Client tools not authenticating via Windows AD after upgrade to SP4

We recently upgraded our test environment to SP4 to correct a problem we were having with Windows AD authentication from InfoView. The upgrade to SP4 and JDK 1.5 solved our InfoView problem, but our client tools (Designer, Desk, Crystal Reports) can no longer login to our test environment using Windows AD authentication.
The error message we get when trying to connect to the SP4 instance using Designer or Deski is as follows:
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Internal error.(hr=#0x80042a01)
Enterprise authentication continues to work as normal. My first thought was that my client tools are at the SP2 level and they are trying to connect to an SP4 instance. Therefore, I need to upgrade the client tools to the SP4 level as well in order to get Windows AD authentication to work. Is this correct, and if so what is the proper way to upgrade the client tools to SP4?
On the SAP download site you can download the SP4 Full install, but when you run it says to uninstall the existing version first which I haven't tried yet. Does the SP4 full install give the option to do a client install versus a server install like previous SP2 install?

While we always recommend matching versions I have rarely seen a problem with client tools and AD using different versions. I think you may have a different issue.
If your clients were installed from a deski/designer ONLY install then you can use a client version of SP4 that is much smaller. There should also be a server version that can be installed on top of deski/designer+ client tools (this should not require an uninstall). Finally there is an integrated build which includes the full XIR2 product with SP4 built in(it sounds like you downloaded this).
If SP4 does not resolve I'd suggest opening a message with support and packet scanning the client with netmon or wireshark.
What's the error you get with crystal using AD? There was a known issue on SP3 client patch that made all clients fail with AD/LDAP.
Regards,
Tim

Similar Messages

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

Did it work with previous ii.x version?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

ITunes will not open on Windows Vista after upgrading to new version

After installing the latest version, my iTunes will not open. I have uninstall and reinstall two times and still nothing, any suggestions or tips?

King Penguin set you on the right track. It's probably security software not recognizing the new version of itunes, and blocking it.
http://support.apple.com/kb/TS3125

Firefox 3.6.x will not start on Windows Vista after upgrading from 3.5.13

I have tried to upgrade Firefox 3.5.x (currently 3.5.13) to several versions of Firefox 3.6.x (currently 3.6.10). Whenever I try to open Firefox after the 3.6.x install, nothing happens. This occurs even if I uninstall 3.5.x first. If I uninstall 3.6.x and reinstall 3.5.x everything works fine.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Tirefox will not load in windows 7 after upgrade but is ok in linex(error taking too long to connect)

my harddrive is partitioned 50/50. 1st half has windows 7 on it and 2nd half has ubuntu 11.10.
Since latest upgrade of firefox the linex runs ok. but the windows 7 will not connect and gives error "taking too longto connect"
I have tried deleting firefox and reloading yo no avail.

The windows update sometimes creates issues. I've had this happen to me two times. I rolled back to the Firefox 8 and didn't have any problems, however one thing you can try is to increase your timeout range and try that. If its loading fine in linux we have to assume its not systemic, but is an OS issue. How long does it hang before you get the error?

Spotify does not install in Windows 10 (After upgrading Windows 7 to Windows 10)

I din't have spotify in Windows 7 when I upgraded to Windows 10. Now that I am in Windows 10 I am trying to install spotofy and all I see is the endless "downloading spotify" and it stays for more than 12 hours like that, then I am trying to close it and abort the installation and it has been another 6 hours now with the window 'spotify installer .. Aborting" message Anyone with similar issue ? ADDED:After restarting a couple of time, then I used the new browser Edge to download it and it installed fine. Seems like I had hit a nag when I did tried to installed it before, don't know if the server was to busy and it didn't downloaded, but this time it worked and now I'm fine.

Just a quick tech question, was you by chance on a normal user account without Admin rights when trying to install the Spotify desktop app? Just curious so I can point users to this issue so you get credit for finding a fix?

OBIEE 11g BI Admin tool not working on Windows 7 64bit - Any alternative???

Hi Experts,
I installed OBIEE 11G on Win 7 64 bit after a long struggle it went well but the admin tool is not starting..........After a search in the forum i came to know that 64 bit os can run obiee client tools. is there any work around for this? I don't want to move to 32 bit os again after taking this much struggle in installation.............can any one suggest me an alternative to work with admin tool. Using VMware 32 bit windows is an option but I don't want to go with it.
Bellow is the screen shot of the error.
http://img42.imageshack.us/img42/9389/biadmintoolerror.png
Thanks in advance,
DK
Edited by: user12296343 on Sep 19, 2010 6:28 PM

"There is currently no standalone, Windows 64‐bit Oracle Business Intelligence Client Tools installer, however the Windows 32‐bit Oracle BI client tools are compatible with 64‐bit Windows platforms per the certification document."
Source: Oracle Business Intelligence Developer Client Tools Installer (11.1.1.3.0)
http://download.oracle.com/otn/nt/bi/111130/biee_11.1.1.3_client_install_README_13_JAN_2011.pdf
The Certification Document: System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
Tab: Current System Certificatin
Row: 46

530 5.7.1 client was not authenticated

OK, I am not in control of an exchange server. My company uses GoDaddy for our exchange server. I am an employee. We use a software for contact management. When I try to send emails to say a group of customers, it gives me the error
530 5.7.1 client was not authenticated. I have talked to GoDaddy until I am blue in the face to no avail. Everything I find says it is something on their end. By the way, we just switched to them, we have absolutely no problem with our previous
company that we had exchange with. ANY help would be appreciated. OF course our outlook works.
The only information our software (called RPMS) requires is the SMTP server which I enter smtp.ex3.secureserver.net
my email address (*****@alliedsm.com
user name which they say is the same as email address (*****@alliedsm.com) and password. My old exchange service had me use port 27, but new company says I have to use 587.

In the outbound smtp setting did you set outgoing smtp requires authentication?
Microsoft Outlook® 2007 (PC)
From the Tools menu, select "Account Settings"
Select your Network Solutions Email account and click the "Change" button above..
Click the "More Settings" button in the bottom-right corner of the E-Mail Accounts window.
In the Internet Email Settings window, click the "Outgoing Server" tab. Ensure that the box next to "My outgoing server (SMTP) requires authentication" is checked and "use same settings as my incoming mail server" is selected.
Click the "Advanced" tab and make sure that "Use the following type of encrypted connection" is set to "None" for the incoming (POP3) and the outgoing (SMTP) port settings. Change the outgoing server port to 587.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Error in receiver Mail adapter: Client was not authenticated

Hi.
My requirement is to send email via PI to an extermal mail address. I am trying to use the following configuation for the same.
Tramsport Protocol: SMTP
Message Protocol: XIPAYLOAD
URL: To get the value of URL, execute transaction SCOT in PI system. Double click on SMTP and get the Mail host from there (name). So the URL has been specified as smtp://name
Comfigure User authentication - Checked
User: My outlook email address
Password: My outlook email password
From: My outlook email address
To: External address to which the email needs to be sent
Content encoding: base64
But the email is not getting sent. when I check the adapter engine I see the errors:
Mail: error occured: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
MP: exception caught with cause com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Adapter Framework caught exception: Failed to call the endpoint
Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated.
Can anyone please suggest what changes are needed to make this work?
Any help is greatly appreciated.
Thanks.
Anuradha.

HI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen

530 5.7.1 Client was not authenticated - Exchange 2013 to external domains

Hi all,
I have an Exchange server 2013 on windows 2012 R2 and do all the configuration for sending and receiving the mail according to the document provided by Microsoft.
But whenever I am trying to send mails from external domains to my exchange server domain I got the following error:
530 5.7.1 Client was not authenticated
Same thing I am getting If I am sending mail through outlook from my Exchange domains to external domain.
But if I am selecting the
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">Anonymous
users in the security option of Default Frontend XXXX, I am able to send the mails through outlook.</label>
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">But I don't
want to use this option as it will enable to send the mails without validating the Exchange server user name and password.</label>
SO can anyone please suggest some solutions to resolve this as using Anonymous users fro sending and receiving mails is not secure.
Regards
Pankaj Raman.
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">
</label>

I have a java code for sending mails using the SMTP address of the servers. For sending a mail it required a valid user name and password. For all other SMTP servers if I have used invalid user name and password then I am getting the 530
5.7.1 Client was not authenticated error, but
if I am using my SMTP address and invalid user name and password then also I am able to send the mails.
So I just want to know what I have to configure in the exchange 2013 server so that it will validate the user name and password.
Regards
Pankaj Raman.
Hi Pankaj,
Thank you for your question.
Was invalid user name and password included in Java code?
Did outlook send emails?
If this issue happen on Java code instead of outlook?
In fact, Exchange server didn’t validate user account and password, user account and password will be validated on domain controller,
I suggest we create a new dedicated receive connector and enable “anonymous” permission for java code
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.

Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue?

In 4.1 BO Client Tools not able to find data source for BVM

Hi All,
In 4.1 BO Client Tools not able to find data source for BVM
Its creating issue .
So if any body have any solution please let me know.
Regards,
Abhishek

java.lang.NoSuchMethodError: org.w3c.dom.Node.getTextContent()Ljava/lang/String;
     at customertree.XmlLoader.readData(XmlLoader.java:127)
     at customertree.XmlLoader.<init>(XmlLoader.java:69)
     at customertree.CustomerTreeFinal.jbInit(CustomerTreeFinal.java:240)
     at customertree.CustomerTreeFinal.init(CustomerTreeFinal.java:858)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source
     at java.lang.Thread.run(Unknown Source)and then inside the code... this is where i get my first error
clients.setRowId(list2.item(i).getTextContent());

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

Remote Server returned '530 5.7.1 Client was not authenticated'

Hello,
I migrating from Exchange 2007 to Exchange 2013.
The Exchange 2007 infrastructure look like:
-2 CAS ( Hub1 and Hub2)
-2 MBX ( mbx1 and mbx2)
We add Exchange 2013 in the mix
2 CAS ( CAS-2K13-1 and CAS-2K13-2)
2 MBX ( MBX-2K13-1 and MBX-2K13-2)
All mailbox are curently on Exchange 2007. All inbound email pass by a SMTP Relay who forward the email to a NLB of Exchange 2013.
The send connector (internet) forward email to the SMTP relay, and the source server are only 2K7 server.
My problems is : if I replace the two 2K7 server from the source server for the 2K13 MBX, I receive this message:
The following organization refuse your message: MBX-2K13-1.contoso.com
Generation server : MBX-2K13-2.contoso.com
[email protected]
MBX-2K13-1.contoso.com
Remote Server returned '530 5.7.1 Client was not authenticated'
idea?

Do you smarthost from the send connector to another SMTP gateway?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

5.7.1 Client was not authenticated

hey,
I need to send mail over "daily tasks, and i get the following exception :
System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
I check the user to see if he not a locked, and he doesn't .
I check the smtp mail server ans he is ok.
what else can i check? how can i fix this? this is super urgent.
this is my code :
MailMessage mess = null;
Attachment attach = null;
SmtpClient smtp = null;
try
mess = new MailMessage();
smtp = new SmtpClient("smtp.office365.com");
smtp.Port = 587;
smtp.EnableSsl = true;
System.Net.NetworkCredential cred = new System.Net.NetworkCredential("[email protected]", "Pass");
smtp.Credentials = cred;
mess.From = new MailAddress("[email protected]");
mess.Subject = fileName;
smtp.Timeout = 300000;
smtp.Send(mess);
catch (SmtpFailedRecipientException exp)
Console.WriteLine(exp.FailedRecipient);
log.Error(exp);
elog.WriteEntry(exp.ToString(),EventLogEntryType.Error, 0);
catch (Exception e)
Console.WriteLine(e.ToString());
log.Error(e);
elog.WriteEntry(e.ToString(), EventLogEntryType.Error, 0);
finally
attach.Dispose();
mess.Dispose();
smtp.Dispose();

Check if the client connector used to connect with the 587 port is allowed to accept authentication on Plain Text.
Try a relay connector if you want to send the email without the authentication.
http://technet.microsoft.com/en-us/library/bb232021(v=exchg.141).aspx
Syed MM Messaging SME - IBM || MCTS || MCSE || MCSA || VCP5 || VCA ||

Client tools not authenticating via Windows AD after upgrade to SP4

Similar Messages

Maybe you are looking for