Clear posted items

Hello,
we have a GL account where we start managing on an open item basis recently.
Our issue is; there are some postings made to this GL account before we manage on an open items basis and those postings have a 0 balance. Now when we try to clear them via transaction F-03 those postings do not come up in the open item list. Because at the time they were posted this GL was not valid for open item management.
But we can see them as open items when we view them via FBL3N. I found SAP note 438878 which seems relevant. But this is already implemented in our system.
Is there a way to clear them?
Thanks.

SAP suggest copying this program to Z* one. We had done it and it worked fine.
Regards
D.

Similar Messages

  • Post with Clearing: BAPI for clearing open items

    Hi,
    I'm looking for a way to use the logic of transaction F-30 (Post with Clearing) in an external application. I want to clear open items. Is there a BAPI or something else for it? While debugging transaction F-30 I found the function module POST_DOCUMENT together with function module FI_DOCUMENT_PROCESS which are used to actually clear the selected open items. But there is lot more coding around these function modules that might be needed/important. So, is there a BAPI that puts all together? Or what's the best way to do it at all?
    Regards,
    Robert

    Hi,
    BAPI_CR_ACC_GETOLDESTOPENITEM BAPI/BUS1010: Determine Oldest Open Item .... BAPI_AR_ACC_GETBALANCEDITEMS Customer account clearing transactions
    thanks
    abdul

  • Double booking when clear open item on G/L account

    HI!
    I use bank account 193200 as a clearing account to clear open items. I have made two postings on this account in different currencies. Now I wan't t o clear this items in f-03, and the difference of apprix 10 EUR is to be posted on an exchange rate difference account, 796201.  I have allocated this account to account 193300 in transaction OBY9 (account for echange rate difference) and I have also allocated this account in transaction OBXZ (create accounts for clearing differences)
    When I try to clear my twi items on account 193200 in transaction f-03 I get a posting looking like this:
    796201 Credit 10 EUR
    193200  Debet 10 EUR
    796201 Credit 10 EUR
    796201 Debet 10 EUR
    Why do I get this double posting on account 796201? It would be enough with a posting of the first two lines.
    Can anyone help?
    Many thanks in advance!

    Hi!
    Thanks for ypur reply! I checked the postings on profit centers now as you asked about it. All of the three P/L bookings (all the postings on account 796201) are on the same profit center and no bookings on profit center on account 193300.
    How can I go on? What did you mean by profit center posting in balance?

  • Clear/Open Item Symbol Green Check Mark

    SAP Gurus,
    I am running report FBL3N, for a clearing account, under clear/open item symbols instead of seeing a red dot or green dot, i see a check a mark. Does anyone knows what this green check mark means, and how can I clear the items?
    Your help will be greatly appreciated

    Venkat,
    Right now client has the accounts set-up as Line Item Display ( ALL OF TEH G/L ACCOUNTS), if I check open line item, when I save I get an error, saying there are errors. When I pull the long text to see the message of the error, it tells me,the message below. It apepars I have to create new accounts and then transfer the items to the new account is that true? or is there another way to fix this. I thought that by just checking the open item management option was sufficient.
    You cannot change the open item management setting; (see long text)
    Message no. FH087
    Diagnosis
    This account does not have a balance of zero.
    System Response
    You cannot switch the open item management specification on or off with this transaction.
    *Procedure*If you want to switch this function on retroactively for a certain account, you should create a new account with the correct setting and use this to make a transfer posting of existing items.
    If you want to switch off the open item management function retroactively for an account, you must first clear all the postings currently on this account. You cannot make any changes to the account management method until this is done.

  • FINSTA Bankstatement does not clear Open Items

    Dear SAP guru,
    I am experiencing an issue where FINSTA bankstatement generated in IHC module does not clear Open items in reciving company code. I would like to get the system to search for the document based on the original FI document number and clear it. The situation is
    The bank statement successfully processed has an original document number and processed.
    In IMG for EBS, I configure as algorism used is 20 - Document number search and Bank Posting type 4: Clear Debit GL account
    Clearing account -  and have the posting with relevant document number matched with the bankstatement.
    It seems that the system does not find the matching at all.
    Could any of you shed some light on what I am missing???
    Kind regards
    Taro

    Creating or even using something like a data migration account is the best way.
    Are you saying that you have a GL account with say 100 line items and you want them all cleared. If that is the case you wont need a LSMW, make sure you know the amount, and then create a journal posting to your new GL account, and select all items in the GL account you want to clear.
    If there are various GL accounts, again no real problem, in F-03 which is what you would be using, you can enter more than GL account so that should not be an issue.

  • Clearing open items - F-03

    Hello!
    How to clear open items when in tr FBL3N I see that some of the open items are  showed with status "Posted" green tick. To clear with tr. F-03 they should be in status open items - red mark. How could I turn posted items into open item status?
    With all the best,
    Merlin

    Hi
    In report FBL3N, you see a check mark.This means the Open Item Management CheckBox in that Clearing Account is not selected.
    Go to FS00 and view that clearing account and see the open item management in the control data tab.
    If the Open item management is selected then you will get red dot for open items and green dot for cleared items.
    For every Clearing Account Open item management check box will selected not for other G/L Accounts.
    If there is balance you cannot change the settings of the account.
    so create a new clearing account and transfer the balance , but here you cannot see the individual open items , you can see only balance transferred.
    If you want you have other option.DOWNLOAD the open items of the A/C to an excel file.Create a new Clearing A/C with open item management selected and UPLOAD the open items in the excel file to newly created account. you can use the program RFSEPA02 to do this but you take the help of an ABAPER.
    This will solve your problem
    Regards
    Venkat

  • EBS - Reference document number search for clearing open item

    Dear Experts,
    I am currently implementing EBS with MT 940 stattement for bank reconciliation.I want to clear open item, for out going cheque, during posting by reference field (XBLNR) where cheque number maintained.As per MT 940 statement this cheques number is mentioned in 86 line as follow
    :61:1102280228DR19961,NCHK682486          //51070
    :86:47558011XYZ ROAD
    But when I import bank statement, system recognise 682486 as reference field which is in 61 line and clears the open item.
    my requirement is for outgoing check system should recognise 86 line reference and other direct payment or inter bank transfer, system should consider  61 line reference.
    I have created different posting rule for Outgoing check and direct payment/Inter bank transfer.
    I tried to find such issue in forum but did not found any help.
    If need to use search string then how to configure for this and what algorithm to be used for the same.
    looking for solution
    Regards
    Sanjay D

    Hi,
    If you are talking about line item level, then it is called Allocation Number. At the header level, it is called Reference number.
    This is controlled using the copy control for billing - at the header level control.
    The reference number & allocation number once maintained in the configuration, will show up in the Accounting doc - header level & item level, respectively.
    For example - if the customer payment always refers to his PO number, then it really helps to use the allocation number for the accounting doc line items - which helps in clearing incoming payment faster. In this case, the reference number could be our delivery number. This is one of the examples for using both Ref & allocation #'s.
    Hope, this helps!
    S. Siva

  • Another modif  tcode clearing open item from MM without use F-51

    all Guru ,
    Please help. Is there any way for another new modif  tcode clearing open item from MM without use F-51. So i can use copy transparent from main table MM, for item like plant, vendor, material,price, oty, plus add new field for calculation method in order to post this result formula through FI posting without F-51 but also can clear open item dan clearing line item ? or only can clear open item ? ...it's oke. For line item can be done maybe can be run with F-03 ir F13E
    I am trying to observe table BSIK (open item) and relation with BSAK(clear item)...is it right way ?
    Case :
    i want to clear open item for GL account inv.of.promises from transaction MM, with jurnal :
    inv.of prom (Db)
             Inventory (Cr)
    Then this inv.of prom must be calculated again with raise price. And then this cummulate in the of month.
    After that we want to clear with posting FI by searching any open item for that GL with jurnal :
           Other receiv.(Db)
           Accrued exp (Db)
                      Inv.of.prom (Cr)

    Hi PK,
    1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
    - Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
    2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
    You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
    3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
    OIM activation for a GL - Refer Note No.1356457.
    OIM Deactivation :  You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
    4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
    J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
    Hope this helps you.
    Regards,
    SAPFICO

  • Settings for Automatic clearing open item in BRS

    Hi Gurus,
    When i am running automatic brs clearing,for this any settings is there for clearing open item automatically.
    Pls very urgent.
    Raju.

    Dear Raj,
    Bank clearing accounts is used to for Bank Reconciliation purpose . If you like to automate this process you have to configure Electronic Bank Statement process. You can check the below links
    http://wiki.sdn.sap.com/wiki/display/ERPFI/ElectronicBankStatement
    http://www.sap-img.com/financial/customizing-an-electronic-bank-reconciliation-statement.htm
    Note: There are so many posts with regards to Electronic Bank Statement process, you can search from the forum also.
    Thanks and regards
    Praveen.J

  • Clearing customer Items with Special G/L Indicator 'A' (down payment)

    Hi All,
    I've to clear two items of a customer by t.code F-32:
    Both items, that I dysplays by t.code FBL5N (u20AC 20.000,00 and - 20.000,00), are with Special G/L Indicator 'A' (down payment).
    Only the first one contains a 'tax amount' equal to 4.000,00.
    When I process the open Items of the customer by t.code F-32, I expect to see the two items as follows
    20.000,00
    - 20.000,00
    Instead, SAP displays as follows
    24.000,00
    - 20.000,00
    So, I can't clear them as 24.000,00 is not equal to 20.000,00
    Could anyone tell me ho to solve?
    Thanks

    Hi Maurizio,
    first of all, thanks for your answer.
    I've checked the tax category in the G/L account master data of the special G/L
    account used for down payments (A). Tax category is equal to '+ '.
    According to this setting, I posted a customer credit memo as follow:
    Item 01; posting key 11; Customer account XXX; Amount 24.000,00
    Item 02; posting key 09; Customer account XXX; Special G/L Indicator A; Amount 20.000,00 (tax code 20%)
    Item 03; posting key 40; Debit tax account; Amount 20.000,00 (tax code 20%)
    Now I've to clear the item 02 of that credit memo. When I try to do it by t.code F-32, SAP displays the amount 24.000,00 (with tax amount) and not 20.000,00.
    Clearing that item, the system create a automatic posting for tax account of 4000,00.
    This is my issue: SAP shouldn't create this posting for tax account.
    Thank again.
    G.

  • Already Cleared Customer Items on Incoming Bank Statement

    Please advise on how to treat the below:
    1. A Customer Invoice is Cleared by a Cash Payment at the Cash desk.
    This CR- Customer and DR- Bank Clearing Account.
    2. The money comes in on the Electronic Bank Statement on a Business
    Transaction Code (BTC) that is used for all incoming Cash payments and
    that is set up to post to Posting Area 1 (GL Accounting) and also to FI-CA (Subledger Accounting).
    This is because the BTC can be used also for cash payments at the Bank
    counter and which needs to clear Open Items on the Customer when it
    comes in on the Bank Statement.
    This will correctly post DR- Bank Cleared Cash and CR- Bank Clearing
    Account
    Question: How do I treat the sub-ledger posting for the BTC FI-CA. This
    is because there will be no open item to clear on the customer as it
    has been cleared in a previous step at the cash desk and even though
    the posting will go into Clarification, it will post CR- Clarification,
    DR- Bank Clearing Account which means a doubled DR to the Bank Clearing
    Account in addition to the earlier Dr from the Cash desk posting.
    Look forward to your urgent reply.
    Regards,

    Why post to the clearing account? You can directly post to the customer account.
    Debit Bank
    Credit customer
    For this you have to create a posting rule which will be linked to the external code (BAI code if you are getting the bank statement in BAI format) and the posting rule should have 'standard algorithm' assigned to it.
    Then while uploading the bank statement you have to give the range of customer invoice numbers against BELNR or XBELNR. The system will automatically identify the customer based on the invoice number on Record type 16 appearing in Bank statement and clear the open item and generate the above accounting entry.
    For a detailed description of how the EBS works, please see the thread titled EBS posted by Sheena Mehta and answered by me.

  • BAPI _ACC_DOCUMENT_POST for clearing open items

    Hi,
    I am using BAPI_ACC_DOCUMENT_POST for clearing open items.
    When i post the same in F.13 (automatic clearance ) there is no error log,when i do in BAPI_ACC_DOCUMENT_POST
    its returns two errors.
    609 Error in document: IDOC 010000008410012009 CKDCLNT140
    702 Balance in transaction currency
    Header details are given as per certain sdn suggestions.
    note: i have changed the G/L account as automatic account (if i am using original G/L account its throwing an error msg
    such as direct posting not possible).
    Can any one help to get through this??
    Edited by: sangeearvind on Dec 16, 2009 12:24 PM

    Hi
    The first problem is you're using the wrong BAPI: BAPI ACCDOCUMENT_POST is to post account document, not to clear open item.
    I don't think there's a BAPI to do it
    Max

  • Can BAPI_ACC_DOCUMENT_POST Clear open items similar to F-28 FB05

    Can BAPI_ACC_DOCUMENT_POST be used to clear open items?  I've been able to successfully post documents using this BAPI, but it is not clearing the open item document.  Any ideas?

    Hi,
    No, It cannot be used to clear open items.  I think BDC Recording of F-28 will be solution for clearing open line items.
    Regards
    Vinod

  • GRIR Clearing (old items)

    Dear all,
    could someone make a suggestion on how to clear open items on the GRIR account that are over 6 months old. MR11 is run on a monthly basis, yet I have some open items in my reconciliation dating back until 2003. I would like to get rid of them but are not able to make manual postings on the GRIR account.
    Sincerely,
    Lucas

    Hi,
    It is not recommended to post manually on GR IR account.
    You should try to clear this difference with MR11, it is possible to clear old items with the current date.
    Rgrds,
    Miroslav

  • Clear customer items w. special G/L ind. A ; VAT - relating

    Dear all,
    I have below issue:
    When I post incoming payment, clear customer item with Special G/L Ind. A, the system posts a document which have the same VAT used in the original special G/L customer item, but this VAT doesn't have to be posted in the payment even if percentage = 0.
    Company is in Italy.
    I would obliged any of your comments.
    Rgds,
    Linh

    Hi,
    I guess it's logic that the system copied the same fields (including VAT) from the customer item to the 2nd item created automatically when clearing.
    Regards.

Maybe you are looking for