CIT400 handset registration failure

I have unregistered the CIT400 handset from the base by accident. All my attempts to re-register the handset have failed. I used the sequence suggested in the CIT400 manual (chapter 3), but nothing worked. Could anyone suggest what to do?
Solved!
Go to Solution.

My Handset for no good reason lost reception after 2 Years of perfect operation ! Held the page button down for 20 seconds & problem was fixed ! 

Similar Messages

  • Problem w chrome registration failure when starting up mozilla from desktpo icon which prevents all updates from loading

    Have to close chrome registration window 3 to 4 times before I
    successfully get into mozilla home page
    I recently installed the latest version 3.6 3.7 and get the same problem

    Have to close chrome registration window 3 to 4 times before I
    successfully get into mozilla home page
    I recently installed the latest version 3.6 3.7 and get the same problem

  • Shared services configaration' registration failure error'

    i have installed ESSBASE 9.3.1 clenet, server, EAS,
    i am trying to install shared services after the above components installation.
    I am facing registration failed error from a long time.
    i have database ORACLE 8. i have creacted hypeuser in oracle with password. and granted session creation pevillages
    do i need to grant any previllages to that hypuser? how to do that, plz help me?
    this is pending from very long time, Please help me in this regard.
    Thanks,
    bhavani.

    Hi,
    I didn't think Oracle 8 was supported anymore, with 9.3.1 it is Oracle 9.2 and above that are supported, it may work I am just pointing out it is not supported.
    Also the following oracles roles are required: CONNECT, RESOURCE, CREATE, CREATE TRIGGER, CREATE VIEW, DROP TRIGGER, MODIFY TRIGGER, CREATE PROCEDURE, ALTER SESSION.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • MXP's and SIP Registration Failure Using a FQDN

    A majority of our MXP's will not register to our SIP Server using a FQDN. They will register using the SIP Server IP Address. Why do they not like the FQDN? Our C Series, EX, and SX systems do not have this problem.

    yes to both questions. some of the MXP's show that they are registered with the FQDN, but that the Active SIP Server Address is the FQDN. I was expecting to see the IP Address of the VCS it is registered to.The majority just won't register with the FQDN, but do with an IP Address.
    All of our other non-MXP endpoints register just fine using the FQDN.
    The same FQDN is used for Gatekeeper and SIP registration. The MXP's register to the gatekeeper as expected. It is just the SIP Registration.
    The majority are running F9.3.3. Some others are running anywhere from F9.02 to F9.3.1, but all software releases are affected the same way.

  • Applecare online registration failure

    I have been trying to register my Applecare Protection Plan online and cannot complete the process. I am asked to 'select agreement type' from a pulldown menu that contains no options! I have wasted enough time messing with what is supposed to be a quick procedure and would rather not have to spend any time on the phone looking for answers. How important is it to register Applecare? Frustrating bugs in the registration process is just plain lame.

    I wish AppleCare would hire a technical editor and make the Proof of Coverage letter coming with the TechTools Deluxe disk easier to understand. After reading this thread I found the following FAQ, at http://www.apple.com/support/products/faqs.html, which clarifies my same question: how and where and if about registering the AppleCare Protection Plan. Apparently one does not have to register if purchasing the plan with the computer. But it doesn't say so anywhere in the letter. (On the other hand it does not say that one has to register either...)
    --- FAQ -----
    Q: When I purchase the AppleCare Protection Plan, do I need to register it?
    If you purchase the AppleCare Protection Plan at the same time as your Mac, iPhone, iPod, Apple TV, or Apple display from the online Apple Store, Apple will register the AppleCare Protection Plan for you. If you purchase your AppleCare Protection Plan and your covered product separately or elsewhere, you will need to register your AppleCare Protection Plan.
    Your AppleCare Protection Plan coverage starts from your hardware purchase date. Registering your AppleCare Protection Plan at a later date does not extend your coverage. In fact, there are many benefits to registering your AppleCare Protection Plan as soon as you purchase it.
    For example, after you register, Apple will have your hardware, AppleCare Protection Plan, and personal contact information on file. When you contact Apple for service or support, Apple can access your information right away and start addressing your issue, rather than spending time verifying your eligibility.
    How do I register my AppleCare Protection Plan?
    If you purchase the AppleCare Protection Plan at the same time as your Mac, iPhone, iPod, Apple TV, or Apple display from the online Apple Store, Apple will register the AppleCare Protection Plan for you. If you purchase your AppleCare Protection Plan and your covered product separately or elsewhere, you can register your AppleCare Protection Plan at www.apple.com/support/register or contact Apple at the phone number included in your AppleCare Protection Plan package. Easy-to-follow instructions are also included with your AppleCare Protection Plan package.

  • Smart chip registration failure

    Help,  I have a new Nokia 2610 that won't charge plus just saw a message flash quickly on the screen that said "smart chip registration failed" Then the screen went black again as it's been ever since I plugged it in to charge the new battery in the new phone.  Of course it is Sunday with zero support from AT&T and no help from Nokia except you lovely peopple iin this discussion group. Can't even get support fromAT&T until I can get the phone charged and obtain a wireless number so I can login and "chat" with their support people.. Which will never happened if I can't charge this new phone.   What ever happened to product support and decent customer assistance from companies that sell these things?

    Hello,
    My Nokia 2610 is a AT&T locked GOPhone with prepaid system. I just purchased it yesterday. The sim card supposedly is 1 year old or less if the copyright on the box is accurate.  I don't have another phone to try the card in unfortunaately.  I will call AT&T customer service in morning and tell them what I think of their product.... and ask if they will get the phone online or take it back.  I will have to return it no matter if they can get it set up for calling because many of the keys do not work with out repeated trys.

  • IDM 8.0 Domino User Registration Failure with Explicit Policy

    I'm using IDM 8.0 Patch 5 with a Lotus Notes 7.0.2 CCH1 client. I have been successfully creating accounts for almost 2 years and am looking to migrate to IDM 8.x. Previous to my IDM 8.x configuration, I have been using the Lotus Notes 6.5.5 CCH2 client with IDM 6.0 SP2. I have been using an explicit policy since day one with the previous configuration without any issues. The policy was being set using the Policy schema attribute with a field on the user form and worked fine. As of IDM 8.0, the gateway service crashes on every attempt to create a user when the Lotus Notes 6.5.5 client is used. Due to this headache, I tried the Lotus Notes 7.0.2 client and the gateway no longer crashes. However, a new error message is produced. At about the point in registration where the notes ID file is generated (which doesn't succeed), it throws the following error:
    DominoExtension::Error while executing 'WS_REGNewPerson' errCode: '8421' Registration Failed: A policy could not be retrieved from the Domino directory.
    When I stop the gateway service and open the Lotus Notes client using the same credentials the gateway service uses, I can easily find the policy object that we've been using, open it, look at it, etc. With the gateway trace enabled at the highest level (4), it shows no other information between the call to WS_REGNewPerson and the error displayed in the response. I would also like to mention that I noticed the new availability of the explicit policy attribute on the resource configuration page. I attempted to use the resource attribute instead of the form field that I was previously using and it also fails with the same error.
    It should also be noted that I'm running this new environment in parallel with the existing system, that is, IDM 6.0 SP2 with Lotus Notes 6.5.5. That environment has its own gateway servers and web servers. The production Domino environment has not changed and still works fine in the current production IDM environment. The IDM 8.x environment is running against the same Domino servers (same physical servers), but is using separate web servers and gateway servers in a test environment using the same credentials as the production environment.
    Has anyone seen this issue and had success in overcoming it? Any assistance would be greatly appreciated.

    There are a couple of important bugs here:
    Bug 19094: gateway crashes when provisioning Notes user if Notes client version is 6.5 and server is 7.x
    Bug 17213: Add support for Lotus Domino/Notes 8
    The resolution brought on by BUG # 17213 added a section to the release notes that states the Domino Server and Lotus Notes client versions must match.
    Regarding the error you're seeing:
    DominoExtension::Error while executing 'WS_REGNewPerson' errCode: '8421' Registration Failed: A policy could not be retrieved from the Domino directory.
    I believe there was a change from REGNewUser to REGNewPerson, which could be playing a role, but I am not certain. I hope this helps.
    -A

  • Virtual Machine Cloud - Provider registration failure

    Hi,
    I've successfully installed the Admin portal on a dedicated server and installed VMM SP1 2012 with SPF on a separate server.
    I was also able to register the SPF, but unfortunately, when I try to register the System Centre Provider, I get the following generic message:
    "Failed to register VM Cloud provider 'test'" - An error occurred while processing this request".
    Any ideas?
    Thank you,
    Stephane

    I have done SPF and SCVMM Integration in KATAL portal more than 10 times, but i haven't faced this error,
    SPF registration is done, only issue happens with SCVMM Integration, Am i right ?
    or u missed the integration of SPF ? first integrate SPF then SCVMM, it will work , Issue arises because of Permission, make service accounts as local admins
    Have u done post installation config from hyper-v nu links ? like make spf-svc as a admin in SCVMM console
    spf-svc should be member of 3 local admin groups in KATAL Server
    Cross check basic things,
    User Access Control set to never notify in All All Servers ( KATAL,SPF and SCVMM)
    open windows powershell with admin rights and set execution policy to unrestricted in All Servers ( KATAL,SPF and SCVMM)
    Open IE as Administrator and try to Add SCVMM again in KATAL Admin portal.
    f System Center Cloud Provider registration failed for VMM Clouds then we can Unregister
    the failed system Center Cloud Provider.
    For that
    Open SQL Instance of Katal Portal, Expand Microsoft.MgmtSvc.Store. Database, Expand Tables
    Choose mp.ResorcesProviders, Edit Top 200 Rows and delete systemcenter value
    Read mentioned articles, it will help you
    http://www.hyper-v.nu/archives/marcve/2013/01/installing-and-configuring-system-center-service-provider-foundation/
    http://www.hyper-v.nu/archives/marcve/2013/02/installing-and-configuring-windows-azure-for-windows-server-part-1/
    http://www.hyper-v.nu/archives/marcve/2013/03/installing-and-configuring-windows-azure-for-windows-server-part-2/
    http://www.hyper-v.nu/archives/marcve/2013/03/installing-and-configuring-windows-azure-for-windows-server-part-3/
    Kirpal Singh

  • SIP Device Registration Failure

    All,
    running CM 9.1(2) and trying to add an ALtigen IP phone as a 3rd party SIP device.  Getting SIP REG FAIL on the phone.  I followed the link below but still the same results.  Any ideas on where to start troubleshooting this?  
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b09sip3p.pdf
    Thanks in advance.  All replies rated.

    Hi Scott.
    Which parameters did you configure on your sip phone.
    Remember that Displayed name should be the Directory number defined on CUCM phone, Username should be the same directory number and Authorization Username should be the digest user defied no the phone.
    HTH
    Regards
    Carlo
    Sent from Cisco Technical Support iPhone App
    Sent from Cisco Technical Support iPhone App

  • PTR Record Registration Failure

    We have 2008 R2 Dc-DNSs.
    Some times (not always!) when I create an A record manually and the "Create associated pointer (PTR) record" is checked although the reverse lookup zone exists, I get this error:
    "Warning: The associated pointer (PTR) record cannot be created, probably because the referenced reverse lookup zone cannot be found."
    Why?!

    Hello,
    please see for starting:
    A zone name entered without a period between the address and the   in-addr.arpa section of the name, or with a period instead of a hyphen   between 'in' and 'addr':
    Incorrect: 6.10.10in-addr.arpa
    Incorrect: 6.10.10.in.addr.arpa
    Correct: 6.10.10.in-addr.arpa
    The network number is not correctly entered, such as (assuming an IP   address of 10.10.6.x):
    Incorrect: 10.10.6.in-addr.arpa
    Correct: 6.10.10.in-addr.arpa
    A domain name is entered instead of in-addr.arpa.
    Incorrect: 6.10.10.test.domain.com
    Correct: 6.10.10.in-addr.arpa
    An incorrectly subnetted reverse-lookup zone is entered.
    Also see
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/55962799-94f8-4462-9a69-b3a0fcb66a0b/reverse-dns-fails-configuration-issue
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • Registration failure

    I have an NB100 which has recently developed a fault in the touch-pad buttons. When I try to enter my serial number in the support request pages I am told that my machine is not registered although I have an email that clearly indicates otherwise. I copied the serial number from that email so there can be no transcription error. Should I re-register or will this just make things worse?

    Hello
    Have you checked status on TOSHIBA UNIT DETAILS page?
    I recommend you to contact Toshiba and clarify this. --You can write on [email protected]
    You must contact Toshiba in your country. Contact details can be found at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp
    Good luck!
    Message was edited by: ADMIN

  • Quicktime Pro Registration Failure, Any Suggestions?

    Hi,
    I 'bought' the quicktime pro key from the apple store 48 hours ago and still haven't recieved it. I was directed by the phone store customer service to fill out the request for help form online, which I did 24 hours ago, still no response - no key.
    I followed the link that says:
    "I can't find my QuickTime Pro key. Is there a way to get it again?
    Absolutely. Simply click the link below, and we'll take you right to the web page where you can retrieve your key. You will need to sign in, so have your Apple ID and password ready."
    And it just lists the software that I've bought but no key and no clickable links.
    I just called and they said it could be another 2 days before I get my key. Is this normal? Does it strike anyone else as odd that it would take 4 days to email a key for software?
    This should be an entirely electronic process. Choose the item, pay with card, recieve key. It shouldn't take more than a few minutes, should it?
    Anyone have a similar experience or any advice?

    This was just resolved, sort of. I got an email from Apple saying:
    Dear Customer,
    Thank you for your recent order.
    Although your purchase attempt was successful, a QuickTime Key was not generated.
    A credit in the amount of $32.50 is being credited to your account and should appear on your statement within five business days. Please contact your credit card company if you have questions about when the credit will be posted.
    To receive a QuickTime Pro key, please re-order the key by going to
    <http://www.apple.com/quicktime/buy> and click the link for your operating system.
    We sincerely apologize for any inconvenience this has caused you.
    Best Regards,
    Apple Store Customer Support

  • Insert sim/sim registration failure.

    Halo there!
    I'm Geophrey,I have a nokia E63 that keeps giving me the ''insert sim card'' alert.The phone may be in a good working condition,but when I take it out of my pockets to check any missed call/messages or even to make any,the 'insert sim!' alert meets my eyes!
    I had been watching it:so it begins by asking for PIN even six consecutive times,before going to the offline mode.
    Couls somebody help me please??

    did you buy this of somebody ?check the sim is free of dirt and the sim retainer is also clean also check that its not loose
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Ipass Registration Failure

    I could not setup my iPass as I am getting an error stating that shows under the email field. it says "invalid company" I tried hotmail and gmail but the error still occured. Please help me solve the problem.
    Thanks

    Hi there @cpsaw
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand you are having trouble registering your iPass account. I am happy to assist. As it is a third party application, then I would recommend checking out their support which I have included below for your conveniece.
    iPass support page
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Initial iPass registration failure on Stream 8 5901TW

    I could not setup my iPass as I am getting an error stating that the “serial number and token code” do not match. I have keyed in the serial number found in the packing list and at the back of my device. The token code came with the package which is why I am wondering why it is not working.
    Yesterday afternoon I went to HP Customer Service to have this sorted out but they directed me to send an email to iPass support ([email protected]) ask for another token code. Instead I received a generic noreply mail:
    Thank you for emailing [email protected] 
    For help with :
    HP devices or connecting to the Internet: http://www8.hp.com/us/en/troubleshooting.html
    iPass Open Mobile App setup or connectivity:  http://www.ipass.com/hp/faq/
    Thank you
    The iPass Support Team
    Need help on this, thank you

    i am even facing the same problem ipass token and serial no does not match when i try to register myself in the www.ipass.com/hp link.
    i sent a mail regarding this issue to [email protected] and received a noreply
    saying
    Thank you for emailing [email protected]
    For help with :
    HP devices or connecting to the Internet: http://www8.hp.com/us/en/troubleshooting.html
    iPass Open Mobile App setup or connectivity:  http://www.ipass.com/hp/faq/
    Thank you
    The iPass Support Team
    please help me in solving this issue

Maybe you are looking for