Classic Registration Problems

Everytime I plug my new 80G Classic into my MacBook, iTunes wants to go through the registration steps. 5 times and counting.... It's getting annoying. The only fix I've found on the forum is to delete a prefs file on the iPod, but this seems to be for Windows only - as there's no pref file to be found on the unit itself.
Any ideas?

I was having the exact same problem with my brand new Classic over the weekend. When registering, I definitely was selecting OK to complete the transaction each time. Once registered, everything seemed fine and I was able to set my sync preferences and sync all my playlists. But when I would re-connect I would be prompted to register again. After about 5 such attempts (including removing the hidden itunesprefs file) I gave up and selected "Never Register" and registered the S/N directly with Apple.
So far I seem to be able to re-sync just fine with no more registration prompts. +{knocks on wood}+

Similar Messages

Hi I have an ipod classic.The problem I have is that the ipod seems to sync new music ok but I have a number of podcasts downloaded and they do not sync to the ipod.Any suggestions please ?

Hi I Have an Ipod classic.My problem is that the Ipod seems to sync music ok but I have a number of podcasts downloaded to itunes but these don't sync to the ipod,(they have in the past,but no longer). Has anyone any suggestions please ?

hi gary
have you tried to sync your ipod ,when you click on the side where it shows your ipod?
Click on where it shows your ipod name for example garys ipod,when it opens up the summary page click the sync box,bottom right,and see if that helps.
In the summary page click on podcasts,click the box on sync podcast box (top),read before when the box opens and says are you sure you want sync podcasts.,theres a box underneath,which says automatically include ,make sure thats ticked.
hope this may help madforit

Cisco 9951 and cucme registration problem

Hi Everybody
I am trying to register a cisco 9951 phone to a cucme. The phone was previosly connected and registered to a cucm 9.1, now it must be registered in the cucme. The problem is that the status messages of the phone show that the phone has 9.3(2) firmware version and the cucme has 9.2(1) sip9951.9-2-2SR1-9.loads. It means that the phone has a higher version than the version in the router flash (cucme).
I tryed tod download a newer cucme file-set but the last version available in cisco.com is the 10.0 and it has the sip9951.9-2-2SR1-9.loads file which is still older than the version in the phone. So the phone doesnt register.
I follow step by step the instructions to configure and register ip sip phones to cucme. but I am stock.
here is the configuration:voice register global
mode cme
source-address X.X.6.54 port 5060
max-dn 10
max-pool 5
load 9951 sip9951.9-2-2SR1-9
timezone 42
tftp-path flash:
create profile sync 0001184550824421
camera
video
voice register dn 1
number 4002
name SIPPhone 2
voice register pool 1
id mac 501C.BFFC.DD85
type 9951
number 1 dn 1
username nico password 12345
description +571344002
camera
video
tftp-server flash:Phones/9951/dkern9951.100609R2-9-2-2SR1-9.sebn alias dkern9951.100609R2-9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/kern9951.9-2-2SR1-9.sebn alias kern9951.9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/rootfs9951.9-2-2SR1-9.sebn alias rootfs9951.9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/sboot9951.031610R1-9-2-2SR1-9.sebn alias sboot9951.031610R1-9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/sip9951.9-2-2SR1-9.loads alias sip9951.9-2-2SR1-9.loads
tftp-server flash:Phones/9951/skern9951.022809R2-9-2-2SR1-9.sebn alias skern9951.022809R2-9-2-2SR1-9.sebn
the status mesages on the phone say:
Upgrade rejected: HW compat failure. Must use 9.3(2) or later release on this phone
Error updating locale
It still shows:
File not found United_States/g4tones.xml
File not found SIP_English_United_States/ik-sip.jar
Those files tha the phone doesnt find are in the cucm 9.1. I tryed to put them in the flash and configured the tftp-server command and I also downloaded the 9.3(2) from the cucm and copied to the router flash, but it still has registrations problems.
I also tryed to reset the phone to the factory defaults but this sequence with # key and 123456789*0# doesnt aply to sip phones and the procedure of the following link still doesnt work:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/10_0/english/adminguide/P567_BK_A27DADFD_00_adminguide-8961-9951-9971-10_0/P567_BK_A27DADFD_00_adminguide-8961-9951-9971-10_0_chapter_010100.html
Please help me with this issue.
Best regards

Hi Sayeed,
Can you please send accross SIP messages when phone is trying to register with CME ?
Thanks
Manish

Classic environment problem in Tiger

I recently installed OS 10.4 and updated to 10.4.8. I had been using 10.2.8 and I was having no trouble with OS 9 or the classic environment. Today I tried to start up OS 9 and here are the messages.
1. install Quick Time 6.0.3 or later
2. Classic needs to update files in System Folder
3. There is a problem with updating the Classic specific files
4. Classic was unable to update it's files in System folder.
Do you have advice on how to update System Folder in OS 9 so I can open the system?
17-inch flat panel iMac G4 Mac OS X (10.4.8)

Hi, Gail.
You might want to be sure you are running Mac OS 9.2.2 for Classic. A number of interesting Classic-related problems have been noted unless one is using that specific version of Mac OS 9 for Classic under Tiger. Essentially, Tiger requires Mac OS 9.2.2 for Classic.
If you're not using 9.2.2 for Classic you can find the relevant Mac OS 9 updates here.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

LMS application registration problem

Hi,
I have a problem with the application registration of Campus Manager 5.2.1 under LMS 3.2.
Right now in the "Functional" tab of the LMS portal the "Campus Manager" view is empty.
In "Common Services" - "Server" - "Home Page Admin" - "Application Registration" Campus Manager is missing in the list of registered applications.
I can connect to the Campus Manager using the direct link http://<servername>:1741/campus/adminIntro.do.
The "CM" tab on the LMS portal page works.
I tried to register it this way:
In the CS Homepage Admin I click on "Register" - "Register from Templates" - "Next"
Then I get the list of templates. I select "Campus Manager" - "Next".
I enter these values:
Server name: fully qualified name of the server
Server Display Name: hostname of the server
Port: 1741
Protocol: http
When I click on "Next" - "Finish" the Campus Manager is not added to the list of registered application and I get no error message.
Did I enter wrong values? Where can I find corresponding log/debug messages?

It sounds like the CMIC database may be corrupt. There is a process to recover this, but it's somewhat complicated. If you open a TAC service request, your engineer can walk you through the process. This will clear out the CMIC database and reregister all applications. That should sort you out.

HP Officejet Pro L7780 - Registration Problem

I downloaded and installed the full software for the HP Officejet Pro L7780. When the software asks to be registered and I put in the printer and the search comes back 0. I have tried the name and the product number and still keep getting the same result 0. When I hit enter, the registration goes away and I have this running on my computer. I can't seem to get it to complete. Please tell me there is a simply solution to this. Thanks
This question was solved.
View Solution.

I fixed the problem by terminating the process and everything is right with the world.

Product registration problems

with respect,
hello, im am charlie, I just bought a macbook pro 15 "on 01-july-2011 in eStore authorized resellers in Indonesia with no series" W8050XXXXXX "and register the product. until now dated 04-july-2011 and I did not receive a confirmation e-mail that the macbook pro 15 "I have been registered.
and if I check on https://selfsolve.apple.com/agreementWarrantyDynamic.do
it will look something like this:
"Please register your product
Apple is Unable to Provide information about your service coverage. Please sign in with your Apple ID and Provide your product's date of purchase so That We Can display your coverage information. "
and if I continue to fill in the date of purchase then it would appear are like this:
"We're sorry, but We Are Unable to register your product with That purchase date. To complete registration, please submit your proof of purchase.
Your warranty is the same whether or not you register. See your service options "
so, what should I do?
please help for this problem quickly resolved perfectly.
Charlie
Indonesia

not like that, because of its web interface written in day / month / year
so what should I do? Anyone know the email contact apple is concernedwith thisproblem?

Ccmsping registration problem in Solution manager

hi,
I am installing CCMSPING agent to check "System Availability" from Solution Manager.
In our system ladscape we have multiple systems on sigle host. for eg) TP7 & DW1 on single host cpafisb8.
I have successfully registered the CCMSPING agent in Solman.
I have followed the Availability doc for registeration CCMSPING. Following are the major steps that i have done:
1)Download & extract CCMSAGENT from market place.
2)Configuration of Central Monitoring system.
3)Registration of CCMSPING using command u201Cccmsping -push -Ru201D.
4)Configured Availability Monitoring in Central System (i.e. Solution Manager) in RZ21.
As result i can see the stellite sytem node in RZ20 under " SAP CCMS Monitor Templates-->Availability and Performance Overview".
When i go to transaction "solman_workcenter" in tab "System Landscape management", i can see the staus of system as Green for the system i registered.
Now, the problem i facing in in transaction solman_workcenter is described as follows:
As i mentioned We have multiple systems on single host, for eg) TP7 & DW1 are on the same host "cpafisb8",
hence if CCMSPING has been registered for TP7 the status is green for DW1 too even if DW1 has no entry in RZ21.
Strange thing is DW1 was showing.
I have tried following three options to make the status correct in solman_workcenter:
1) I have maintained hostname for TP7 as "TP7.afis.chevrontexaco.net" which is alias for
hostname cpafisb8 in RZ21 & SMSY & status is correctly showing green for TP7 but still for DW1 which is not defined in RZ21, status is showing green.
2)I have unregistered the CCMSPING fron TP7. TP7 status has been changed to gray but strange thing happeneing was DW1 status was still green even no ccmsping process was running on the DW1 host.
3)I have registered the CCMSPING for TP7 with its central instance profile options using command:
ccmsping -R -push -n31 pf=/usr/chevron/TP7/profile/TP7_DVEBMGS31_cpafisb8
and agin configured TP7 in solution manager & status changed gray to green for TP7, but no change happening in DW1 status.
Can anyone please help on this strange behavior of Solman_workcenter.

Hi,
Thanks for he reply..
But i have already followed the process that you described or CCMSPING registration. and CCMSPING is transfering the data successully from satellite system to solution manger.
And as result of successul registration i can see the status of that satellite system as green in transaction "solman_workcenter".
But as i described earlier we have multiple systems registered on single host.for eg)SY1 & SY2 on host1
Hence even though the CCMSPING is not registred for SY2 & only registered or SY1 on host1 with RZ21 configuration in solution manager for SY1; SY2 status is also shown green in transaction solman_workcenter.
I want that only status of SY1 should be shown as green in solution manger under transaction "solman_workcenter".
I hope you understood the issue.
thanks

Registration problems using itunes Music Card

Hi - anyone out there having a problem registering with a music card? Seems music store has acknowledged redemption of card but will not allow registration because payment field demands credit card details which, naturally,I don't want to give!
Also support says there is a "None" button in payment field to indicate no credit card because you want to use a music card but when I register there is no such button!
Could my problem have been caused because I redeemed the music card BEFORE registering for an account?
Have sent an inquiry e-mail to iTunes but thought someone out there might be able to help out a bit quicker! Thanks

You redeem a card one time only. The entire amount is then transferred to the account that redeemed it. The card is of no use after this. The credit has beenr edeemed. it does not stay on the card at all.

Web service registration problem

Hi,
I must use a web service in MII transaction.
There is no problem about registration of web service In Ms-VisualStudio.Net environment , But problem in MII.
After registration in VS.Net there is generated an .xsd file near .wsdl file.
Is the problem with .xsd file MII can not bring it?
Thanks.

I inserted .xsd into .wsdl

Code Olympics , registration problem

hi,
I am not able to update the 'Features of Product" textbox on the registration page(GreenField Venture).The changes are not reflected.Copy-paste is also not working properly.
Is someone else is also facing the same problem?

what is Code Olympics ?
Regards
Raja

80gb Classic - registration loop and can't update firmware to 1.0.2

I finally talked my dad into getting an iPod and now he regrets the decision.
We downloaded the latest version of iTunes, set up his library on an external hard drive, and spent several days ripping his extensive CD collection to the hard drive. When the time came to finally sync the iPod, everything went well until I clicked "update" to update the firmware to 1.0.2. It downloaded OK, but when it tried to install the update, we got the following error message: "The iPod Could not be updated. You do not have enough access priviledge for this operation." When we disconnected and reconnected the iPod to try it again, we had to go through the registration process again. This has happened each time we try to sync the iPod. This is on a Vista machine, and my dad was logged in with administrator access, so we're kind stumped as to what the problem may be. We've tried uninstalling and reinstalling iTunes, and resetting the iPod, to no avail. Any suggestions?

We have uninstalled and reinstalled itunes again, and this time it seems to have solved the problem. Now we're having another one which I'm currently scanning the forum for solutions. Now he's getting repeated albums in the album list view. The same two albums are repeated on the iPod 13 times, where they are only in iTunes once. We tried using iTunes to restore the iPod, and we got the same "insufficient access priviledge" error message. AAAAARGH!!!
But in answer to your question, Mobbie, I believe we have another computer we can use. Since the music is on an external hard drive, it shouldn't be too hard to try that to fix this new problem.
Message was edited by: sdimartino

Registration problems

I recently downloaded the free trial with which I am very impressed. I have started cataloguing past photos and have ordered the full version (shh from Amazon - sorry!). Whilst waiting for it to arrive I want to keep working on my pictures - I assume the tags etc will be imported into the full edition when it is installed.
My problem is that everytime I complete the registration process form it 'fails to connect' despite me ticking all the boxes to be on mailing lists etc (which I don't normally like to do.) I'm in Europe (UK) and am running out of the number of times I can use the trial product - can you help?
Thanks

Thank you - yes but not just Firewall but all security things had to be disabled then it worked - will now scan for any nasties that came in at the same time!
Very impressed with the speedy response - thanks.
Gill

Classic sync problems

Following a problem with my computer, I reinstalled iTunes and successfully copied all music back on from an external hard drive back up. However, my Classic won't sync with iTunes even though it's recognised.
First message says the iPod is sync'd with a different library. There is an option to erase and transfer, which I've tried, but that doesn't work. It then tells me some of the tracks on the iPod aren't authorised to be played on the computer. This seems to be linked to a problem with items purchased with a different email address, but on the same computer.
So I have some songs i've bought but can't play, and an iPod that won't sync at all. Other than that, life's perfect!
Any advice gratefully received

You need to authorize the computer for each iTunes Store account, which can be done from the Store menu.
(55154)

160Gb Classic Playlist Problems

I own a 160Gb iPod classic, and it has worked fairly well for me. I enjoy being able to store all of my 20000+ music library on one device, and I have spent a substantial amount of time creating playlists that make the music more accessible. My problems lies in my iPod's opening of playlists. It simply will not open the playlist folder. My ipod freezes nearly every time I try to open the playlist folder on my iPod. The only time I am able to open my playlists is immediately after I reset my iPod, and once I do get the playlist folder to open and play a playlist, the iPod freezes when trying to back out of the playlist. I have over 20 playlists in iTunes, some are smart playlists, while others are manually made mixes. My old 60Gb 5th generation iPod never had a problem opening any of my playlists. This problem is quite frustrating since resetting my ipod any time I want to listen to a playlist, or change a playlist it quite annoying since my iPod takes nearly 5 minutes to reset. Is anybody else having this issue? Is there any way around it? Any help would be greatly appreciated.

I"m not sure if this is any help, Steve, but . . . A new "feature" of the 160G Classic is that it calculates the number of songs in each playlist before actually displaying those lists. This doesn't happen within iTunes on our Macs, of course.
But when I select "Playlists" on my iPod, there is a 30+ second "pause" while the device calculates the contents of my lists. This, of course, LOOKS as if the iPod is frozen. It's NOT, but I am well aware that, in lieu of a 1.0.3 update, the more playlists I add, and the more songs I add to each one, the longer it will take to move from point to point.
IMHO, this calculation of playlist contents MUST be removed or, at least, made an option in order for our players to recapture their former speed and vigor.

Classic Registration Problems

Similar Messages

Maybe you are looking for