Clean up after post office deletion

I deleted a post office from a GW 8.02 server running mta, gwia, and one other post office. When it asked me if I wanted to delete file system for that po, I said yes. However when it attempted to delete the files it gave an error saying they would have to be cleaned up manually. The objects deleted fine and the system is otherwise ok but when I run rcgrpwise status I still see the old post office listed there as unused. My assumption is that I need to clean up gwha.conf by removing the old post office from the list and then remove the file system for the old post office. Is that all there is to it?
Thanks for any assistance.
Dan

Hey Dan,
Originally Posted by dlietz
The hypervisor is esxi 5.1. I just built the groupwise server vm, so right now it just has SLES 11.3 on it - I was planning to go away from OES since Groupwise no longer uses eDir objects. My plan was to go with ext3 for the file system.
Sure, that's a valid reasoning and ext3 should work fine. One could probably debate using XFS over ext3 when looking at native Linux filesystems for GroupWise.
One thing I normally do set when using ext3, besides the notaime parameter, is the time dependent check. I usually set that to 12 months. It's very annoying (and time consuming) to have the disk check kick in during a planned reboot.
Originally Posted by dlietz
... What I've read so far seems to indicate I can copy the entire Groupwise system to the new VM and point the upgrade process to the domain and post office and it will upgrade it. Is that correct?
Yes, correct. It is important to make sure the basic agent configuration is in working order (meaning the http pages for the agents have been enabled and LDAP server configuration and eDirectory sync is all set correctly and in working order before doing the upgrade). Even when moving from eDir, it's nice to have the upgrade routine be able to reconfigure those LDAP and sync bits correctly for 2014 before moving to a new directory.
Originally Posted by dlietz
So I'm thinking:
1. Patch current Groupwise to 8.03
You could do, but I don't see the need. You'll be moving to the 2014 anyway... 8.03 does nothing extra for that upgrade process.
Originally Posted by dlietz
2. Upgrade Datasychronizer server from sles11sp2 to sles11sp3
3. Upgrade Datasychronizer software to Groupwise Mobility Server 2.0 (At this point I would have to reconnect to old post office?)
Sure, though I'd not 2.01 can be applied directly as upgrade on your current 1.x Mobility system. Do make sure you set a snapshot on the VM before the upgrade (with the VM tunred off) and leave it long enough, a week or so, until you have checked and double checked all is working on the 2.01 system. That way it's easy enough to roll back to 1.x if needed.
Originally Posted by dlietz
4. Copy Groupwise system to new server using db copy in multiple passes with a final pass when groupwise is offline and run upgrade process.
Yep, and if the current filesystem is NSS... make sure to run it with the migrate (-m) option so the lowercase conversion runs with it.
Originally Posted by dlietz
I was also considering separating Webaccess and Calendar Publishing to separate server since Webaccess is no longer part of the Groupwise server install.
Absolutely, and I'd also place that Webaccess/Calendar Publishing server in a DMZ if you have it. All that's needed with the 2012/2014 version is access to the SOAP port on the POA(s).
Cheers,
Willem

Similar Messages

The version of GroupWise you are using cannot access this post office

I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005

*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis

Post office reporting in Unknown State

We have Groupwise Monitor reporting one of our post offices in an
uknownstate. This message is not sent continuously but when we check the PO
it is running fine. This PO is being monitored remotely over T1, is there
anything we can do to correct. We have tried to set up the SMNP monitoring
for that PO only and cannot get it to work.

[email protected] wrote:
> This PO is being monitored remotely over T1
Was this PO added manually? I have found that agents I add manually will
always show unknown after a restart of Monitor, and if I delete them and
readd they start working again. If this is your issue, then there is a bug
already logged for this.
Danita Zanre
Novell Support Forums Volunteer
GroupWise 7 Upgrade Guide!
www.caledonia.net/gw7upg.html

Post.Office?

Hello all!
I have just upgraded from 10.3.9 to 10.5.1. Immediately after the upgrade, a new user account named Post.Office appeared.
Can anyone point me in the direction of what this account is, why it is there and how to use it? I can find no information in the documentation for Leopard or in these forums. I googled the term Post.Office and came up with this link:
http://www.tenon.com/products/post_office/
but that still doesn't answer the why of the matter.
Thanks for any help.
Ernie

It's not part of Leopard. Leopard upgrade just brings all of your existing accounts from an earlier OS. It's something you or another user on your machine created, probably years ago. Maybe it was a temporary account you set up to test their service and just forgot about?
Can't you just delete the account?

How-To "Refresh a table of data after inserting or deleting"

I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
Priit

Hi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks

Snipping Tool stopping working after installing Office 2013 Pro (32 bit) on Win 7 Pro 64bit - help?

Have been looking at many forums to fix this:
ran SFC - no errors
rebooted multiple times
all Windows Updates are current
don't want to disable antivirus, as some have suggested
Uploaded a registry fix, which several have suggested - no soap
Note:
all other features of this PC work great - zero issues.
the issue starting right after installing Office 2013 Pro - 32bit. It runs fine.
"Paint" runs fine. "Print Screen" works fine - image goes to clipboard, and I can paste anywhere.
get the standard message everyone posts in forums:
"The Snipping Tool is not working on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator."
Have tried other free third-party tools, and they are cumbersome, and I love the MS Snipping Tool.
Advice? Tips?
Thanks,
Dave
DavidLum

Hi,
Import this key back into the registry, log off and back on to check if it works.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\AppID\{7F429620-16D1-471E-A81A-114992148034}]
@="wisptis"
"RunAs"="Interactive User"
"LaunchPermission"=hex:01,00,14,80,64,00,00,00,74,00,00,00,14,00,00,00,30,00,\
00,00,02,00,1c,00,01,00,00,00,11,00,14,00,04,00,00,00,01,01,00,00,00,00,00,\
10,00,10,00,00,02,00,34,00,02,00,00,00,00,00,18,00,1f,00,00,00,01,02,00,00,\
00,00,00,05,20,00,00,00,20,02,00,00,00,00,14,00,0b,00,00,00,01,01,00,00,00,\
00,00,01,00,00,00,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,\
00,00,00,00,00,05,20,00,00,00,20,02,00,00
If problem persists, please refer to another thread discussion with this problem.
http://social.technet.microsoft.com/Forums/windows/en-US/610ecb85-9aea-472c-8590-b835a0982f68/snipping-tool-fails?forum=itprovistaapps
Roger Lu
TechNet Community Support

With Firefox 4 I can't print a shipping label off the post office's website (click 'n ship) like I used to with Firefox 3

I go through all the steps to print out a shipping label when I am on the post office's website for click 'n ship, but the website won't communicate with my printer (when I am in firefox 4). So I switched back to Firefox 3 and have no problems.
This happened before in the beta version and I had to switch back to Firefox 3, so I was happy to switch again to Firefox 4 when the completed version came out, but the problem came up again and after all the steps were done to complete the shipping label and I hit the print label button, my printer connection window never popped up so that I could click on it to command my printer to print the label. I am a registered user of click 'n ship on www.usps.com

After waiting forever to talk to some jerk at USPS Click and Ship help, he told me it's an Adobe issue. I didn't ask why it just started happening, but I too just updated to Foxfire 4 recently, it must have something to do with it.
Open your Adobe reader... under programs...mine is called Adobe Reader X
Go to "Edit" in top left...click "Properties"...
Uncheck "display PDF in browser",
Then restart your computer for it to take effect. I am so thankful it worked!

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Reduce/Expire on post office - advice needed

My organization has (had) an email retention policy of 30 days for
email and 365 days for appointments.
We have been on legal hold for the last 3 years so I am looking at
roughly that amount of data that will need to be removed when we get
the green light to come off of hold from the legal folks. (I'm told
that is coming soon)
My question is how does the expire/reduce run most efficiently? Should
I just set my 30/365 days settings and let it run or does it run more
effiently (quickly) if I did something like 365/720 then stepped down
to the 30/365, which would require 2 passes through the post office.
I know from observing the initial implementation of the policy, it is
going to take more than a week to get everthing down to size. Also, I
will probably have to run this stand alone so I can start/stop it as
needed. We can't take too much of performance hit if I just start it
from the server and let it run.
Once I get the post office trimmed down, I'll be re-enabling the
nightly scheduled expire/reduce options for maintenence.
Any advice or recommendations are appreciated.
Mark

Hi Andy -
Thanks for the input. My industry (without getting too specific)
makes the rules but does not need to follow them if you read through
the lines
I've had discussions about archiving until I'm blue in the face. I
would get more traction discussing it with my dog.
The size of the post office is roughly 500 user at 380GB. I'll have
to research the lenght of the full contents check that runs on the
weekend. I like the idea of the three runs.
On Tue, 04 Dec 2012 18:49:15 GMT, Andy Konecny
<[email protected]> wrote:
>In article <[email protected]>, Mark wrote:
>> My organization has (had) an email retention policy of 30 days for
>> email and 365 days for appointments.
>That's quite short and might get you in legal trouble. It might be very
>worth your while to investigate archival tools such as GWAVA's Retain.
>
>>
>> My question is how does the expire/reduce run most efficiently? Should
>> I just set my 30/365 days settings and let it run or does it run more
>> effiently (quickly) if I did something like 365/720 then stepped down
>> to the 30/365, which would require 2 passes through the post office.
>> I know from observing the initial implementation of the policy, it is
>> going to take more than a week to get everthing down to size. Also, I
>> will probably have to run this stand alone so I can start/stop it as
>> needed. We can't take too much of performance hit if I just start it
>> from the server and let it run.
>
>How long does a full Contents analyze/fix take? You'll be in about that
>time frame. What I would do is start with a pass on cleaning up just
>trash, then just the appointments, then the mail. How big is this
>PostOffice? (#Users & GB/TB?) How many CPUs? If virtual, adding some
>more for this reduction would help.
>
>Was that initial implementation done from a stand alone system or agent
>based? And what that on the current hardware config?
>
>
>Andy Konecny
>KonecnyConsulting.ca in Toronto
>----------------------------------------------------------------------
>Andy's Profile: http://forums.novell.com/member.php?userid=75037
>

Best practices for cleaning up after a Bulk REST API v2 export

I want to make sure that I am cleaning up after my exports (not leaving anything staging, etc). So far I am
DELETEing $ENTITY/exports/$ID and $ENTITY/exports/$ID/data as described in the Bulk REST API documentation
Using a dataRetentionDuration when I create an export (as a safety net in case my code crashes before deleting).
Is there anything else I should do? Should I/can I DELETE the syncs I create (syncs are not listed in the "Delete an Entity" section of the documentation)? Or are those automatically deleted when I DELETE an export?
Thanks!
1086203

Hi Chris,
I met the same problem as pod
It happens when I tried to load all historical activities, and one sample is same activityId was given to 2 different types (one is EmailOpen, the other is FormSubmit) that generated in year 2013
Before full loading, I ever did testing for my job, extracting the activity records from Nov 2014, and there is not unique ID issue
Seems Eloqua fixed this problem before Nov 2014, right?
So if I start to load Activity generated since 2015, there will not be PK problem, or else, I have to use ActivityId + ActivityType as compound PK for historical data
Please confirm and advise
Waiting for your feedback
Thanks~

Post office upset w/separate auto & non-auto postage reports for same job.

I am new to Business Objects Business Edition. I am not sure why sometimes I process an automated mailing and get one postage report showing both auto and non-auto, then run another and get two postage reports, one for auto and one for non-auto. The post office is always complaining that we shouldn't have two postage reports. Can anyone offer a suggestion?

Diane,
When the Postage Statement Type Option is set to "By Mailing" a separate Postage Statement will print for each scheme that qualified for the presort (or for each entry point in Business Edition). By Mailing is the program default.
In order to print one postage statement for the entire job, change the Postage Statement Type to By Job as follows:
1. Select Print > Reports
2. Highlight the Postage Statement
3. Click Options
4. Under Type, choose By Job
5. Click Create minimum number of pages (if it is not all ready checked)
6. To save as a default click Default
7. Click Save current settings as default
8. Click OK
9. Click OK
Note: When setting this as a default it will change this job and be the new global default for new jobs. After May 14, 2007 rate case, and using 7.80c or later, the Postage Statement may be on three pages, not just two even when doing a By Job Statement.
Diane - If you are usng Presort you can make the change to the report by opening up the postage statement block and setting the report to by job instead of by mailing.
Thanks,
Kendra
Edited by: Kendra Vangundy on Dec 10, 2008 3:36 PM

The Mac App Store keeps installing iMovie after i've deleted it. I assume it is due to auto updates.

The Mac App Store keeps installing iMovie after i've deleted it. I assume it is due to auto updates, but am not positive. Has anyone else expierenced this?
I know it was a clean install where I deleted all the support files as well.
(Running 10.9 on an intel i7 iMac.)

OS X Mavericks: Reinstall OS X Heres the link if anyone else had the same problem!! This is if you deleted not only the Mac App Store, but iTunes, Calendar, whatever came with the Mac (Apps that came already installed on the Mac), if you deleted one of those then you have to reinstall the Mac OS, Note: This one is for Mac OS X (Maverick) my version is 10.9.4, go to that link and follow the instructions if you have Mac OS X (Maverick). Other help: Common Mistake: If you delete the app from the dock then just go to finder and applications folder and drag the app back onto the dock(it was just deleted from the dock NOT your system/computer). Hope that helps others who had the same problem.

How do I download MUSE again after having accidentally deleted it

Hello!
I am in a dilemma. After having accidentally deleted MUSE from my computer (!!), I am now unable to download it again from CC. It says it is already updated, but that is no comfort in this situation. I need to download it. Is there any help to get?
HSPANHS

Thanks Marty!
Sorry, but I use the Mac.
The problem was solved. Adobe has a small piece of software. It deletes all rests of software pieces on the computer. Muse was gone, but evidentally not small files belonging to Muse. The program erased everything, and now CC thought (rightly so) thought I had not installe Muse and allowed me to do so!
Thanks for taking your time to write to me.
Best wishes,
Helge.
21 feb 2014 kl. 16:36 skrev marty11960 <[email protected]>:
Re: How do I download MUSE again after having accidentally deleted it
created by marty11960 in Creative Cloud Download & Install - View the full discussion
Hi HSPANHS,
Look into your controlpanel and see if muse is still there. If so, delete it.
Then you will be able to download it again.
Marty
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6143555#6143555
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6143555#6143555
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6143555#6143555. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creative Cloud Download & Install at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Groupwise 8.02 hp1 post office not startin

We have a problem after rebooting groupwise the post office agent is not starting. Is there something I can look at to trouble shoot why.
we are running on suse 10 sp2 oes 2 sp1
thanks!

On 9/12/2011 8:56 AM, bmcgehee wrote:
>
> We have a problem after rebooting groupwise the post office agent is not
> starting. Is there something I can look at to trouble shoot why.
> we are running on suse 10 sp2 oes 2 sp1
>
> thanks!
>
>
try running it manually
it's something like
cd /opt/novell/groupwise/agents/bin
su to root
../gwpoa @../share/yourstartupfile.poa
(You can also add -show to see a gui)

GroupWise 2012 Post Office crashes.

2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6

Originally Posted by ellisck
2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6
There are several known issues with crashing POA's. Make sure you'll be able to send a core dump and supportconfig to Novell, open an SR and they can provide you with an updated build in which the crashing should occur much less frequently.

Clean up after post office deletion

Similar Messages

Maybe you are looking for