Clean install W7 Pro - no drivers, cannot connect to net, help needed

In a few words..
Got in office E 550 for work, it was full of bloatware and in my language which is useless for work..
After installing clean Windows 7 Pro I cannot connect neither to Wifi or LAN. I have downloaded drivers from Lenovo, to another computer, transfer them with USB to Lenovo on C: and install but still not working and that little computer sign in lower right corner is red crossed. Any help please as this is office computer which I need for work. Our IT is not here in same town...
Im also getting message that "Windows did not detect any networking hardware"
EDIT: errors

Welcome to the Lenovo Community !
If did not install the Intel Chipset Driver and the Intel ME Driver I recommend you do so.  Those drivers needs to be installed first so that the operating system will correctly installed the remaining hardware drivers.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Similar Messages

  • Hi all. I have upgraded to 10.6.8 Snow Leopard on my Mac Pro but still cannot connect to App store  to upgrade to Mountain Lion. Any advice?

    Hi all, I have upgraded to 10.6.8 Snow leopard on my Mac Pro but still cannot connect to App store.  I want to connect to upgrade to Mountain Lion but ony get the message "you are not connected to App store"  or "Check your internet connections, error -52". My internet is working OK for everything else.Any advice?

    Then I will have to assume a faulty installation.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Mac OS X 10.6.8 Update Combo v1.1.

  • Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

    cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

    Try restarting your WiFi router by removing power to it for 30 seconds.

  • When I  accept a incoming call face time says connecting but it cannot connect. Pls help me.

    when I  accept a incoming call face time says connecting but it cannot connect. Pls help me.

    A slow Internet connection in between both parties is a typical reason for the connection taking "forever".

  • I just bought an iPad and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

    I just bought an iPad2 and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Basic troubleshooting
    From Here
    http://www.apple.com/support/ipad/basics/

  • How to install pro p1102 drivers without connecting the printer (for RDP printing)

    Need to install drivers on a work PC so it will show up when I connect via a remote connection. Cannot install those drvers unless I physically connect the printer which is not possible. How can I get just the drivers installed?

    Hi,
    The P1102 is an Host-Based printer, it do not support remote printing such as Cireix, Terminal Services or ODP Printing.
    You may check the following document as a reference:
    http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-8465ENW.pdf
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I am trying to do a clean install MacBook Pro

    I am trying to do a clean install on my Dad's older MackBook Pro. He downloads things he shouldn't and after frustrations trying to wipe ou trojans and bad files I just decided that the only way to make this thing work again is to clean install it. It was already running yosemite when I started.
    I followed the directions at
    www.osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
    I used a flash drive to install os x yosemite installer and made it bootable per the instructions on the site.
    Everything seemed to work fine, I loaded the drive as the statup disk, I erased the partitions and the hard drive with disk utitilies using the installer flash drive.
    However when I try to start to Install Os X it runs for about 10 minutes and then gets stuck at "one second left" I accessed the log errors and got this
    Apr 19 21:01:40 MacBook-Pro.local InstallAssistant[415]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IASetupWindowController) to (PUKDiskPickerHorizontalView): missing setter or instance variable
    Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistProgress) outlet from (IASetupWindowController) to (NSProgressIndicator): missing setter or instance variable
    Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistView) outlet from (IASetupWindowController) to (NSView): missing setter or instance variable
    Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (subtitle) outlet from (IASetupWindowController) to (NSTextField): missing setter or instance variable
    Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IAContentView) to (PUKDiskPickerHorizontalView): missing setter or instance variable
    Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.708 InstallAssistant[415:17328] ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981cbde640 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
    Apr 19 21:01:49 MacBook-Pro.local Unknown[397]:     NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
    Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
    Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.712 InstallAssistant[415:17328] ***cachedResponseForRequest:key:handler failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981ce92fe0 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
    Apr 19 21:01:49 MacBook-Pro.local Unknown[397]:     NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
    Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
    Apr 19 21:01:50 MacBook-Pro.local InstallAssistant[415]: GetDYLDEntryPointWithImage(/System/Library/PrivateFrameworks/CacheDelete.framew ork/CacheDelete,CacheDeleteCopyPurgeableSpaceWithInfo) failed.
    Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
    Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
    Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
    Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
    Apr 19 21:03:44 MacBook-Pro.local Unknown[397]: 2015-04-19 21:03:44.052 InstallAssistant[415:17320] Layout still needs update after calling -[NSScrollView layout].  NSScrollView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it.  Both are programming errors in Cocoa Autolayout.  The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
    I already have his pertinant files back up. I just need to install a new system on this empty hard drive. What did I do wrong?
    Matt

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • Satellite Pro L300-1B9 cannot connect to my Wireless router

    Hi!
    I have activated the wireless nw on SAT L300 PRO 1B9 - but with many fight...
    First I needed to find the switch to enable (I never though that it have... :-) ).
    Then I needed to deinstall Atheros in Windows, and set the flags on (enable) in the Windows driver.
    But in both Linux and Windows I couldn't connect to my Wireless router.
    My luck was that some of my neightbours have security-disabled, open wireless network, what I could map to test.
    The test was succecfully with that network, but my wireless router was unreachable.
    From other machine I could reach it.
    The result was:
    If I set the router to broadcast the SSID, both OSs (Ubuntu + Windows) can use wireless network.
    But if I disable the broadcasting (to protect my router), the network driver cannot use my router, it does not matter I pre-set the SSID...
    A router is WRT54G, and it is working with other computers if I hide the SSID, but with SAT L300 Pro cannot connect (with this option).
    Do anybody knows why? What I need to do to I could hide the SSID from the bad guys?
    Thanks for any help!
    Regards:
    dd

    I dont know which Windows OS do you use but if you use original Vista, I think, right WLAN driver is part of the package. So WLAN card must be installed properly.
    It is not easy to say what is wrong there but if the notebook can see and detect your WLAN network on notebooks side everything must be OK. Try to restart your router and check all settings.
    In my opinion there is some problem with WLAN settings.

  • HP Color Laserjet PRO MFP M177FW Cannot connect to web services

    I bought a HP Color Laserjet PRO MFP M177FW  today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me. 
    This question was solved.
    View Solution.

    Hello rasitbolukcu,
    Welcome to the HP Support forums.  I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
    I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document.  It will walk you through ensuring the printer has the latest firmware.  Once you have updated the printer, please try to enable the web services again. 
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Clean Install - use MSI System Drivers?

    I have a question regarding a clean install.
    Install operating system -> MSI Chipset Drivers then update on top using ATI Catalyst 8.4?, Realtek Audio Drivers and finally Realtek PCI-E Lan Drivers.
    What is difference between the MSI Drivers and the Catalyst suite?  They same to be the same:
    Catalyst Control Centre
    ATI Install Manager
    North Bridge Filter Driver
    ATI Display Manager
    IDE Driver
    Microsoft Visual C++
    ATI Unified Stream Driver
    except the MSI Drivers adds Avivo64 Driver
    Also, I thought it was always best to unistall all ATI drivers before upgrading? - at least that is the concensus on the AMD forum.
    Any advice is appreciated.
    Vista x64 Premium
    Antec P182B Case
    MSI K9A2CF BIOS ver 1.5B1
    AMD Phenom 9500
    Thermaltake ToughPower 750w
    ATI Radeon 2900XT
    OCZ PC2-6400 800Mhz 2 x 1024
    Seagate 500GB 16MB cache SATA-2 HD
    Mitsumi 1.44 internal 3.5 floppy / 6 in 1 card reader
    Samsung 206BW

    I guess that's where I'm confused.
    It dosen't appear that the MSI system drivers are any different than the ATI catalyst drivers.  The only difference is that the MSI drivers wanted to install Avivo64 on my system.  Going to the ATI Catalyst site, it offers Avivo64 as a seperate download, but "Avivo Video Converter will only work with X1000 series products."   http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista64/common-vista64  I have a 2900XT.
    The Realtek audio and PCIe Ethernet drivers to install from the MSI site are in this case up to date and make sense.
    So to ask in a different way, is there a problem with:  OS first -> then the ATI Catalyst Suite (system drivers and display driver) - NOT install the MSI system drivers which appear to be outdated and the same as the ATI Catalyst Suite- then the Realtek Audio Driver, and finally the Realtek PCIe Ethernet driver.
    Thanks
    Vista x64 Premium
    Antec P182B Case
    MSI K9A2CF BIOS ver 1.5B1
    AMD Phenom 9500
    Thermaltake ToughPower 750w
    ATI Radeon 2900XT
    OCZ PC2-6400 800Mhz 2 x 1024
    Seagate 500GB 16MB cache SATA-2 HD
    Mitsumi 1.44 internal 3.5 floppy / 6 in 1 card reader
    Samsung 206BW

  • When I try to install an app it says cannot connect to itunes

    I'm trying to install an app but it keeps saying cannot connect to iTunes.It was working fine earlier but then it stopped.

    Hi Theresa,
    When troubleshooting iTunes Store connection issues, the following article provides the best information:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    If you haven't been able to connect to the iTunes Store:
    - Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
    - Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
    - Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet. 
    - Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
    - Try resetting (turning off and then on again) your Wi-Fi router
    - If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
    Thanks,
    Matt M.

  • TS3899 i installed the new iOS and cannot connect with 3g (it works with wifi only)!

    i have just installed iOS6 and it works only with WIFI, with 3G i cannot get mails nor connect with safari. anyone can help me? Thanks

    Hi Diesel Vdub, it says :cannot connect to data cell, or something like that.
    In settings i have enabled both Cellular data and 3G, bot not working yet! (I am in Argentina, i have called my carrier and says everything is ok for them!)
    thnaks again

  • After I install Acrobat Pro 9 i cannot open it or start it

    After I install Acrobat Pro (AcroPro90_efg) trial version i cannot open it or start it. I got an warning to uninstall en install again and i did but i circle around because the same warning comes back.
    How i have to solve this?
    Sjors

    Hello Anna,
    Thanks for trying to help. But my problem is not the installing. That works
    fine. But after the installing I got the problem it does not work. It says
    "Licensing for this product has stopped working"
    Met vriendelijke groet,
    Sjors R.M. Chamboné
    Rederij Loosdrecht
    Postbus 142, 1230 AC Loosdrecht
    Tel. 06-29 608 608 - Mail: [email protected]
    URL: www.RederijLoosdrecht.nl - RaboBank 13.21.41.272
    ‘t Stockpaerdt is nu een officiële trouwlocatie!!!

  • HT1689 Cannot install updates as get message Cannot connect to iTunes Store each time I try. Have updated to ios6 and can download

    Can anyone explain how I can install updates for the apps on my iPhone when I keep getting the message 'Cannot connect to iTunes Store', yet I can view music & films and still download new apps?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • Clean install macbook pro retina 13"

    I have just done what I thought was a clean install but the previous owner of the computer is still listed as a user. I need instructions for a clean install to set the computer up as mine. Any help would be appreciated.

    OS X Mavericks: Erase and reinstall OS X - Apple Support

Maybe you are looking for