Classification text objects
We are using classification objects in our BW system. One of our master data objects has about 50 attuibutes from classification data. When we make a change to the master data object and transport it to QA or PRD we get about 20 to 30 text object load failures. The error is just a replicate error, but I have to replicate a lot of objects. I know I can replicate all objects in BW after the transport but I do not want to do this. Is there a way to get around this or am I stuck replicating these text objects 1 by 1?
Thank you,
Aaron
Hi,
KSSK, KLAH, AUSP are the relevant tables.
To read the characteristics w.r.t an object,
use BAPI: BAPI_OBJCL_GETDETAIL
also you can check all the BAPI/FM for your reqmt., in FuGr: CLBPA
Best Regards, Murugesh AS
Similar Messages
-
How to create a text object at runtime?
Hi,
I am using crystal reports for visual studio 2010 and using c# to programming.
I need to create a text object in a specific section like section 2. and also I need to control the text object's position and text.
I tried to move a object like:
reportDocument1.ReportDefinition.Sections[j].ReportObjects<i>.Left = 0x8760;
but object's position doesn't change at all.
How can I do these (create a text object and change a object postion)?
ThanksHi Don,
Thank you.
I have downloaded a RAS ( report application Server ) sample.
The sample uses the Business Objects Enterprise XI release 2. I am using win 7 and crystal reports for vs2010. Can I use this version of crystal reports to create a text object at runtime? If not, what is the lowest version I have to purchase to achieve what I want?
Basicly I need following capabilities at runtime:
1) craete text objects, line objects, image objects.
2) change text object, line object and image object positions, sizes, values of text object. If can I like to be able to change font as well.
3) supress objects, sections.
4) change section's height -
How to make a text in a text object Bold at run time
I would like to make a text in a text object Bold depends on a record value. how can I control that ?
Edited by: Hagita1 on Jan 18, 2011 10:51 AM
I found the solution-Thank youYou should share your solution with the community.
-
How can I align a text object by the visible text and NOT by its bounding box?
Illustrator CS4.
I am trying to align some text to the center of the artboard. The bounding box is bigger than the text, so when I try to align it to the artboard it doesn't actually center align the artwork as I need it to. The text is needing to be aligned with another text object, so I can't just center align the text and then align to the artboard (which would eliminate the bounding box problem, I think). To make matters worse, the text I want to align has a stroke.
The only way I know to currently align the text properly is to convert it to outlines. This is what I've done, but I need something better. I want to be able to have my illustrator file that has all editable text and then be able to make a separate identical file with all text converted to outlined paths. The only thing holding me back right now is that I can't get the exact alignment while everything is still as text.The solution is to simple to believe and probably why you over looked it.
You make two text frames to exactly the height and width of the text. You position the text in the relative location and then group the text frames then center that group on the artboard.
Like such:
If you ever want to add text that should be no problem but you have to re center. -
Text ID for text object MATERIAL does not exist - MM01
Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
RajHi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj -
Text ID for text object BUT000 does not exist
Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Juliannafor this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000. -
Error message while creating text object
I am trying to create a text object and text id's for an application. I go to se75 to do this and make a text object called ZABC and upon save I get an informational message saying the following:
Observe name ranges: Y,Z for customers, J_NC for partners, A..X for SAP
When I click the green checkbox, it pops up another box saying the object is not within the valid name range. Save anyway?
I tried creating one with Z_ABC and that came up with the same thing. What am I doing wrong here?
Thanks,
JoshRead the information message carefully. Then proceed, if you intend to have custom "standard" texts (sort of an oxymoron, but everyplace I've been does this)...
If you are working in a customer system, only create standard texts using the following naming convention:
Initial letter Y or Z in the text name with any text ID
or
Initial letter Y or Z in the text ID with any text name -
Can't add database field or text object to a report (new and existing)
We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report. I get a prohibition symbol (circle with a backslash inside it) when I hover over the report. Has anyone encoutered something like this? Any suggestions? Thank you.
Do you have two monitors?
I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
Ian -
How to drag the end of two text objects at the same time
I have two seperate bits of text in a particular section of video. If I select the two text objects and drag the end left or right it only moves one. I I want to be able to drag the end of multiple things at the same time.
I may be being dumb but cant find how to do it. Any solutions gratefully received.
Best
Tom B.Two stacked separate title clips or two text text boxes in a single clip?
Russ -
Do you know how to change the Text Object for Billing Document?
Hi,
If you execute Transaction VOTX or VOTXn it will take you to Text Determination. The Billing Doc & Sales Document both has the VBBK as Text Object for me and is it like that for all.
I need to change the Text Object to VBRK for Billing Doc, which is the ideal because I am using the Function Module READ_TEXT to retrieve text. This work perfectly for Sales Document which has VBBK as Text Object, but does not work for Billing Doc where it through as error message saying Text 0020000021 ID 0002 language EN not found.
Thank You
KishanHi kishan,
For updating these text you can use FM 'SAVE_TEXT'.
As for your problem, to get the parameter you need, go to the billing document, go to the text, and display it in plain page mode.
Then you do 'GO TO' -> 'HEADER', and a pop-up window open with the parameters you need Obect type, ID, Name, ...
Regards,
Erwan. -
Text Object with a Paramter Field in It
think I am losing my mind. I have a text object on my report for the 'From' and 'To' dates on a report. So that the spacing works between the words, I add a text object to my report and type the word "From" (without quotes). Then, I drag the start date into the field next to the word From. Then I type "To" and insert the ending date.
I right justify the contents of the field. I position the object on the right side of the report (not right at the margins about 1/4" in).
Just above this combined field, is a special field with the print date. It is also right justified and the two fields are right aligned.
The problem is when the report prints, the combined field isn't truly right justified. There are what appears to be extra spaces in it. The fields look similar to this...
02/20/2009
Report range 01/01/2008 to 12/31/2009
They should be perfectly aligned based on the CR layout. I have done some testing. If I remove the text and just leave the dates in the text object, I have the same results. It looks like it has something to do with the brackets that get placed around the parameter field when it is placed inside the text object.
Report range {?datdeb} to {?datfin}
Has anyone else run across this? I have noticed this on several of my reports and decided to try and find a solution.
Could it be a variable font issue? The problem goes away if I use Lucida Console (a fixed width font). It is somewhat better but not perfect with Verdana as the font. It is horrible when using Arial. I can't believe this is an issue that others have not run across. I searched the forum with no luck.
Thanks in advance.
Gilley EstesWith the help of one of our programmers, he suggested using a Trim function in case there were extra spaces in the field. So this is what I ended up doing.
Created a formula with the following:
"Report Range " + Trim (totext({?datdeb})) + " to " + Trim (totext({?datfin}))
?datedeb = beginning date parameter
?datefin = ending date parameter
By using the trim function, the extra spaces that were inserted into the field were removed.
Go figure! Oh well... At least there is a solution.
HTH someone in the future...
Gilley -
Help to get text objects in ABAP
Hi guys!
I've created my first report program and need some help to get text objects into the report. The program combines the tables KNA1, LIKP, LIPS, VBAK, VBAP and VBKD to create a deliverylist which we import as excel info a shipping service. The issue at hand is that our website allows customers to change the ship-to party's address when creating an order. The adress are not updated to KNA1, but are comitted as a text on the ship-to on the delivery itself.
The text I need in the report is RV50A-TXTWE.
Can you help me get going on how to add this from the delivery?
Thanks a lot!Your problem is that its a structure. Structures are filled in a program and no longer exist after the program is closed. They are temporary data. It will have been moved to tables somewhere most likely. The next step is to debug / trace through the code to find out what was done with it.
What program were you using that created the structure?
Neal -
Purchase Order Text Object missing in Transcation VOTXN
Hi Experts
I want Purchase Order Text Object in Transction VOTXN, for that Referring SAP Note 75144 - EKKO EKPO entries should be in table TFRM, if these two entries are missing, using the solution contained in Note 524453 to generate the missing entries in the table TFRM, run program RV80INCTFRM. I run that program too but still am not able to see purchase order text in Tcode VOTXN.
Please help me on this....The note Note 524453 - Purchasing text determination is not transported mentions that you need to run program RV80HGEN after RV80INCTFRM. Did you run this program? What is your SAP version? Did you also check other notes provided in 524453?
Regards, -
Customer Master Text object extract
Hi Guys,
I am working migration of Customer master data from 3.1i systems to ECC 6.0 systems. So can you please help how i can extract and migrate the Text objects for the Customer master which is maintained in the tables STXH and STXL.
Regards,
Vinniehi,
Each text is maintained in Text id's, so you can ask your abaper to pick up the date from that text id and store it in a Ztable, then copy or import the same in ECC6.0 version and update at customer level.
Regards,
Sudhir -
How can I embed a text field inside a text object in a fillable form?
I am a new user of LiveCycle and am slowly figuring things out. I don't really understand any of the scripts-- thatlevel is way beyod me. I am hoping that someone can tell me an easy way to insert a fillable text field into a text object. I have been assigned a huge project of converting some very old Word forms into fillable PDF forms. I have done okay with many of them, but ran into a snag with some of the form letters that our employees need to fill out. Basically, there is a block of text (the body of the letter) in which employees will need to be able to type in a date that the recipient of the letter must respond by. I have read up on floating fields and thought that was the solution to my problem, but it seems that floating fields are really just meant to be filled from a data source rather than having info typed into them.
Can anyone help-- I am desperate at this point. There has to be an easy way to insert a fillable text field object or a Date/Time object into a block of text so that the surrounding text will expand and contract around the length of the date entered (this is important, as many of these letters pertain to legal matters and cannot have blank spaces in them).Hi,
You can split your text object into different parts and place text fields inbetween the parts. With a little manuvering, you can make it look good.
An alternative is to place text field(s) outside the letter body (and set the visibilaty to screen only). Use these to populate the floating field.
or
script the external text fields (or the subform containing them) to be "hidden" using the "Preprint" event, then revealing them ("visible") again using the "Postprint" event.
Hope this helps, good luck!
Stephen
Maybe you are looking for
-
Back Up During Firmware 2.1 Update
I've been trying to update my iPhone using iTunes 8, but there seems to be some kind of Zeno's paradox at work, because the further it gets along in the back up process, the slower it seems to be going. I left it running last night, and came back thi
-
i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?
-
Create A Rotator Banner in DW?
Hey, I have Dreamweaver MX and I was wondering if it was possible to create a banner of rotating images. I just want a series of 5 images to rotate on a loop. I'd like to be able to fade up/down, but that's not really necessary. Thanks! :)
-
Errors during Loading TD from Flat file to PSA
Hi Guys, I got some errors while loading the flat file transaction data into PSA using infopackage. Could you guys can help me to solve the below errors. It would be more appreciated if you guys could send some material which tells about these types
-
Can i get the ios 6.1.3 back
can i get back the ios 6 because the ios 7 is messing up my ipod.