Clients not receiving addresses from DHCP

I have a Cisco 2811 router and have configured it to be a DHCP server at a remote site. It seems like it should be pretty straight forward to configure DHCP. Apparently I'm missing something because I can't get clients to receive an address. Below are the applicable parts of the config. I also have tried associating the DHCP pool with the Claims vrf and that did not work either.
ip dhcp excluded-address 10.10.30.0 10.10.30.99
ip dhcp excluded-address 10.10.30.201 10.10.30.255
ip dhcp pool Claims_Office
   network 10.10.30.0 255.255.255.0
   domain-name fmi.com
   default-router 10.10.30.253
   dns-server 10.10.10.191
   lease 7
interface FastEthernet0/0
description Claims Office
vrf forwarding Claims
ip address 10.10.30.253 255.255.255.0
duplex auto
speed auto
no mop enabled
interface FastEthernet0/0/0.1205
description Claims Office
vrf forwarding Claims
encapsulation dot1Q 1205
ip address 192.168.103.2 255.255.255.252

Unfortunately that didn't work. Here is the output before:
Pool Claims_Office :
Utilization mark (high/low)    : 100 / 0
Subnet size (first/next)       : 0 / 0
Total addresses                : 254
Leased addresses               : 0
Pending event                  : none
1 subnet is currently in the pool :
Current index        IP address range                    Leased addresses
10.10.30.1           10.10.30.1       - 10.10.30.254      0
And after:
Pool Claims_Office :
Utilization mark (high/low)    : 100 / 0
Subnet size (first/next)       : 0 / 0
Total addresses                : 254
Leased addresses               : 0
Pending event                  : none
1 subnet is currently in the pool :
Current index        IP address range                    Leased addresses
10.10.30.1           10.10.30.1       - 10.10.30.254      0
What I want is for it to assign addresses from 10.10.30.100-199

Similar Messages

Simple contact form Client not receiving email from test site

I have entered my client's verified email, cut and pasted it into place. I have added my email and my wifes email. The only person not getting the forms email info is my client. I'm baffled.

The URL for the site is getthenetbassguide com.businesscatalyst.com/index.html. I have added several peoples email address', including my own to the back end of the form. As I've said the only person not receiving emails is my client who opened an account with 1 and 1. I contacted 1 and 1. They show no spam filters on their end so I'm still baffled. I asked about firewall permissions and they were not helpful. Is there a way to monitor the email and see what could be blocking it?
Owen Moore
Moore Designs
847-732-1318
[email protected]
Freshbrewedart.com
Sent from my iPhone

Not receiving IP from DHCP

I have (2) networks going into an ap 1200 - the AP has a static ip set on it as 192.168.199.210 which is vlan 20
the other network is from my DSL to have wide open wireless for guests (vlan100) that ip in the router is set at 192.168.199.51 (scope is set not to interfere)
I get the ssid to the client but fails to get an ip address.
I have vlan 1,20,100 trunked on the switch. what am i missing here. thanks

You need to have a router to route between the VLANs, specifically from the Native VLAN (where your DHCP service is probably located) to the VLAN 100 segment.
You'll also need to have some kind of IP HELPER / DHCP forwarding on the VLAN 100 client-side of the router pointing to the DHCP service IP address.
Even though the VLANs are physically located on the same device, they cannot talk to each other without a Layer 3 device to pass the traffic from broadcast domain (VLAN) to broadcast domain (VLAN).
Good Luck
Scott

I'm not receiving emails from 2 specific domains to my .mac email. Both have the correct address and I don't have any rules set up. Anyone know why this is happening?

I'm not receiving emails from 2 places. I don't have rules set up and both senders have the correct address. The messages aren't in my junk folder either. This is for my.mac account. Anyone know how to fix?

That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
Check Mail -> Preferences -> Viewing -> Show header detail
I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.

Not receiving emails from a certain address

Myslef or my wife, both of which have icloud emails, are not receiving emails from a relator business. We are able to send emails to them, they receive them, but on their reply, we don't get them. I have tried adjusting the spam filters, to no avail. The realtor is able to send email just fine to my work email, but not to either of our me.com addresses.. why would this be? Does anyone have any ideas? We receive email just fine from many other sources.. however, who knows how many emails we haven't received because of this.
Thanks,
Brian

I am having the same problem not getting emails from 'some' people to my me.com addresses. I can send and they receive but I don't get their replies. If they cc my yahoo.com address I do get them there.
Tonight I tried to get 2 free songs from this band http://www.thelimousines.com/ . I tried all variations of mac.com and me.com but never got the download song link. On a whim I tried using my yahoo.com address and I got a reply immediately. Something is wonky. If you figure it out please post it here. Thanks

Not receiving email from certain addresses

Hi, I have a problem of not receiving email from a number of email addresses. I don't have a spam folder ... not sure what is causing this. The sender receives a msg back that my email address has 'fatal errors and message cannot be delivered'. My quota is fine and I receive other emails.
Any idea where I can rectify the problem?
Thanks
Magz

I suppose I should list my external DNS settings as well. I don't know if this has anything to do with it, but according to DNSCog, the mailexchangers IP is not reporting reverse DNS. Again, I don't have DNS set up on the server, so I don't know if that is causing the issue.
DNS is hosted on everydns.com.
*Host - Type - Value - MX - TTL*
*.domain.tld - A - [My IP address] - - 3600
domain.tld - A - [My IP address] - - 3600
domain.tld - MX - mail.domain.tld - 10 - 3600
servername.domain.tld - A - [My IP address] - - 3600

Not receiving emails from certain people/clients?

Hi like the tiltle says, i'm not receiving emails from certain clients.
it doesnt even go into spams, there is no trace at all... like it was never sent
this makes me worries about how many other emails i've never received
this particular domain is a domain that i own, and hosted on a dedicated server (i'm the one sending the emails) i was doing tests before moving that specific site to BC.
i've tested with a bunch of other accounts that i own and i'm receiving them no problem on my gmail account, and other accounnt that i have on a dedicated server)
But from that specific domain ie: thatdomain.com i'm am not receiving anything in any accounts of my partner domain.
where should i look?
help
Doesnt help me loving BC, i'v been having a bunch of deceptions ever since i "made the big move"

Just FYI, everyone here is just a fellow user. .Mac employees provide no technical support here and probably never read any of these posts. If you want to contact .Mac support, you need to fill out and submit the form on this web page. When you fill out the form, provide as much detail as possible - the most important items will be the domain(s) (i.e. someplace.com) that the problem emails are being sent from.
Good luck.

Can not receive emails from third party email accounts

Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally.
This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
Thanks a lot!!
Sammy

Checklist for testing inbound email problems, I am assuming outbound emails works ok.
1. Check Port 25 forwarding on all modems routers/firewalls
2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
3. If using POP Connector Service, make sure POP accounts are created properly
4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

ICloud password but I forget why I sent in the mail verification is not received mail from apple icloud

iCloud password but I forget why I sent in the mail verification is not received mail from apple icloud
<E-mail Edited by Host>

You are not addressing Apple here. We are all just users like yourself. It's not a good idea to post your private email on a public forum.

AP gets always a new IP address from DHCP server

Hello,
When an access points doesn't find a controller it gets always a new IP address from DHCP server.
Does anyone know, why?
thanks

Hi,
From what I know this is to do with DHCP option 60 and 43.Normally when APs request for IP address, DHCP Server also returns the management IP Address of WLC if the VCI matches.
If the VCI sent by the AP does not match with the one configured under DHCP for that particulart AP type, the DHCP will never return the WLC IP and hence AP can not find the controller.And the AP keeps sending DHCP Req and sometimes end up getting two IP addresses!
So may be you can check VCI on DHCP server for that AP model.
Let me know.
Cheers

Could not receive classifications from UDDI server. Please change the UDDI.

Hello:
   Im trying to connect from CE in Visual Composer to the
    UDDI url: http://xi.esworkplace.sap.com:50200/uddi/wsdl/uddi_v3_service.wsdl
   but when I try to explore advance search in VC it shows me the following error:
   Could not receive classifications from UDDI server. Please change the UDDI server.
   Any idea?
Thanks
Regards
Mario G

Hi,
The one that Mario is saying is not in NWDS its in CE I guess. I too face the same difficulty. I give the following details that I did in my local CE. After saving the setting I tried to clickd service registry I get some list of errors. Kindly help me and Mario in resolving this. Thanks in advance.
Between Mario the URL of the UDDI and classification is changed now... please note the details that I have set.
==================================
Destination Type: WSDL
Destination Name: UDDI_DESTINATION
URL: http://sr.esworkplace.sap.com/uddi/wsdl/uddi_v3_service.wsdl
System: Java
Authentication : HTTP Authentication
User ID/Password (Basic)
User ID: sruser
Password: eswork123
====================================================
Destination Type: WSDL
Destination Name: CLASSIFICATION_DESTINATION
URL: http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl
System: Java
Authentication: HTTP Authentication
User ID/Password (Basic)
User ID: sruser
Password: eswork123
====================================================
Create new destination Create new backend destination HU2
Destination Type: Services Registry
Destination Name: HU2
System: ABAP
System Name: HU2
Hostname: iwdf1030
Installation Number: 0120003411
Client: 800
Authentication: HTTP Authentication
User ID/Password (Basic)
User ID: <your user in HU2>
Password: <your password>nation CLASSIFCATION_DESTINATION
==============================================
Best Regards,
Suresh

I am not receiving emails from at least one person.

I am not receiving emails from at least one person. The emails don't show up in my Junk mailbox and they do not get an email that there email did not go through. Their address is in my mail recipients list. Does anyone know why this is happening? Is there somewhere else that email get's filtered? If there is somewhere else, I'd like to fix it so that this users emails get sent through. I'm very concerned that there could be other people that are trying to send me emails that are getting through that I may not even know about yet. Thanks for any help that you can lend.

Hi Ricardo,
Contact iTunes Support:
http://support.apple.com/kb/HE57
Cheers,
GB

Not receiving emails from one specific domain

Hi,
I'm having problems with not receiving emails from one specific domain @youmail.dk. It hasn't been an issue earlier, but I stopped receiving the emails late last year. For all I know this is the only domain there's a problem with - I don't have any problems with any other random domain.
There is no rules or anything like that set up, so I have no idea what the problem could be... There's no "failure to deliver" notification send to the sender either.
It doesn't matter if I check iCloud online, on my MacBook or iPhone...
Can anyone help me?
Nina.

Comcast Security Assurance manages email system security and should be able to help you with this. Call them at 1-888-565-4329 (from http://constantguard.comcast.net/dedicated-support/). They will probably want to know the IP address(es) and/or host name(s) of the sending email server(s).
The first-line reps at CSA are sometimes not so helpful. If so, be persistent, and keep at them until you get a satisfactory answer.

Switched from iphone to galaxy - now not receiving texts from iphone users

Switched from iphone to galaxy for multiple reasons. Still keeping my iPad and wanted to use my iphone for music. Now I am not receiving texts, apparently imessages, from iphone users - there is no notification either way that a message was not received. So iphone users think I have received a text when I haven't. This makes me angry with Apple as there have been medical issues in our family and I have not been receiving important communication. I also have clients I have not received texts from. My understanding is I will have to delete my iphone from my apple account completely, but then will not be able to use it at all for itunes or anything else.

If you still have the iPhone, go to Settings and turn off iMessage. If you don't have the phone or if that doesn't solve the problem, contact Apple Support and request that they deactivate iMessage. https://www.apple.com/support/appleid/contact/

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

Clients not receiving addresses from DHCP

Similar Messages

Maybe you are looking for