Clarification on issue with tablespaces

Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says _"Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"_
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
Thanks

What's the rate of growth? Is 10GB going to last you a day? A week? A month?
Cheers, APC
blog: http://radiofreetooting.blogspot.com

Similar Messages

Need clarification on issue with tablespaces

Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says "Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
Thanks

Well, the guideline says "*and* have less than 2 GB of free space"
Since that tablespace as 10GB of free space, the guideline says that you do not need to concentrate on it. Eh ?
I would be careful with guidelines that are hard-coded in this manner. You need to know the context in which the guideline was set.
Assuming that your database/application doesn't grow suddenly by 1GB or larger (or create temporary segments / objects of 1GB or larger), the "2 GB of free space" might make sense. Then, again, it depends on the extent allocation type. What size are extents getting allocated.
You should check with your organisation's senior DBAs on what happens if you don't concentrate on a tablespace because it is outside the guidelines !

Issue with tablespace PSAPTEMP

Hello,
Database alert logs (Oracle + Netweaver 7) says 'Unable to extend Tablespace PSAPTEMP'.
But DB02 shows taht PSAPTEMP is totally free.
COuld you please throw some light on this paradox.
Thanks.

Our PSAPTEMP is a good 4GB in size.
The alert log reads like this --
Tue Aug 25 08:02:51 2009
Completed checkpoint up to RBA [0xe0b0.2.10], SCN: 1277106986
Tue Aug 25 08:05:08 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 08:06:18 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 08:07:26 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 08:07:27 2009
/* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Completed: /* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Tue Aug 25 08:15:13 2009
Incremental checkpoint up to RBA [0xe0b0.108ed.0], current log tail at RBA [0xe0b0.10fed.0]
Tue Aug 25 08:45:14 2009
Incremental checkpoint up to RBA [0xe0b0.18b95.0], current log tail at RBA [0xe0b0.198df.0]
Tue Aug 25 09:15:22 2009
Incremental checkpoint up to RBA [0xe0b0.24c8b.0], current log tail at RBA [0xe0b0.28223.0]
Tue Aug 25 09:16:03 2009
Tue Aug 25 09:21:05 2009
Completed checkpoint up to RBA [0xe0b1.2.10], SCN: 1277162230
Tue Aug 25 09:45:38 2009
Incremental checkpoint up to RBA [0xe0b1.d6f8.0], current log tail at RBA [0xe0b1.1069b.0]
Tue Aug 25 10:15:46 2009
Incremental checkpoint up to RBA [0xe0b1.25f58.0], current log tail at RBA [0xe0b1.27367.0]
Tue Aug 25 10:20:29 2009
Tue Aug 25 10:25:32 2009
Completed checkpoint up to RBA [0xe0b2.2.10], SCN: 1277185489
Tue Aug 25 10:45:54 2009
Incremental checkpoint up to RBA [0xe0b2.89ce.0], current log tail at RBA [0xe0b2.c956.0]
Tue Aug 25 11:15:55 2009
Incremental checkpoint up to RBA [0xe0b2.221e3.0], current log tail at RBA [0xe0b2.25707.0]
Tue Aug 25 11:26:12 2009
Tue Aug 25 11:31:14 2009
Completed checkpoint up to RBA [0xe0b3.2.10], SCN: 1277208797
Tue Aug 25 11:45:56 2009
Incremental checkpoint up to RBA [0xe0b3.aabc.0], current log tail at RBA [0xe0b3.d507.0]
Tue Aug 25 12:05:42 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 12:07:05 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 12:07:07 2009
/* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Completed: /* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Tue Aug 25 12:15:56 2009
Incremental checkpoint up to RBA [0xe0b3.23fd4.0], current log tail at RBA [0xe0b3.243ef.0]
Tue Aug 25 12:28:00 2009
Tue Aug 25 12:33:07 2009
Completed checkpoint up to RBA [0xe0b4.2.10], SCN: 1277250318
Tue Aug 25 12:46:13 2009
Incremental checkpoint up to RBA [0xe0b4.31fa.0], current log tail at RBA [0xe0b4.884c.0]
Tue Aug 25 13:16:29 2009
Incremental checkpoint up to RBA [0xe0b4.17879.0], current log tail at RBA [0xe0b4.1b768.0]
Tue Aug 25 13:46:29 2009
Incremental checkpoint up to RBA [0xe0b4.2657a.0], current log tail at RBA [0xe0b4.2a3d8.0]
Tue Aug 25 13:50:17 2009
Tue Aug 25 13:55:18 2009
Completed checkpoint up to RBA [0xe0b5.2.10], SCN: 1277273370
Tue Aug 25 14:16:30 2009
Incremental checkpoint up to RBA [0xe0b5.11df5.0], current log tail at RBA [0xe0b5.13fa3.0]
Tue Aug 25 14:46:31 2009
Incremental checkpoint up to RBA [0xe0b5.24569.0], current log tail at RBA [0xe0b5.25e9a.0]
Tue Aug 25 14:54:21 2009
Tue Aug 25 14:59:14 2009
Completed checkpoint up to RBA [0xe0b6.2.10], SCN: 1277297035
Tue Aug 25 15:16:32 2009
Incremental checkpoint up to RBA [0xe0b6.194e5.0], current log tail at RBA [0xe0b6.1a2cc.0]
Tue Aug 25 15:42:08 2009
Tue Aug 25 15:46:32 2009
Incremental checkpoint up to RBA [0xe0b6.294ce.0], current log tail at RBA [0xe0b7.8dfd.0]
Tue Aug 25 15:47:10 2009
Completed checkpoint up to RBA [0xe0b7.2.10], SCN: 1277319066
Edited by: Gautam Poddar on Aug 26, 2009 1:07 PM

Issue with tablespace

We had a tablespace and maxsize of it was specified as 'unlimited'. It has single datafile.
While creating index we are getting error 'unable to xtend tablespace.....'(ORA-01652).
Do we have to specify the maxsize while creating datafile also?
Regards
Rajiv Gupta

Amit,
Maran has good given description for ulimit.Will just add to it.You can check about ulimit ulimit.For root user the access to the resource to the resources are unlimited.For other users,we need to map the resources to limits so we use it.Like for example,tp increase the number of open files we can set some thing like ulimit -n 5000.You basically set all these settings in /etc/system.
Aman....

Issue with SYSAUX tablespace.

Without backup and any old archivelog(more then last five days),IN RAC environment we are trying to recover one of datafile of our SYSAUX tablespace which is in RECOVER state.
sysaux tablespace having two datafile,while making online to second datafile it's asking for last month archivelogs which we dont have And while making online to SYSAUX tablespace it's giving error that one of your database datafile recquire recovery.
ORA-00279: change 195638767 generated at 08/10/2009 14:17:27 needed for thread 1 while recovering by auto
recover datafile 42;
ORA-15173: entry '1_15271_682264878.dbf' does not exist in directory 'csdprod'

Jaroslaw Bicz wrote:
Hi
I'm having some issue with SYSAUX tablespace. it have 36GB Allocated Size but only 2GB used. Is there a way to reuse free space. it is oracle 10.2.0.4 on red hat.
Regards
JarekOracle doesn't recommend to use SYSAUX tablespace to store user data on it

Performance Issues with Debugging even in Display Mode

Hi not certain if this would sit in Security, ABAP or Basis, but lets start here as it is security related.
S_DEVELOP with any activity on DEBUG on a production system is a concern, but what are the performance related issues when a super user has to go into debug in display only on a production system because of a really complex issue?
I've heard in the past of a scenario where system performance was impacted, and we have notes around the allocation of S_DEVELOP display DEBUG access to this point. (I've summarised these below)
The risk with debug is associated with the length of time that the actual debugging process is being performed.
u2022 Work processes are dedicated solely to the users for the duration of the debug. If these are being performed for a long time, these can cause issues with not enough work processes being available.
u2022 It can cause DB2 locks. If the debug session last awhile, DB2 locks are not released. This impacts the availability of tablespaces, thus, affecting various transactions running across the system.
Even with these concerns, security will often get asked for debug display access.
As security is about risk identification, assessment and then controlled access what do other organisations do?
Options (not exhaustive) are "No Debug ever" or "Debug display only via a fire fight or super user on a time limited basis".
We are currently in the "debug display only via fire fight" camp, but would like to canvas opinion on this.
As one of the concepts of security is Availability of data (and to an extent ensuring the systems are up and running) do the performance risks push the security function to the "No Debug Ever" stance.

If you need to debug in production, then 9 times out of 10 you need to do root-cause analysis: The developer is the problem.
Writing sloppy code and not testing properly should not be an excuse for debugging in production.
But of course, there are exceptions even when you do try to keep them to a minimum.
To add to Jurjen's comments, also note that the debugger only has a limited capability of doing a rollback. So you can quite easily and unintentionally create inconsistencies in the system - also in display mode - which is an integrity problem, and typically more critical than availability problems or even potential confidentiality concerns.
Cheers,
Julius
Edited by: Julius Bussche on May 15, 2009 10:50 AM

Issue with Hierarchies

Hi ,
We are working on BO on top of BW pilot version and finding different issues with different tools.
1) Used existing BW queries/created universe.When we run the report using Web Intelligence, not able to get the way Hierachies displays in BEx.(Tree like structure).
If we enable drill up and down option, the summary level disappeas only we can see the lower level.Which I think is a useless information to the user as it appears like a flat file data.
We created the report with possible Hierarchies upfront like a canned report, but doesn't give any option to drill up/down further, doesn't allow the user any other activity, other than dragging/dropping some columns.
2) Tried to create the report in Crystal, but because of the page limitations, I cannot get all my columns in the same page( I have 35 columns)
3) To derive the reports in XCelicius, my business partner tells me that they need to create queries on Excel to use that functionality.They are preferring to go with R/3, rather than BW, which will be again significant amount of work.
I wonder if anyone encountered these kind of issues ?
Providing these limitations, I don't see much value of having this tool on top of BW.Any comments?
I agree, it is a great tool on top of relational databases, as we are using this tool on relational databases and didn't find these many issues.
Can someone provide me the list of advantages of having BO on top of BW? I mean what BO can offer when compared to BEx( We only use BEx, no Web)
Thanks
Priya

hi,
perhaps I can bring in some clarifications :
- Crystal Reports is able to leverage the hierarchies and use a parent child relationship and show the hierarchical levels from BW. It looks like the challenge you have in Crystal Reports is that you have a lot of columns that you would like to have in your report. Crystal Reports is layout driven so you could actually set a size of the report by configuring the page setup.
- web Intelligence is exposing a hierarchy based on levels so that the user can leverage the levels in the report. when enabling the drill down you could actually go from a top level down to multiple levels of the hierarchy
- Xcelsius can leverage multiple different sources: Web Services, Crystal reports, web Intelligence. Xcelsius can use Live Office to connect to existing reports from Crystal Reports and web Intelligence.
Feel free to provide your comments / questions in case this doesn't answer your questions
Ingo Hilgefort

Issue with back end validation in jsf 2.0

I am upgrading my apps to jsf2.0 and I came across something that I hope you have already solved.
In jsf 1.1 action methods returned a string. If that string was NOT mapped as a navigation in faces-config.xml, then it just rerendered the active page. this made doing back end validation easy because I could add messages to the faces context and when the active page rerendered the validation messages would get displayed and no one was the wiser than it was done on the back end instead of on the front end.
In jsf 2.0 I get null pointers if I return a string that is NOT mapped as a navigation. So I changed the code to return a string that is mapped as a navigation for that page when there is a validation error. but that is treating it like a new request and not a rerender so the validation messages I added to the faces context are not there when the page renders.
if i test submit a form that has only front end validation then it works fine and the validation messages are correctly shown.
any suggestions?

In 11.2.0.3 you are unlikely to see the various truncate/drop issues relating to large numbers of small extents - unless you use dictionary managed tablespaces.
There are a couple of possible threats with small extents and highly concurrent inserts with ASSM that might be a temporary problem when the object size is small. There may still be some issues with large uncommitted inserts or deletes making other session's work very hard to identify free blocks until the large transaction has committed - these things can be hard to test.
There may still be a couple of inefficiencies with parallel query and small extents, although parallel CTAS did have a (possibly temporary) hack to allocate immediate large extents to work around some of the silly details.
Really you need to think through your requirements and them model them on your system - some of the anomalies have changed several times over the last three years.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Now on Twitter: @jloracle

Issue with Generate Create Script in new ODT 11.1.0.5.10 beta

So I'm trying to determine if there's an issue with the Generate Create Script option in the new ODT 11.1.0.5.10 beta (when you right click on a table in Server Explorer).
The SQL create script that it generates lacks the slash between lines. For example I generated the create script for my User table and this is what was generated:
CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
BEFORE
INSERT
ON "DEV"."SYSTEM_USER_TB"
FOR EACH ROW
begin
select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
end;
In my new Oracle Database Project, if I right click on the script and select "Run" or "Run On", the script fails saying:
Connected.
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ERROR at line 2:
ORA-00922: missing or invalid option
If I then add, a slash between lines, the script runs successfully and creates the table/trigger and whatever else just fine. For example, I changed the above generated code to look as follows:
CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
BEFORE
INSERT
ON "DEV"."SYSTEM_USER_TB"
FOR EACH ROW
begin
select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
end;
So, does anyone know if this is a bug? Could I be missing an option to add in the slashes to the generated code? Is there an option to not require the slashes? Could there be another way to execute these scripts?
Seriously, I think I'm having deja vu from the last release of the Dev Tools: Generate Create Script creates scripts that won't run: ORA-00922: missing..
...except this time the documentation says I should be able to use the "Run" and "Run On" commands in the Oracle Database Project (see page 8): http://www.oracle.com/technology/tech/dotnet/pdf/ODT11_whatsnew.pdf
null

There are 2 issues in the generated script :
1. Missing semicolons at the end of the create stmts
2. Missing slashes
Both of these fixes will be available in the ODT 11.1 release.

Printing Issues with HP D145 and multiple users from G5

Hi - I've a HP D145 All-In-One connected via USB to a G5 (as described below). The machine has multiple accounts on for different members of my family. The printer is directly connected to the G5 via USB connection but is shared with other Macs. Printing has become increasingly difficult, and we now have the following problems:
1. Printing will only work from the administrators account.
2. Printing periodically (daily, generally after a few hours of use) stops from the administrators account
Solutions tried:
a. Check set up for the non-administrators accounts....Looks OK for printing
b. When printing stops - I've tried repairing the permissions with the Disk Utility. This no longer works.
c. Run Printer Setup Repair (with option to repair all user accounts) - Works for the administrators account providing the computer and printer are restarted, otherwise no effect.
d. Reinstalling the software - No effect
It’s beginning to look like I need to replace this printer with one that works.
You can help me in two ways - how to solve the printer problems, or alternatively suggest a colour All-in-One printer that can work with multiple accounts and does not have the problems mentioned above.
Many thanks in advance,
Regards,
Melvyn

Below I've copied the fix HP proposed and some additional information that they have sent me.
1. The proposed fix that we could not make work:
Hello Melvyn,
Thank you for contacting HP Total Care.
Simply reinstalling the software will not be enough to solve the
problem. Try these steps to resolve the issue at hand:
From the Administrator account:
Double-click on the Macintosh Hard Disk.
Open Applications.
Click and drag Hewlett Packard Folder to the trash.
Close all windows.
Double-click on the Macintosh Hard Disk.
Open the Applications folder.
Open the Utilities folder.
Double-click on Process Viewer/Activity Monitor
If Activity Monitor does not appear:
Choose Monitor in the toolbar across the top.
Check Show Activity Monitor.
Ensure the Activity Monitor shows "All Processes", instead of "My
Processes".
Single-click and quit each of the applications starting with HP, using
the Stop Sign that says "Quit Process" beneath it.
Close Activity Monitor.
Double-click Macintosh Hard Disk.
Open the Library folder.
Open the Preferences folder.
Click and drag either HP AIO Preferences or Hewlett Packard Preferences
to the trash.
Remove the HP Registry file.
Go back to the Library folder.
Open the Printers folder.
Remove the HP folder
Double click Macintosh Hard Disk.
Open the Users folder.
Choose the User logged into.
Open the Library folder.
Open the Preferences folder.
Click and drag either HP AIO Preferences or Hewlett Packard Preferences
to the trash.
Click and drag files beginning with com.hp to the trash.
Click and drag files beginning with HP to the trash.
Double-click the Macintosh Hard Disk.
Open the Applications folder.
Open the Utilities folder.
Double-click Printer Setup Utility.
Delete any HP All-In-One printers listed (click the printer name to
highlight it, then click the Delete button on the printer list)
Repeat process for all HP All-In-One Printers.
Remove HP Director/Image Zone from dock by dragging to the trash.
Restart the Macintosh.
Empty the Trash.
From each user account:
Double click Macintosh Hard Disk.
Open the Users folder.
Choose the User logged into.
Open the Library folder.
Open the Preferences folder.
Click and drag either HP AIO Preferences or Hewlett Packard Preferences
to the trash.
Click and drag files beginning with com.hp to the trash.
Click and drag files beginning with HP to the trash.
Double-click the Macintosh Hard Disk.
Open the Applications folder.
Open the Utilities folder.
Double-click Printer Setup Utility.
Delete any HP All-In-One printers listed (click the printer name to
highlight it, then click the Delete button on the printer list)
Repeat process for all HP All-In-One Printers.
Remove HP Director/Image Zone from dock by dragging to the trash.
Restart the Macintosh.
Empty the Trash.
From the Administrator account:
Download and install the latest software for this product. You can
obtain this software from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us⟨=en&os=219& product=64992&dlc=en&softwareitem=oj-35225-1
From each user account:
Double-click the Macintosh Hard Disk.
Open the Applications folder.
Open the Utilities folder.
Double-click Printer Setup Utility.
Click Add, ensure you are in the Default Browser.
Select the HP All-In-One Printer.
Click Add at the bottom-right corner of the screen.
Set this printer as the default.
You should now be able to print from all accounts.
Sincerely,
2. The reasons why it may not have worked:
We need to be sure that you are fully logging out of one account and
then back into the next. The fast user switching feature of the Mac OS
can create problems with our printer drivers. For this reason, fast user
switching is not supported by HP.
The other issue we may be running into would be the Mac OS itself. Over
the past few months the Mac OS has gone through several updates. When
the 10.4.4 version was released it created some issues with our existing
software. An updated version of our software has been developed which
works well with 10.4.4 and higher, but it is not available for this
printer.
It may be that as each new OS update is installed on your computers that
the issue becomes worse. If you are running the Mac OS 10.4.3 or lower
then the version 7.3.1 of our software should work fine. If it is 10.4.4
or higher there will be some issues as the new OS versions do not seem
to like the older drivers.
I would have to recommend retrying the full uninstall the Derek had
outlined. This time however, just install the downloaded 7.3.1 software
from our web site for the D145. Once it has been installed we need to
test it fully without adding the scanjet software. I am hoping that
without both version of our software installed it may work better.
This should resolve the issue. If you need further assistance, please
reply to this message and we will be happy to assist you further.
3. The repsonse to questions on switching and OS X 10.4.4
You are correct, since you are running the 10.4.4 I cannot guarantee
that the older software version will allow full functionality. It should
allow for printing and as long as you avoid the fast user switching,
when trying to print, it should keep working well.
I understand the convenience of fast user switching but you will have to
log completely out of one user, and then log properly into the next
before you can expect the printer to function.
I would still recommend trying the steps I had outlined as it really is
the only thing you can do that may work.
G5, 2 GHz dual processor, 2Gb RAM, 500GB Hard disk Mac OS X (10.4.3) Clarification of the issues from HP

Z10 Issues with GMail Imap / Microsoft Active Exchange

Hi,
I have seen lots of posts coming in on here and on crackberry.com about issues with emails. But I couldn't find any posts on the issues that I am having.
Just purchased a new Z10, coming from a BB 9900.
I would like to setup my gmail account on here but I am getting unexpected results. I have tried many different ways, gmail, imap, Microsoft Exchange ActiveSync and pop3.
What I find different from everyone is that I have a bunch of filters set up that auto direct some emails away from the inbox and into labels (folders). So I know things have changed from the 9900, but the way it happened on there was that a new email would show up in my unified inbox on the BB whether or not it was filtered. Then after reading it, I would have to search for it because it wouldn't actually be stored in the inbox. Which I was fine with.
We'll have my email description setup as "Personal"
Issues that I am having:
Imap set up:
- When I go from hub to my "Personal" box, it is a duplicate of my inbox. Looks the same as my inbox in mail.google.com, all nice and dandy.
- Emails that go directly to my inbox show up nice and quick and give me a notification in the hub etc.. that an email has shown up.
- Now when I receive an email that is being filtered. Gmail.com has it right away in my labels. So I know it's there. I can wait the 15/30 minutes that is setup for the sync, but I never get a notification of the email. If I go to the folder (by clicking on the drop down by the email description) then it shows up there with the yellow mail saying that it's a new mail. But there still isn't a notification saying I got a new email.
So that's IMAP.
M$ Exchange ActiveSync set up:
- Initially, going straight to my personal box from the hub makes it look somewhat like what it did on my 9900. Inbox, and filtered messages all showing up in the default view.
- If I receive a NEW (not part of a conversation) message that is/is not being filtered it shows up in this default view and I get a notification in the hub.
- Once I read that email, then go back to the default view. IF it is a msg in the inbox, it disappears and the only way I can find it is by going to the drop down then to the Inbox. But this seems to be random, sometimes it stays, sometimes it disappears. Also, if it gets moved directly to the inbox and I get a reply to that message I don't get a notification for a new email.
- If the email is a filtered email, it stays in the default view.
- Now if I get an email that is part of a conversation to a filtered email, I don't get a notification that I have a new email, but if I go to it from the hub, it's marked as a yellow mail symbol stating that it is new. Read that email, it stays in the default view.
So that's M$ EAS.
Email:
*******@gmail.com, so not a Paid Account or anything, just a regular gmail account. IMAP settings turned on and setup.
Hub Settings:
Display Style: conversation
Display order: name, subject
display message count: on
display new message indicator: on
show filed messages: on
show sent messages: off
Download images automatically: off
delete message confirmation: off.
Oh when I tried the gmail setup I believe it just used the same settings as IMAP. Pop3. just a disaster, all my messages were brought in (sent/receieved) marked as unread. Won't even bother with Pop3.
I'm not sure if I'm doing something wrong with my setups, or that this is the way it is designed. I really don't want to have to check each folder everytime to see if have a new email. And I don't want to change my gmail setup so that nothing is filtered. I thought I had solved it with the M$ EAS but with the random moving of messages to other directories, it's a no go aswell.
If anyone has any ideas or suggestions for me it would be greatly appreciated.
Thanks.
Curtis

Hi,
I'm the author of the article linked to above. I appreciate the reference, but I don't think my article solves the OP's particular issues. To date, I've not found a way to enable notifications on new content in subfolders. I think this is a limitation in the BlackBerry 10 email client.
Since the paint is still wet on this OS, we can expect to see some improvements in forthcoming service releases. CalDAV for example is known by BlackBerry to be broken with Google Calendar. No ETA to fix at present. BlackBerry will have to address that, and soon.
I don't yet know if OS 10 is going to gain the traction the BlackBerry needs to survive in the market. If it does, I suspect we will see some third party email apps appearing in BlackBerry World in the future, with enhanced IMAP functionality. There's some precedent for this and we've seen similar happen on other mobile platforms. In any case, until BlackBerry does some email client rewrting, or an enterprising developer plugs the gap, I think the OP's niggle is going to remain. At the time of writing, BlackBerry World is showing a White Screen of Death. Figures.
One thing I'd urge all Google Apps users (especially of free accounts) to bear in mind is that Google will be pulling the plug on ActiveSync in the very near future. I've blogged about this in more detail, in a followup to my previously-mentioned post: Gmail + Google Apps on the BlackBerry Z10.
I hope this clarifies the position, even though the reality is less than satisfactory.
Rob

Issue with re-importing images after using Nik plugins

Currently, when images are edited in a Nik plug-in and saved back to Aperture, the project folder the image originated in is changed from being organized by "date" to "manual" and then that image is inserted as the first image in that folder. In past versions of Aperture, the image would be placed back into the project folder by date. At the very least I would like to have the control on where that image is placed. And my selection of how that project folder is organized should NEVER change unless asked.
Is there some hidden setting that can change this behavior?
Ken

Unfortunately, this issue was with some of the last versions of Snow Leopard as well. Oh, and for clarification, this happens with HDR efex. Others have commented that the Nik plugin is designed to work this way. Maybe, but I would like a choice where the image is returned. I believe it is a NIk issue but they won't admit it.
I did try your suggestion, but no luck. This image changed the project folder organization to "manual" and put the image first.
Ken

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

Issue with OHS (EPM) installation on Red Hat 6.4

Hello Gurus,
We are facing an issue with the installation of Oracle HTTP server which comes with EPM 11.1.2.2 using EPM Installer on Red Hat 6.4.
When I select the OHS product it says, that the Oracle software is not certified on the current operating system, however it does not happen with any other product in the suite
Is Red Hat 6.4 64 bit not a supported OS?
I have installed all the required libraries mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Also my NPTL version is 2.12 which is higher than 2.3.4 as mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Any help will be highly appreciated.

John,
My installation went smooth, however when I start the configuration (Oracle Database) I am getting the following error while configuring the shared service registry:
Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details.
My DBA says that he has provided all the following privileges to the schemas.
CREATE SESSION
CREATE VIEW
CREATE TYPE
CREATE TABLE
CREATE CLUSTER
CREATE TRIGGER
CREATE SEQUENCE
CREATE INDEXTYPE
CREATE PROCEDURE
CREATE ANY SYNONYM
DROP ANY SYNONYM
UNLIMITED TABLESPACE
configTool has the following exceptions:
[2013-09-10T10:44:53.748+05:30] [EPMCMN] [WARNING] [EPMCMN-01001] [oracle.EPMCMN] [tid: 10] [ecid: 0000K46JlSgAXNIMyqqYMG1IBegW000002,0] [SRC_CLASS: com.hyperion.cis.utils.oui.OUIUtilImpl] Failed to determine home via OUI: [[
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: The inventory pointer location /etc/oraInst.loc is either not readable or does not exist
    at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1855)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.inventoryTemplateMethod(OUIUtilImpl.java:289)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.findEpmOracleHomeFromInventory(OUIUtilImpl.java:67)
    at com.hyperion.cis.utils.oui.OUIUtilLinkageErrorProtectionWrapper.findEpmOracleHomeFromInventory(OUIUtilLinkageErrorProtectionWrapper.java:18)
    at com.oracle.preconfig.impl.InventoryPreConfigCheck.executeCheck(InventoryPreConfigCheck.java:23)
    at com.oracle.preconfig.PreConfigCheckTemplate.execute(PreConfigCheckTemplate.java:9)
    at Main.runPreconfigChecksAndExitIfFail(Main.java:142)
    at Main.main(Main.java:90)
com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:354)
    at com.hyperion.hit.registry.RegistryUtils.initUpgradeRegistry(RegistryUtils.java:272)
    at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:105)
    at com.hyperion.hit.registry.Registry.createBasicComponents(Registry.java:2305)
    at com.hyperion.config.document.Storage.initRegistry(Storage.java:245)
    at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:384)
    at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:228)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:544)
    at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.BatchUpdateException: error occurred during batching: ORA-01950: no privileges on tablespace 'HYPSS_DATA'
    at oracle.jdbc.driver.OracleStatement.executeBatch(OracleStatement.java:6390)
    at oracle.jdbc.driver.OracleStatementWrapper.executeBatch(OracleStatementWrapper.java:248)
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:344)
    ... 8 more
Any help will be highly appreciated.

Issue with Oracle Alerts after a recent chagne

Hi,
We use Oracle Alerts to send remainder emails regarding pending notifications. And we have configured these alerts to be run on specific dates of a month like 12th and 15th. For fixing any issues, we do the changes on our dev/test instance and extract them to an LDT and get them tested on QA instance and then move it to Production instance.
We have made a recent change to couple of the alerts which were supposed to be run on every 12th and 15th day of a calendar month, but after the changes they are run daily.
Following are the changes:
LDT extract before change:
BEGIN ALR_ALERTS "XBOL" "BAC OTL India Payroll Reminders to Managers on 12"
OWNER = "05132"
ALERT_CONDITION_TYPE = "P"
ENABLED_FLAG = "Y"
START_DATE_ACTIVE = "2009/08/13 00:00:00"
DESCRIPTION = "Payroll Reminders to Managers on 12th of month"
FREQUENCY_TYPE = "M"
MONTHLY_CHECK_DAY_NUM = "12"
DATE_LAST_CHECKED = "2010/02/22 05:12:08"
MAINTAIN_HISTORY_DAYS = "5"
CHECK_START_TIME = "48600"
SQL_STATEMENT_TEXT =
"SELECT\n\
LDT extract after change:
BEGIN ALR_ALERTS "XBOL" "BAC OTL India Payroll Reminders to Managers on 12"
OWNER = "021Y3"
ALERT_CONDITION_TYPE = "P"
ENABLED_FLAG = "Y"
START_DATE_ACTIVE = "2009/08/13 00:00:00"
DESCRIPTION = "Payroll Reminders to Managers on 12th of month"
FREQUENCY_TYPE = "M"
MONTHLY_CHECK_DAY_NUM = "12"
DATE_LAST_CHECKED = "2010/02/22 05:12:08"
MAINTAIN_HISTORY_DAYS = "30"
CHECK_START_TIME = "0"
SQL_STATEMENT_TEXT =
"select\n\
From the above, you can see nothing apart from MAINTAIN_HISTORY_DAYS & CHECK_START_TIME and the SQL query has been changed. Still the frequence type is M(monthly) and day to run is 12th. But still its being run daily.
Can you please let me know why changing history days and check start time is impacting the alert behavior over here. Is this expected behavior ?
Is it due to the date_last_checked being in 2010 ? If so, why the same behavior wasn't observed before change/fix ?
Regards,
Pramod.

Thanks for your response Gaurav. Reviewed the pointed out metalink note id's and they were very helpful.
The NEXT_SCHEDULED_CHECK in alr_periodic_alerts_view is set to 'T' for these two alerts which means it will be picked up by the next Periodic Scheduler run and hence it picked up. That clarifies the issue.
But this behavior was experienced only after the recent change, and with the past changes to these alerts, it used to get fired only on the scheduled date(like 12th in this case) and even at that times the NEXT_SCHEDULED_CHECK was set to 'T'.
The only extra modification this time was CHECK_START_TIME which was changed from 48600 to 0.
I was able to investigate further on this and when I set this back to 48600 and take date_last_checked back in time for this alert, it was not getting fired/run in the next time. Its running on the scheduled date only.
Appreciate any explanation on this ?

Clarification on issue with tablespaces

Similar Messages

Maybe you are looking for