened, but none of these new mails have copies which are saved in my "Sent Items" or "Sent Messages" folders. So I have no record now of anything new since the change happened. I DO have copies of mail in there that are pre-change.
    I checked my preferences for mailbox behaviors, and the "Store Sent Items on the Server" is checked, so I'm not sure what's up.
    For the record I'm running OS X 10.4.7 and Mail 2.1.
    I have deleted and re-established my two email accounts in Mail in order to make them re-establish new links with the server, so I'm seeing my folders, but no new mail sent is showing up in my Sent Messages folder.
    I would appreciate if anyone knows if there could be an issue with Mail, my new host's servers, or what. It looks like a Mail issue to me, since my wife's PC is reading everything fine (and she is running Thunderbird as her client).
    Thanks!
    iBook G4   Mac OS X (10.4.7)  
    iBook G4   Mac OS X (10.4.6)  
    iBook G4   Mac OS X (10.4.7)  

    You're welcome.
    I don't think it's your fault. Different IMAP servers use different naming conventions, and the Mailbox > Use This Mailbox For command is meant to let you tell Mail which folder should be used for what purpose, but you shouldn't have to use it just to prevent your mail from being lost. At the very least, Mail should be able to use its own default Sent Messages folder without you having to do anything. I don't know why Mail fails to do this properly so often.
    Worse yet, not only does Mail sometimes fail to use the Sent Messages folder that's already there, but it doesn't even warn you that it's failing to save your sent messages as you've told it to.

  • Account locked. I am not receiving an email to change my password.  I have tried 4 times.

    My Mother, over the weekend, managed to get her account locked after misstyping her email multiple times. This is not the first time this has happened, so she went through the process of trying to change her password, via getting an email sent to her from Apple. If you read the title of the thread, you'd see my problem. Here we are, 4 days later, and we've yet to receive an email from Apple allowing us to change her password.
    I've applied for Apple to send us the email so we can reset her password multiple times, not counting how many times she tried over the weekend as she was out. I'd like to know why we're not receiving this email, because we've had to go through this process before, and it's gone without a hitch.

    Welcome to the Apple Community.
    Sorry just finishing my jam sandwich.
    I have asked for your email address to be edited out. Post your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether.

  • HT5312 I have not received an email to either of my email addresses reset my secuity questions.  What do I do now or should I call a store?

    I have not received a rescue email at either of my email addresses.  Is there a contact number to receive help with this issue?

    If it hasn't arrived after a few hours and isn't in a spam filter, click here, find your country's number, and ask for the Account Security team.
    (86505)

  • How to change VM Server IP address when VMs are provisioned

    Dear all,
    I have deployed some Oracle VM servers and provisioned some VMs running upon on them.
    However, the user requests to change the management IP address of these VM servers. How can I do it?
    In my practice, I need backup all VMs and remove them. Then remove these VM servers from pool. Then change management IP...add them into server pool...restore VMs from backup....
    Pls correct me if I am wrong.
    Thanks,
    Mike

    You don't have to remove or backup/restore the VMs. Just migrate them to another server (if shared storage) or to Unassigned VMs (if local storage). The machines should be stopped (not suspended). There is a bug where a suspended machine can migrate to Unassigned VMs but can't migrate back (without manual intervention on the console). If you are changing the pool virtual IP, you have to delete/recreate the server pool. This will lose the "simple names" of the disks and ISOs, so record them before deleting the pool. It will not remove the Repository contents. After recreating the pool, you can rediscover the server, present the repository and refresh its contents.

  • Changing UCM Server IP Address

    I built an Oracle  Linux 6.6 VirtualBox VM with Oracle DB, WLS and WCC 1.1.1.8 on our office network giving the VM box the static IP of 192.168.2.60 on a bridged network with the host which is my laptop. I want to use it for demos but when the host IP changes or I'm not connected to a network at all, WLS works fine but I can't connect to the UCM on 16200. I've tried shifting to a host only network which gives a subnet of 192.168.56.xxx but I still can't connect to UCM despite changing client HOSTS entries and the Linux eth0 adapter address. It seems something in the server config holds its IP. What do I have to change in the UCM or WLS config to change the UCM IP address please?

    It may be that Content Server can't connect to itself when the IP address changes.
    The only place the IP address would be hardwired in the system would be in config.cfg in the entry "SocketHostAddressSecurityFilter".  I'd change it here, rather than in EM, and restart the UCM managed server.  

  • Recently we changed the server ip address to Netscape Directory server 4.12.  How do I change the IP address in Netscape configuration?

     

    Hi Marcel,
    There is a technote available describing what to do if the domain has changed on a DS 4.1x:
    http://knowledgebase.iplanet.com/ikb/kb/articles/4770.html
    If there is a change in the IP address only, then there is a perl script coming with DS 4.16 (and SP1) and iDS 5.x called admin_ip.pl and located under <server_root>/shared/bin.
    This script works for all the DS 4.1x and 5.x servers.
    Hope this would help you.
    Cheers / Damien.

  • Mail not receiving emails since upgrading to Maverick

    I have been having nothing but issues using the Mail program since upgrading to Maverick earlier this year.  I can't get my incoming emails to sync normally (I have multiple different accounts set up from different servers), sometimes they come in with no issues and other times they don't show up for hours or after I manually restart the program/computer.  I know there is a huge delay because they come in on my phone and iPad without any issues.  This is a huge problem for me since I use Mail for all my work emails and I can't log into all the different web applications easily.  Can anyone give me any suggestions??  I've tried taking the accounts offline and then resyncing them and sometimes it works but lately it isn't doing the trick either.    Here is my mail version I'm using :  Version 7.3 (1878.6)  and I'm in OSX 10.9.5  I haven't upgraded Yosemite because my last upgrade to Maverick was such a headache...  Please help!!!

    Hey there lasmith4,
    I see that you are experiencing some issues with troubleshooting Mail on your Mac. Here is an article that should be able to take you through some more relevant troubleshooting steps for this issue:
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    http://support.apple.com/en-us/TS3276
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Not received email since 18th July

    My girlfriend joined mobileme (on my recommendation) only 2 weeks ago and her email has been down since 18th July that's 6 days... she thinks Apples service is rubbish and i have to agree!
    What is going on?

    This is not a problem with Leopard, or the Apple Mail program.
    Try here: http://discussions.apple.com/category.jspa?categoryID=116

  • IPad has stopped receiving email from mail app I use yahoo can log in thru safari but app has not received email since 3/10/15

    ipad has stopped receiving email on mail app

    Try this...
    Double-click the Home button
    Swipe left or right and find the Yahoo Mail app
    Swipe up on the preview of the Yahoo Mail app to force quit it
    Hold down on both the Home AND Sleep/Wake buttons until you see the Apple logo on black screen (about 10 seconds).
    When you see the Apple logo on the black screen, let go of both buttons.
    After it restarts, launch Yahoo Mail and see if it works.
    Hope this helps!
    ~Joe

  • Email address is defunct/not working, how do I change to new email address & sign in?

    My email address I signed up with Creative Cloud on is no longer working.  I need to change to a different email address of mine and can't figure out how to do it.  In addition, my password with the wrong email address says it doesn't match.  So I'm kinda locked out of everything and need to use my creative cloud today, which has disappeared from my computer for some reason.  I'm just falling apart here!  LOL.  Please help! 

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -email address https://forums.adobe.com/thread/1446019
    -http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

  • Mail for Access Request to O365 SharePoint site not received if a mail-enabled Distribution Lists' email address is provided.

    I have the Access Request feature enabled in my O365 SharePoint site. This functionality is working fine for a single Site Owner's Email-ID and he is receiving the mail in his Outlook with an option to Approve/Deny the request. But when I specify the Email-ID
    of a Distribution List (which consists of all the site owners), the mail is not sent to their respective members although the corresponding request is listed under the Pending Requests in the Access Requests list in Site Settings. Why is this happening and
    if this not possible, kindly suggest a workaround.

    can you specify the DL name instead of the email?
    Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

  • When i changed the server ip address ,em can not login

    i installed the oracle10g for linux in the vmware
    after changing the ip address , i found that i can not connect em ,but isqlplus still can access
    i tried to restart the em ,but it said that below
    [oracle@jason ~]$ emctl status dbconsole
    TZ set to Asia/Chungking
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://jason:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is not running.
    Logs are generated in directory /u01/app/oracle/product/10.2.0/db_1/jason_orcl/sysman/log
    [oracle@jason ~]$ emctl start dbconsole
    TZ set to Asia/Chungking
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://jason:1158/em/console/aboutApplication
    - An instance of Oracle Enterprise Manager 10g Database Control is already running.
    i don't know how to fix it , could you please give me some suggestion on it . tks

    It would be a bad idea to use DHCP or changing ip's on the box where Oracle is running. The best way would be , in your case, to recreate the EM repository. Do the following,
    emca -deconfig dbcontrol db -repos drop
    emca -config dbcontrol db -repos createThese commands would be running on the terminal propmt.
    HTH
    Aman.....

Maybe you are looking for