Client not yet reported

Hello,
Setup a new Windows Server 2008 Standard R2 domain with WSUS.
Added a new OU & linked a WSUS GPO to it.
Added one Windows 7 Pro 64 bit test client to the domain & moved it to the OU.
Confirmed WSUS sees the client machine under both 'All Computers' & 'Unassigned Computers' but with a 'not yet reported' status.
Successfully ran ALL the steps in this article below including wuauclt.exe /resetauthorization /detectnow and it's been over an hour but still not change in status.
http://technet.microsoft.com/en-us/library/cc708627(v=ws.10).aspx
Should I give it more time and see or are there other steps I should take instead?
Thanks

Hi Steven,
I have completed a rebuild of my test client (Windows 7 Pro 64 bit) and then:
- Connected to internet & installed one round of 29 windows updates
- joined the client to my Windows 2008 domain
- moved the client to my WSUS OU, replicated to all DC's
- successfully ran gpupdate /force
- Successfully ran ALL the steps in this article below including wuauclt.exe
/resetauthorization /detectnowand
http://technet.microsoft.com/en-us/library/cc708627(v=ws.10).aspx
- as mentioned yesterday, the MS Report Viewer Redistributable 2008 is indeed installed however still
has the 'not reported' status
- attempted a client shutdown a few times and no updates are installing
Below is a snapshot of the client's windowsupdate.log after it's connected to the WSUS server for your review:
2014-10-03 10:06:01:324 948 b7c Agent * WSUS server: http://192.168.5.250 (Changed)
2014-10-03 10:06:01:324 948 b7c Agent * WSUS status server: http://192.168.5.250 (Changed)
2014-10-03 10:06:01:324 948 b7c Agent * Target group: (Unassigned Computers) (Unchanged)
2014-10-03 10:06:01:324 948 b7c Agent * Windows Update access disabled: No (Unchanged)
2014-10-03 10:06:01:324 948 b7c AU AU received policy change subscription event
2014-10-03 10:06:01:324 948 b7c AU Sus server changed through policy.
2014-10-03 10:06:01:324 948 b7c AU AU Options changed from policy.
2014-10-03 10:06:01:324 948 b7c AU Successfully wrote event for AU health state:0
2014-10-03 10:06:01:324 948 b7c AU ########### AU: Policy change processed ###########
2014-10-03 10:06:01:324 948 b7c AU # Policy changed, AU refresh required = No
2014-10-03 10:06:01:324 948 b7c AU # WSUS server: http://192.168.5.250
2014-10-03 10:06:01:324 948 b7c AU # Detection frequency: 22
2014-10-03 10:06:01:324 948 b7c AU # Approval type: Pre-install notify (Policy)
2014-10-03 10:06:01:324 948 b7c AU # Auto-install minor updates: No (User preference)
2014-10-03 10:06:01:324 948 b7c AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-03 10:06:01:324 948 b7c AU AU Refresh required....
2014-10-03 10:06:01:324 948 b7c AU AU setting next detection timeout to 2014-10-03 14:06:01
2014-10-03 10:06:01:324 948 b7c AU AU setting next featured software notification timeout to 2014-10-03 14:06:01
2014-10-03 10:06:01:324 948 b7c AU Successfully wrote event for AU health state:0
2014-10-03 10:06:01:324 948 b7c AU Triggering Online detection (non-interactive)
2014-10-03 10:06:01:324 948 b7c AU #############
2014-10-03 10:06:01:324 948 b7c AU ## START ## AU: Search for updates
2014-10-03 10:06:01:324 948 b7c AU #########
2014-10-03 10:06:01:324 948 b7c AU <<## SUBMITTED ## AU: Search for updates [CallId = {5F86BBA3-A9B2-4532-AF69-A7D67881E8B2}]
2014-10-03 10:06:01:324 948 eb4 Agent *************
2014-10-03 10:06:01:324 948 eb4 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:06:01:324 948 eb4 Agent *********
2014-10-03 10:06:01:324 948 eb4 Agent * Online = Yes; Ignore download priority = No
2014-10-03 10:06:01:324 948 eb4 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-03 10:06:01:324 948 eb4 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-10-03 10:06:01:324 948 eb4 Agent * Search Scope = {Machine}
2014-10-03 10:06:01:324 948 eb4 Setup Checking for agent SelfUpdate
2014-10-03 10:06:01:324 948 eb4 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-10-03 10:06:01:324 948 eb4 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-10-03 10:06:01:340 948 b7c AU AU received handle event
2014-10-03 10:06:01:355 948 eb4 Misc Microsoft signed: Yes
2014-10-03 10:06:08:527 948 eb4 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-10-03 10:06:08:543 948 eb4 Misc Microsoft signed: Yes
2014-10-03 10:06:08:543 948 eb4 Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab are not trusted: Error 0x800b0001
2014-10-03 10:06:08:543 948 eb4 Setup WARNING: SelfUpdate check failed to download package information, error = 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Setup FATAL: SelfUpdate check failed, err = 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Agent * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Agent * WARNING: Exit code = 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Agent *********
2014-10-03 10:06:08:543 948 eb4 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:06:08:543 948 eb4 Agent *************
2014-10-03 10:06:08:543 948 eb4 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-10-03 10:06:08:543 948 eb4 Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:06:08:543 948 c98 AU >>## RESUMED ## AU: Search for updates [CallId = {5F86BBA3-A9B2-4532-AF69-A7D67881E8B2}]
2014-10-03 10:06:08:543 948 c98 AU # WARNING: Search callback failed, result = 0x800B0001
2014-10-03 10:06:08:543 948 c98 AU # WARNING: Failed to find updates with error code 800B0001
2014-10-03 10:06:08:543 948 c98 AU #########
2014-10-03 10:06:08:543 948 c98 AU ## END ## AU: Search for updates [CallId = {5F86BBA3-A9B2-4532-AF69-A7D67881E8B2}]
2014-10-03 10:06:08:543 948 c98 AU #############
2014-10-03 10:06:08:543 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:06:08:543 948 c98 AU AU setting next detection timeout to 2014-10-03 19:06:08
2014-10-03 10:06:08:543 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:06:08:543 948 c98 AU AU setting pending client directive to 'Install Approval'
2014-10-03 10:06:08:543 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:06:13:504 948 eb4 Report REPORT EVENT: {D0013D8C-171B-4102-9C2D-4D917C5558A6} 2014-10-03 10:06:08:543-0400 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 800b0001 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-10-03 10:06:13:520 948 eb4 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-10-03 10:06:13:520 948 eb4 Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-10-03 10:06:13:520 948 eb4 Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:06:23:459 948 b7c AU Launched new AU client for directive 'Install Approval', session id = 0x1
2014-10-03 10:09:30:104 948 53c AU Triggering AU detection through DetectNow API
2014-10-03 10:09:30:104 948 53c AU Triggering Online detection (non-interactive)
2014-10-03 10:09:30:104 948 b7c AU #############
2014-10-03 10:09:30:104 948 b7c AU ## START ## AU: Search for updates
2014-10-03 10:09:30:104 948 b7c AU #########
2014-10-03 10:09:30:104 948 b7c AU <<## SUBMITTED ## AU: Search for updates [CallId = {20D490B8-34AB-4F35-B591-7DE6E3334A29}]
2014-10-03 10:09:30:104 948 eb4 Agent *************
2014-10-03 10:09:30:104 948 eb4 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:09:30:104 948 eb4 Agent *********
2014-10-03 10:09:30:104 948 eb4 Agent * Online = Yes; Ignore download priority = No
2014-10-03 10:09:30:104 948 eb4 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-03 10:09:30:104 948 eb4 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-10-03 10:09:30:104 948 eb4 Agent * Search Scope = {Machine}
2014-10-03 10:09:30:104 948 eb4 Setup Checking for agent SelfUpdate
2014-10-03 10:09:30:104 948 eb4 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-10-03 10:09:30:104 948 eb4 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-10-03 10:09:30:119 948 eb4 Misc Microsoft signed: Yes
2014-10-03 10:09:30:119 948 eb4 Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab are not trusted: Error 0x800b0001
2014-10-03 10:09:30:119 948 eb4 Setup WARNING: SelfUpdate check failed to download package information, error = 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Setup FATAL: SelfUpdate check failed, err = 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Agent * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Agent * WARNING: Exit code = 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Agent *********
2014-10-03 10:09:30:119 948 eb4 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:09:30:119 948 eb4 Agent *************
2014-10-03 10:09:30:119 948 eb4 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-10-03 10:09:30:119 948 c98 AU >>## RESUMED ## AU: Search for updates [CallId = {20D490B8-34AB-4F35-B591-7DE6E3334A29}]
2014-10-03 10:09:30:119 948 c98 AU # WARNING: Search callback failed, result = 0x800B0001
2014-10-03 10:09:30:119 948 c98 AU # WARNING: Failed to find updates with error code 800B0001
2014-10-03 10:09:30:119 948 c98 AU #########
2014-10-03 10:09:30:119 948 c98 AU ## END ## AU: Search for updates [CallId = {20D490B8-34AB-4F35-B591-7DE6E3334A29}]
2014-10-03 10:09:30:119 948 c98 AU #############
2014-10-03 10:09:30:119 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:09:30:119 948 c98 AU AU setting next detection timeout to 2014-10-03 19:09:30
2014-10-03 10:09:30:119 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:09:30:119 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:09:35:110 948 eb4 Report REPORT EVENT: {2F7F2F87-9433-452B-9370-39293B41661A} 2014-10-03 10:09:30:119-0400 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 800b0001 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-10-03 10:09:35:110 948 eb4 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-10-03 10:09:35:110 948 eb4 Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-10-03 10:09:35:110 948 eb4 Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:10:13:485 948 eb4 PT WARNING: Cached cookie has expired or new PID is available
2014-10-03 10:10:13:485 948 eb4 PT Initializing simple targeting cookie, clientId = 6a090254-caeb-4241-a3cc-48a39310f2e2, target group = , DNS name = hp2560p-bob.usdecnmpf.org
2014-10-03 10:10:13:485 948 eb4 PT Server URL = http://192.168.5.250/SimpleAuthWebService/SimpleAuth.asmx
2014-10-03 10:10:13:765 948 eb4 Report Uploading 2 events using cached cookie, reporting URL = http://192.168.5.250/ReportingWebService/ReportingWebService.asmx
2014-10-03 10:10:13:765 948 eb4 Report Reporter successfully uploaded 2 events.
2014-10-03 10:30:09:852 948 b7c AU AU received handle event
2014-10-03 10:30:09:852 948 b7c AU AU setting pending client directive to 'Install Approval'
2014-10-03 10:30:12:049 948 b7c Shutdwn user declined update at shutdown
2014-10-03 10:30:12:049 948 b7c AU Successfully wrote event for AU health state:0
2014-10-03 10:30:12:049 948 b7c AU AU initiates service shutdown
2014-10-03 10:30:12:049 948 b7c AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-03 10:30:12:330 948 b7c Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:30:12:361 948 b7c Service *********
2014-10-03 10:30:12:361 948 b7c Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-03 10:30:12:361 948 b7c Service *************
2014-10-03 10:32:36:077 924 cfc Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-10-03 10:32:36:077 924 cfc Misc = Process: C:\Windows\system32\svchost.exe
2014-10-03 10:32:36:093 924 cfc Misc = Module: c:\windows\system32\wuaueng.dll
2014-10-03 10:32:36:077 924 cfc Service *************
2014-10-03 10:32:36:093 924 cfc Service ** START ** Service: Service startup
2014-10-03 10:32:36:093 924 cfc Service *********
2014-10-03 10:32:36:155 924 cfc Agent * WU client version 7.6.7600.256
2014-10-03 10:32:36:155 924 cfc Agent * Base directory: C:\Windows\SoftwareDistribution
2014-10-03 10:32:36:155 924 cfc Agent * Access type: No proxy
2014-10-03 10:32:36:155 924 cfc Agent * Network state: Connected
2014-10-03 10:33:22:084 924 cfc Report CWERReporter::Init succeeded
2014-10-03 10:33:22:084 924 cfc Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-03 10:33:22:084 924 cfc Agent *********** Agent: Initializing global settings cache ***********
2014-10-03 10:33:22:084 924 cfc Agent * WSUS server: http://192.168.5.250
2014-10-03 10:33:22:084 924 cfc Agent * WSUS status server: http://192.168.5.250
2014-10-03 10:33:22:084 924 cfc Agent * Target group: (Unassigned Computers)
2014-10-03 10:33:22:084 924 cfc Agent * Windows Update access disabled: No
2014-10-03 10:33:22:084 924 cfc DnldMgr Download manager restoring 0 downloads
2014-10-03 10:33:22:084 924 cfc AU ########### AU: Initializing Automatic Updates ###########
2014-10-03 10:33:22:084 924 cfc AU # WSUS server: http://192.168.5.250
2014-10-03 10:33:22:084 924 cfc AU # Detection frequency: 22
2014-10-03 10:33:22:084 924 cfc AU # Approval type: Pre-install notify (Policy)
2014-10-03 10:33:22:084 924 cfc AU # Auto-install minor updates: No (User preference)
2014-10-03 10:33:22:084 924 cfc AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-03 10:33:22:099 924 cfc Agent WARNING: Failed to get deployment data from data store, error 80248007
2014-10-03 10:33:22:099 924 cfc Agent WARNING: Failed to get deployment data from data store, error 80248007
2014-10-03 10:33:22:162 924 cfc Report *********** Report: Initializing static reporting data ***********
2014-10-03 10:33:22:162 924 cfc Report * OS Version = 6.1.7600.0.0.65792
2014-10-03 10:33:22:162 924 cfc Report * OS Product Type = 0x00000030
2014-10-03 10:33:22:162 924 cfc Report * Computer Brand = Hewlett-Packard
2014-10-03 10:33:22:162 924 cfc Report * Computer Model = HP EliteBook 2560p
2014-10-03 10:33:22:177 924 cfc Report * Bios Revision = 68SSU Ver. F.50
2014-10-03 10:33:22:177 924 cfc Report * Bios Name = Default System BIOS
2014-10-03 10:33:22:177 924 cfc Report * Bios Release Date = 2014-08-04T00:00:00
2014-10-03 10:33:22:177 924 cfc Report * Locale ID = 1033
2014-10-03 10:33:22:177 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:33:22:177 924 cfc AU Initializing featured updates
2014-10-03 10:33:22:177 924 cfc AU Found 0 cached featured updates
2014-10-03 10:33:22:177 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:33:22:177 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:33:22:177 924 cfc AU AU finished delayed initialization
2014-10-03 10:33:27:184 924 2bc Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:57:03:039 924 cfc Shutdwn user declined update at shutdown
2014-10-03 10:57:03:039 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:57:03:039 924 cfc AU AU initiates service shutdown
2014-10-03 10:57:03:039 924 cfc AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-03 10:57:03:320 924 cfc Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:57:03:320 924 cfc Service *********
2014-10-03 10:57:03:320 924 cfc Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-03 10:57:03:320 924 cfc Service *************
2014-10-03 10:59:27:048 948 324 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-10-03 10:59:27:048 948 324 Misc = Process: C:\Windows\system32\svchost.exe
2014-10-03 10:59:27:048 948 324 Misc = Module: c:\windows\system32\wuaueng.dll
2014-10-03 10:59:27:048 948 324 Service *************
2014-10-03 10:59:27:048 948 324 Service ** START ** Service: Service startup
2014-10-03 10:59:27:064 948 324 Service *********
2014-10-03 10:59:27:126 948 324 Agent * WU client version 7.6.7600.256
2014-10-03 10:59:27:126 948 324 Agent * Base directory: C:\Windows\SoftwareDistribution
2014-10-03 10:59:27:126 948 324 Agent * Access type: No proxy
2014-10-03 10:59:27:126 948 324 Agent * Network state: Connected

Similar Messages

WSUS 3.0 SP2 Some clients have not yet reported

Hi, I am ready to tear my hair out here. My WSUS Server is running version 3.0 SP2 (Server Version 3.2.7600.274. I have installed the following KB's on the server (KB2720211, KB2734608 and KB29308066). Around 60% of my clients have a status of not yet reported.
The clients are on client version 7.6.7600.320. I am attaching some of the windowsupdate.log details from one of the clients which has not yet reported. Have I missed something obvious here?
Many thanks,
Niall.
04:28:04:003+0100 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 0 updates.
2014-08-25 04:28:09:019 1328 8488 Report REPORT EVENT: {0141507D-D9AD-4A88-ABD4-AD57621FE5A5} 2014-08-25 04:28:04:004+0100 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment
Check Reporting client status.
2014-08-25 04:28:09:019 1328 8488 Report CWERReporter finishing event handling. (00000000)
2014-08-25 09:26:05:061 24804 9c54 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0100) ===========
2014-08-25 09:26:05:062 24804 9c54 Misc   = Process: C:\Windows\System32\sdiagnhost.exe
2014-08-25 09:26:05:062 24804 9c54 Misc   = Module: C:\Windows\system32\wuapi.dll
2014-08-25 09:26:05:061 24804 9c54 COMAPI -------------
2014-08-25 09:26:05:062 24804 9c54 COMAPI -- START -- COMAPI: Search [ClientId = <NULL>]
2014-08-25 09:26:05:062 24804 9c54 COMAPI ---------
2014-08-25 09:26:05:159 1328 88f0 Agent *************
2014-08-25 09:26:05:159 24804 9c54 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
2014-08-25 09:26:05:159 1328 88f0 Agent ** START ** Agent: Finding updates [CallerId = ]
2014-08-25 09:26:05:159 1328 88f0 Agent *********
2014-08-25 09:26:05:159 1328 88f0 Agent   * Online = Yes; Ignore download priority = No
2014-08-25 09:26:05:159 1328 88f0 Agent   * Criteria = "IsInstalled=0 and Type='Software'"
2014-08-25 09:26:05:159 1328 88f0 Agent   * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
2014-08-25 09:26:05:159 1328 88f0 Agent   * Search Scope = {Machine}
2014-08-25 09:26:13:705 1328 88f0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-08-25 09:26:13:705 1328 88f0 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://sccm2012:8530/ClientWebService/client.asmx
2014-08-25 09:26:13:749 1328 88f0 PT WARNING: Cached cookie has expired or new PID is available
2014-08-25 09:26:13:749 1328 88f0 PT Initializing simple targeting cookie, clientId = 03fda369-08de-4b42-b59b-e98bce63adf7, target group = , DNS name = cipclyn2012.comitirl.local
2014-08-25 09:26:13:749 1328 88f0 PT   Server URL =
http://sccm2012:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-08-25 09:28:16:001 1328 88f0 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-08-25 09:28:16:001 1328 88f0 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://sccm2012:8530/ClientWebService/client.asmx
2014-08-25 09:28:23:751 1328 88f0 Agent   * Found 0 updates and 88 categories in search; evaluated appl. rules of 1664 out of 2963 deployed entities
2014-08-25 09:28:23:817 1328 88f0 Agent *********
2014-08-25 09:28:23:817 1328 88f0 Agent ** END ** Agent: Finding updates [CallerId = ]
2014-08-25 09:28:23:817 1328 88f0 Agent *************
2014-08-25 09:28:23:905 24804 8a1c COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
2014-08-25 09:28:23:916 24804 8a1c COMAPI   - Updates found = 0
2014-08-25 09:28:23:916 24804 8a1c COMAPI ---------
2014-08-25 09:28:23:916 24804 8a1c COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
2014-08-25 09:28:23:916 24804 8a1c COMAPI -------------
2014-08-25 09:28:28:813 1328 88f0 Report REPORT EVENT: {7F3E0617-A580-41BA-B529-EF750F2C7247} 2014-08-25 09:28:23:813+0100 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0  Success Software
Synchronization Windows Update Client successfully detected 0 updates.
2014-08-25 09:28:28:813 1328 88f0 Report REPORT EVENT: {22EEDD35-6254-4F0B-8865-F221A48D37FF} 2014-08-25 09:28:23:817+0100 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0  Success Pre-Deployment
Check Reporting client status.
2014-08-25 09:28:28:813 1328 88f0 Report CWERReporter finishing event handling. (00000000)
2014-08-25 09:29:01:003 1328 2c18 AU ########### AU: Uninitializing Automatic Updates ###########
2014-08-25 09:29:01:096 1328 2c18 Report CWERReporter finishing event handling. (00000000)
2014-08-25 09:29:01:704 1328 2c18 Service *********
2014-08-25 09:29:01:704 1328 2c18 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-08-25 09:29:01:704 1328 2c18 Service *************
2014-08-25 09:29:02:382 1328 9cac Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0100) ===========
2014-08-25 09:29:02:383 1328 9cac Misc   = Process: C:\Windows\system32\svchost.exe
2014-08-25 09:29:02:383 1328 9cac Misc   = Module: c:\windows\system32\wuaueng.dll
2014-08-25 09:29:02:382 1328 9cac Service *************
2014-08-25 09:29:02:383 1328 9cac Service ** START ** Service: Service startup
2014-08-25 09:29:02:383 1328 9cac Service *********
2014-08-25 09:29:02:422 1328 9cac Agent   * WU client version 7.6.7600.320
2014-08-25 09:29:02:422 1328 9cac Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-08-25 09:29:02:422 1328 9cac Agent   * Access type: No proxy
2014-08-25 09:29:02:422 1328 9cac Agent   * Network state: Connected
2014-08-25 09:29:33:789 1328 9efc Report CWERReporter::Init succeeded
2014-08-25 09:29:33:789 1328 9efc Agent *********** Agent: Initializing Windows Update Agent ***********
2014-08-25 09:29:33:809 1328 9efc Agent   * Prerequisite roots succeeded.
2014-08-25 09:29:33:813 1328 9efc Agent *********** Agent: Initializing global settings cache ***********
2014-08-25 09:29:33:813 1328 9efc Agent   * WSUS server:
http://sccm2012:8530
2014-08-25 09:29:33:813 1328 9efc Agent   * WSUS status server:
http://sccm2012:8530
2014-08-25 09:29:33:813 1328 9efc Agent   * Target group: (Unassigned Computers)
2014-08-25 09:29:33:813 1328 9efc Agent   * Windows Update access disabled: No
2014-08-25 09:29:33:842 1328 9efc DnldMgr Download manager restoring 0 downloads
2014-08-25 09:29:33:846 1328 9efc AU ########### AU: Initializing Automatic Updates ###########
2014-08-25 09:29:33:847 1328 9efc AU   # WSUS server:
http://sccm2012:8530
2014-08-25 09:29:33:848 1328 9efc AU   # Detection frequency: 22
2014-08-25 09:29:33:848 1328 9efc AU   # Approval type: Scheduled (Policy)
2014-08-25 09:29:33:848 1328 9efc AU   # Scheduled install day/time: Every day at 3:00
2014-08-25 09:29:33:848 1328 9efc AU   # Auto-install minor updates: Yes (User preference)
2014-08-25 09:29:33:848 1328 9efc AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-08-25 09:29:33:848 1328 9efc AU   # Will display featured software notifications (User preference)
2014-08-25 09:29:33:850 1328 9efc AU Setting AU scheduled install time to 2014-08-26 02:00:00
2014-08-25 09:29:34:669 1328 9cac Report *********** Report: Initializing static reporting data ***********
2014-08-25 09:29:34:669 1328 9cac Report   * OS Version = 6.1.7601.1.0.65792
2014-08-25 09:29:34:669 1328 9cac Report   * OS Product Type = 0x00000030
2014-08-25 09:29:34:679 1328 9cac Report   * Computer Brand = Hewlett-Packard
2014-08-25 09:29:34:679 1328 9cac Report   * Computer Model = HP Compaq 8200 Elite CMT PC
2014-08-25 09:29:34:681 1328 9cac Report   * Bios Revision = J01 v02.15
2014-08-25 09:29:34:681 1328 9cac Report   * Bios Name = Default System BIOS
2014-08-25 09:29:34:681 1328 9cac Report   * Bios Release Date = 2011-11-10T00:00:00
2014-08-25 09:29:34:682 1328 9cac Report   * Locale ID = 6153
2014-08-25 09:29:34:770 1328 9efc AU Successfully wrote event for AU health state:0
2014-08-25 09:29:34:771 1328 9efc AU Initializing featured updates
2014-08-25 09:29:34:772 1328 9efc AU Found 0 cached featured updates
2014-08-25 09:29:34:772 1328 9efc AU Successfully wrote event for AU health state:0
2014-08-25 09:29:34:773 1328 9efc AU Successfully wrote event for AU health state:0
2014-08-25 09:29:34:773 1328 9efc AU AU finished delayed initialization
2014-08-25 09:29:39:774 1328 9ed8 Report CWERReporter finishing event handling. (00000000)
2014-08-25 09:29:42:391 1328 9efc AU Triggering AU detection through DetectNow API
2014-08-25 09:29:42:391 1328 9efc AU Triggering Online detection (interactive)
2014-08-25 09:29:42:391 1328 9cac AU #############
2014-08-25 09:29:42:391 1328 9cac AU ## START ## AU: Search for updates
2014-08-25 09:29:42:391 1328 9cac AU #########
2014-08-25 09:29:42:440 1328 9cac AU <<## SUBMITTED ## AU: Search for updates [CallId = {A408A720-49E6-4DB1-AD61-086D50DCACDF}]
2014-08-25 09:29:42:440 1328 9ed8 Agent *************
2014-08-25 09:29:42:440 1328 9ed8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-25 09:29:42:440 1328 9ed8 Agent *********
2014-08-25 09:29:42:440 1328 9ed8 Agent   * Online = Yes; Ignore download priority = No
2014-08-25 09:29:42:440 1328 9ed8 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-08-25 09:29:42:440 1328 9ed8 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-25 09:29:42:440 1328 9ed8 Agent   * Search Scope = {Machine}
2014-08-25 09:29:42:440 1328 9ed8 Setup Checking for agent SelfUpdate
2014-08-25 09:29:42:464 1328 9ed8 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2014-08-25 09:29:44:825 1328 9ed8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-08-25 09:29:44:927 1328 9ed8 Misc Microsoft signed: NA
2014-08-25 09:29:44:936 1328 9ed8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP5629.tmp with dwProvFlags 0x00000080:
2014-08-25 09:29:45:042 1328 9ed8 Misc Microsoft signed: NA
2014-08-25 09:29:45:125 1328 9ed8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2014-08-25 09:29:45:129 1328 9ed8 Misc Microsoft signed: NA
2014-08-25 09:29:45:140 1328 9ed8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2014-08-25 09:29:45:144 1328 9ed8 Misc Microsoft signed: NA
2014-08-25 09:29:45:424 1328 9ed8 Setup Determining whether a new setup handler needs to be downloaded
2014-08-25 09:29:45:424 1328 9ed8 Setup SelfUpdate handler is not found. It will be downloaded
2014-08-25 09:29:45:425 1328 9ed8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-08-25 09:29:45:427 1328 9ed8 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320" is already installed.
2014-08-25 09:29:45:427 1328 9ed8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-08-25 09:29:45:441 1328 9ed8 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320" is already installed.
2014-08-25 09:29:45:441 1328 9ed8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-08-25 09:29:45:461 1328 9ed8 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320" is already installed.
2014-08-25 09:29:45:461 1328 9ed8 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-08-25 09:29:47:333 1328 9ed8 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-08-25 09:29:47:333 1328 9ed8 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://sccm2012:8530/ClientWebService/client.asmx
2014-08-25 09:30:45:148 1328 9ed8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-08-25 09:30:45:148 1328 9ed8 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://sccm2012:8530/ClientWebService/client.asmx
2014-08-25 09:30:46:111 1328 9ed8 Agent   * Found 0 updates and 88 categories in search; evaluated appl. rules of 1664 out of 2963 deployed entities
2014-08-25 09:30:46:166 1328 9ed8 Agent *********
2014-08-25 09:30:46:166 1328 9ed8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-25 09:30:46:166 1328 9ed8 Agent *************
2014-08-25 09:30:46:189 1328 9dd8 AU >>## RESUMED ## AU: Search for updates [CallId = {A408A720-49E6-4DB1-AD61-086D50DCACDF}]
2014-08-25 09:30:46:189 1328 9dd8 AU   # 0 updates detected
2014-08-25 09:30:46:190 1328 9dd8 AU #########
2014-08-25 09:30:46:190 1328 9dd8 AU ## END ## AU: Search for updates [CallId = {A408A720-49E6-4DB1-AD61-086D50DCACDF}]
2014-08-25 09:30:46:190 1328 9dd8 AU #############
2014-08-25 09:30:46:190 1328 9dd8 AU Successfully wrote event for AU health state:0
2014-08-25 09:30:46:190 1328 9dd8 AU Featured notifications is disabled.
2014-08-25 09:30:46:190 1328 9dd8 AU AU setting next detection timeout to 2014-08-26 02:34:43
2014-08-25 09:30:46:190 1328 9dd8 AU Setting AU scheduled install time to 2014-08-26 02:00:00
2014-08-25 09:30:46:191 1328 9dd8 AU Successfully wrote event for AU health state:0
2014-08-25 09:30:46:191 1328 9dd8 AU Successfully wrote event for AU health state:0
2014-08-25 09:30:51:194 1328 9ed8 Report REPORT EVENT: {5D2061CD-53DE-4485-A7FE-F3D5C5A56D14} 2014-08-25 09:30:46:161+0100 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software
Synchronization Windows Update Client successfully detected 0 updates.
2014-08-25 09:30:51:194 1328 9ed8 Report REPORT EVENT: {B3107C31-2383-4E05-9666-735E6BB3376C} 2014-08-25 09:30:46:166+0100 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment
Check Reporting client status.
2014-08-25 09:30:51:194 1328 9ed8 Report CWERReporter finishing event handling. (00000000)
2014-08-25 09:34:46:986 1328 9cac AU AU setting next sqm report timeout to 2014-08-26 08:34:46
2014-08-25 09:48:15:146 1328 9cac AU ########### AU: Uninitializing Automatic Updates ###########
2014-08-25 09:48:16:775 1328 9cac Report CWERReporter finishing event handling. (00000000)
2014-08-25 09:48:16:818 1328 9cac Service *********
2014-08-25 09:48:16:818 1328 9cac Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-08-25 09:48:16:818 1328 9cac Service *************
2014-08-25 09:48:17:313 1328 a228 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0100) ===========
2014-08-25 09:48:17:313 1328 a228 Misc   = Process: C:\Windows\system32\svchost.exe
2014-08-25 09:48:17:313 1328 a228 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-08-25 09:48:17:313 1328 a228 Service *************
2014-08-25 09:48:17:313 1328 a228 Service ** START ** Service: Service startup
2014-08-25 09:48:17:313 1328 a228 Service *********
2014-08-25 09:48:17:335 1328 a228 Agent   * WU client version 7.6.7600.320
2014-08-25 09:48:17:335 1328 a228 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-08-25 09:48:17:335 1328 a228 Agent   * Access type: No proxy
2014-08-25 09:48:17:335 1328 a228 Agent   * Network state: Connected
2014-08-25 09:49:02:380 1328 a228 Report CWERReporter::Init succeeded
2014-08-25 09:49:02:380 1328 a228 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-08-25 09:49:02:381 1328 a228 Agent   * Prerequisite roots succeeded.
2014-08-25 09:49:02:381 1328 a228 Agent *********** Agent: Initializing global settings cache ***********
2014-08-25 09:49:02:381 1328 a228 Agent   * WSUS server:
http://sccm2012:8530
2014-08-25 09:49:02:381 1328 a228 Agent   * WSUS status server:
http://sccm2012:8530
2014-08-25 09:49:02:381 1328 a228 Agent   * Target group: (Unassigned Computers)
2014-08-25 09:49:02:381 1328 a228 Agent   * Windows Update access disabled: No
2014-08-25 09:49:02:396 1328 a228 DnldMgr Download manager restoring 0 downloads
2014-08-25 09:49:02:397 1328 a228 AU ########### AU: Initializing Automatic Updates ###########
2014-08-25 09:49:02:397 1328 a228 AU   # WSUS server:
http://sccm2012:8530
2014-08-25 09:49:02:397 1328 a228 AU   # Detection frequency: 22
2014-08-25 09:49:02:397 1328 a228 AU   # Approval type: Scheduled (Policy)
2014-08-25 09:49:02:397 1328 a228 AU   # Scheduled install day/time: Every day at 3:00
2014-08-25 09:49:02:397 1328 a228 AU   # Auto-install minor updates: Yes (User preference)
2014-08-25 09:49:02:397 1328 a228 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-08-25 09:49:02:397 1328 a228 AU   # Will display featured software notifications (User preference)
2014-08-25 09:49:02:398 1328 a228 AU Setting AU scheduled install time to 2014-08-26 02:00:00
2014-08-25 09:49:02:731 1328 a228 Report *********** Report: Initializing static reporting data ***********
2014-08-25 09:49:02:731 1328 a228 Report   * OS Version = 6.1.7601.1.0.65792
2014-08-25 09:49:02:731 1328 a228 Report   * OS Product Type = 0x00000030
2014-08-25 09:49:02:737 1328 a228 Report   * Computer Brand = Hewlett-Packard
2014-08-25 09:49:02:737 1328 a228 Report   * Computer Model = HP Compaq 8200 Elite CMT PC
2014-08-25 09:49:02:738 1328 a228 Report   * Bios Revision = J01 v02.15
2014-08-25 09:49:02:738 1328 a228 Report   * Bios Name = Default System BIOS
2014-08-25 09:49:02:739 1328 a228 Report   * Bios Release Date = 2011-11-10T00:00:00
2014-08-25 09:49:02:739 1328 a228 Report   * Locale ID = 6153
2014-08-25 09:49:02:799 1328 a228 AU Successfully wrote event for AU health state:0
2014-08-25 09:49:02:799 1328 a228 AU Initializing featured updates
2014-08-25 09:49:02:799 1328 a228 AU Found 0 cached featured updates
2014-08-25 09:49:02:800 1328 a228 AU Successfully wrote event for AU health state:0
2014-08-25 09:49:02:800 1328 a228 AU Successfully wrote event for AU health state:0
2014-08-25 09:49:02:800 1328 a228 AU AU finished delayed initialization
2014-08-25 09:49:07:802 1328 8d90 Report CWERReporter finishing event handling. (00000000)
2014-08-25 10:13:25:464 1328 a228 AU ########### AU: Uninitializing Automatic Updates ###########
2014-08-25 10:13:25:508 1328 a228 Report CWERReporter finishing event handling. (00000000)
2014-08-25 10:13:25:654 1328 a228 Service *********
2014-08-25 10:13:25:654 1328 a228 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-08-25 10:13:25:654 1328 a228 Service *************
2014-08-25 10:13:26:952 1328 4f44 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0100) ===========
2014-08-25 10:13:26:952 1328 4f44 Misc   = Process: C:\Windows\system32\svchost.exe
2014-08-25 10:13:26:952 1328 4f44 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-08-25 10:13:26:952 1328 4f44 Service *************
2014-08-25 10:13:26:952 1328 4f44 Service ** START ** Service: Service startup
2014-08-25 10:13:26:952 1328 4f44 Service *********
2014-08-25 10:13:27:025 1328 4f44 Agent   * WU client version 7.6.7600.320
2014-08-25 10:13:27:025 1328 4f44 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-08-25 10:13:27:025 1328 4f44 Agent   * Access type: No proxy
2014-08-25 10:13:27:025 1328 4f44 Agent   * Network state: Connected
2014-08-25 10:14:12:113 1328 4f44 Report CWERReporter::Init succeeded
2014-08-25 10:14:12:113 1328 4f44 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-08-25 10:14:12:113 1328 4f44 Agent   * Prerequisite roots succeeded.
2014-08-25 10:14:12:113 1328 4f44 Agent *********** Agent: Initializing global settings cache ***********
2014-08-25 10:14:12:113 1328 4f44 Agent   * WSUS server: <NULL>
2014-08-25 10:14:12:113 1328 4f44 Agent   * WSUS status server: <NULL>
2014-08-25 10:14:12:113 1328 4f44 Agent   * Target group: (Unassigned Computers)
2014-08-25 10:14:12:113 1328 4f44 Agent   * Windows Update access disabled: No
2014-08-25 10:14:12:113 1328 4f44 DnldMgr Download manager restoring 0 downloads
2014-08-25 10:14:12:114 1328 4f44 AU ########### AU: Initializing Automatic Updates ###########
2014-08-25 10:14:12:114 1328 4f44 AU   # Approval type: Scheduled (User preference)
2014-08-25 10:14:12:115 1328 4f44 AU   # Scheduled install day/time: Every day at 3:00
2014-08-25 10:14:12:115 1328 4f44 AU   # Auto-install minor updates: Yes (User preference)
2014-08-25 10:14:12:115 1328 4f44 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-08-25 10:14:12:115 1328 4f44 AU   # Will display featured software notifications (User preference)
2014-08-25 10:14:12:115 1328 4f44 AU Setting AU scheduled install time to 2014-08-26 02:00:00
2014-08-25 10:14:12:371 1328 4f44 Report *********** Report: Initializing static reporting data ***********
2014-08-25 10:14:12:371 1328 4f44 Report   * OS Version = 6.1.7601.1.0.65792
2014-08-25 10:14:12:371 1328 4f44 Report   * OS Product Type = 0x00000030
2014-08-25 10:14:12:381 1328 4f44 Report   * Computer Brand = Hewlett-Packard
2014-08-25 10:14:12:381 1328 4f44 Report   * Computer Model = HP Compaq 8200 Elite CMT PC
2014-08-25 10:14:12:382 1328 4f44 Report   * Bios Revision = J01 v02.15
2014-08-25 10:14:12:382 1328 4f44 Report   * Bios Name = Default System BIOS
2014-08-25 10:14:12:382 1328 4f44 Report   * Bios Release Date = 2011-11-10T00:00:00
2014-08-25 10:14:12:382 1328 4f44 Report   * Locale ID = 6153
2014-08-25 10:14:12:496 1328 4f44 AU Successfully wrote event for AU health state:0
2014-08-25 10:14:12:497 1328 4f44 AU Initializing featured updates
2014-08-25 10:14:12:497 1328 4f44 AU Found 0 cached featured updates
2014-08-25 10:14:12:497 1328 4f44 AU Successfully wrote event for AU health state:0
2014-08-25 10:14:12:497 1328 4f44 AU Successfully wrote event for AU health state:0
2014-08-25 10:14:12:497 1328 4f44 AU AU finished delayed initialization
2014-08-25 10:14:12:498 1328 4f44 AU #############
2014-08-25 10:14:12:498 1328 4f44 AU ## START ## AU: Search for updates
2014-08-25 10:14:12:498 1328 4f44 AU #########
2014-08-25 10:14:12:564 1328 4f44 AU <<## SUBMITTED ## AU: Search for updates [CallId = {6BB38417-0601-472A-8E40-3AC101204669}]
2014-08-25 10:14:12:564 1328 47f8 Agent *************
2014-08-25 10:14:12:564 1328 47f8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-25 10:14:12:564 1328 47f8 Agent *********
2014-08-25 10:14:12:564 1328 47f8 Agent   * Online = No; Ignore download priority = No
2014-08-25 10:14:12:564 1328 47f8 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-08-25 10:14:12:564 1328 47f8 Agent   * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2014-08-25 10:14:12:564 1328 47f8 Agent   * Search Scope = {Machine}
2014-08-25 10:14:14:651 1328 47f8 Agent   * Found 0 updates and 6 categories in search; evaluated appl. rules of 29 out of 66 deployed entities
2014-08-25 10:14:14:674 1328 47f8 Agent *********
2014-08-25 10:14:14:674 1328 47f8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-25 10:14:14:674 1328 47f8 Agent *************
2014-08-25 10:14:14:674 1328 63d0 AU >>## RESUMED ## AU: Search for updates [CallId = {6BB38417-0601-472A-8E40-3AC101204669}]
2014-08-25 10:14:14:674 1328 63d0 AU   # 0 updates detected
2014-08-25 10:14:14:674 1328 63d0 AU #########
2014-08-25 10:14:14:674 1328 63d0 AU ## END ## AU: Search for updates [CallId = {6BB38417-0601-472A-8E40-3AC101204669}]
2014-08-25 10:14:14:674 1328 63d0 AU #############
2014-08-25 10:14:14:674 1328 63d0 AU No featured updates notifications to show
2014-08-25 10:14:14:675 1328 63d0 AU Setting AU scheduled install time to 2014-08-26 02:00:00
2014-08-25 10:14:14:675 1328 63d0 AU Successfully wrote event for AU health state:0
2014-08-25 10:14:14:675 1328 63d0 AU Successfully wrote event for AU health state:0
2014-08-25 10:14:17:496 1328 47f8 Report REPORT EVENT: {FD2A1084-E566-42D0-8594-505AD2F32CCD} 2014-08-25 10:14:12:497+0100 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content
Install Reboot completed.
2014-08-25 10:14:17:503 1328 47f8 Report CWERReporter finishing event handling. (00000000)

Hi Jesper,Thanks for that. I ran the detect now command as per above.
I can access the URL: http://sccm2012:8530/selfupdate/wuident.cab
Machine is still status Not yet reported.
I ran reg query HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
and it returns:
C:\Users\lyn>reg query HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
    TargetGroupEnabled    REG_DWORD    0x1
    TargetGroup    REG_SZ    computers
    WUServer    REG_SZ
http://sccm2012:8530
    WUStatusServer    REG_SZ
http://sccm2012:8530
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
Regards,
Niall

All computers showing no status, not yet reported!.

I have reinstalled WSUS role on Server 2008 R2 , but it shows all computers with no status, ip address unknown, operating system Windows 0.0 , and not yet reported. I have installed it 7 days ago. I also installed kb2720211. At download status it
is downloading 9319 mb of 63256 mb (at this moment) . Do i have to wait till it finish downloading all updates and than thay will start replying or is any problem with WSUS ?
1122

A few questions here...
Why did you destroy the content store when you uninstalled WSUS?
Why are you downloading ==63GB== of files????? (How many updates did you approve???)
Are any of the client systems Windows 8 or Windows Server 2012?
Did you install KB2720211 before launching the synchronization or after? before approving the multitude of updates, or after?
If it's showing NoStatus/NotYetReported for the clients, and the server has been online seven days (and still only downloaded =9GB=?), then you need to start by looking in a WindowsUpdate.log and see why the client(s) are failing to communicate with the
WSUS server.
My guess would be that the installation of KB2720211 did not complete successfully.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

SD report on sales which have been delivered but not yet billed

Dear all,
Do we have any SAP SD standard report showing a total of the value (preferably by sales office) of sales which have been delivered but not yet billed.
Client has a legacy system which shows report showed up goods which have been PGI'd/delivered but not invoiced - this is exactly what what is required in SAP report.
Thank you in advance,
Sastry

Sastry,
I have used this report "Sales office Analysis- Invoiced Sales - MC-E"
I found something on this forum i.e
VL06F - general delivery list / List of outbound deliveries,
VL06T - outbound deliveries for transportation planning
I dont know if it is useful in any way.
Sridhar.

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Outlook 2013 Clients certificate has expired warning or not yet valid

Hello,
We had been through a migration from exchange 2010 to 2013 in the last year but have had an ongoing issue with
some Outlook clients getting a certificate warning after they launch the client. Not all Outlook clients experience this. We've just recently uninstalled exchange from our 2010 servers and shut them
down. What we have left are two 2013 servers in a DAG. The certificate these Outlook clients are complaining about had expired in 2012. Here is the warning they are getting:
"Certificate has expired warning or not yet valid"
I've been through numerous threads/sites regarding this error but it always ends up that there was an expired cert hanging out somewhere. I cannot seem to find an expired cert anywhere...
I've ran the 'Get-ExchangeCertificate | fl' cmdlet and I see 7 certs listed, none of which match the thumbprint on the Cert Warning on Outlook.
When I check the registry of the Exchange servers here: HKLM>Software>Microsoft>SystemCertificates>My>Certificates
I can see 7 certificate entries listed there and the thumbprint matches those of the cmdlet ran from
EMS.
OWA shows the correct cert expiring in 2015 and Outlook clients are pointed to the 2013 servers. We do have a load balancer that AutoDiscover, OWA, SMTP are going through.
It seems like some of these Outlook clients are still looking at the decommissioned 2010 Exchange servers' old certificate. Any ideas on how I can get outlook to point to the new certificate/server?
Thanks.
Rory
Rory Schmitz

Hi Rory,
If possible, could you please post the Get-ExchangeCertificate | FL results about the certificate which is assigned with IIS service here?
If the issue only happens for some users instead of all users, please create a new Outlook profile for the problematic user to check whether the issue persists. Please make sure the certificate name which is reported as expired or not valid is included
in the IIS service certificate in your Exchange 2013.
In Exchange server side, please restart IIS service by running IISReset /noforce from a command prompt window to have a try.
Regards,
Winnie Liang
TechNet Community Support

Some Clients Not Updating. Reporting "Compliant." hr=8007000E Error in WindowsUpdate.log

I have a significant number (but not all) of my SCCM 2012 R2 CU3 clients not updating though my SCCM software updates. On these problem clients, I get this error in WindowsUpdate.log:
"COMAPI WARNING: ISusInternal::GetUpdateMetadata2 failed, hr=8007000E"
Then these machines report "Compliant" even though they don't install the updates. Almost all of our workstations are Windows 7 SP1 32bit. We are running SCCM 2012 R2 CU3. My site servers are running Windows 2008 R2.
I don't see much in WUAhandler.log or scanagent.log. These client are however, getting my SCEP definition updates just fine. (I have an ADR for those.) And when you go out to Microsoft for security updates it works. I have tried all of the usual Windows
Updates repair suggestions (re-register dlls, rename software distribution folder, etc.) And I tried un-installing and re-installing the SCCM client on a problem PC, to no avail. I also tried using a Software Update Group with fewer updates (<100) and targeting
a problem system with only that SUG, to no avail.
Any assistance would be greatly appreciated. Thank you.

Hi all,
One of the bigger nuissances of this particular bug is that it's hard to identify from a central location that you've fallen victim to it. Without spot-checking client machines you'd be none-the-wiser. This most likely results in a lot of shops out their
thar are completely unaware they have a security issue with a false sense of "fully patched" security.
I've create the following guidelines to identify whether you are indeed one of the victims.
create a script configuration item.
Select All Windows 7 32 bit as the supported platform
Use String as the data type
Choose powershell as your script language of choice
Paste the following text in the discovery script:select-string-pattern'GetWARNING:
ISusInternal::GetUpdateMetadata2 failed, hr=8007000E'-path"$env:windir\windowsupdate.log"
Add the configuration item to a Configuration baseline
Deploy the configuration baseline to All Windows 7 32bit machines
The report list of assets by compliance state for a given baseline is a good report to check the results.
!!!! Any machines reporting compliant to this baseline have a serious issue as they won't install any software updates, yet report compliant on all !!!!
Good luck
Hi, Does the configuration item need any kind of compliance rule setup to make it work?

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

Operation not yet implemented when exporting crystal report to pdf

Thank you in advance,
When running the line **** export within the following code, I am getting the following error message:
"Error in File C:\DOCUME1\rborda\LOCALS1\Temp\TimeDetailTest {00DC8730-45CD-4A29-8854-C44BBD5B5230}.rpt: Operation not yet implemented."
I tried the following solution registering dlls, but still did not solve the problem above:
regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\crtslv.dll"
regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\ExportModeller.dll"
regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\tslv.dll"
CODE:
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports CrystalDecisions.ReportAppServer
Imports CrystalDecisions.Web
Imports CrystalDecisions.ReportSource
Partial Public Class _Default
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    End Sub
    Private Sub btnRunReport_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnRunReport.Click
        'Try
        Dim ConInfo As New CrystalDecisions.Shared.TableLogOnInfo
        Dim oRptDoc As New ReportDocument
        Dim expo As New ExportOptions
        Dim oDiskFileDestinOption As New DiskFileDestinationOptions()
        Dim strCrystalReportFilePath As String
        Dim strPdfFileDestinationPath As String
        Dim crParameterDiscreteValue As ParameterDiscreteValue
        Dim crParameterFieldDefinitions As ParameterFieldDefinitions
        Dim crParameterFieldLocation As ParameterFieldDefinition
        Dim crParameterValues As ParameterValues
        strCrystalReportFilePath = "C:\TimeDetailTest.rpt"
        strPdfFileDestinationPath = "C:\TimeDetailTest0814.pdf"
        oRptDoc.Load(strCrystalReportFilePath) 'loads the crystalreports in to the memory
        'Create parameter objects
        'Provide Parameter values
        crParameterFieldDefinitions = oRptDoc.DataDefinition.ParameterFields
        crParameterFieldLocation = crParameterFieldDefinitions.Item("StartPeriod")
        crParameterValues = crParameterFieldLocation.CurrentValues
        crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
        crParameterDiscreteValue.Value = #7/6/2008#
        crParameterValues.Add(crParameterDiscreteValue)
        crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
        crParameterFieldLocation = crParameterFieldDefinitions.Item("EndPeriod")
        crParameterValues = crParameterFieldLocation.CurrentValues
        crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
        crParameterDiscreteValue.Value = #8/2/2008#
        crParameterValues.Add(crParameterDiscreteValue)
        crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
        'Export Information
        oDiskFileDestinOption.DiskFileName = strPdfFileDestinationPath    'path of file where u want to locate ur PDF
        oRptDoc.ExportOptions.DestinationOptions = oDiskFileDestinOption
        oRptDoc.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
        oRptDoc.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
       oRptDoc.Export()
    End Sub
End Class

I got the same error message when trying to export a report to Excel format. This happened with an existing report that had always exported with no problem, until I added a couple of new formulas. After investigating, I discovered that one of my formulas was returning a divide by zero error if a date range was too small. Once I fixed that formula, it began exporting again with no problem. I discovered this by trying to export to PDF (since all of the situations discussed here involved PDF) and that was when it returned the divide by zero error.

Error While Executing Report - "Field symbol has not yet been assigned."

Dear All,
I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
Based on this Cube I had developed a report.
0MRP_CONTRL characteristic filled using 0MATERIAL master data.
Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
Also getting dump in tcode ST22.
This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
Please help.
Regards,
Divyesh Khambhati.

Hello Shashank,
Thanks for your reply.
No material is not checked for authorization relevant.
Is it required to make 0MATERIAL to be checked as Authorization relevant ??
I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
Divyesh Khambhati
Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

AP Down Payment Invoice not yet Draw Report

Hi All,
I'm trying to make a query of the AP Down Payment Invoice not Yet draw Report. Can any one tell me which table I should refer when I need to make a query? I checked the ODPO tables that's no field indicate that the Downpayment not yet draw. I also tried the ODPI table when I use that to draw the downpayment invoice to AP invoice. When I query that table it return me 0 line.
Please advice.
Looking forward advice and reply.
Thank you.
Regards,
Foong Yee

AP Down Payment Clearing Account has debit balance if it is not drawn to AP invoice.
Use General Ledger Report,Select AP Down Payment Clearing Account,Select this G/L account,
Select reqd. posting dates,Click Ok.
Now you can see AP Down Payment Invoice not yet Draw Report.

Loaded data is not yet visible in Reporting (see long text)

hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?

Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson)

Report to know the Materials not yet costed

Hi Experts,
Can anyone suggest a standard Report to know the Materials not yet costed in ECC.5
Thanks and Regards

Dear Pradeep,
There are 2 ways of addresing this issue,
1.Either create a new material status in T Code OMS4 which throws an error message related to production order,purchase order
creation and assign it to the materials(products) which does not have any released cost estimate.
Once after taking the cost estimate you can remove this setting from the material master.
2.The other way is using user exitrs which checks whether the material has a released cost estimate or not.
Check and revert back.
Regards
Mangalraj.S

WSUS - Forefront Client definition update not yet been downloaded

Hi! I need help about
Definition Update for Microsoft Forefront Client Security - KB977939 (Definition 1.167.1978.0)
I have WSUS 3 SP2 and this definition appears like approved but the file for this update have not yet downloaded
i downloaded the definition on Microsoft Catalog but i don't now how deploy in my clients with wsus automatically
where save the package ?
thanks !

Hi,
Mostly, update will only be downloaded after approval. So please confirm if you have approved it.
Since you have downloaded it from Microsoft catalog, you can import it into WSUS server.
Step 3 Import and Export: Copying Metadata from Database
http://technet.microsoft.com/en-us/library/cc720437(WS.10).aspx
Hope this helps.

'Query has not yet calculated' When executing BW report in Bex

Hi, all
There is message 'Query has not yet calculated' when execucting BW report in BEx.
what's the reason? How to solve this issue?
however, when I change the filter to one or several employee number such as employee information report, there will be one or several records in the report.
Anyone can help me?Thanks very mcuh.
Carina

ok.
While using exception aggregation, you need to give a reference characteristics. You might have given 0calday for the same for 0ANSALARY ( SUM LAS ) and your infoprovider does not have 0calday and the report is unable to calculate the result based on 0calday.
This will obviously throw and error but you will be able to see the result. But the result will not calculate last sum for 0ansalary correctly.
For this, please check the infoprovider design. You can use reference character other than 0calday and make sure that, the reference time characteristics is present in your infoprovider.
Cheers
Chanda

Client not yet reported

Similar Messages

Maybe you are looking for