Clear signature but do not unlock previously locked fields

I have designed a form in LiveCycle ES 8.2.1 in which certain fields are locked when a check box is checked. They should remain locked. However, when a first digital signature is inserted and the user clears the signature. previously locked fields get unlocked. These fields must always stay locked.  Does anyone have a solution for this?
Thanks!

I have added the code in Employee Signature field Change event to check the signature status and lock fields if the checkbox is checked . But it is not working.
The requirement is that if the check box is checked, all the fields above that must be locked whether signature is valid or cleared.
This is the first form I have designed in LiveCycle. So I would appreciate any help in this matter.
Thanks,
swat_mpg
1. This is the code
form1.SubformMain.SubformText.SubformSignatures.EmployeeSignature::change - (JavaScript, client)
var digSig = event.target.getField(GetFQSOMExp(this)); 
var status = digSig.signatureValidate(); 
app.alert(status);
switch (status){
case 0:
case 1:
case 2: 
if ( form1.SubformMain.SubformText.chkAppraisalComplete === 1){
xfa.host.messageBox("Signature status is:- "
& status)form1.SubformMain.SubformName.txtfLast.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformName.txtfFirst.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformName.txtfInitial.access
= this.rawValue?"readOnly":"open"; 
form1.SubformMain.SubformGeneral.txtfDivision.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformGeneral.txtfPosition.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformGeneral.txtfTimeInPosition.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformGeneral.txtfTimeWithSupervisor.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformGeneral.txtfSupervisor.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformGeneral.DateFrom.access
= this.rawValue?"readOnly":"open";form1.SubformMain.SubformGeneral.DateTo.access
= this.rawValue?"readOnly":"open";
txtfA.access
= this.rawValue?"readOnly":"open";txtfB.access
= this.rawValue?"readOnly":"open";txtfC.access
= this.rawValue?"readOnly":"open";txtfD.access
= this.rawValue?"readOnly":"open";txtfE.access
= this.rawValue?"readOnly":"open"; 
form1.SubformMain.SubformText.chkAppraisalComplete.access
= this.rawValue?"readOnly":"open";}
break; 
2. Image of the Partial form

Similar Messages

  • Want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

    want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

    Type '''about:preferences#applications'''<enter> in the address bar.
    Now follow the picture.

  • IPad calling for iCloud backup but will not unlock so i can connect to wifi ... help

    iPad calling for iCloud backup but will not unlock so i can connect to wifi ... help

    thank you for replying:)
    but i tried all of the tips in the link and it still didn't work, does anyone else have any ideas?
    and just to add another issue, i went under General>About>WiFi Address and there is one and i still cannot access the internet.
    Message was edited by: kailey65

  • Field ZZBUDAT is delta-relevant, but does not exist in the field list

    Hi All,
    I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
    So i have enhanced the datasource now that date is coming in my datasource.
    But when i tried to make delta on that date field its showing error-
    Field ZZBUDAT is delta-relevant, but does not exist in the field list
    Message no. R8279
    Diagnosis
    The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
    Now how i can make this field dalta relevant?
    Thanks,
    Piyush

    Piyush,
    I think the message in SAP is quite clear....
    If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
    The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
    Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
    The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

  • Preview inserts signature but will not let me drag it or resize it

    I am running the latest version o Mac Preview on an iMac running Yosemite 10.10.2
    In some PDF's the signature insert works fine. In others, randomly occurring, I can insert a signature but it only goes to the middle of the page. I cannot resize the signature or drag it to my desired location after I insert it. I have opened and closed preview many times and also tried duplicating the PDF and opening it again with the same problems.
    Today, a PDF created from a web document allowed me to drag and re-size, but a PDF created from a Pages document did not. I really need a solution to this as printing duplicates of signed documents saves me a lot of time, so thanks in advance.

    I could see the images in Aperture.
    Susan, what do you see in Aperture's Viewer? Does the image look o.k.? Then you have at least good quality previews, that you could save.
    Create a new folder on your Desktop, select all recently imported images in the browser, and drag the images from Aperture's Browser window to that folder on your Desktop. That will save the Preview images as jpegs.
    You will not be able to restore the originals from the card, if it already has been formatted, unless you have set Aperture to backup directly on import.
    If you ctrl-click your Aperture library and select "Show Library Contents", then open the "Masters" folder - do you see any image files in the most recently added folder for "2013 > February > 4 (the day you imported)"?
    Regards
    Léonie

  • Phone locks when placing phone near ear but does not unlock afterwards

    I am experiencing a screen lock problem when making calls. After I initiate or receive a call and place my phone near my ear to talk, the screen goes black as in lock mode. Once i am done talking and I want to end the call, I move my phone away from my ear and put it in front of me to press the "end call button", but the screen keeps itself in lock mode. Sometimes i get lucky if a move the phone a lot to get the screen to show up again but most of the times i see myself having to press the lock button various times along with the menu button or just wait for the party to end the call and unlock it again. Is this happening to anyone else?

    This issue is something I am encountering as well. I will assume it has something to do with the current OS version and believe it will be addressed in 2.0.1 upon its release. I also know that by taping the power button the phone is sent into lock mode, but it appears no one hear is using a case so that is likely not the issue.
    I have also got the phone to do this while using the SMS feature. It happened following the sending process of several SMS messages.
    I'll contact Apple today and post a full recount of the conversation at some point today.

  • HT1212 myiphone is locked because of mutiple trys with old passwords i think ive followed the direction but have not unlocked my phone thru itunes any suggestions

    If the Iphone is locked how do you erase it and start over like it is a new devise?

    Try the troubleshooting from the link below. See if it helps
    http://osxdaily.com/2011/01/16/forgot-iphone-passcode-how-to-reset/

  • Nokia 5800 - Keyguard will not unlock or lock

    I've had this phone for about a year,it's been working great until recently,the screen has been flashing bars on screen,though I managed to fix it by charging for over two nights,but now,my Keyguard is not locking or unlocking,it worked fine before the flashing bars on screen.
    Could someone please help me ?
    Thanks - Chris

    hard reset it.
    call *#7370# or boot up while holding green calll, red call button, camera key and of course the boot up button.

  • IPhone 5 lock button works but can't unlock or lock

    My lock button works as I can turn my iPhone on with it, but it doesn't work when I try to lock or unlock with it. Tried restarting a few times and resetting, but none of them works. Any suggestions what I should do?
    Thanks!

    Restore the phone, first from backup.  If that doesn't solve the issue, restore as NEW device without using any backup at all.  If the problem still persists, you likely have a hardware issue and will need to go to Apple to have the phone evaluated.

  • Selecting e-mail group in Address Book opens new mail, but does not fill out "TO" field. Solution? Bug?

    Does anyone else have the same issue?

    So far, FWIW all I've got is individual AddToAddressBook, then in AB itself, drag and drop one by one from the main list into the desired group.

  • Adobe Acrobat Version 9.0 & X are not showing "Clear Signature Field" with Custom e-sign plug-in

    Hi...
    We have created Custom PDF signature plug-in using Adobe X SDK.
    Earlier we had the same Custom PDF signature plug-in with Adobe 7.0 SDK and it used to show "Clear Signature Field" in context menu of digital signature placed on PDF.
    After upgrading the Custom signature plug-in to Adobe X SDK (complied again with SDK X, earlier it used to be 5.0 SDK) to support Acrobat 9, X and XI for digital signature, the "Clear Signature Field" option is appearing in context menu of digital signature box. Even the "Clear Signature Field" option is not shown for the user who has signed the document.
    "Clear Signature" option is available for Adobe Default Security signature.
    We have not changed anything in our plug-in code apart from recompiling it with Adobe X SDK.
    This is a critical issue for us.
    Here is the screen-shot from signed PDF having Adobe Default signature as well as our Custom plug-in signature.
    Here it clearly shows that "Clear Signature" option is not present in signature placed by Custom plug-in.
    Please let us know if anyone else has faced this type of issue earlier and has a resolution.
    Thanks In Advance...
    Waseem

    I am still not getting the Clear signature option for the user who has signed the PDF using Custom PDF Signature plug-in but the same is available for Acrobat Default security signature.
    Custom plug-in is compliled with Adobe X SDK and we have not made any code change to hide the Clear Signature option.
    I found a related posts where Clear Signature option is not shown:
    http://forums.adobe.com/message/5092195

  • How to clear signature in acrobat pro dc

    I want to clear a signature on a DC document form that I created. I used to be able to do so by right-clicking the signature field and choose "Clear Signature" but that option is not available.

    Hello Pete,
    The "Clear Signature" option is available in Acrobat Pro DC as it was in Acrobat XI Pro.
    You can clear a signature if you are the signer, that is, if the digital ID with which you did the signing is available to Acrobat.
    I can think of two reasons that "Clear signature" might not be available:
    1. Your digital ID is not available to Acrobat Pro DC. That is, you have not yet imported it for use in Acrobat or don't have your smart card in the reader, etc.
    2. When you signed the PDF, you chose the option to "Lock Document After Signing".
    Regards,
    Charlene

  • Able to clear signatures in a certified document in Acrobat 9.0

    Hi
    While testing Acrobat 9.0 feasibility for migrating my application from Acrobat 7.0, I stumbled upon a security issue that the signatures can be cleared in a certified document (Only Form Fill in and digital signatures are allowed) by right clicking and selecting Clear
    Signature. After clearing the signature, the document status still remains valid i.e. it doesn't gets invalid even if the signature is cleared. Below are the steps to reproduce the same.
    1. Certify a document having couple of signature fields by selecting Certify with Visible Signature and
    i "Form fill-in and digital signatures"
    as the Permitted Actions after Certifying.
    2. Close and re-open the document.
    3. Sign a signature field.
    4. Close and re-open the document. Right click on the signed signature field and select Clear Signature.
    5. Save the document, close and re-open the same. The signature is cleared
    and the document status is valid.
    This behavior is different from Acrobat 7.0 where
    A) User is unable to clear a signature in a certified document
    B) Even if he somehows clears the signature, the document certification becomes invalid.
    Also, if you right click on the certifying signature in Step 4 above, it also can get cleared.
    This behavior of clearing the signatures in a certified document nullifies the purpose of a certified document to prevent users from changing a document. Also, the option of locking the signature during the certification process is missing in Acrobat 9.
    Please let me know whether this is a bug or expected behavior.

    Below is the example of difference in behavior of Acrobat 7 and 9.
    In case of Acrobat 7, there was no option to clear a signature field in a "certified" document i.e. if I sign and right click on a signature field inside a certified document Acrobat 7.0, the Clear Signature option is not present.
    However, if I sign the same signature field in the same PDF in Acrobat 9 and right click, Clear Signature option is available and am able to Clear the signature.

  • HT1430 my iphone 4 will not unlock

    My iphone 4 will not unlock. It switches on, accepts the code then says 'unlocking please wait' but does not unlock.

    Try a reset. Hold Sleep/Wake button and Home button down until Apple logo appears. No date will be lost.

  • Does not save changes if do not tab to another field

    Hi all,
    I have created a simple text book Business Component Data form based on one table (using wizzards). Everything looks good UNTIL :
    at runtime if I change a value to a field but do not navigate to another field (tab or click) it does not take my changes into account (even the arrow in the tool bar 'Save changes to the database' becomes enabled only until I click out of the field).
    Any ideas?
    How can I programatically force the tab or click (I tried validate triggers, mouse exit etc..)
    PS : I am using JDev3.1
    Thanks

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sathish Kumar:
    |How can I programatically force the tab or |click (I tried validate triggers, mouse exit |etc..)
    If you registered a mouse listener with the control, you can set the value of the
    attribute by,
    ImmediateAccess ia =
    (ImmediateAccess)myControl.getDataItem();
    ia.setValue(newValue);
    <HR></BLOCKQUOTE>
    Thanks for the answer but I tried it and it does not compile the ImmediateAccess stuff (do I need to import a class to get this feature working).
    Thanks
    PS : I am a newby in Java....
    null

Maybe you are looking for

  • Search and replacing a url...

    I just ran across an issue last night, my hyperlinks added a space at the end of the url. Does anyone know how to do a search and replace for the hyperlink window? I ended up editing every one of them. It probably wouldn't be so bad but that is a lot

  • Update 10.0 keeps popping up, by will not download on my MacBook Pro--suggestions?

    It says downloading Firefox, Connecting to the update server....but nothing happens no matter how long I leave it open.

  • Auto Lenses Hiccup?

    I'm currently running 6.1 because I wanted to have the ability to apply lense correction in camera raw. I've gone through a number of images with both of my Nikon D3's where I click the enable lense correction button and then have to choose the drop

  • Tiger to Snow Leopard for my '06 iMac Intel duo

    I've read that my iMac will run up to 10.6.8 but not beyond, once there it cannot boot in 64 bit mode nor does it support Open CL, what does that mean?

  • Installing a Cintiq 12wx on an iMac...

    I got a DVI adaptor cable but it looks like I need a DVI-I which I can't find at the apple store. Is this right? And where do I find this DVI-I adaptor? Cintiq really needs to update their manual to aknowledge the existence of iMacs.