Click produces menus instead of desired action.  Menu can be cleared using esc key, but additional clicks produce more menus until I hit the lucky click that yields the desired action.

Magic mouse & trackpad "clicks" produce menus instead of desired actions. Menus can be cleared using esc key, but additional clicks usually produce menus until I hit the magic click that initiates the desired action.  How can I deactivate the menus that appear?

Sounds like your left click is set to right click. Read this: http://magicmousehelp.com/change-primary-click-magic-mouse/

Similar Messages

  • Action menu background is clear.

    Hello,
    Someone using one of my applications sent a screenshot of the Actions menu of a Interactive Report. The background of the menu that drops down is clear (no background color) so you can see the report through it. They are using IE.
    Has anyone seen this or have any suggestions on how to make the background white? I can't replicate it in FF or IE.
    The theme is Builder Blue.
    thanks,
    Matt

    Previously reported: +{thread:id=1095764}+.
    No resolution mentioned yet, but switching to another theme may be a possible workaround.

  • In Firefox 4 the dropdown menu next to the forward button in the Navigation Toolbar that allowed the user to select another page in the history to go back to is gone. Why?

    In Firefox 3, the user could access a dropdown menu by hovering over a small black arrow next to the forward arrow in the Navigation Toolbar. This allowed the user to go to earlier pages in the browser history, rather than using the back button to go to the immediate previous page.
    After updating to Firefox 4, this menu disappeared. Was it moved? Was it removed?
    I found this feature to be very useful. Why was it changed?
    Nick

    There are two ways to get this: (1) Hold the back button until the menu appears (2) Right click the back button. See the screenshot below for reference.

  • Can't access title inspector. I can only see the left half that lists the names of all the settings but cannot see or adjust any of the settings like font size or color. I can click on a triangle and expand a setting but can't see setting or change it.

    This screen grab actually cuts off the right side a little bit but this is basically my issue. I can move the whole window but I still can't see or access the parameters for each of the title settings. Is this just a bug I have to live with until Apple fixes it or does anyone have a solution?

    I'm on a MacBook Pro with a 15.4" screen. Resolution = 1024x768 (stretched).
    I've tried moving the window but it cuts off the inspector in the same place and I am unable to resize the width of the window.

  • Action not displaying in the Action menu.

    Hi All,
                   I have configure one action demotion & added it the Action menu.All the configuration I have done is in similar line with the existing action types.But this action is not displaying the action menu.Can anybody help me to resolve the issue.
    Thanks,
    Snita

    My user group is 60
    I have configured like this-
    User group dependency on menus-
    Menu   Text         User-dep.   Reaction  ref.
    17       Demotion   blank          00
    For infogroup
    User group    Infogroup modfi..  N   operation  Infotype
    00                   Blank            01      COP      0001
    00                   Blank            01      COP      0008
    00                   Blank            01      COP      0014
    00                   Blank            01      COP      0015
    A.Ty N.Action  F Cus. E  Sp.C  Check   P  P..E E..                 IG    U  U
    17    Demotion 0         3                       Check box for All the 4 17    2Check box for U U
    Then I have include this action in action menu.
    But it is still not displaying in the action menu.
    Snita

  • I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'

    '''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''

    If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • Can Actions Menu of Interactive Reports work with Custom Authentication?

    My testing is leading my to believe that Actions Menu do not work with Custom Authentication (but only work with APEX Authentication) in APEX 3.1.2? If that's true then is there a work around to this?
    Just to clarify, I've posted/asked this question twice before:
    1) Re: Actions Menu in Interactive Reports does not sort, filter, select cols etc
    2) Interactive Report actions don't work for users (i.e. for non-developers)
    But I've come to believe this is the main problem. I just don't know how to resolve/work around this?
    Thanks for any help.

    I haven't setup a sample because my custom authentication is using LDAP authentication. I'm not sure how I can replicate that on the samples server?
    I'm using LDAP authentication with a Page Sentry function. My further testing reveals that the Page Sentry function is setting the APEX variable user to NULL (ie blank) whenever there's any code in the Page Sentry function box. PL/SQL code as simple as
    BEGIN return TRUE; END;
    in the Page Sentry function box sets the "user" is set to <null>. When the Page sentry function box is left empty (no code specified) it sets the "user" properly after authentication against the specified LDAP directory.
    What all this has to do with Interactive Reports...
    It seems like when the user is NULL it messes-up Interactive Reports that are stored in the flows database. Although it shows the default report properly, but no runtime interactive actions (filtering, sorting, column break, etc.) work.
    Can someone please correct or confirm this?
    Thanks.

  • Need to locate the Finder's cog wheel (action menu).  It's not there! Would someone please help me?  Trying to uninstall MacKeeper.  Thanks.

    Need to find the Finder's cog wheel (action menu).  It's not there!   Would someone please help me?  Trying to uninstall MacKeeper.  Thanks.

    anne296 wrote:
    Need to find the Finder's cog wheel (action menu).  It's not there!   Would someone please help me?  Trying to uninstall MacKeeper.  Thanks.
    The action menu can be restored by, in the Finder, selecting under View menu "Customize Toolbar ...". There you will see options to put the action menu (wheel) back on your toolbar.

  • I have graphical errors on the browser edges when i use the right click menu and close out tabs.

    Ok I will try to explain this the best way I can as I'm not sure what to call it. But simply put, if I have FF4 open, sometimes I get a graphical glitch on the edge of the window. It seems to always occur when I right click near the edge of the browser window, then close out that current tab. A small part of the context menu remains on the screen. Here is a screenshot:
    [http://img.photobucket.com/albums/v475/JunkHead/fireglitch.jpg]
    notice the section in the lower right hand part of the browser. That's the leftover context menu in the edge of the window. There is also a section on the bottom of the browser as well. I didn't plan on that one, and have no idea why it is there. I had no menu open there. Anyone every see this before?

    You can also use ctrl-T or File > New tab (if you have the menubar showing). I can't find an extension that will help you bring back the previous behavior but there probably will be one soon.

  • How do I get a computer to use one of my available licenses instead of the temporary license that I'm being told will expire tomorrow?

    My console says "Payment needed" on one of my computers, and that the computer is currently using a temporary license, which is set to expire tomorrow. However, the line above that says the I have 2 device licenses available for activation. How do I get that computer to use one of my available licenses instead of the temporary license that will expire tomorrow?
    Thanks,
    RS

    andtrobs wrote:
    Something I have noticed with the iPad that it is possible for webpages to run as if they are in their own app.
    No, what you're seeing is the actual webpage
    For example, the BBC iplayer (www.bbc.co.uk/iplayer). Open this site in safari, add an icon for it to your home screen, then when you use this icon to open the iplayer it opens as if it is an app, it doesn't have the address bar or back and forward buttons etc.
    Actually, it does. Or should do, ay least. It does for me
    Also when you double click the home button the iplayer icon shows up with the rest of the apps (usually you just get safari there) and if you open safari and look at the pages you have open it doesn't show there. It really does look as though it is an app, although what I'm guessing is happening is that it is open in a new instance of safari.
    That's correct
    My question is, does anyone know how to get a site to do this? I'm assuming there are some meta tags in the HTML but I can't find any references to this being possible let alone how to do it.
    The site doesn't do it. Safari does it. All you have on your Home screen is the iPad equivalent of a webloc, a small text snippet containing the URL for whatever page you saved.
    Message was edited by: Michael Morgan1

  • DW CS4 Spry menu shows up on one page layout, but not in a secondary page

    I inserted a spry menu into the homepage. Got it working okay. Then I inserted one into another page layout within the site. Copied and replaced the code with that from the homepage. The secondary page dropdowns aren't dropping down. What am I missing? Help please.
    Homepage
    Secondary page

    Open your Homepage and SaveAs Secondary page.  Edit content as desired.  Save again.
    See also, Dreamweaver Templates in DW Help (F1).
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • New comer ask 2 simple questions:how to set the use of the right click of

    New comer ask 2 simple questions:how to set the use of the right click of your mouse?
    I don't know why when i click the right button of my mouse in logic, sometimes it's the same funcion as my left one, some times it's the same function that opens the tool menu....But in MacOSX,it's all okay.Just the weired thing in logic ,please help
    2.is there any kind of filter in Score? I mean, in midi track I have a C1 note, and I don't want the C1 note shown in my score, I want every note show which are above C2, like a filter. I think this is helpful dealling with some keyswich things,how can we do that?

    In Preferences -> Global -> Editing you can choose weather right click is assignable or opens the tools box.
    Not to sure about the score dude

  • How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

    How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

    Hello,
                  Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
                  Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
    Thank you,
    Best regards,
    paio

  • Is there a way to place a button on the front panel that when clicked gives a pop up dialog box with more info in it?

    Hi Everyone,
     The simulations that I am creating are very simple themselves but are intended for use in a classroom setting to help students learn more about the theory being demonstrated.  I am hoping to be able to place a "Help" or "more info" button on the front panel so that if a student wants more info about the theory they can click on it and a pop up appears with background info on it.  It should also have a second button to close it and return to the main front panel again.  Can anyone lead me in the right direction?
    Thank you!
    Solved!
    Go to Solution.

    Use an event structure on the main vi that when the button is clicked, launches a "Help" sub vi. Inside the sub vi (with the properties set to load front panel when called of course), use another event structure to wait for the button of the subVI to be clicked so you can return to the main VI. Do you need help with using event structures?
    Charles
    Charles Chickering
    Architecture is art with rules.
    ...and the rules are more like guidelines

  • I did something so that when I am on fb on this comp., I can't see anyones pics, or my own. I saw something pop up with the option to undo, but didnt get to it in time. I was right clicking on photos trying to copy and paste. Any one know what I did?

    When i right clicked on pic, an option was there .I can not remember what it said except something like "Block fb"

    You can use these steps to check if images are blocked:
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions" (e.g. sphotos.ak.fbcdn.net)
    *Open the web page that has the images missing in a browser tab.
    *Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    *Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down through the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Maybe you are looking for

  • AE cuts the end of a time remapped footage.

    Probably a silly question but hey: I have a footage shot at 18fps and want to slow it down to 25 fps. I use the stretch tool (AE CS6) and when I render it it is slowed down alright but the end of the footage is cut to the same time as the original on

  • Non-sequential enum causes error

    When calling a .NET object that has a property that sets an enum value, I am getting a runtime error in the .NET code if the enum is defined such that each value is not a sequential number (as in a bit mask). If the values are sequential there is no

  • Finding sum inside Loop

    Hi Experts, here i am printing report output. in my internal tab there are 10 fields, inthat last field is CURRENCY (amt). now i want to sum that field at end of first field. my pease of code is below: LOOP AT it_display INTO wa_display.     IF wa_di

  • Editing a BlackMagic AVi file

    I have Premiere Elements 10.  A service is offering to convert 8mm film to a Blackmagic Avi file.  I have no Blackmagic hardware.  I have Win 7 64bit. Will PE10 read this file in so I may edit the file.  Do i need to obtain any new codecs, and if so,

  • How do I start over with Inventory

    We're running Zfd 4.0.1 and using Sybase on NW6. My question is this: I want to simply get rid of all inventory data and start recollecting inventory data from scratch. How can I do this? Thanks. -Marc Johnson