Class Diagram not loading in VS 2013
I can create a class diagram in VS 13, but it will not show. I get an error that says, "URI formats are not supported". I got this error in VS 12 and the solution was to open my website in file system mode. This solution is not working for VS
13. How can I resolve this? thanks.
No mention of the Acrobat version. You need at AA XI at least and I think the updates are also needed. Otherwise, the upgrade to OFFICE 2013 has just required that you upgrade Acrobat also to be compatible with OFFICE.
Similar Messages
-
PDFMaker is not loading in outlook 2013
I have sucessfully installed Adobe Acrobat XI standard on Windows 7 with Office 2013. The add-in function of the pdfmaker is not working in Outlook, it is just not possible to activate pdfmaker - outlook is giving an error that this add in is not loaded because of a runtime error during loading.
I have tried to solve the problem with suggestions that can be found on the help pages of adobe like run repair of acrobat and activate registry manually - nothing helped.
Does anybody know how to solve this problem?
BR
GeraldNo mention of the Acrobat version. You need at AA XI at least and I think the updates are also needed. Otherwise, the upgrade to OFFICE 2013 has just required that you upgrade Acrobat also to be compatible with OFFICE.
-
Add-in does not load on Excel 2013 Professional Plus
I have Excel 2013 Professional Plus 32-bit running on Windows 7 (64 bit). I ran the Power Query 32 bit installer fine, but Excel now gives this error when starting up:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.File name: 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
I pressed Continue and then checked File > Options > Add-ins > COM Add-Ins and "Microsoft Power Query for Excel" is listed and checked on there, but Power Query's interface does not appear in the Ribbon.
Restarting the computer, restarting Excel, and toggling the COM Add-In have not helped.
This is happening on three computers that we have tested it on. All computers are new within the past few months and so there should not be any incompatibilities.
This was installed using the installer at
http://office.microsoft.com/en-us/excel/download-microsoft-power-query-for-excel-FX104018616.aspxResolved! As Curt suggests, I installed .NET 4.0 Full and then Power Query started working.
The Power Query 64 bit installer warns that .NET Full is required instead of .NET Client (the 32 bit installer did not):
.NET 4.0 Full is at
http://www.microsoft.com/en-us/download/details.aspx?id=17851
Some information on the difference between .NET Client Profile and the full .NET Framework is in the details of the .NET Client Profile download page:
"The Microsoft .NET Framework 4 Client Profile provides a subset of features from the .NET Framework 4. The Client Profile is designed to run client applications and to enable the fastest possible deployment for Windows Presentation Foundation (WPF)
and Windows Forms technology. Application developers who require features that are not included in the Client Profile should target the full
.NET Framework 4 instead of the Client Profile."
Curt- add in the link to the .NET 4.0 Full installer and I'll mark your post as the answer. -
Classes are not loading from WEB-INF/classes directory
Hi All,
I am in a deep troble because the class files in the WEB-INF/classes directory are not loading.
I have deployed the application in Tomcat 6 server. And stored all class files under WEB-INF/classes dirctory. But when I execute a JSP page, I am getting following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
JSP FileName:/hello.jsp
An error occurred at line: 1 in the jsp file: /hello.jsp
com.flt.Test cannot be resolved to a type
1: <%=new com.flt.Test().hello()%>
Stacktrace:
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:98)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)The classes are available in the WEB-INF/classes directory and the folder name and package name of the classes are correct. I have also tried to execute the application by creating a jar file and put it in the WEB-INF/lib directory. But I am getting same result.
Is it the problem with Tomcat configuration? When I gone through Tomcat documentation, I get to know that the WebAppX class loader in Tomcat, loads application specific classes for a web application. Is it possible to start/stop WebAppx classloader manually?
Please help me to solve this issue.
Many Thanks,
Francis Lukose
Edited by: francis_ on May 13, 2008 10:03 AMThanks for your reply, Soultech2012.
<%=new com.flt.Test().hello()%>is the only code in the JSP page. Just a single line. Nothing more than that.
The code in Test.java is as follows:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.flt;
* @author Francis Lukose
public class Test {
public static String hello() {
return "hello";
}Many Thanks,
Francis
Edited by: francis_ on May 13, 2008 6:45 PM -
JavaDoc HTML link of classes in Java class diagram not correct
Hi,
I created a Java class diagram in a certain package (e.g. com.mycompany.p1) and placed some classes on this diagram from the same package and from other packages. Then I created JavaDocs. When I click on the classes in the created JavaDoc diagram, only the links of the classes in the same package as the diagram (com.mycompany.p1) wor correctly. When I click on a class outside this package I get an error message that the file is not found. It looks for the class documentation in the package of the diagram and this is obviousely wrong!
Is there a property I missed to set or is it a bug?
Thanks for help
ThomasHi Thomas,
I don't use the diagrammers much, so I cannot comment on this directly; however, based on your description, it does sound like a defect. Do you have access to Oracle Support to file an SR?
John -
Class File Not Loaded (MainJNI)
I am Calling .FMX file in my HTML code
but i found error that they not load
oracle.forms.engine.MainJNI not loaded but i defined the classpath varaible.
What Should be the steps.oh and it is not swing ...jdk 1.4 only using AWT
-
Oulokk Addin is not loading in Outlook 2013(office 365 pro plus)
Hi,
I have an outlook Addin developed by me. It is installed successfully and working fine in outllok2010 & outlook 2013 desktop clients. But i have an issue with Office 365 pro plus.
I installed outlook2013 client using "Office365 Pro Plus". Outlook is installed successfully in my system.Actual behavior of outlook2013 is working fine. Now i installed my outlook Addin.When i open Outlook 2013 client, Our Addin was not displaying.
I checked "Outlook Properties-->Add-ins", here also my add-in is not displayinh.
Is Outlook addins are supported in outlook2013 clients, installed using Office365Pro Plus?
Any help can be appreciated.
Thanks,
kiranDid you find a solution to your problem? I have a similar issue with addins not being loaded (they show up as deactivated in Office 365).
-
WDK8 Templates are not loaded to VS 2013 Ultimate automatically?
I have installed the WDK8.1 and checked that a "Windows Kits" folder was created with all respective files in it.
However, in Visual Studio 2013 Ultimate the templates are still the same!
Do I need to configure them manually or what could be the problem?
PS: Platform Windows 7 64 bits, Visual Studio was installed before installing the WDK.Hi,
Welcome to MSDN forum.
But I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Please restart VS2013 then check whether the driver template appears under Visual C++ template. If still no driver template, one possible reason is WDK8.1 was not installed well, and maybe we need to configure something else to get the driver template, but
I am not WDK expert, I don’t know whether we need do something else in order to get driver template in VS2013, in order to resolve your issue better, I suggest you to consult on
Windows Hardware WDK and Driver Development forum like this similar thread:
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/0b91281d-4f90-4546-94c0-53a7b06729da/how-can-i-get-windows-driver-templates-to-show-in-visual-studio-2012?forum=wdk .
Thank you for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Jato 1.2 UML Class Diagrams
Hi All,
I have put together some UML class diagrams for JATO 1.2. You may find them
useful. Please let me know if you spot any errors.
Regards,
Dennis Parrott.
Dennis Parrott
Senior Consultant
iPlanet Professional Services
Sun Microsystems Limited
Guillemont Park
Camberley Mobile: +44 (0)7765 221938
GU17 9QG Email : dparrott@i...
iPlanet
e-commerce solutions
www.iplanet.com
[Non-text portions of this message have been removed]Hi Dennis--
Only we can post files for the group. We'll be happy to do so, or if you
would rather host a public site for them, we can post a link in the group.
(Looking forward to seeing the diagrams.)
Todd
----- Original Message -----
From: "Dennis Parrott" <dparrott@i...>
Sent: Monday, December 17, 2001 7:41 AM
Subject: RE: [iPlanet-JATO] Jato 1.2 UML Class Diagrams
Note the deliberate mistake - the document was not included - actually it
was removed - How can I publish this to the group?
Dennis Parrott[PARA]Senior Consultant[PARA]iPlanet Professional
Services[PARA]Sun Microsystems Limited[NL]Guillemont Park[NL]Camberley
Mobile: +44 (0)7765 221938[NL]GU17 9QG Email :
dparrott@i... iPlanet [PARA]e-commerce solutions
[PARA]www.iplanet.com
-----Original Message-----
From: Dennis Parrott [mailto:<a href="/group/SunONE-JATO/post?protectID=114154113180127190050057203026021130134026057192209171188199">dparrott@i...</a>]
Sent: 17 December 2001 15:35
Subject: [iPlanet-JATO] Jato 1.2 UML Class Diagrams
Hi All,
I have put together some UML class diagrams for JATO 1.2. You may findthem
useful. Please let me know if you spot any errors.
Regards,
Dennis Parrott.
Dennis Parrott
Senior Consultant
iPlanet Professional Services
Sun Microsystems Limited
Guillemont Park
Camberley Mobile: +44 (0)7765 221938
GU17 9QG Email : dparrott@i...
iPlanet
e-commerce solutions
www.iplanet.com
[Non-text portions of this message have been removed]
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Choose from 1000s of job listings!
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
J2ME List is not loading in PocketPC
{noformat}Hi,{noformat}{noformat}I'm with Aufat.in and I'm in JavaME development team.{noformat}{noformat}we were actually developing Map based product for our client.{noformat}{noformat}and able to successfully implement on Nokia phones.{noformat}{noformat}when we tried the same (working version ) on Windows Mobile(both i-mate and HTC). some of the forms are not loading. cant event trace the issue.{noformat}{noformat}especially, when List class is not loading at all.{noformat}
{noformat}Can anybody help in this issue,{noformat}{noformat}Your time & patience are appreciated.{noformat}{noformat}[email protected]{noformat}
Edited by: faisal_aufa on Jun 3, 2009 4:11 AMDear Carl,
I mean go to screen painter and place there CUSTOM_AREA (the icon with C letter). In program's PBO create CUSTOM_CONTAINER
module pbo output.
if custom_container is initial.
CREATE OBJECT custom_container
EXPORTING container_name = 'CUSTOM_AREA'.\
endif.
endmodule.
Then you work only with CUSTOM_CONTAINER (i.e. as parent to SPLITTER_CONTAINER). Using subscreens here doens't really add the value, so you don't need any.
But how could i stretch the screen and this area to full screen?is it just gragging the screen to full screen and drag the subscreen or the custom control to full screen in screen painter?
Yes, this is what I mean
Regards
Marcin -
I can not drag java class onto uml class diagram - why??
Hi
1. I created a new java web project
2. I created a new uml project.
3. I created new classes in the java web project.
4. I created a new "class diagram" in the uml project.
PROBLEM:
1. When I drag one of the classes onto the class diagram screen, nothing happens. That is, when I perform the "drop"...nothing happens.
(NOTE: when I drag a "package" to the class diagram, a box representing the java package appears... I just cant get this to work for a class(s) )
QUESTION:
Should I be able to drag a class (or classes) from my web project src folder onto the UML project's class diagram and have UML representations of the classes appear?Hi Shay
Unfortunately, I cannot view the suggested youtube stuff at work. (I'll try to view it when I get home)
But, in the meantime, I did kind of get things working...
After creating the java project and uml project (and initial class diagram), I had to
1. drag the java packages (containing the classes I wanted diagrammed) onto the root node of the UML project (i.e., located on the left side "navigation" bar). Afterward, the package appeared under the UML project....Then,
2. One by one I had to drag the individual java classes from the java project onto the root node of the UML project (i.e,. the classes then appeared under their respective packages under the UML project) . Then,
3. Then, finally, I could drag the java classes (listed under their respective packages under the UML project) onto the class diagram panel, where the rendered properly.
I dont know if this is supposed to be the way to "reverse engineer" java classes to be part of a UML class diagram... But, it was the only way I found that worked... thus far, anyway.
Thanks again for reading my post and answering so promptly.... That was much appreciated!
s -
An XJC compilation error - Could not load class (..) for type cvsversion
I've got a strange compilation error using NetBeans 4.0 (I'd guess the version does not matter here) and Ant 1.6.2. When the following task is executed,
<target name="compile_ofx_schema">
<antcall target="clean-ofx"/>
<delete dir="${ofx-jaxb-src.dir}"/>
<mkdir dir="${ofx-jaxb-src.dir}" />
<xjc schema="${schema.dir}/ofx102.xsd" package="com.xxx.ofx102" target="${ofx-jaxb-src.dir}">
<arg value="-nv" />
<arg value="-extension" />
</xjc>
</target>
I get the error from NetBeans console,
Class org.xml.sax.SAXException loaded from parent loader (parentFirst)
Class java.io.IOException loaded from parent loader (parentFirst)
D:\appserver\build.xml:797: unable to parse the schema. Error messages should have been provided
at com.sun.tools.xjc.XJCTask._doXJC(XJCTask.java:334)
at com.sun.tools.xjc.XJCTask.doXJC(XJCTask.java:283)
at com.sun.tools.xjc.XJCTask.execute(XJCTask.java:227)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:217)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:236)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
BUILD FAILED (total time: 4 seconds)
Could not load class (org.apache.tools.ant.tasksdefs.cvslib.CvsVersion) for type cvsversion
Could not load class (org.apache.tools.ant.tasksdefs.cvslib.CvsVersion) for type cvsversion
And when I run the Ant task from the command line, I don't get the error at all.
Any help is greatly appreciated.That was a great finding from you. Thank you.
I followed your alternative approach and updated the ant.jar file. The "Could not load class..." error went away but the stack trace still remains. Now I am clueless again since I have ant on the debug mode and can't find any more useful info.
Class com.sun.tools.xjc.reader.internalizer.LocatorTable loaded from ant loader (parentFirst)
Class java.util.HashSet loaded from parent loader (parentFirst)
Class javax.xml.parsers.DocumentBuilderFactory loaded from parent loader (parentFirst)
Couldn't load Resource org/netbeans/core/xml/DOMFactoryImpl.class
Couldn't load ResourceStream for META-INF/services/javax.xml.parsers.DocumentBuilderFactory
Class org.apache.crimson.jaxp.DocumentBuilderFactoryImpl loaded from parent loader (parentFirst)
Class javax.xml.parsers.SAXParserFactory loaded from parent loader (parentFirst)
Couldn't load Resource org/netbeans/core/xml/SAXFactoryImpl.class
Couldn't load ResourceStream for META-INF/services/javax.xml.parsers.SAXParserFactory
Class org.apache.crimson.jaxp.SAXParserFactoryImpl loaded from parent loader (parentFirst)
Class javax.xml.parsers.DocumentBuilder loaded from parent loader (parentFirst)
Class java.util.Map loaded from parent loader (parentFirst)
Class javax.xml.parsers.SAXParser loaded from parent loader (parentFirst)
Finding class com.sun.tools.xjc.reader.xmlschema.parser.XMLSchemaInternalizationLogic$ReferenceFinder
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/xmlschema/parser/XMLSchemaInternalizationLogic$ReferenceFinder.class
Finding class com.sun.tools.xjc.reader.internalizer.AbstractReferenceFinderImpl
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/internalizer/AbstractReferenceFinderImpl.class
Class org.xml.sax.helpers.XMLFilterImpl loaded from parent loader (parentFirst)
Class com.sun.tools.xjc.reader.internalizer.AbstractReferenceFinderImpl loaded from ant loader (parentFirst)
Class com.sun.tools.xjc.reader.xmlschema.parser.XMLSchemaInternalizationLogic$ReferenceFinder loaded from ant loader (parentFirst)
Class org.xml.sax.XMLFilter loaded from parent loader (parentFirst)
Finding class com.sun.tools.xjc.reader.internalizer.VersionChecker
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/internalizer/VersionChecker.class
Class com.sun.tools.xjc.reader.internalizer.VersionChecker loaded from ant loader (parentFirst)
Finding class com.sun.tools.xjc.reader.internalizer.DOMBuilder
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/internalizer/DOMBuilder.class
Finding class com.sun.xml.bind.marshaller.SAX2DOMEx
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-impl.jar com/sun/xml/bind/marshaller/SAX2DOMEx.class
Class org.xml.sax.ContentHandler loaded from parent loader (parentFirst)
Class com.sun.xml.bind.marshaller.SAX2DOMEx loaded from ant loader (parentFirst)
Class com.sun.tools.xjc.reader.internalizer.DOMBuilder loaded from ant loader (parentFirst)
Class java.util.Stack loaded from parent loader (parentFirst)
Class org.w3c.dom.Document loaded from parent loader (parentFirst)
Class org.xml.sax.XMLReader loaded from parent loader (parentFirst)
Class org.w3c.dom.Node loaded from parent loader (parentFirst)
Class org.w3c.dom.Element loaded from parent loader (parentFirst)
Class javax.xml.parsers.ParserConfigurationException loaded from parent loader (parentFirst)
Class org.xml.sax.SAXException loaded from parent loader (parentFirst)
Class java.io.IOException loaded from parent loader (parentFirst)
D:\bbw\build\Common_3.6\Packaged\appserver\build.xml:799: unable to parse the schema. Error messages should have been provided
at com.sun.tools.xjc.XJCTask._doXJC(XJCTask.java:334)
at com.sun.tools.xjc.XJCTask.doXJC(XJCTask.java:283)
at com.sun.tools.xjc.XJCTask.execute(XJCTask.java:227)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:217)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:236)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
BUILD FAILED (total time: 1 second)
Any suggestions? BTW, I did not upgrade NetBeans to v5.5 due that my code is still JDK1.4 based. -
I have placed my jar file in c:\tomcat6\webapps\my-application\WEB-INF\lib\myjarfile.jar
But, after restarting tomcat6, when i try to import the class file contained in the myjarfile.jar in a servlet, it says
ProcessFileUpload.java:4: package test.test1 does not exist
import test.test1.*;
^It clearly tomcat's class loading problem.
As i unzipped my jar and placed the packagefolder structure to
c:\tomcat6\webapps\my-application\WEB-INF\classes\testand it works perfectly.
Anyone knows its workaround? please suggest if any configuration changes is required in tomcat or so.
Thanks.
---SujoyThank you gimbal2 . There was error in creating the jar file myjarfile.jar.
But, now I have created it again and placed it in place
c:\tomcat6\webapps\my-application\WEB-INF\lib\myjarfile.jarand tried to use one on the Class file included within the jar to compile my servlet. But, still I am getting error at servlet compilation time. I want to place executable jar files in
c:\tomcat6\webapps\my-application\WEB-INF\lib\myjarfile.jar and compile my servlet and execute the servlet.
I DO NOT WANT TO unzip the jar, placing all unzipped files to
c:\tomcat6\webapps\my-application\WEB-INF\classes\ folder and comiple my servlet and execute the servlet. But, I am failing to user WEB-INF\lib\ folder facility....please help me why i am not getting class files from WEB-INF\lib\ folder.
If you please see the small code bit and tell me any possible error that would be very helpful.
Step 1: my library java file MyClass.java
package test.test1;
public class MyClass {
String myName = "Default return string value";
public void setMyName(String varName) {
this.myName = varName;
public String getMyName() {
return this.myName;
}Step2 : Creating jar file of my library class files
C:\jdk1.6\bin>jar cvf myjarfile.jar test
added manifest
adding: test/(in = 0) (out= 0)(stored 0%)
adding: test/test1/(in = 0) (out= 0)(stored 0%)
adding: test/test1/MyClass.class(in = 452) (out= 296)(deflated 34%)
adding: test/test1/MyClass.java(in = 230) (out= 140)(deflated 39%)
C:\jdk1.6\bin>Step3 : Double checking the created jar file content by listing its content
C:\jdk1.6\bin>jar tf myjarfile.jar
META-INF/
META-INF/MANIFEST.MF
test/
test/test1/
test/test1/MyClass.class
test/test1/MyClass.java
C:\jdk1.6\bin>Step4 : Placed myjarfile.jar to
c:\tomcat6\webapps\my-application\WEB-INF\lib\Step5 : Restarted standalone Tomcat6 in my Windows XP SP2.
Step6 : Created a simple servlet LibFolderTest.java within my-application\WEB-INF\classes\ folder with code
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import test.test1.*;
public class LibFolderTest extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
MyClass mc = new MyClass();
out.println(mc.getMyName());
}Step7 : Tried to compile my servlet LibFolderTest.java and got the following error
LibFolderTest.java:4: package test.test1 does not exist
import test.test1.*;
^
LibFolderTest.java:11: cannot find symbol
symbol : class MyClass
location: class LibFolderTest
MyClass mc = new MyClass();
^
LibFolderTest.java:11: cannot find symbol
symbol : class MyClass
location: class LibFolderTest
MyClass mc = new MyClass();
^
3 errorsThe above servlet compilation error on Step7 is telling me that myjarfile.jar is not loaded by Tomcat6 or not available for use when compiling servlet. I want to use myjarfile.jar from within WEB-INF\lib\ folder but I can not. please help.
---Sujoy -
The MBean class could not be loaded by the default loader repositor
Im trying to register a custom MBean to WebLogic 8.1 Sp5 Application Server but i get this error :
The MBean class could not be loaded by the default loader repository .
i have make a servelt that registers the Managed Bean i added the MBean jar file to the WAR file of the servelt and I added the Mbean jar file to the CLASSPATH in setEnv.cmd for the domain
the code for the servlet is this :
try
Hashtable props = new Hashtable();
props.put( Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory" );
props.put( Context.PROVIDER_URL, "t3://naiden:7001" );
props.put( Context.SECURITY_PRINCIPAL, "admin" );
props.put( Context.SECURITY_CREDENTIALS, "secret:)" );
InitialContext ctx = new InitialContext( props );
mbeanServer = ( MBeanServer )
ctx.lookup( "weblogic.management.server" );
logger.debug( "domain name e " + mbeanServer.getDefaultDomain() );
catch( NamingException ne )
error=ne.getMessage();
logger.debug( ne.getMessage() );
try {
ObjectName objName = new ObjectName("isy:Name=NaidenStandardMBean");
mbeanServer.createMBean("samplembean.Standard", objName);
catch( MalformedObjectNameException ex )
}You should use jre 1.5 or 1.6 for migmon from 7.10. It looks like your jre is 1.4.
-
Could not load file or assembly AjaxToolkit error in SharePoint 2013 Visual Webpart
I wanted to use ajax controls in visual webpart for sharepoint 2013 so i followed steps.
1-I cut this snippet (see below) from <head></head> Section and paste in <body></body> Section for my master page since it's a requirement for SharePoint 2013 ajax functionality.
Snippet:
<!--MS:<SharePoint:AjaxDelta id="DeltaSPWebPartManager" runat="server">-->
<!--MS:<WebPartPages:SPWebPartManager runat="server">-->
<!--ME:</WebPartPages:SPWebPartManager>-->
<!--ME:</SharePoint:AjaxDelta>-->
2-downloaded a latest ajax tool kit and then added ajax toolkit dll from the toolkit library in my solution's bin-->debug folder
now add ajax entries in web.config in these sections
in <SafeControls>
<SafeControl Assembly="ajaxcontroltoolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e, processorArchitecture=MSIL" Namespace="AjaxControlToolkit" TypeName="*" />
in <assemblies>
<add assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
in <controls>
<add tagPrefix="ajax" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
finally registered ajax in visual web part as
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajaxtoolkit" %>
added following calender control
<asp:TextBox MaxLength="10" ID="txtToDate" runat="server" CssClass="FormTextBoxSmall"></asp:TextBox>
<asp:ImageButton ID="calReqDateTo" runat="server" ImageUrl="" />
<ajaxtoolkit:CalendarExtender id="CalendarExtender2" runat="server" targetcontrolid="txtToDate"
format="dd/MM/yyyy" popupbuttonid="calReqDateTo" />
reset iis and deployed my solution but when i deployed it throws error
"could not load file or assembly AjaxToolkit,Version=4.1.7.1213 "
please helpHi,
In this below thread they have discussed and resolved your issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/60fa19fe-86a0-446b-b61f-11a82fe4287f/how-to-implement-ajax-toolkit-for-sharepoint2013?forum=sharepointdevelopment&prof=required
Please let us know if you need further details
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer
Maybe you are looking for
-
I may have just bought an ipod that doesn't work :(
I just purchased a 40GB ipod. It is the first one I have had so I know NOTHING about them. It worked as I paid the guy for it but the minute I got home I cannot get it to work. I can hear the computer inside trying to start but nothing. I plugged it
-
ITunes 11.0 is horrible!!!!
Can't copy songs from my iTunes library on my iMac to my iPod anymore! How moronic is that?
-
Hi all, I have a probleem after deleting my active directory from the azure portal. I'm trying to create a new active directory for over more than 72 hours, but I'm getting the message that the domain name [domain].onmicrosoft.com is already in use.
-
My typing cursor frequently goes crazy, not allowing me to type and jumping from place to place, deleting letters. Suddenly, a line I have typed will be highlighted and deleted at will. Also, mouse cursor moves at will, opening multiple pages in se
-
Need to pull records for full work week two weeks back
I wanted to pull the results from two date fields and calculate the lapsed time. Both dates in the calculation are from the same field, so I used the command feature in Crystal to differentiate the two SELECT max("A"."CREATED_DATE") as installerConta