Client copy without tranasactional data

Hi
We are performing a local client copy from client 321 to 330. We need only Master data and Customizing but not Transactional data. Do we need to use the profile SAP_UCUS?? or any other profile?
Thanks
Minhaj

Hi Ruchit,
Thanks for the quick response again.
As said only users will be moved from master data not all other data. What data will be left behind and whats the process of migrating it?
Thanks in advance
Minhaj

Similar Messages

Client Copy "only" Master data

Hi,
How can i copy only master data from a client ?
Thank's

Hello Eduardo,
Client copy of master data alone maynot possible. I mean even if you use SAP_APPL even then transactional data will also get migrated. So I would suggest of sending the data through ALE (idocs).
We do it on large scale regularily.
But still please wait for opinion from others. May be they might have a better solution.
Regards.
Ruchit Khushu.

Client copy without Org structure

Greetings-
We have recently performed client copies. We used the setting SAP_CUST (customizing only). However, we have discovered that this ended up transporting all of our Org/PD tables. We create org/pd independently in each client, and have auto transport of PD turned off (t77s0>trsp/corr).
Is there any way to perform a client copy without bringing over the PD information?
Thanks in advance!

A client copy does just that, copies the entire client. So unfortunately, no.
Paul

Client copy with configuration data in R/3. Is there any effect on EBP sys

Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advance

waiting online

Catch client disconnect without sending data?

I am writing a Java Servlet and I need to know if the client has disconnected (pushed the stop button, closed the browser, etc) without sending data. Basically, I need to call socket.isOutputShutdown() on the connected socket. However, the Java Servlet interface does not provide access to the socket, only the socket's output stream. In the book Java Servlet Programming (2nd edition) by Jason Hunter, page 159 suggests attempting to write a single space and then catching the resulting error. This works fine for HTML, but my servlet is not guaranteed to be sending HTML. It could be sending a file, in which case miscellaneous "ping" spaces would corrupt it.
Is there a way to check if the client has disconnected without sending "ping" data from a servlet?
Thanks,
Nathan Lewis
P.S. I thought I posted this a couple days ago, but I can't find it now.

This appears to be very close, but I don't think it'll work. I want to know if/when the client hits the stop button on their browser (or otherwise closes the TCP socket). The Unbound event only occurs if:
1. The session times out
2. The user reloads the page. (Then Unbound is immediately followed by a Bound event)
However, an Unbound event doesn't seem to be occuring if the user hits stop. It doesn't occur until the session times out. If I set the session timeout interval to something short, the Unbound even is occuring even though the client is still connected! This happens with the servlet container I'm using, as well as TomCat 3.3.

How to print html file on client system without viewing data on client syst

I want to print html data from database.
i am not able to print it using java code,
javascript can do that.
but in javascript window is opened on client browser.
but i dont want to open that
var disp_setting="toolbar=no,location=no,directories=no,menubar=no,";
       disp_setting+="scrollbars=no,width=0,height=0";
     var docprint = window.open("","",disp_setting);
     //docprint = new PopUpWindow() ;
     docprint.document.write('<%= mm %>');
     docprint.document.close();
        docprint.focus();
     docprint.document = null; mm contents the data to be printed. it prints well but window is shown
in mm there is <BODY self.print() > so it prints on printer but i am viewing window i donot want to view window....
and print Dialog box also.. I want to by pass this both.
please send me code or any help regarding that.
....

1. Post a javascript question on a javascript forum please.
2. Don't think you can bypass without some plugin/setting on the client browser.

Client Copy: copy only master data

Hi!
Is it possible to copy only master data from e.g. client 100 to client 200?
If yes, which technical steps are necessary (tcode, etc.)?
Client 100 is the copy of client 200 without master data.
Thank you,
regards
Thom

You can Copy all the customizing data from one client to another client using clent copy(SCC1). Ie, data stored in a customizing request.

Transaction data tobe separated from master data&customising in client copy

HI Guys,
In my present server i have Transaction data, Master data & Customizing data. Through client copy only Master data & Customizing should be copied in new client. Transaction Data should not be copied to new client. This is not possible through any of the given profiles for copy.
or can we delete all transaction data in present server?
Thanks.
Abhijit..

Hi Ashok,
With SAP_CUST i won't get the Master Data to the copied client. It will only provide Customization.
Thanks,
Abhijit.

Local Client copy - help needed

Hello ,
I have to perform a client copy without data.
Can you please let me know, which profile I should use ?
SAP_ALL All Client-Specific Data w/o Change Documents
SAP_APPL Customizing and Application Data w/o Change Docs
SAP_APPX SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST Customizing
SAP_CUSV Customizing and User Variants
SAP_CUSX Customizing w/o Authorization Profiles and Roles
SAP_PROF Only Authorization Profiles and Roles
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
SAP_UONL User Without Authorization Profiles and Roles
SAP_USER User Master Records and Authorization Profiles
Thanks in advance for your help!
I would vote for:
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
Daniel
Edited by: Daniel_Bul on Mar 7, 2012 11:22 AM

Hi,
SAP_CUSX would be better if you dont want the same user master data in both the clients otherwise you can go ahead with SAP_UCSV .
Regards,
Nirmal.K

Remote client copy - scc9

Hi All
am performing remote client copy through scc9, created RFC & tested connection,
this server is not in the transport landscape.
when i execute scc9 and select profile SAP_ALL from target system (Production server) it runs for 5-7 mins and ends with message as "The client copy you started has terminated Tables cannot be converted.
should the users on Production server to be locked.
here is the logs in SCC3:
Client in Source System 500
Copy Type                 Remote copy
Profile                   SAP_ALL
Status                    Cancelled. See Log
User                      MODI_SUPER
Start on                  31.08.2009 / 16:47:19
Last Entry on             31.08.2009 / 16:50:00
Last Action:              RFC DDIC System Comparison
Statistics for this Run
- No. of Tables                   0 of     53521
- Copied Lines                    0
Warnings and Errors
Table Name      Component Package
A543                      Table Def. Missing Locally
A544                      Table Def. Missing Locally
A800                      Table Def. Missing Locally
A950                      Table Def. Missing Locally
A960                      Table Def. Missing Locally
A961                      Table Def. Missing Locally
ZCOM                      Table Def. Missing Locally
ZCSKS                     Field missing locally
ZEMAIL                    Table has Incompatible Fields
ZLR_DTL                   Field missing locally
ZMM_RGP_SLNO              Different Field Names
ZPM_CALIBRATION           Field missing locally
ZSDD                      Table not Convertible

Hi Ashun8
Please not be in rush as your SD & MM consultant need to testing some scenarior on sandbox.
As being Basis expert! you should have many comprisions including patch level on both server before initiate the Remote Client Copy.
I will prefer to do the system copy instead the Remote Client copy without downtime on PRD server.
Regards
Anwer Waseem
SAP NetWeaver Basis

Extremely slow during Local client copy

Hi guru's,
We have planed for the local client copy in our system.Normally it would n't take much time(generally it will finished between 8 to 9 hr max), but this time it took 4 days still it's running.
how to know why it took so long to complete?
thanks in advance
best regards
venkat.

Dear,
Venkat.
Can i know your SAP Version ,OS,database. & size of the database.
If you want to improve the performance.you have to exclude the data
Improving client copy performance: Excluding data
You can improve the performance of the client copy by, for example, by excluding tables or packages.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab. For further information about excluding tables from the client copy, choose the Help button in the expert settings.
For further information about expert settings in the client copy, see the SAP note 446485.
by this your client copy performance can be increased.
Warm Regards.
Mohammed Hassan Naveed
Associate SAP Basis Consultant
Mumbai.

Does client copy erase all the data in the target client or?

hi
experts
does clientcopy erase all the data in the target client or except user master records.
regards
rajendra.

It depends upon the profile you use for the client copy.
if you use SAP_ALL
All data is deleted from target client and source client data is copied.
and therefore you shall see the profiles and understand them .
SAP_ALL    All Client-Specific Data w/o Change Documents
SAP_APPL   Customizing and Application Data w/o Change Docs
SAP_APPX   SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST   Customizing
SAP_CUSV   Customizing and User Variants
SAP_CUSX   Customizing w/o Authorization Profiles and Roles
SAP_PROF   Only Authorization Profiles and Roles
SAP_UCSV   Customizing, User Master Records and User Variants
SAP_UCUS   Customizing and User Master Records
SAP_UONL   User Without Authorization Profiles and Roles
SAP_USER   User Master Records and Authorization Profiles
Hope it helps.
Thanks
Amit

Create Client copy only with Master data

hi friends,
we are going for SAP Re-Implementation.
we want client copy only with master data without having transactional data
Is it possible to copy the master data from production to production.
can we transfer the data using ALE/I DOCS...?
Is there is any standard BAPI to transfer data across client....?
if there is any solution please give me guidance.
i have searched in SDN and SAP technical but i can't find the proper solution.
Thanks in advance.
regards,
karunakar

Hi Karunakar,
1) Make a client copy ready 2) Use Idoc and moved the master data. I am not sure how much data it is.We did the same before.
Check these links form Peter.
[TDMS|http://204.154.71.138/images/whiterhino/fp/tstsym5/testdatamigrationserver.pdf]
[TDMS Wiki|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b43e2b4d-0b01-0010-c191-cba32880cb95?QuickLink=index&overridelayout=true]
Regards,
Madhu.

Data migration from one DEV(DE1) system to other DEV(DE2) BW system using client copy or client export import

HI SAP Gurus,
Please find the below details:
SAP NetWeaver 7.3
We have to copy all customized or developed BW objects like master data, DSO's , Infocubes , Reports etc.
We need only the design changes but not the data within the DSO or cubes that exist .
We have tried below procedure:
1) Taken export of DE1 source client 400 with profile SAP_CUST
2) Imported transports generated for above export into DE2 target client 350.
3) Executed transaction SCC3 and performed post processing, post processing was successful . Still we are not able to see DSO's, infocubes ,reports.
Please lets us know what we need to do to fulfill our requirement.
Thanks,
Avadhesh
+ 91 8095226536

Hi Basis,
Please refer to below documentation on how to perform system copy in BI systems
How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
Post processing steps for SAP BW system copy or db copy
BI systems has mostly cross client objects. So client copy with SAP_CUST profile will not serve your purpose.
Hope this helps.
Regards,
Deepak Kori

Client copy Only data

Hi,
   We have a copy of production client in Quality system.
   This client copy was done few months back, can we update the client in quality with the data which was updated in production after the client copy.
Or will I have to do entire client copy again.
How much data will be copied in this is there any way to find.
Thanks
Parvez Khan.

Parvez,
                  Goto SE38 and enter RSTABLESIZE then execute, there you select client XXX and select tables * then save it it will ask for variant. Give a variant name like var1, and description. agin save it.
Go to SM36 and create a new job(with some name) and select RSTABLESIZE in the next tabs select variant as var1. If you select new job to start immediately it will start immediately, you can check in SM37, after completion goto the corresponding spool request and in which you will find the size.
Regards,
Hari.
PS: Awarding point will get you some points.

Client copy without tranasactional data

Similar Messages

Maybe you are looking for